A case passed when its fixture could not run it, and a fixture passed a
stage it left out. provfixture skipped the HTTP stage when the web server
answered 404 for the xCAT aliases, which is the regression P-32 to P-39
exist to catch. It ran the discovery and petitboot scenarios only when
the file under test already existed. CI prints a passing case's output
nowhere, so none of this was visible.
A failed check, a skipped stage and a missing discovery or petitboot
file now fail the case. The DHCP phase fails when only one backend is
installed, since both are shipped.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
Every DHCP step listened for its whole timeout, even after the reply it
waited for had arrived. The 15 DISCOVERs of pxe-arch-matrix.conf took
30 seconds on a management node that answers in milliseconds.
A step now stops at the first reply of the type it expects. A step that
asserts on offers, or expects none, still listens for the whole timeout,
because it must hear every server or prove that none answered.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
A DHCP step recorded a test point only for each assertion. A step with
expect = none and no assertion, such as S-07's discover on a *NOIP*
port, recorded nothing and passed when the server answered.
The DHCP client now reports its expectation the way a service step
does: expect none is met by silence, any other value by a reply of that
type. The runner records it as a test point of its own.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
noip-interface-is-denied (S-07) is one discover step with
expect = none and no assertion. The DHCP client records test points
only for assertions, so the scenario emits none and passes whether or
not the server answers the *NOIP* port.
These tests run that step against a fake wire, silent and answering,
and require a scenario to state an assertion or an expectation. They
fail until a DHCP step reports its expectation.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
dhcptest and provtest carried two copies of the config loader, the
assertion language, the $step.field substitution, the TAP reporter, the
error types and the CLI. The copies had already drifted: list equality,
multi-line regex and CIDR membership behaved differently in each.
blackboxtest keeps one of each. A step type table in steps.py declares
the keys, required keys and reply fields of every type, and the runner
dispatches to the DHCP client or to the dig, tftp, curl and xcatd
clients. One scenario can now use a DHCP reply in a TFTP step.
The shipped scenarios move unchanged to conf/dhcp/ and conf/prov/. Their
scenario, step and assertion lists are identical to the old ones. The
wire cases and fixtures move to autotest/testcase/blackboxtest/, and CI
runs one offline phase instead of two.
Removed because no scenario or fixture used them: the pretty and json
reports, --pcap, --mac, the discover subcommand, the decline, inform
and sleep steps, assert_all, select, and the keys dhcptest accepted and
ignored.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
dhcp_ddns_policy.t and dhcp_isc_expression_grouping.t called BAIL_OUT
when a routine was missing or the plugin could not be read. prove stops
every remaining file on a bail-out, so one of them hides the results of
every test that would have run after it. die is just as loud and costs
only its own file.
Three facts in this branch were each written out in four places. That
SIGHUP reports success before Kea reads the file appears in Kea.pm twice
and in dhcp.pm again; that an installed node netboots when no boot file
reaches it appears in BootPolicy.pm and three times in dhcp.pm; the
dhcpd grouping rule appears in BootPolicy.pm and in the test header. Each
now stands once, without the symptom narration and the defect history
around it.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
specs/dhcp-wire.md gained a feature for the name the cluster's DNS learns --
S-74 to S-78. Four of the five had nothing asserting them, and dhcptest could
not send option 81 at all, so the scenario a client uses to claim a name could
not be written.
dhcptest gains a `fqdn` step field carrying option 81, with the RFC 4702 flags
written as a prefix (`S:node01`, `N:node01`, `E` for wire format). It gains two
targets: `fqdn_flags` for the flag letters, and `dns_name` for the name the
reply says the node will be known by -- option 81 when the server sent one,
option 12 otherwise, because Kea answers an option 81 request in option 81 and
ISC under `ignore client-updates` answers in option 12 only. That is the same
shape as `bootfile`.
netboot-methods.conf asserts S-75 twice, once for a name claimed in option 12
and once in option 81. dhcp_ddns_policy.t asserts S-76, S-77 and S-78 on both
backends.
