Have SSDP ignore multicast disabled interfaces

A frequent scenario is to 'refresh' ssh configuration toward the
end of:
-changing trust nodes
-Adding a collective member
-Repairing a broken configuration
-As part of 'confluent-ifying' a node that wasn't confluent deployed

.gitignore

@@ -1,4 +1,7 @@
 *.pyc
 .*.
 confluent_client/man/man*
+.vscode
 .*.sw*
+.sw*
+.idea/*

confluent_client/bin/confetty

@@ -373,7 +373,7 @@ def do_command(command, server):
     if argv[0] == 'exit':
         if os.environ.get('TERM', '') not in ('linux'):
             sys.stdout.write('\x1b]0;\x07')
-        raise Bailout()
+        raise BailOut()
     elif argv[0] in ('help', '?'):
         return print_help()
     elif argv[0] == 'cd':
@@ -663,6 +663,28 @@ def get_session_node(shellargs):
     return None
 
 
+def run_inline_command(path, arg, completion, **kwargs):
+    tlvdata.send(session.connection, {'operation': 'pause',
+                                              'path': currconsole})
+    buffdata = ''
+    while select.select((session.connection,), (), (), 0)[0]:
+        buffdata += consume_termdata(session.connection, bufferonly=True)
+    rc = session.simple_noderange_command(consolename, path, arg, **kwargs)
+    tlvdata.send(session.connection, {'operation': 'resume',
+                                      'path': currconsole})
+    sys.stdout.write(completion)
+    sys.stdout.flush()
+    if buffdata:
+        try:
+            sys.stdout.write(buffdata)
+        except UnicodeEncodeError:
+            sys.stdout.buffer.write(buffdata.encode('utf8'))
+        except IOError:  # Some times circumstances are bad
+                         # resort to byte at a time...
+            for d in buffdata:
+                sys.stdout.write(d)
+    return rc
+
 def conserver_command(filehandle, localcommand):
     # x - conserver has that as 'show baud', I am inclined to replace that with
     #     'request exclusive'
@@ -698,13 +720,13 @@ def conserver_command(filehandle, localcommand):
         localcommand = get_command_bytes(filehandle, localcommand, cmdlen)
 
         if localcommand[1] == 'o': # off
-            print("powering off...")
-            session.simple_noderange_command(consolename, '/power/state', 'off')
-            print("complete]\r")
+            sys.stdout.write("powering off...")
+            sys.stdout.flush()
+            run_inline_command('/power/state', 'off', 'complete]')
         elif localcommand[1] == 's':  # shutdown
-            print("shutting down...")
-            session.simple_noderange_command(consolename, '/power/state', 'shutdown')
-            print("complete]\r")
+            sys.stdout.write("shutting down...")
+            sys.stdout.flush()
+            run_inline_command('/power/state', 'shutdown', 'complete]')
         elif localcommand[1] == 'b': # boot
             cmdlen += 1
             localcommand = get_command_bytes(filehandle, localcommand, cmdlen)
@@ -715,59 +737,46 @@ def conserver_command(filehandle, localcommand):
                 bootmode = 'uefi'
                 bootdev = 'setup'
 
-                rc = session.simple_noderange_command(consolename, '/boot/nextdevice', bootdev, bootmode=bootmode)
+                rc = run_inline_command('/boot/nextdevice', bootdev, '', bootmode=bootmode)
 
                 if rc:
                     print("Error]\r")
                 else:
-                    rc = session.simple_noderange_command(consolename, '/power/state', 'boot')
+                    rc = run_inline_command('/power/state', 'boot', 'complete]')
                     if rc:
-                        print("Error]\r")
-                    else:
-                        print("complete]\r")
+                        print("Error]")
 
             elif localcommand[2] == 'n':  # boot to network
-                print("booting to network...")
-
+                sys.stdout.write("booting to network...")
+                sys.stdout.flush()
                 bootmode = 'uefi'
                 bootdev = 'network'
-
-                rc = session.simple_noderange_command(consolename, '/boot/nextdevice', bootdev, bootmode=bootmode)
-
+                rc = run_inline_command('/boot/nextdevice', bootdev, '', bootmode=bootmode)
                 if rc:
                     print("Error]\r")
                 else:
-                    rc = session.simple_noderange_command(consolename, '/power/state', 'boot')
-
+                    rc = run_inline_command('/power/state', 'boot', 'complete]')
                     if rc:
                         print("Error]\r")
-                    else:
-                        print("complete]\r")
-
             elif localcommand[2] == '\x0d':  # boot to default
                 print("booting to default...")
 
                 bootmode = 'uefi'
                 bootdev = 'default'
 
