mirror of
https://github.com/xcat2/xcat-core.git
synced 2026-11-21 09:52:17 +00:00
test(ipv6): pre.rhels10 and a dead ddns routine have no assertions
Two gaps from the same branch. ddns.pm:453 assigned "my @myips = _local_addresses_for_network(...)" and never read the value, and _local_addresses_for_network had no other caller. The routine and its three assertions in ddns_ipv6.t are removed: a test on a routine nothing calls measures nothing and keeps dead code alive. The commit that moved the shell tests to bats deleted el10_ipv6_runtime.t and wrote no bats file for pre.rhels10, so its new create_listen_socket, its peer allow list, its screendump rewrite and extract_url_host had no assertions. ipv6_pre_rhels10.bats renders the install monitor pre.rhels10 embeds, fills the two substitution tokens the way xCAT fills them, runs it and speaks its protocol over each family. It also drives extract_url_host and the expression that finds the install URL in the kernel command line, read from the script rather than retyped. Six reversions of the script were each measured: an AF_INET-only listener, a missing peer check, the os.popen screendump, the colon split of the URL, a grep that drops the bracket alternative, and a missing strip on the received command. Every one fails at least one assertion. Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
This commit is contained in:
@@ -136,19 +136,6 @@ sub handled_commands
|
||||
return { "makedns" => "site:dnshandler" };
|
||||
}
|
||||
|
||||
sub _local_addresses_for_network {
|
||||
my $network = shift;
|
||||
return unless defined($network) && length($network);
|
||||
|
||||
my $peer = $network;
|
||||
$peer =~ s{/.*$}{};
|
||||
my @facing = $peer =~ /:/
|
||||
? xCAT::NetworkUtils->my_ip_facing_family($peer, 6)
|
||||
: xCAT::NetworkUtils->my_ip_facing($peer);
|
||||
return if !@facing || $facing[0];
|
||||
return @facing[ 1 .. $#facing ];
|
||||
}
|
||||
|
||||
sub getzonesfornet {
|
||||
my $netent = shift;
|
||||
my $net = $netent->{net};
|
||||
@@ -443,7 +430,6 @@ sub process_request {
|
||||
if ($net and $net->{nameservers})
|
||||
{
|
||||
my $valid = 0;
|
||||
my @myips = _local_addresses_for_network($net->{net});
|
||||
foreach (split /,/, $net->{nameservers})
|
||||
{
|
||||
chomp $_;
|
||||
|
||||
@@ -0,0 +1,221 @@
|
||||
#!/usr/bin/env bats
|
||||
#
|
||||
# pre.rhels10 runs in the EL10 installer. It embeds the install monitor xCAT
|
||||
# asks for node status, and it reads the install server out of the kernel
|
||||
# command line. Both were IPv4 only: the monitor opened an AF_INET socket, and
|
||||
# the server was cut out of the URL at the first colon, which splits an IPv6
|
||||
# literal.
|
||||
#
|
||||
# The monitor tests render the embedded program the way xCAT renders it, run
|
||||
# it, and speak its protocol. Everything is on the loopback addresses of this
|
||||
# host; nothing reaches the lab.
|
||||
|
||||
load 'helpers/shell_source'
|
||||
|
||||
# The port the embedded install monitor listens on. It is fixed in the script.
|
||||
MONITOR_PORT=3054
|
||||
|
||||
setup()
|
||||
{
|
||||
SCRIPT="$(require_repo_file 'xCAT-server/share/xcat/install/scripts/pre.rhels10')"
|
||||
command -v socat >/dev/null || skip 'socat is required'
|
||||
command -v ss >/dev/null || skip 'ss is required'
|
||||
MONITOR="${BATS_TEST_TMPDIR}/install-monitor.py"
|
||||
XCATD_PORT=$(( 20000 + RANDOM % 20000 ))
|
||||
XCATD_PID=
|
||||
MONITOR_PID=
|
||||
}
|
||||
|
||||
teardown()