Checked against kea-dhcp4 2.4.1 and isc-dhcpd 4.4.3-P1 on xcat26-mn: both
scenarios fail on a server with no per-node name and pass on one that has it.
Four mutations of the code under dhcp_ddns_policy.t are each caught.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
addnet and addnet6 each build the zone and key statements that let dhcpd
update the cluster's DNS. The two copies drifted: addnet writes "primary" only
when a server is known, addnet6 writes it unconditionally and emits
"primary ; key xcat_key;" for a network whose nameservers are unset. Neither
copy can be driven from a test, because both sit in the middle of a routine
that needs the whole plugin's globals.
isc_ddns_zone_statements takes the decision and returns the lines. The callers
keep the side effect and the _omapi_settings lookup. addnet6 gains addnet's
guard, and a network with neither a ddnsdomain nor a domain now writes no zone
at all rather than "zone . {".
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
S-35 in specs/dhcp-wire.md now requires the node's own name whatever the
client advertised, and new S-74 requires the same name in the lease and in the
DNS update. The two checks that assert them cite neither.
The Kea reservation check in dhcp_kea_plugin_intent.t cites S-74, which is
marked [config] because no client can observe the recorded name. The
netboot-methods.conf step cites S-35 and says which half it cannot see.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
kea_node_reservations in xCAT-server/lib/xcat/plugins/dhcp.pm writes the node
name only as the reservation's host-name option. Kea reads the lease name and
the DDNS name from the reservation's "hostname" field, so with that field
absent it uses the name the client put in option 12. A node that calls itself
"ubuntu" -- which the Ubuntu installer does -- gets the DNS record for the
node's address and is told "ubuntu" back.
The reservation carries the hostname field again. The host-name option stays,
so a server that sends it verbatim still sends the short name.
The field is qualified by Kea 2.4 before it reaches option 12, so a node on a
cluster with DDNS is told "node01.cluster" where ISC says "node01". S-35 in
netboot-methods.conf asserts the label rather than the whole option for that
reason, and dhcp_kea_plugin_intent.t asserts the field is present.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
A Kea host reservation written by kea_node_reservations carries the node's
name only as a host-name option. Kea takes the name for the lease and for the
DDNS update from the reservation's "hostname" field, and with that field
absent it takes the name the client advertised instead.
Measured with kea-dhcp4 2.4.1 on a veth pair, ddns-qualifying-suffix
"cluster.local.", a reservation for 192.0.2.50 and a client sending option 12
"otherdesk":
hostname field absent option 12 -> otherdesk.cluster.local
lease -> otherdesk.cluster.local (fqdn fwd+rev)
hostname field present option 12 -> node01.cluster.local
lease -> node01.cluster.local
dhcp_kea_plugin_intent.t now asserts the reservation carries the hostname
field, and netboot-methods.conf adds S-35 "a node advertising another name is
still told its own". The existing S-35 step matches the node's label rather
than the whole option, because a server that qualifies the name with the
cluster domain has still answered with the node's own name.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
_decode in provtest_lib/httpc.py builds the reply's "ok" field from the HTTP
status alone. curl writes the status as soon as the response header arrives,
so a connection closed in the middle of the body, or a transfer killed by
--max-time, still produces status 200. The http.conf scenario that fetches the
kernel and initrd "byte for byte" then reads a partial file as served.
The reply already carries the reason curl gave. "ok" now also requires that
reason to be absent.
xCAT-test/provtest/tests/test_parsers.py asserts it for a body cut short
(curl exit 18) and for a timeout while reading the body.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
The provtest HTTP client reports success from the status line alone. curl
prints the status as soon as the response header arrives, so a server that
closed the connection in the middle of a kernel, or a transfer that ran out
of time, still leaves a reply that reads 200 and ok.