-                rc = session.simple_noderange_command(consolename, '/boot/nextdevice', bootdev, bootmode=bootmode)
+                rc = run_inline_command('/boot/nextdevice', bootdev, '', bootmode=bootmode)
 
                 if rc:
                     print("Error]\r")
                 else:
-                    rc = session.simple_noderange_command(consolename, '/power/state', 'boot')
-
+                    rc = run_inline_command('/power/state', 'boot', 'complete]')
                     if rc:
                         print("Error]\r")
-                    else:
-                        print("complete]\r")
-
             else:
                 print("Unknown boot state.]\r")
 
         else:
             print("Unknown power state.]\r")
-
         check_power_state()
     elif localcommand[0] == 'r':
         sys.stdout.write('\x1b7\x1b[999;999H\x1b[6n')
@@ -929,63 +938,7 @@ def main():
                 rdylist = ()
             for fh in rdylist:
                 if fh == session.connection:
-                    # this only should get called in the
-                    # case of a console session
-                    # each command should slurp up all relevant
-                    # recv potential
-                    #fh.read()
-                    try:
-                        data = tlvdata.recv(fh)
-                    except Exception:
-                        data = None
-                    if type(data) == dict:
-                        updatestatus(data)
-                        continue
-                    if data is not None:
-                        data = client.stringify(data)
-                        if clearpowermessage:
-                            sys.stdout.write("\x1b[2J\x1b[;H")
-                            clearpowermessage = False
-                        try:
-                            sys.stdout.write(data)
-                        except IOError:  # Some times circumstances are bad
-                            # resort to byte at a time...
-                            for d in data:
-                                sys.stdout.write(d)
-                        now = time.time()
-                        if ('showtime' not in laststate or
-                                (now // 60) != laststate['showtime'] // 60):
-                            # don't bother churning if minute does not change
-                            laststate['showtime'] = now
-                            updatestatus()
-                        try:
-                            sys.stdout.flush()
-                        except Exception:
-                            # EWOULDBLOCK causes this to raise, ignore
-                            # this scenario comfortable that it
-                            # will come out soon enough
-                            pass
-                    else:
-                        deadline = 5
-                        connected = False
-                        while not connected and deadline > 0:
-                            try:
-                                server_connect()
-                                connected = True
-                            except Exception:
-                                pass
-                            if not connected:
-                                time.sleep(1)
-                                deadline -=1
-                        if connected:
-                            do_command(
-                                "start /nodes/%s/console/session skipreplay=True" % consolename,
-                                netserver)
-                        else:
-                            doexit = True
-                            inconsole = False
-                            sys.stdout.write("\r\n[remote disconnected]\r\n")
-                        break
+                    consume_termdata(fh)
                 else:
                     try:
                         myinput = fh.read()
@@ -1011,6 +964,65 @@ def main():
                     sys.stdout.write('Lost connection to server')
     quitconfetty(fullexit=True)
 
+def consume_termdata(fh, bufferonly=False):
+    global clearpowermessage
+    try:
+        data = tlvdata.recv(fh)
+    except Exception:
+        data = None
+    if type(data) == dict:
+        updatestatus(data)
+        return ''
+    if data is not None:
+        data = client.stringify(data)
+        if clearpowermessage:
+            sys.stdout.write("\x1b[2J\x1b[;H")
+            clearpowermessage = False
+        if bufferonly:
+            return data
+        try:
+            sys.stdout.write(data)
+        except UnicodeEncodeError:
+            sys.stdout.buffer.write(data.encode('utf8'))
+        except IOError:  # Some times circumstances are bad
+                         # resort to byte at a time...
+            for d in data:
+                sys.stdout.write(d)
+        now = time.time()
+        if ('showtime' not in laststate or
+                                (now // 60) != laststate['showtime'] // 60):
+            # don't bother churning if minute does not change
+            laststate['showtime'] = now
+            updatestatus()
+        try:
+            sys.stdout.flush()
+        except Exception:
+            # EWOULDBLOCK causes this to raise, ignore
+            # this scenario comfortable that it
+            # will come out soon enough
+            pass
+    else:
+        deadline = 5
+        connected = False
+        while not connected and deadline > 0:
+            try:
+                server_connect()
+                connected = True
+            except Exception:
+                pass
+            if not connected:
+                time.sleep(1)
+                deadline -=1
+        if connected:
+            do_command(
+                "start /nodes/%s/console/session skipreplay=True" % consolename,
+                netserver)
+        else:
+            doexit = True
+            inconsole = False
+            sys.stdout.write("\r\n[remote disconnected]\r\n")
+    return ''
+
 if __name__ == '__main__':
     errcode = 0
     deadline = 0
@@ -1020,6 +1032,14 @@ if __name__ == '__main__':
         main()
     except BailOut as e:
         errcode = e.errorcode
+    except Exception as e:
+        import traceback
+        excinfo = traceback.print_exc()
+        try:
+            quitconfetty()
+        except Exception:
+            pass
+        print(excinfo)
     finally:
         if deadline and os.times()[4] < deadline:
             sys.stderr.write('[Exited early, hit enter to continue]')