|
||||
{
|
||||
[ -n "$MONITOR_PID" ] && kill "$MONITOR_PID" 2>/dev/null
|
||||
[ -n "$XCATD_PID" ] && kill "$XCATD_PID" 2>/dev/null
|
||||
return 0
|
||||
}
|
||||
|
||||
# wait_for_port <port> -- the listener is read from ss rather than by
|
||||
# connecting, because a probe connection is a peer the monitor would answer.
|
||||
wait_for_port()
|
||||
{
|
||||
local i
|
||||
for i in $(seq 1 100); do
|
||||
ss -Hltn "sport = :$1" 2>/dev/null | grep -q . && return 0
|
||||
sleep 0.1
|
||||
done
|
||||
return 1
|
||||
}
|
||||
|
||||
# start_monitor <master> -- render the install monitor pre.rhels10 embeds,
|
||||
# fill its two substitution tokens the way xCAT fills them, serve the one
|
||||
# handshake it makes to xcatd, then start it.
|
||||
start_monitor()
|
||||
{
|
||||
local master="$1" family listen handler
|
||||
command -v python3 >/dev/null || skip 'python3 is required'
|
||||
|
||||
awk "/^cat >\\/tmp\\/foo.py <<'EOF'\$/ { copy = 1; next }
|
||||
copy && /^EOF\$/ { exit }
|
||||
copy { print }" "$SCRIPT" \
|
||||
| sed -e "s|#ENV:MASTER_IP#|${master}|g" \
|
||||
-e "s|#TABLE:site:key=xcatiport:value#|${XCATD_PORT}|g" >"$MONITOR"
|
||||
[ -s "$MONITOR" ] || return 1
|
||||
! grep -q '#ENV:\|#TABLE:' "$MONITOR" || return 1
|
||||
|
||||
case "$master" in
|
||||
*:*) family='TCP6'; listen="bind=${master}" ;;
|
||||
*) family='TCP4'; listen="bind=${master}" ;;
|
||||
esac
|
||||
|
||||
# The handshake is two lines: xcatd sends "ready", the monitor sends the
|
||||
# name it registers under, xcatd answers anything.
|
||||
handler="${BATS_TEST_TMPDIR}/xcatd.sh"
|
||||
cat >"$handler" <<'HANDLER'
|
||||
#!/bin/bash
|
||||
printf 'ready\n'
|
||||
IFS= read -r registered
|
||||
printf '%s\n' "$registered" >"$REGISTERED"
|
||||
printf 'ok\n'
|
||||
HANDLER
|
||||
chmod 0755 "$handler"
|
||||
REGISTERED="${BATS_TEST_TMPDIR}/registered"
|
||||
: >"$REGISTERED"
|
||||
# Detach the stdio of both children: one holding the test's pipes open
|
||||
# makes a failure hang instead of go red.
|
||||
REGISTERED="$REGISTERED" setsid socat \
|
||||
"${family}-LISTEN:${XCATD_PORT},${listen},reuseaddr" "EXEC:$handler" \
|
||||
</dev/null >/dev/null 2>&1 &
|
||||
XCATD_PID=$!
|
||||
wait_for_port "$XCATD_PORT" || return 1
|
||||
|
||||
setsid python3 "$MONITOR" </dev/null >/dev/null 2>&1 &
|
||||
MONITOR_PID=$!
|
||||
wait_for_port "$MONITOR_PORT"