Two cases assert that a reply is not ok when curl did not finish: a body cut
short (curl exit 18) and a timeout while the body was being read. Both fail
before the fix.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
The README named a file in a repository most readers of this one cannot
open. The clause tags on the scenarios already carry what the pointer was
for: a failure names the clause, and anyone holding the specification can
find it from the tag alone.
The dhcp-named-file scenario said its file name came from an observed
DHCP acknowledgement. Nothing here speaks DHCP: the caller spells the
name, dhcptest asserts that xCAT sends it, and this asserts it can be
fetched.
The scenario table had fallen behind four files, and two real gaps were
unwritten anywhere: the x509cert form of getcredentials, whose CSR a
wire test cannot fabricate meaningfully, and the absence of copycds --
the install tree the nodes point at is fabricated.
credentials.pm:138-143 signs nothing unless the callback port named in
the request is below 1024, because only root can bind one -- a high
port would let any user on a node collect the cluster's keys.
The suite asserted the closed-port half of that and not this one. The
new scenario puts a listener up on a high port and asks to be called
back there, so a callback arriving is one xcatd chose to make rather
than one the client failed to answer.
P-55 chooses between four sources for imgserver and every one of them
held the same address, so the assertion could not say which won. The
node now has a tftpserver of its own on a second address, and imgserver
is asserted to be it and not site.master.
chain-advances asserted only that two answers differ; it now names the
state, boot, which nodeset leaves in chain.currchain (destiny.pm:550).
And the postscript is read for NODE, MASTER, SITEMASTER and DOMAIN --
four renderings from three sources -- and for any directive that
survived into the body.
The kickstart template carried no directive, so mkinstall rendered it
correctly by doing nothing; it now carries a #TABLE: per node and an
#INCLUDE:, and the fetched autoinst is asserted to hold the expanded
values and no directive or #INCLUDEBAD:.
The postscripts listing is walked as a node walks it: a name taken out
of the index, then that leaf fetched -- Indexes and the alias are
separate directives, and a tree listed but unreadable fails every
postscript at once.
And the kernel and initrd the config names are fetched over both
transports and compared by sha256.
The two loops that undefine the netboot and extra nodes read their list on
standard input, and the xCAT clients called inside them read standard input
too: makedhcp swallowed the rest of the file on the first iteration, so the
loop ended after one name. A full run left fourteen node definitions on the
machine, and the state directory was deleted regardless, so nothing
recorded what had been left.
Both loops read on file descriptor 3, as the provtest teardown already
does. Each removal is checked and teardown keeps its state directory when
one fails. Verified on both backends: no dhcptest node survives a run.
run_cases counts the Passed and Failed lines a run prints, so a case that
crashed before either one was counted nowhere and the phase reported
success over cases that never ran. Each phase now knows how many cases it
asked for and fails when the verdicts do not add up.
A failed query for the case list returned an empty list, which read as a
phase with nothing to do; it is a failure now. A backend whose setup failed
runs its teardown before the next one starts, rather than leaving the
machine configured for a backend that is no longer under test.
The CI runner is Ubuntu, where the program is grub-mkimage and not
grub2-mkimage, so the fixture built no loader; grub2.pm writes no
configuration at all for a node whose loader is missing, setup died on the
node every later stage needs, and all eight wire cases failed for that one
reason.
Both names are tried now, and the EFI and BIOS module trees under either
/usr/lib/grub or /usr/lib/grub2. Where none of that exists the node is set
with xnba instead, and the stages that read a grub2 config say which
assertions they left out. The workflow installs grub-common and
grub-efi-amd64-bin so the runner tests the grub2 path itself.
check answered only yes or no, so a machine holding an earlier run's nodes,
interface or namespace passed every wire case without running one -- and
went on doing that until someone looked. It now answers three ways: run,
cannot run and the case passes, or refuse, which fails the case. Leftovers
and a cluster with nodes of its own are refusals; PROVTEST_ALLOW_LIVE and
DHCPTEST_ALLOW_LIVE opt in.