confluent_client/bin/confluent2hosts

@@ -0,0 +1,212 @@
+#!/usr/bin/python2
+import argparse
+import os
+import re
+import signal
+import sys
+try:
+    signal.signal(signal.SIGPIPE, signal.SIG_DFL)
+except AttributeError:
+    pass
+
+path = os.path.dirname(os.path.realpath(__file__))
+path = os.path.realpath(os.path.join(path, '..', 'lib', 'python'))
+if path.startswith('/opt'):
+    sys.path.append(path)
+import confluent.client as client
+import confluent.sortutil as sortutil
+
+def partitionhostsline(line):
+    comment = ''
+    if '#' in line:
+        cmdidx = line.index('#')
+        comment = line[cmdidx:]
+        line = line[:cmdidx].strip()
+    if not line.strip():
+        return '', [], comment
+    ipaddr, names = line.split(None, 1)
+    names = names.split()
+    return ipaddr, names, comment
+
+class HostMerger(object):
+    def __init__(self):
+        self.byip = {}
+        self.byname = {}
+        self.byname6 = {}
+        self.sourcelines = []
+        self.targlines = []
+
+    def read_source(self, sourcefile):
+        with open(sourcefile, 'r') as hfile:
+            self.sourcelines = hfile.read().split('\n')
+        while not self.sourcelines[-1]:
+            self.sourcelines = self.sourcelines[:-1]
+        for x in range(len(self.sourcelines)):
+            line = self.sourcelines[x]
+            currip, names, comment = partitionhostsline(line)
+            if currip:
+                self.byip[currip] = x
+            byname = self.byname
+            if ':' in currip:
+                byname = self.byname6
+            for name in names:
+                byname[name] = x
+
+    def add_entry(self, ip, names):
+        targ = self.byname
+        if ':' in ip:
+            targ = self.byname6
+        line = '{:<39} {}'.format(ip, names)
+        x = len(self.sourcelines)
+        self.sourcelines.append(line)
+        for name in names.split():
+            if not name:
+                continue
+            targ[name] = x
+        self.byip[ip] = x
+
+
+    def read_target(self, targetfile):
+        if not os.path.exists(targetfile):
+            return
+        with open(targetfile, 'r') as hfile:
+            lines = hfile.read().split('\n')
+            while lines and not lines[-1]:
+                lines = lines[:-1]
+            for y in range(len(lines)):
+                line = lines[y]
+                currip, names, comment = partitionhostsline(line)
+                byname = self.byname
+                if ':' in currip:
+                    byname = self.byname6
+                if currip in self.byip:
+                    x = self.byip[currip]
+                    if self.sourcelines[x] is None:
+                        # have already consumed this entry
+                        continue
+                    self.targlines.append(self.sourcelines[x])
+                    self.sourcelines[x] = None
+                    continue
+                for name in names:
+                    if name in byname:
+                        x = byname[name]
+                        if self.sourcelines[x] is None:
+                            break
+                        self.targlines.append(self.sourcelines[x])
+                        self.sourcelines[x] = None
+                        break
+                else:
+                    self.targlines.append(line)
+
+    def write_out(self, targetfile):
+        while self.targlines and not self.targlines[-1]:
+            self.targlines = self.targlines[:-1]
+        while self.sourcelines and not self.sourcelines[-1]:
+            self.sourcelines = self.sourcelines[:-1]
+            if not self.sourcelines:
+                break
+        with open(targetfile, 'w') as hosts:
+            for line in self.targlines:
+                hosts.write(line + '\n')
+            for line in self.sourcelines:
+                if line is not None:
+                    hosts.write(line + '\n')
+
+def main():
+    ap = argparse.ArgumentParser(description="Create/amend /etc/hosts file for given noderange")
+    ap.add_argument('noderange', help='Noderange to generate/update /etc/hosts for')
+    ap.add_argument('-a', '--attrib', help='Pull ip addresses and hostnames from attribute database', action='store_true')
+    ap.add_argument('-i', '--ip', help='Expression to generate addresses (e.g. 172.16.1.{n1} or fd2b:246f:8a50::{n1:x})')
+    ap.add_argument('-n', '--name', help='Expression for name to add ({node}-compute, etc). If unspecified, "{node} {node}.{dns.domain}" will be used', action='append')
+    args = ap.parse_args()
+    c = client.Command()
+    if args.name:
+        names = ' '.join(args.name)
+    else:
+        names = '{node} {node}.{dns.domain}'
+    merger = HostMerger()
+    if not args.ip and not args.attrib:
+        sys.stderr.write('-a or -i is currently required\n')
+        sys.exit(1)
+    if args.attrib:
+        ip4bynode = {}
+        ip6bynode = {}
+        namesbynode = {}
+        domainsbynode = {}
+        for ent in c.read('/noderange/{0}/attributes/current'.format(args.noderange)):
+            ent = ent.get('databynode', {})
+            for node in ent:
+                for attrib in ent[node]:
+                    val = ent[node][attrib]
+                    if not isinstance(val, dict):
+                        continue
+                    val = val.get('value', None)
+                    if attrib == 'dns.domain':
+                        domainsbynode[node] = val
+                    if attrib.startswith('net.'):
+                        nameparts = attrib.split('.')
+                        if len(nameparts) == 2:
+                            currnet = None
+                        else:
+                            currnet = '.'.join(nameparts[1:-1])
+                        for currdict in (ip4bynode, ip6bynode, namesbynode):
+                            if node not in currdict:
+                                currdict[node] = {}
+                        if attrib.endswith('.ipv4_address') and val:
+                            ip4bynode[node][currnet] = val.split('/', 1)[0]
+                        elif attrib.endswith('.ipv6_address') and val:
+                            ip6bynode[node][currnet] = val.split('/', 1)[0]
+                        elif attrib.endswith('.hostname'):
+                            namesbynode[node][currnet] = re.split('\s+|,', val)
+        for node in ip4bynode:
+            mydomain = domainsbynode.get(node, None)
+            for ipdb in (ip4bynode, ip6bynode):
+                for currnet in ipdb[node]:
+                    if args.name:
+                        sys.stderr.write('Custom name and attribute addresses not currently supported together\n')
+                        sys.exit(1)
+                    else:
+                        names = list(namesbynode.get(node, {}).get(currnet, [node]))
+                        if mydomain:
+                            for name in names:
+                                if mydomain in names:
+                                    break
+                            else:
+                                for name in list(names):
+                                    names.append('{0}.{1}'.format(name, mydomain))
+                    names = ' '.join(names)
+                    merger.add_entry(ipdb[node][currnet], names)
+        merger.write_out('/etc/whatnowhosts')
+    else:
+        namesbynode = {}
+        ipbynode = {}
+        expurl = '/noderange/{0}/attributes/expression'.format(args.noderange)
+        expression = names
+        exitcode = 0
+        exitcode |= expand_expression(c, namesbynode, expurl, names)
+        exitcode |= expand_expression(c, ipbynode, expurl, args.ip)
+        if exitcode:
+            sys.exit(exitcode)
+        for node in ipbynode:
+            merger.add_entry(ipbynode[node], namesbynode[node])
+    if os.path.exists('/etc/hosts'):
+        merger.read_target('/etc/hosts')
+        os.rename('/etc/hosts', '/etc/hosts.confluentbkup')
+    merger.write_out('/etc/hosts')
+
+
+
+def expand_expression(c, namesbynode, expurl, expression):
+    exitcode = 0
+    for exp in c.create(expurl, {'expression': expression}):
+        if 'error' in exp:
+            sys.stderr.write(exp['error'] + '\n')
+            exitcode |= exp.get('errorcode', 1)
+        ex = exp.get('databynode', ())
+        for node in ex:
+            namesbynode[node] = ex[node]['value']
+    return exitcode
+
+
+if __name__ == '__main__':
+    main()

