Commit the upstream source tarballs the mock builders consume so a build never
has to fetch them from the network -- offline/reproducible builds, and
resilience to upstream URL rot for these older releases:
- ipmitool/ipmitool-1.8.18.tar.gz (re-normalized to the release tarball)
- syslinux/syslinux-6.03.tar.xz
- perl-Crypt-SSLeay/Crypt-SSLeay-0.72.tar.gz
The per-package builders use the local tarball when present and only fall back
to the upstream URL if it is missing (ipmitool/syslinux mockbuild.pl; and
mockbuild-perl-packages.pl 'spec' mode for perl-Crypt-SSLeay).
Also folded in:
- mockbuild-all.pl: switch createrepo -> createrepo_c (--database,
--set-timestamp-to-revision) for deterministic, upstream-matching repo
metadata.
- perl-HTTP-Async / perl-Net-HTTPS-NB specs: reword the brp-compress comment.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
Register conserver-xcat in mockbuild-all.pl's dep-builder set so the
traditional C conserver (8.2.1) is built per-EL/arch alongside goconserver.
xCAT itself requires goconserver, so conserver stays a build-on-demand
artifact, but wiring it into the full dep build keeps it produced and
signed with the rest of xcat-dep for sites that want it.
conserver/mockbuild.pl gains the --build-timestamp option that
mockbuild-all passes to every builder (SOURCE_DATE_EPOCH for deterministic
builds); without it the child invocation would abort on an unknown option.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
conserver.spec had not been built on a modern EL toolchain and no longer
compiled on EL9/EL10:
- %prep used the bare %patch / %patch1 macros, which rpm 4.18+ (EL9/EL10)
rejects with "Patch number not specified". Switched to explicit
Patch0:/Patch1: with the numbered %patch0/%patch1 macros, which apply
cleanly on EL8 through EL10.
- BuildRequires listed only openssl-devel, so on EL9/EL10's minimal mock
buildroot the toolchain was absent and %configure failed with
"C compiler cannot create executables". Added gcc, make and glibc-devel.
Also add conserver/mockbuild.pl, a standalone per-EL builder matching the
other xcat-dep builders (goconserver/ipmitool): it stages the sources and
spec, builds the SRPM, mock-rebuilds it in the target chroot, copies the
RPMs to --result-dir, and smoke-tests console/conserver in the chroot.
conserver is not in the default mockbuild-all.pl set (xCAT uses goconserver),
so this builder is run on demand. Built + smoke-tested conserver-xcat-8.2.1
for alma+epel-{8,9,10}-x86_64.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
mockbuild-all.pl treated xnba-undi/grub2-xcat as x86-only @SHARED_NOARCH imported
onto ppc, so an x86 build failure rippled into a fatal "grub2-xcat missing" on
ppc; both actually build on any arch (noarch repackaging of committed artifacts)
and xCAT requires them on ppc too. Un-gate xnba-undi and drop the import so each
host builds a complete, self-sufficient dep repo. Add a single --output that
re-roots all NFS-shared output plus a fail-fast lock at <output>/.lock (owner-pid
guarded so forked build children do not delete it). Default gpg-key-name to the
real "xCAT Signing Key" and --xcat-source to ../xcat-core.
Make concurrent builds safe: give the genesis buildrpms.pl its own HOME/rpmbuild
tree (a shared /root/rpmbuild raced across parallel targets), and nest the
xnba/goconserver rpmbuild dirs under the run-scoped --work-dir (they hard-coded
/var/tmp/xcat-rpmbuild-* and wiped each other). Add --parallel-targets/--max-parallel,
defaulting to serial since the per-package scripts still share repo tarballs under
full parallelism.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
grub2-xcat/mockbuild.pl fetched a grub2 source RPM before building, and that
fetch was the only failing step (the pinned CentOS Stream URL now 404s, and the
dynamic dnf fallback is fragile on EL10). The download is dead weight: the
package is a pure noarch repackaging of the committed grub2-res.tar.gz and the
mock build never consumed the src.rpm. Remove the resolve+download machinery.
Epoch: 1 stays so 1:1.0 satisfies xCAT-server's legacy >= 2.02 pin and upgrades
over old 0:2.02 remain clean.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
xCAT Requires xnba-undi and grub2-xcat on every arch, but they only build on x86_64
(xnba-undi is an x86 UNDI netboot ROM; grub2-xcat wraps the distro grub2). Since both
are noarch, a ppc build now imports them from a built x86_64 dep repo via the new
--import-noarch-repo <dir>. Both are added to the required-deps assertion (with a hint
to pass --import-noarch-repo on non-x86_64 builds), so an incomplete dep repo fails at
build time instead of at xCAT install time.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
xCAT-server Requires: grub2-xcat >= 2.02-0.76.el7.1.snap201905160255, but the el10
rewrite reset grub2-xcat to Version 1.0 -- which can never satisfy that. Add Epoch: 1
so 1:1.0-2 outranks 0:2.02 and the (unchanged) xCAT-server dependency resolves.