The empty-cluster message from lsdef is no longer counted as a node. ss is
required rather than assumed, since without it every port probe answered
yes. Each skipped stage is counted and the total printed. The DNS removal
stage puts the name back and proves it resolves before asserting that it
does not.
Teardown removed nodes, restored tables and unpacked the saved zone tree
without checking any of it, then deleted the state directory regardless.
A restore that half-failed left the machine wrong and the record of what
to put back gone.
Every removal and restore is checked now. The zone archive is verified
when written and listed again before the live tree is removed, so an
unreadable archive leaves the tree alone. Anything that fails keeps the
state directory and returns non-zero. The kickstarts mkinstall renders
under autoinst are removed by name, and the loader moved aside during the
absent-loader stage stays in tftpdir rather than under /tmp.
makedns looks up the server of each zone it writes and qualifies it with
site.domain. On a cluster whose networks name their server as
<xcatmaster> that name is this machine's own, inside the fixture's
domain, which nothing resolves -- so makedns failed and every wire case
died in setup. It passed where the other networks name no server and the
lookup fell back to site.nameservers, an address.
Add the qualified name to /etc/hosts, which teardown already restores.
Both fixtures record what they are about to change so teardown can put
it back, and both truncated that record on entry. A setup run while one
was already up therefore saved the fixture's own site table, dhcpd.conf
and /etc/hosts as the originals, and the veth and namespace it no longer
knew about survived the teardown that followed.
Refuse when the state directory is there, naming the teardown to run.
P-70 asserts that the name DHCP sends can be fetched, but the fixture
passed the architecture's loader as that name. DHCP hands a grub2 node
the per-node name instead, so deleting it left the whole suite green
while a real node would TFTP a file that is not there.
Pass boot/grub2/grub2-<node>, which is what dhcptest asserts is sent.
The scenario stays out of the run where no loader is on disk, since the
per-node name is a link to it.
The branch's own comments had grown to explanations of the reasoning
behind each decision. Trim them to the fact and its consequence: why a
line exists, and what breaks without it. Long blocks come down to a
hundred words, most to twenty or fewer, and the file headers keep only
their usage tables and the invariant each suite rests on.
No code changes. Every unit test, scenario validation and syntax check
still passes.
Four repetitions, each of them a place for a later edit to be made in
one copy and not the others:
- the settings every scenario is given, retyped at nineteen calls
beside a helper that built them and was never called;
- three unit-name lookups with identical bodies;
- the node reset two stages open with;
- the eight settings the three ordering scenarios share.
tftpdir and installdir are asked of xcatd once rather than nine times
in a stage, and the name encodings now call provtest's own netutil
rather than a second implementation in shell that no test covers.
The comment named only the DHCP cases; the provisioning ones are kept
out of that phase for the same kind of reason -- they add an
interface, nodes, a network and a rewritten zone.
A management node can end up with a web server that is not the one
xcatconfig configured -- a stock nginx holding port 80 in front of the
httpd whose xcat.conf carries the aliases. It answers 404 to every
path a node is ever given, so P-22's kernel fetch failed in a way that
read like a broken boot script, and the whole HTTP stage would have
failed nine times for one reason.
The fixture now probes the aliased directories before asserting
against them. P-21 and P-22 are separate scenarios, so the script is
still asserted where the kernel cannot be, and the HTTP stage skips
with the reason rather than failing.
Every loop over a list of names ran the xCAT clients on standard
input, so the first client read the rest of the file and the loop
ended after one name. Teardown said it had removed the fixture while
five nodes, an osimage, a network and an unrestored site table were
still there, and the next setup recorded those leftovers as the state
to restore to. The loops now read on descriptor 3.
`nodeset offline` is not enough either: it gives up when it cannot
reach the DHCP backend and never removes the staged kernel and initrd.
The artefacts the fixture's own nodes and images can produce are now
removed by name.
check refuses on any leftover node, not just the first.