confluent_client/bin/dir2img

@@ -8,7 +8,7 @@ import os
 import subprocess
 import sys
 
-def create_image(directory, image):
+def create_image(directory, image, label=None):
     ents = 0
     datasz = 512
     for dir in os.walk(sys.argv[1]):
@@ -25,8 +25,13 @@ def create_image(directory, image):
     with open(image, 'wb') as imgfile:
         imgfile.seek(datasz * 512 - 1)
         imgfile.write(b'\x00')
-    subprocess.check_call(['mformat', '-i', image, '-r', '16', '-d', '1', '-t',
-                            str(datasz), '-s', '1','-h', '1', '::'])
+    if label:
+        subprocess.check_call(['mformat', '-i', image, '-v', label,
+                               '-r', '16', '-d', '1', '-t', str(datasz),
+                               '-s', '1','-h', '1', '::'])
+    else:
+        subprocess.check_call(['mformat', '-i', image, '-r', '16', '-d', '1', '-t',
+                                str(datasz), '-s', '1','-h', '1', '::'])
     # Some clustered filesystems will have the lock from mformat
     # linger after close (mformat doesn't unlock)
     # do a blocking wait for shared lock and then explicitly
@@ -50,4 +55,7 @@ if __name__ == '__main__':
         sys.stderr.write("Usage: {0} <directory> <imagefile>".format(
             sys.argv[0]))
         sys.exit(1)
-    create_image(sys.argv[1], sys.argv[2])
+    label = None
+    if len(sys.argv) > 3:
+        label = sys.argv[3]
+    create_image(sys.argv[1], sys.argv[2], label)

confluent_client/bin/nodeattrib

@@ -105,7 +105,10 @@ if len(args) > 1:
             requestargs=args[1:]
     except:
         pass
-
+elif options.clear or options.environment or options.prompt:
+    sys.stderr.write('Attribute names required with specified options\n')
+    argparser.print_help()
+    exitcode = 400
 if exitcode != 0:
     sys.exit(exitcode)
 

confluent_client/bin/nodebmcreset

@@ -47,14 +47,14 @@ exitcode = 0
 errorNodes = set([])
 session.stop_if_noderange_over(noderange, options.maxnodes)
 success = session.simple_noderange_command(noderange, 'configuration/management_controller/reset', 'reset', key='state', errnodes=errorNodes)   # = 0 if successful
-if success != 0:
-    sys.exit(success)
 