Also stop pinning the upstream grub2 source rpm URL (the distro rolls grub2 forward
and prunes the old src.rpm from the mirror -> 404). grub2-xcat/mockbuild.pl now
resolves the current grub2 source rpm URL via dnf (download --source --url, then
repoquery --location) unless --upstream-url is given.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
mockbuild-all.pl now assembles a signed, deployable xcat-dep repo under
--repo-dep/rh{8,9,10}/<arch>, each with xcat-dep.repo, mklocalrepo.sh and
buildinfo.txt, ready to push to xcat.org (obsoletes cluster-test.pl's dep
collection). Default build loops rh8/rh9/rh10 for the host arch only; --target
still selects a single target. xCAT-genesis-base is collected into each per-EL
repo. New options: --repo-dep, --gpg-sign, --gpg-key-name, --gpg-home. No dhcp-
packages are built (DHCP is a rich dep in xCAT.spec), so nothing to exclude for el10.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
Commit f6f8640 added the /var/lib/goconserver datadir so goconserver can create
its nodes.json store and makegocons can register consoles, but kept Release: 2.
The fixed build then shared an identical NVR (goconserver-0.3.3-2) with the
pre-fix build, so a stale pre-fix -2 could be (and was) served to management
nodes where makegocons still failed ("open /var/lib/goconserver/nodes.json: no
such file or directory"). Bump Release to 3 so the datadir fix is a distinct,
upgradeable version that cannot collide with the pre-fix -2.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
xCAT-genesis-base's dracut initramfs bundles the build chroot kernel +
glibc/busybox/perl, so it is OS-dependent and cannot ship in the single flat
xcat-core. Build it here, per target, via buildrpms.pl --package
xCAT-genesis-base (which derives the same snap Release from xcat-core Gitepoch,
matching xCAT-genesis-scripts). Add --skip-genesis to opt out.
In the split pipeline (--skip-xcat) the orchestrator (cluster-test.pl) routes
the resulting genesis-base from the xCAT dist tree into the per-EL xcat-dep
repo -- robust to this script exiting non-zero on tolerated dep-builder
failures -- so this script no longer collects the xCAT dist tree in that mode.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
perl-HTTP-Async and perl-Net-HTTPS-NB fail to build on openSUSE Leap 15
for two reasons. First, the patch is applied with "%patch 0 -p1"; rpm
4.14+ no longer accepts the space-separated number form and aborts %prep
with "%patch without corresponding Patch: tag" -- the supported spelling
is "%patch0 -p1". Second, %files is driven by a version-filelist built
during %install that records the man pages as *.3pm, but openSUSE's
brp-compress then gzips them to *.3pm.gz, so %files fails with "File not
found" for every man page. Disable the install-post hooks with
%define __os_install_post %{nil} (harmless for these noarch pure-perl
modules) so the packaged names match the file list.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
On openSUSE Leap 15 (OpenSSL 3) the build fails compiling
src/plugins/lan/auth.c with "unknown type name MD2_CTX". OpenSSL 3
removed MD2 from the default provider but still installs a stub
openssl/md2.h, so configure's AC_CHECK_HEADER probe succeeds and defines
HAVE_CRYPTO_MD2 -- yet MD2_CTX and the MD2_* functions no longer exist,
so auth.c's MD2 code path will not compile. Export
ac_cv_header_openssl_md2_h=no in %build to force the probe negative,
selecting the existing no-MD2 branch (which just warns that MD2 IPMI
authcodes are unsupported -- an obsolete, insecure scheme). Systems with
a real md2.h are unaffected.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
perl-HTTP-Async and perl-Net-HTTPS-NB used the bare-number "%patch 0" form,
which only rpm >= 4.18 (EL10) understands. On EL8 (rpm 4.14) and EL9 (rpm 4.16)
the SRPM build fails with "%patch without corresponding Patch: tag", so neither
perl-HTTP-Async 0.30-3 nor perl-Net-HTTPS-NB 0.14-3 could be rebuilt for rh8/rh9
and the 2.17 -> 2.18 upgrade reported "nothing provides" for both.
Use the portable "%patch -P 0" form so the patch applies on EL8/EL9/EL10.
The syslinux-xcat subpackage is BuildArch: noarch but deliberately bundles the
arch-dependent PXELINUX/SYSLINUX bootloader blobs under
/opt/xcat/share/xcat/netboot/syslinux. EL10 rpm does not flag these real-mode
binaries, but EL8/EL9 rpm aborts the build with "Arch dependent binaries in
noarch package", so syslinux-xcat 6.03 could not be rebuilt for rh8/rh9 and the
2.17 -> 2.18 upgrade had no syslinux-xcat >= 6.03-1 to satisfy xCAT 2.18.
Set %_binaries_in_noarch_packages_terminate_build 0 so the self-contained xcat
netboot payload builds across EL8/EL9/EL10.
Vinícius Ferrão
Daniel Hilst