The provisioning cases go where a node meets them: after the whole
ci_test set, so they are not reconfiguring the machine underneath it, and
before the DHCP phases.
run_provtest_unit_tests runs the offline half first -- the Python suite
and a parse of every scenario -- so a file that does not even load is
reported as that rather than as a case failure, and skips rather than
fails when python3 is absent. run_prov_wire_test then runs the prov_wire
cases once, not once per backend: nothing in them depends on which DHCP
server is installed, and what a node is told over DHCP is dhcptest's
subject.
Ten cases: two offline ones labelled ci_test, the unit suite and a parse
of every shipped scenario, and eight wire cases labelled prov_wire, one
per stage of the chain a node walks -- DNS, loader and config, install
tree, genesis and discovery artefacts, discovery requests, the xcatd
protocols, the install monitor, and the three failures that look alike
from a console.
The wire cases are deliberately not ci_test: while one runs the
management node has an extra veth pair and namespace, four nodes, a
rewritten zone and possibly a moved http port. Each restores all of it
from a trap, and each passes with a message when the host cannot host it.
provfixture.sh holds every xCAT command; the scenarios read none of it.
Running the scenarios against a live management node found nine places
where they asserted something xCAT does not do. Corrected here, each with
the reason in the file:
- install configs carry no xcatd= or destiny=; those are written for the
genesis states only.
- #END OF SCRIPT is plain-transport framing; over TLS a reply ends with
<serverdone>.
- getcredentials is named in <arg> and answered as <data><content/>
<desc/></data>, so both fields are addressable now.
- currstate for an install is "install <osimage>", so the operator is
starts-with.
- bootparams is empty for an ordinary install, so kernel and initrd
cannot be asserted from getdestiny.
- a server never reached sends no <error>; assert the handshake instead.
- an NXDOMAIN answer is the expected result of a removal scenario.
- P-75 has to precede P-74: a withdrawn name cannot be nodeset again.
Also adds netutil.hex_net: a per-network config is named by as many hex
digits as the netmask covers, not by all eight.
The fixture falls back to a checkout when the installed tree is absent,
and the relative path was one level short: from
autotest/testcase/dhcptest it has to climb to xCAT-test, not to
autotest. In a checkout the fallback therefore resolved to nothing and
every case skipped, silently and with a pass.
Which credential is wanted is named in <arg>. A request without one
reached a dereference of an undefined array ref, so xcatd died inside the
plugin and shipped the Perl error back to the client instead of ignoring
the request.
Check for the element before the callback is made, and log and drop the
request the same way a bad callback port is dropped. A client that sends
a malformed request now learns nothing about the server, which is the
point: this path hands out cluster certificates to anything whose address
resolves.
Both spec.md files are design documents for this organisation: they argue
about what xCAT ought to put on the wire, cite the plugin lines that decide
it, and record where the original proposal was wrong. Shipped under
xCAT-test/ they would land in an RPM on every management node and be offered
upstream as part of a test directory, which is not what they are for.
They now live in the internal repository as specs/dhcp-wire.md and
specs/provision-chain.md. The suites keep their clause tags, so a failing
case still names the clause it belongs to.
154 tests, standard library only, no network and no root: the config parser,
the assertion language, $step.field resolution, the offline machine, TAP
output, address arithmetic, and the decoding of captured dig, curl and tftp
output -- including an NXDOMAIN whose only record is an SOA, and a TFTP fetch
that created an empty file before finding the server had nothing to send.
test_boundaries.py asserts rules about this code rather than about xCAT: only
proc.py starts a process, no module opens a database or names an xCAT command,
and no step type can run one. A suite that asked xCAT what to expect would
pass on a cluster that could not boot a node.
An assertion resolved its target through Reply.field, which collapses a list
to its first item. A name with two A records could therefore never satisfy
`data == <the second one>`, and _equal's list branch -- written for exactly
that case -- was unreachable.
Reply.whole returns the container intact and assertions use it. References
keep the old behaviour: $step.data substitutes one value into a command line,
so the first is the right answer there.
Sixteen files, fifty scenarios, one per behaviour the specification names.