 # Determine which nodes were successful and print them
 
 allNodes = set([])
 
 for node in session.read('/noderange/{0}/nodes/'.format(noderange)):
+    if 'error' in node and success != 0:
+        sys.exit(success)
     allNodes.add(node['item']['href'].replace("/", ""))
 
 goodNodes = allNodes - errorNodes

confluent_client/bin/nodeconfig

@@ -43,7 +43,7 @@ def bailout(msg, code=1):
     sys.exit(code)
 
 
-argparser = optparse.OptionParser(usage="Usage: %prog [options] noderange [option|option=value]")
+argparser = optparse.OptionParser(usage="Usage: %prog [options] <noderange> [setting|setting=value]")
 argparser.add_option('-c', '--comparedefault', dest='comparedefault',
                      action='store_true', default=False,
                      help='Compare given settings to default or list settings '
@@ -134,9 +134,10 @@ def _assign_value():
     assignment[key] = value
 
 
-def parse_config_line(arguments):
+def parse_config_line(arguments, single=False):
     global setmode, printallbmc, forceset, key, value, needval, candidate, path, attrib
-    for param in arguments:
+    for pidx in range(0, len(arguments)):
+        param = arguments[pidx]
         if param == 'show':
             continue  # forgive muscle memory of pasu users
         if param == 'set':
@@ -146,14 +147,19 @@ def parse_config_line(arguments):
         if needval:
             key = needval
             needval = None
-            value = param
+            if single:
+                value = ' '.join(arguments[pidx:])
+                _assign_value()
+                break
+            else:
+                value = param
             _assign_value()
             continue
         if '=' in param or param[-1] == ':' or forceset:
             if setmode is None:
                 setmode = True
             if setmode != True:
-                bailout('Cannot do set and query in same command')
+                bailout('Cannot do set and query in same command: Query detected but "{0}" appears to be set'.format(param))
             if '=' in param:
                 key, _, value = param.partition('=')
                 _assign_value()
@@ -165,7 +171,7 @@ def parse_config_line(arguments):
             if setmode is None:
                 setmode = False
             if setmode != False:
-                bailout('Cannot do set and query in same command')
+                bailout('Cannot do set and query in same command: Set mode detected but "{0}" appears to be a query'.format(param))
             if '.' not in param:
                 if param == 'bmc':
                     printallbmc = True
@@ -215,7 +221,7 @@ if options.batch:
             pass
         argset = argset.strip()
         if argset:
-            parse_config_line(shlex.split(argset))
+            parse_config_line(shlex.split(argset), single=True)
         argset = argfile.readline()
 else:
     parse_config_line(args[1:])
@@ -272,7 +278,6 @@ if setmode:
             rcode |= client.printerror(fr)
             for node in fr.get('databynode', []):
                 r = fr['databynode'][node]
-                rcode |= client.printerror(r, node)
                 if 'value' not in r:
                     continue
                 keyval = r['value']

confluent_client/bin/nodedeploy

@@ -79,7 +79,7 @@ def main(args):
         sys.stderr.write('-n is a required argument currently to perform an install, optionally with -p\n')
         return 1
     if not args.profile and args.network:
-        sys.stderr.write('profile is a required argument to request a network deployment\n')
+        sys.stderr.write('Both noderange and a profile name are required arguments to request a network deployment\n')
         return 1
     if extra:
         sys.stderr.write('Unrecognized arguments: ' + repr(extra) + '\n')
@@ -89,6 +89,23 @@ def main(args):
         cleararm(args.noderange, c)
         clearpending(args.noderange, c)
     elif args.profile:
+        profnames = []
+        for prof in c.read('/deployment/profiles/'):
+            profname = prof.get('item', {}).get('href', None)
+            if profname:
+                profname = profname.replace('/', '')
+                profnames.append(profname)
+                if profname == args.profile:
+                    break
+        else:
+            sys.stderr.write('The specified profile "{}" is not an available profile\n'.format(args.profile))
+            if profnames:
+                sys.stderr.write('The following profiles are available:\n')
+                for profname in profnames:
+                    sys.stderr.write('    ' + profname + '\n')
+            else:
+                sys.stderr.write('No deployment profiles available, try osdeploy fiimport or imgutil capture\n')
+            sys.exit(1)
         armonce(args.noderange, c)
         setpending(args.noderange, args.profile, c)
     else:

confluent_client/bin/nodediscover

@@ -34,6 +34,7 @@ defcolumns = ['Node', 'Model', 'Serial', 'UUID', 'Mac Address', 'Type',
 columnmapping = {
     'Node': 'nodename',
     'Model': 'modelnumber',
+    'Model Name': 'modelname',
     'Serial': 'serialnumber',
     'UUID': 'uuid',
     'Type': 'types',
@@ -148,6 +149,7 @@ unique_fields = frozenset(['serial', 'mac', 'uuid'])
 def import_csv(options, session):
     nodedata = []
     unique_data = {}
+    exitcode = 0
     with open(options.importfile, 'r') as datasrc:
         records = csv.reader(datasrc)
         fields = process_header(next(records))
@@ -188,6 +190,7 @@ def import_csv(options, session):
         for res in session.create('/nodes/', datum):
             if 'error' in res:
                 sys.stderr.write(res['error'] + '\n')
+                exitcode |= res.get('errorcode', 1)
                 continue
             elif 'created' in res:
                 print('Defined ' + res['created'])
@@ -198,11 +201,14 @@ def import_csv(options, session):
                                       {'node': nodename}):
                 if 'error' in res:
                     sys.stderr.write(res['error'] + '\n')
+                    exitcode |= res.get('errorcode', 1)
                     continue
                 elif 'assigned' in res:
                     print('Discovered ' + res['assigned'])
                 else:
                     print(repr(res))
+    if exitcode:
+        sys.exit(exitcode)
 
 
 def list_discovery(options, session):
@@ -263,7 +269,11 @@ def list_matching_macs(options, session, node=None, checknode=True):
         return [options.mac.replace(':', '-')]
     else:
         path += 'by-mac/'
-        return [x['item']['href'] for x in session.read(path)]
+        ret = []
+        for x in session.read(path):
+            if 'item' in x and 'href' in x['item']:
+                ret.append(x['item']['href'])
+        return ret
 
 def assign_discovery(options, session, needid=True):
     abort = False
@@ -287,12 +297,18 @@ def assign_discovery(options, session, needid=True):
     if not matches:
         sys.stderr.write("No matching discovery candidates found\n")
         sys.exit(1)
+    exitcode = 0
     for res in session.update('/discovery/by-mac/{0}'.format(matches[0]),
                    {'node': options.node}):
         if 'assigned' in res:
             print('Assigned: {0}'.format(res['assigned']))
+        elif 'error' in res:
+            sys.stderr.write('Error: {0}\n'.format(res['error']))
+            exitcode |= res.get('errorcode', 1)
         else:
             print(repr(res))
+    if exitcode:
+        sys.exit(exitcode)
 
 def blocking_scan(session):
     list(session.update('/discovery/rescan', {'rescan': 'start'}))

confluent_client/bin/nodeeventlog

@@ -37,7 +37,7 @@ if sys.version_info[0] < 3:
     sys.stdout = codecs.getwriter('utf8')(sys.stdout)
 
 argparser = optparse.OptionParser(
-    usage="Usage: %prog [options] noderange [clear]")
+    usage="Usage: %prog [options] <noderange> [clear]")
 argparser.add_option('-m', '--maxnodes', type='int',
                      help='Specify a maximum number of '
                           'nodes to clear if clearing log, '

confluent_client/bin/nodefirmware

@@ -88,9 +88,9 @@ client.check_globbing(noderange)
 
 def get_update_progress(session, url):
     for res in session.read(url):
-        status = res['phase']
-        percent = res['progress']
-        detail = res['detail']
+        status = res.get('phase', 'error')
+        percent = res.get('progress', None)
+        detail = res.get('detail', repr(res)),
         if status == 'error':
             text = 'error!'
         else:
@@ -109,6 +109,12 @@ def update_firmware(session, filename):
     if options.backup:
         upargs['bank'] = 'backup'
     noderrs = {}
+    if session.unixdomain:
+        of = open(filename, 'rb')
+        try:
+            session.add_file(filename, of.fileno(), 'rb')
+        except Exception:
+            pass
     for res in session.create(resource, upargs):
         if 'created' not in res:
             for nodename in res.get('databynode', ()):
@@ -141,22 +147,25 @@ def update_firmware(session, filename):
 def show_firmware(session):
     global exitcode
     firmware_shown = False
+    nodes_matched = False
     for component in components:
         for res in session.read(
                 '/noderange/{0}/inventory/firmware/all/{1}'.format(
                     noderange, component)):
+            nodes_matched = True
             exitcode |= client.printerror(res)
             if 'databynode' not in res:
                 continue
             for node in res['databynode']:
-                exitcode |= client.printerror(res['databynode'][node], node)
                 if 'firmware' not in res['databynode'][node]:
                     continue
                 for inv in res['databynode'][node]['firmware']:
                     for prefix in inv:
                         firmware_shown = True
                         printfirm(node, prefix, inv[prefix])
-    if not firmware_shown and not exitcode:
+    if not nodes_matched:
+        sys.stderr.write('No matching nodes for noderange "{0}"\n'.format(noderange))
+    elif not firmware_shown and not exitcode:
         argparser.print_help()
 