|
||||
}
|
||||
|
||||
# ask <socat-address> <command> -- send one monitor command, print the answer.
|
||||
ask()
|
||||
{
|
||||
printf '%s\n' "$2" | socat -T3 - "$1" 2>/dev/null
|
||||
}
|
||||
|
||||
@test "an IPv6 master address makes the install monitor listen on IPv6" {
|
||||
start_monitor '::1'
|
||||
run ask "TCP6:[::1]:${MONITOR_PORT}" 'stat'
|
||||
[ "$status" -eq 0 ]
|
||||
[ "$output" = 'installing prep' ]
|
||||
}
|
||||
|
||||
@test "an IPv6 master address makes the install monitor refuse IPv4" {
|
||||
start_monitor '::1'
|
||||
run ask "TCP4:127.0.0.1:${MONITOR_PORT}" 'stat'
|
||||
[ "$output" != 'installing prep' ]
|
||||
}
|
||||
|
||||
@test "an IPv4 master address makes the install monitor listen on IPv4" {
|
||||
start_monitor '127.0.0.2'
|
||||
run ask "TCP4:127.0.0.2:${MONITOR_PORT},bind=127.0.0.2" 'stat'
|
||||
[ "$status" -eq 0 ]
|
||||
[ "$output" = 'installing prep' ]
|
||||
}
|
||||
|
||||
@test "the install monitor answers only a peer address the master resolves to" {
|
||||
start_monitor '127.0.0.2'
|
||||
run ask "TCP4:127.0.0.2:${MONITOR_PORT},bind=127.0.0.1" 'stat'
|
||||
[ "$output" != 'installing prep' ]
|
||||
}
|
||||
|
||||
@test "the install monitor registers itself with xcatd over IPv6" {
|
||||
start_monitor '::1'
|
||||
run cat "${BATS_TEST_TMPDIR}/registered"
|
||||
[ "$output" = 'installmonitor' ]
|
||||
}
|
||||
|
||||
@test "a command is recognised with leading whitespace around it" {
|
||||
start_monitor '::1'
|
||||
run ask "TCP6:[::1]:${MONITOR_PORT}" ' stat '
|
||||
[ "$status" -eq 0 ]
|
||||
[ "$output" = 'installing prep' ]
|
||||
}
|
||||
|
||||
@test "a screendump console that is not a number is refused" {
|
||||
start_monitor '::1'
|
||||
run ask "TCP6:[::1]:${MONITOR_PORT}" 'screendump x'
|
||||
[ "$output" = 'invalid virtual console' ]
|
||||
}
|
||||
|
||||
@test "a screendump argument carrying a shell command is refused and not run" {
|
||||
start_monitor '::1'
|
||||
local marker="${BATS_TEST_TMPDIR}/ran-a-shell-command"
|
||||
run ask "TCP6:[::1]:${MONITOR_PORT}" "screendump 1;touch ${marker}"
|
||||
[ "$output" = 'invalid virtual console' ]
|
||||
[ ! -e "$marker" ]
|
||||
}
|
||||
|
||||
@test "a numeric screendump console reads that virtual console and no other" {
|
||||
start_monitor '::1'
|
||||
run ask "TCP6:[::1]:${MONITOR_PORT}" 'screendump 7'
|
||||
[ "$output" != 'invalid virtual console' ]
|
||||
[[ "$output" == *'/dev/vcs7'* ]] || [ -r /dev/vcs7 ]