The cross-stage ones are the point: a config is fetched over TFTP, the
kernel path is read out of it, and that path is fetched. No file says what
the kernel will be called, which is what separates testing xCAT from
comparing xCAT's output against a copy of it.
The four tftp-*.conf files are alternatives, not a set -- a node has one
netboot method -- and the fixture selects the one it was defined with.
conf/tftp-grub2.conf @P-70 meets dhcptest at the only shared assertion:
the boot file DHCP named is fetchable under exactly that name.
provtest asks the management node the questions a booting node asks and
asserts on the answers. DNS, TFTP and HTTP are driven by dig, curl and
tftp, so the result is what a real client sees rather than what this
tool's own protocol parser believed. The xcatd stages use sockets: they
must choose their source address, because xcatd names a client by the
reverse lookup of the address a connection arrived from.
Scenarios are declarative .conf files sharing dhcptest's assertion
grammar, exit codes and TAP output. Nothing here reads the xCAT database
or runs an xCAT command; every expected value arrives via --set.
validate and list run offline, in a checkout, with no root.
The provision chain has no specification anywhere: what a node fetches, in
what order, and what counts as a correct answer live only in the plugins
that emit the artefacts. A cluster can pass every ci_test case and still
boot nothing, because no test in the tree ever acts as a client.
spec.md states 75 clauses, @P-01 to @P-75, each citing the source that
decides it, covering DNS, TFTP, HTTP, discovery, findme, the xcatd request
verbs and the install monitor. Three clauses correct the proposal against
what xcatd actually does; Appendix A records which and why.
README.md documents the tool that runs them.
A node that has finished installing has chain.currstate "boot", and from
that point the server must stop naming it a boot file: a node given a
netboot script every time it powers on reinstalls itself forever, and does
so silently, because each individual boot looks like a successful one.
Neither backend did that. The wire suite found both.
ISC gated the whole boot-from-disk branch on $doiscsi, so the rule only
fired for a node with an iscsi table row. An ordinary installed node fell
through to the netboot branches below and its xNBA second stage was handed
its own install script. Both the xnba and the pxe branch had it; the pxe
one handed out pxelinux.0.
Kea reads "boot-file-name": "" as *unspecified*, not as "no boot file", so
the empty boot file on the node's reservation did not outrank the classes
every client shares. The always-evaluated xcat-bios class supplied
xcat/xnba.kpxe, the loader came back announcing user class xNBA, and the
per-network class then supplied the network's boot script -- so withholding
only the per-node script withheld nothing. The fix is the same mechanism the
DROP and NOIP classes already use: a xcat-localboot class holding the MACs,
and a "not member('xcat-localboot')" guard on every class that names a boot
file. Kea requires a class to be defined before it is referenced, so
xcat-localboot is written first.
iSCSI is the exception on both backends. Its root disk is on the network and
gPXE is what attaches it, so it still gets a loader: ISC keeps its $doiscsi
branch, and Kea leaves those MACs out of the class.
spec.md S-31 is rewritten to say what correct is -- no boot file at all, on
either request of an xNBA boot, whatever the netboot method -- rather than
the weaker "not its own script", which the second stage above shows is not
the same statement.
conf/localboot.conf asserts the stronger form and gains a netboot=pxe node,
since that branch is written separately and the xnba node passing says
nothing about it. dhcpfixture.sh defines it.
An assertion with != or not-in now holds against a target that is absent
from the reply: a reply naming no boot file has certainly not named the
node's install script. Every other operator still fails on absence, and
"absent" remains the way to assert absence itself.
S-35 asks both backends to tell a node its own name in option 12. The
previous attempt wrote the reservation's hostname with a trailing dot, on
the reading that a name already fully qualified is not qualified again.
That is true of Kea 3.0, which is what it was tested against, and false of
Kea 2.4, which is what Ubuntu 24.04 ships and what CI runs: it appends
ddns-qualifying-suffix regardless and the node was told
"node01.pok.stglabs.ibm.com" where ISC said "node01".