 

confluent_client/bin/nodegroupdefine

@@ -45,14 +45,15 @@ except IndexError:
 client.check_globbing(noderange)
 session = client.Command()
 exitcode = 0
-attribs = {'name': noderange}
-for arg in args[1:]:
-    key, val = arg.split('=', 1)
-    attribs[key] = val
-for r in session.create('/nodegroups/', attribs):
-    if 'error' in r:
-        sys.stderr.write(r['error'] + '\n')
-        exitcode |= 1
-    if 'created' in r:
-        print('{0}: created'.format(r['created']))
+for group in noderange.split(','):
+    attribs = {'name': group}
+    for arg in args[1:]:
+        key, val = arg.split('=', 1)
+        attribs[key] = val
+    for r in session.create('/nodegroups/', attribs):
+        if 'error' in r:
+            sys.stderr.write(r['error'] + '\n')
+            exitcode |= 1
+        if 'created' in r:
+            print('{0}: created'.format(r['created']))
 sys.exit(exitcode)

confluent_client/bin/nodegroupremove

@@ -43,10 +43,11 @@ noderange = args[0]
 client.check_globbing(noderange)
 session = client.Command()
 exitcode = 0
-for r in session.delete('/nodegroups/{0}'.format(noderange)):
-    if 'error' in r:
-        sys.stderr.write(r['error'] + '\n')
-        exitcode |= 1
-    if 'deleted' in r:
-        print('{0}: deleted'.format(r['deleted']))
+for group in noderange.split(','):
+    for r in session.delete('/nodegroups/{0}'.format(group)):
+        if 'error' in r:
+            sys.stderr.write(r['error'] + '\n')
+            exitcode |= 1
+        if 'deleted' in r:
+            print('{0}: deleted'.format(r['deleted']))
 sys.exit(exitcode)

confluent_client/bin/nodeinventory

@@ -53,6 +53,9 @@ def print_mem_info(node, prefix, meminfo):
         memdescfmt += '3-{1} '
     elif 'DDR4' in meminfo['memory_type']:
         memdescfmt += '4-{1} '
+    elif 'DCPMM' in meminfo['memory_type']:
+        memdescfmt = '{0}GB {1} '
+        meminfo['module_type'] = 'DCPMM'
     else:
         print('{0}: {1}: Unrecognized Memory'.format(node, prefix))
         return

confluent_client/bin/nodelicense

@@ -36,7 +36,7 @@ exitcode = 0
 
 argparser = optparse.OptionParser(
     usage="Usage: "
-          "%prog <noderange> [list][install <file>|save <directory>|delete <name>]")
+          "%prog <noderange> [list][install <license_filename>|save <directory>|delete <license_feature_name>]")
 argparser.add_option('-m', '--maxnodes', type='int',
                      help='Specify a maximum number of '
                           'nodes to delete licenses from, '
@@ -69,6 +69,12 @@ def install_license(session, filename):
                'management_controller/licenses/'.format(noderange)
     filename = os.path.abspath(filename)
     instargs = {'filename': filename}
+    if session.unixdomain:
+        of = open(filename, 'rb')
+        try:
+            session.add_file(filename, of.fileno(), 'rb')
+        except Exception:
+            pass
     for res in session.create(resource, instargs):
         for node in res.get('databynode', []):
             if 'error' in res['databynode'][node]:

confluent_client/bin/nodemedia

@@ -111,6 +111,12 @@ def upload_media(noderange, media):
     resource = '/noderange/{0}/media/uploads/'.format(noderange)
     upargs = {'filename': filename}
     noderrs = {}
+    if session.unixdomain:
+        of = open(filename, 'rb')
+        try:
+            session.add_file(filename, of.fileno(), 'rb')
+        except Exception:
+            pass
     nodeurls = {}
     for res in session.create(resource, upargs):
         if 'created' not in res:
@@ -187,5 +193,7 @@ def main():
         argparser.print_help()
         sys.exit(1)
     handler(noderange, media)
+
 if __name__ == '__main__':
     main()
+    sys.exit(exitcode)

confluent_client/bin/nodepower

@@ -32,7 +32,7 @@ if path.startswith('/opt'):
 import confluent.client as client
 
 argparser = optparse.OptionParser(
-    usage="Usage: %prog [options] noderange "
+    usage="Usage: %prog [options] <noderange> "
           "([status|on|off|shutdown|boot|reset])")
 argparser.add_option('-p', '--showprevious', dest='previous',
                      action='store_true', default=False,
@@ -77,4 +77,4 @@ if options.previous:
     # add dictionary to session
     session.add_precede_dict(prev)
 