|
||||
}
|
||||
|
||||
# extract_url_host and the expression that feeds it. The install server is
|
||||
# read out of /proc/cmdline, where an EL10 IPv6 install writes a bracketed
|
||||
# authority.
|
||||
url_host()
|
||||
{
|
||||
local lib="${BATS_TEST_TMPDIR}/url.sh"
|
||||
extract_shell_function "$SCRIPT" 'extract_url_host' >"$lib" || return 1
|
||||
# shellcheck disable=SC1090
|
||||
. "$lib"
|
||||
extract_url_host "$1"
|
||||
}
|
||||
|
||||
@test "an IPv4 install URL yields its address" {
|
||||
run url_host 'http://192.0.2.1/install/rhels10/x86_64'
|
||||
[ "$status" -eq 0 ]
|
||||
[ "$output" = '192.0.2.1' ]
|
||||
}
|
||||
|
||||
@test "an IPv4 install URL with a port yields the address without the port" {
|
||||
run url_host 'http://192.0.2.1:8080/install/rhels10/x86_64'
|
||||
[ "$output" = '192.0.2.1' ]
|
||||
}
|
||||
|
||||
@test "a bracketed IPv6 install URL yields the address without the brackets" {
|
||||
run url_host 'http://[2001:db8::1]/install/rhels10/x86_64'
|
||||
[ "$output" = '2001:db8::1' ]
|
||||
}
|
||||
|
||||
@test "a bracketed IPv6 install URL with a port yields only the address" {
|
||||
run url_host 'http://[2001:db8::1]:8080/install/rhels10/x86_64'
|
||||
[ "$output" = '2001:db8::1' ]
|
||||
}
|
||||
|
||||
@test "a hostname install URL yields the hostname" {
|
||||
run url_host 'https://mn01.cluster.example/install/rhels10/x86_64'
|
||||
[ "$output" = 'mn01.cluster.example' ]
|
||||
}
|
||||
|
||||
# The expression that finds the install URL in the kernel command line, taken
|
||||
# from the script rather than retyped, so a change to it is measured here.
|
||||
cmdline_host()
|
||||
{
|
||||
local expression url
|
||||
expression="$(sed -n "s/^NEXTSERVER_URL=\"\$(grep -oE '\(.*\)' \/proc\/cmdline.*\$/\1/p" \
|
||||
"$SCRIPT")"
|
||||
[ -n "$expression" ] || return 1
|
||||
url="$(printf '%s\n' "$1" | grep -oE "$expression" | head -n 1)"
|
||||
url_host "$url"
|
||||
}
|
||||
|
||||
@test "the install server is found in an IPv6 EL10 kernel command line" {
|
||||
run cmdline_host 'ro inst.repo=http://[2001:db8::1]/install/rhels10/x86_64 inst.ks=http://[2001:db8::1]/install/autoinst/node01'
|
||||
[ "$status" -eq 0 ]
|
||||
[ "$output" = '2001:db8::1' ]
|
||||
}
|
||||
|
||||
@test "the install server is found in an IPv4 kernel command line" {
|
||||
run cmdline_host 'ro inst.repo=http://192.0.2.1:8080/install/rhels10/x86_64'
|
||||
[ "$status" -eq 0 ]
|
||||
[ "$output" = '192.0.2.1' ]
|
||||
}
|
||||
@@ -44,32 +44,6 @@ my $has_core_ipv6_parser = defined(&Socket::inet_pton)
|
||||
my $has_ipv6_parser = $has_core_ipv6_parser
|
||||
|| eval { require Socket6; 1 };
|
||||
|
||||
{
|
||||
no warnings qw(once redefine);
|
||||
my @families;
|
||||
local *xCAT::NetworkUtils::my_ip_facing = sub {
|
||||
push @families, 4;
|
||||
return (0, '192.0.2.1');
|
||||
};
|
||||
local *xCAT::NetworkUtils::my_ip_facing_family = sub {
|
||||
my ($class, $peer, $family) = @_;
|
||||
push @families, $family;
|
||||
return (0, '2001:db8:1::1');
|
||||
};
|
||||
|
||||
is_deeply(
|
||||
[ xCAT_plugin::ddns::_local_addresses_for_network('192.0.2.0') ],
|
||||
['192.0.2.1'],
|
||||
'IPv4 DNS-network ownership retains the legacy facing-address path'
|
||||
);
|
||||
is_deeply(
|
||||
[ xCAT_plugin::ddns::_local_addresses_for_network('2001:db8:1::/64') ],
|
||||
['2001:db8:1::1'],
|
||||
'IPv6 DNS-network ownership strips CIDR and uses the IPv6 facing path'
|
||||
);
|
||||
is_deeply(\@families, [4, 6], 'DNS-network ownership selects the matching address family');
|
||||
}
|
||||
|
||||
SKIP: {
|
||||
skip 'No IPv6 literal parser is available', 9 unless $has_ipv6_parser;
|
||||
|
||||
|
||||
Reference in New Issue
Block a user