Confirmed against both versions with a reservation on a veth pair, DDNS
configured, asking for option 12:
reservation hostname "probenode." 2.4.1 -> probenode.example.test
3.0.3 -> probenode
hostname "probenode." and option-data 2.4.1 -> probenode.example.test
option-data host-name only 2.4.1 -> probenode
3.0.3 -> probenode
So a reservation's option-data cannot override the field either --
processHostnameOption adds option 12 before appendRequestedOptions runs,
and appendRequestedOptions only fills in what is not already there.
Leaving the hostname field out is the one form that answers with the
node's own name on both versions, and it is also the shape ISC has: an
option statement, separate from the ddns-hostname statement beside it.
kea_boot_for_node already emits the host-name option for every node, so
nothing needed to be added -- only the field removed.
Two consequences, both intended. Kea no longer has a per-reservation DDNS
name and will use whatever the client sends, which is what a cluster with
xCAT's own DNS already relies on; ddns-qualifying-suffix still qualifies
the dynamic clients that have no reservation. And `makedhcp -q` now reads
the name back out of the host-name option, because that is where it is.
Two gaps in what the wire suite proves, both about traceability rather than
about a new behaviour.
S-31 had no wire case. A node whose chain.currstate is "boot" has an
operating system and must be left to start it; a node handed a netboot
script every time it powers on reinstalls itself forever, and does so
silently, because each individual boot looks like a successful one. The
Kea side of this is covered by dhcp_kea_plugin_intent.t, but the ISC side
is built inline in addnode against a live database and cannot be reached
by a unit test at all.
The new case asks twice with the same MAC: once as firmware with no user
class, once announcing the xNBA user class the first stage sets. Only the
second request can be answered with the node's script, so only the second
request can see the bug. What is asserted is S-31's own wording -- not
"no boot file", which would forbid the stage-1 binary a server is entitled
to send, but "not the node's xNBA script". The node is defined with
netboot=xnba because only that method generates a second stage.
The remaining ten scenarios already proven on the wire now say which
specification scenario they prove, in the same "S-nn:" form the rest of
the suite uses. That raises the scenarios cited by a wire case from 36 to
47 of the spec's 73, without running anything new -- the coverage was
there and was not traceable.
The wire suite compared the two backends against xCAT-test/dhcptest/spec.md and
found four places where a node was told different things depending on which
daemon answered. Each is fixed at the side the spec calls correct.
Option 12 (S-35): Kea builds the host-name option out of a reservation's single
`hostname` field and runs it through ddns-qualifying-suffix on the way out, so a
node asking who it was got "node01.cluster.example.com" while ISC, which writes
option 12 and the DDNS name from separate statements, said "node01". A name that
already ends in a dot is fully qualified and is not qualified again, so the
reservation is now written "node01." -- the wire agrees with ISC, and the suffix
still qualifies the dynamic clients that have no reservation. A reservation's
option-data cannot be used for this: processHostnameOption adds option 12 before
appendRequestedOptions runs, and appendRequestedOptions only fills in options
that are not already present. Reservation lookups are made dot-insensitive so
`makedhcp -d` and `-q` keep matching a node by its bare name.
Option 43 / ISAN (S-20): Kea appends an encapsulated space to a reply only when
the option that carries it is configured too, and option 43 is `type: empty`
with `encapsulate: isan`. Naming only the isan-space sub-options left them with
nothing to travel in and the initiator was offered an address with no target, so
the empty container is now named alongside them. ISC needs no equivalent --
declaring `option isan.iqn` builds option 43 for it.
Boot file fallback (S-12): dropping an architecture branch from the ISC if/else
chain let that client fall through to the final `substring(filename,0,1) = null`
catch-all and be handed /yaboot, which is the loader substitution the spec
forbids. Suppressed architectures now get an explicit empty branch. Kea cannot
have this bug: its classes are independent and xcat-fallback excludes every
recognised arch.
Reload (S-40): `systemctl reload kea-dhcp4` returns 0 once the signal is
delivered, and Kea can then reject the config and keep serving the old one while
systemctl still reads active -- a node added by discovery was never adopted.
dhcp4 and dhcp6 intents therefore always carry a control-socket, and a reload
goes over it so the daemon reports whether it took, falling back to
reset-failed + restart when it cannot confirm.
The fixture now proves a daemon actually holds port 67 before it believes the
backend is serving, which is what turned the reload failure from a flake into a
reproducible case.
Verified on the wire against both backends on EL10 with dhcpd 4.4.3 and
kea 3.0.3: all ten cases rc=0 on each. Unit suite 848/848.
Three things the wire cases turned up, only the first of which is xCAT
answering a client wrongly -- the other two never got as far as an answer.
kea-dhcp4 would not start at all. The ONIE class named option "www-server",
which xCAT's dhcpd.conf declares as code 114 = string but which means the
standard option 72 to Kea -- a list of IPv4 addresses, so an installer URL
in one is a configuration error and the whole Kea pass of the wire cases
never ran. Naming the code instead says the same thing to both.
ISC answered a request for an address on a network it has never heard of
with silence, where the spec says DHCPNAK, because "authoritative" was
written into each subnet declaration and read from the subnet the
requested address belongs to -- which, for this case, is none of them. It
is now global as well, which is what Kea's authoritative:true already
covered.
The remaining two were the cases asking the wrong question. ISC sends an
option when the client asks for it, so an ONIE case that never put 114 in
its parameter request list could not see it however the class was
written; and the common-option case announced a PXEClient vendor class
while asserting the cluster's lease time, which is the ten-minute
firmware lease of S-51 rather than S-50. S-50 now says which clients it
is about.
siaddr comes from noderes, in an order neither backend had right. ISC
read xcatmaster only for petitboot and onie, so every other node in a
hierarchical cluster was sent to the management node rather than to its
service node -- and even for those two the address went into the URL
without going into siaddr, so one reply named two different machines.
Kea read xcatmaster for every node, but when nothing named a server it
used my_ip_facing rather than the subnet's value, which is a different
answer whenever networks.tftpserver names a third machine.
Both now read next_server_for_node: the node's tftpserver, then its
xcatmaster, then -- only for the methods that build a URL and so need an
address in hand -- the interface facing the node. A node that named none
of them inherits the subnet's value, which ISC states in the subnet and
Kea states by leaving next-server out of the reservation.
An xcatmaster that does not resolve is now an error on both rather than
silence on one: it is a misconfiguration, and sending the node somewhere
else instead hides it.
Appendix A rows 26 and 27. Unlike the rest, these two are not in
xcat-internal#175 -- the wire cases found them.
Appendix A rows 15 to 18, the remaining spec decisions where the two
backends answered the same client differently.
Row 15, a loader that is not on disk is not named. The ISC architecture
chain named every loader unconditionally, so a client whose loader was
never built spent a full TFTP timeout it could not diagnose; the Kea side
had always left the class out. The chain is now built from a list of
gated branches rather than a literal block, because dropping a branch
from a literal if/else if chain can leave a leading "} else if", which
dhcpd rejects outright.
Row 16, a *NOIP* interface draws no reply. Kea discards a packet assigned
to the class named DROP, and only one such class may exist, so every
dropped MAC in the cluster shares it and the user-context records which
node each belongs to. Syncing one node merges into that list and removing
one node prunes only its own entries, so makedhcp for a single node
cannot bring another node's interface back.
Row 17, a node that boots from disk, and row 18, a node deferring to
proxydhcp, are decided per node. Kea host reservations outrank every
client class, so the reservation has to fall silent -- an empty
boot-file-name -- and let the class carry the answer.
Rows 19 and 20 landed earlier and dictated the same shape: the
reservation names nothing and two mutually exclusive classes, one for the
vendor and one for "not the vendor", decide between them, because Kea
evaluates every class independently and has no else.
Daniel Hilst