-sys.exit(session.simple_noderange_command(noderange, '/power/state', setstate, promptover=options.maxnodes))
+sys.exit(session.simple_noderange_command(noderange, '/power/state', setstate, promptover=options.maxnodes))

confluent_client/bin/noderemove

@@ -33,7 +33,7 @@ if path.startswith('/opt'):
 import confluent.client as client
 
 argparser = optparse.OptionParser(
-    usage='''\n       %prog noderange
+    usage='''\n       %prog <noderange>
              \n ''')
 argparser.add_option('-m', '--maxnodes', type='int',
                      help='Specify a maximum number of '

confluent_client/bin/nodersync

@@ -40,7 +40,7 @@ import confluent.sortutil as sortutil
 
 def run():
     argparser = optparse.OptionParser(
-        usage="Usage: %prog location noderange:location",
+        usage="Usage: %prog <file/directorylist> <noderange>:<destination>",
     )
     argparser.add_option('-m', '--maxnodes', type='int',
                      help='Specify a maximum number of '

confluent_client/bin/noderun

@@ -39,7 +39,7 @@ import confluent.sortutil as sortutil
 
 def run():
     argparser = optparse.OptionParser(
-        usage="Usage: %prog [options] noderange commandexpression",
+        usage="Usage: %prog [options] <noderange> <command expression>",
         epilog="Expressions are the same as in attributes, e.g. "
                "'ipmitool -H {hardwaremanagement.manager}' will be expanded.")
     argparser.add_option('-f', '-c', '--count', type='int', default=168,
@@ -131,8 +131,14 @@ def run():
 
 
 def run_cmdv(node, cmdv, all, pipedesc):
-    nopen = subprocess.Popen(
-        cmdv, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
+    try:
+        nopen = subprocess.Popen(
+            cmdv, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
+    except OSError as e:
+        if e.errno == 2:
+            sys.stderr.write('{0}: Unable to find local executable file "{1}"'.format(node, cmdv[0]))
+            return
+        raise
     pipedesc[nopen.stdout] = {'node': node, 'popen': nopen,
                               'type': 'stdout'}
     pipedesc[nopen.stderr] = {'node': node, 'popen': nopen,

confluent_client/bin/nodesensors

@@ -32,6 +32,13 @@ path = os.path.realpath(os.path.join(path, '..', 'lib', 'python'))
 if path.startswith('/opt'):
     sys.path.append(path)
 
+
+class hybridcsv(csv.excel):
+    lineterminator = '\n'
+
+
+csv.register_dialect('hybrid', hybridcsv)
+
 import confluent.client as client
 
 sensorcollections = {
@@ -209,7 +216,7 @@ def main():
             headernames.append(headername)
     if options.csv:
         linebyline = False
-        csvwriter = csv.writer(sys.stdout)
+        csvwriter = csv.writer(sys.stdout, dialect='hybrid')
         if options.interval:
             csvwriter.writerow(['time', 'node'] + headernames)
         else:

confluent_client/bin/nodesetboot

@@ -32,7 +32,7 @@ if path.startswith('/opt'):
 import confluent.client as client
 
 argparser = optparse.OptionParser(
-    usage='Usage: %prog [options] noderange [default|cd|network|setup|hd|floppy]')
+    usage='Usage: %prog [options] <noderange> [default|cd|network|setup|hd|usb|floppy]')
 argparser.add_option('-b', '--bios', dest='biosmode',
                      action='store_true', default=False,
                      help='Request BIOS style boot (rather than UEFI)')

confluent_client/bin/nodeshell

@@ -44,10 +44,14 @@ def run():
                "'ipmitool -H {hardwaremanagement.manager}' will be expanded.")
     argparser.add_option('-f', '-c', '--count', type='int', default=168,
                          help='Number of commands to run at a time')
+    argparser.add_option('-l', '--loginname', type='str',
+                         help='Username to use when connecting, defaults to current user.')
     argparser.add_option('-n', '--nonodeprefix', action='store_true',
                          help='Do not prefix output with node names')
     argparser.add_option('-p', '--port', type='int', default=0,
                          help='Specify a custom port for ssh')
+    argparser.add_option('-s', '--substitutename',
+                         help='Use a different name other than the nodename for ssh')
     argparser.add_option('-m', '--maxnodes', type='int',
                      help='Specify a maximum number of '
                           'nodes to run remote ssh command to, '
@@ -71,6 +75,19 @@ def run():
     exitcode = 0
 
     c.stop_if_noderange_over(args[0], options.maxnodes)
+    nodemap = {}
+    if options.substitutename:
+        subname = options.substitutename
+        if '{' not in subname:
+            subname = '{node}' + subname
+        for exp in c.create('/noderange/{0}/attributes/expression'.format(args[0]),
+                        {'expression': subname}):
+            if 'error' in exp:
+                sys.stderr.write(exp['error'] + '\n')
+                exitcode |= exp.get('errorcode', 1)
+            ex = exp.get('databynode', ())
+            for node in ex:
+                nodemap[node] = ex[node]['value']
     for exp in c.create('/noderange/{0}/attributes/expression'.format(args[0]),
                         {'expression': cmdstr}):
         if 'error' in exp:
@@ -79,12 +96,15 @@ def run():
         ex = exp.get('databynode', ())
         for node in ex:
             cmd = ex[node]['value']
+            sshnode = nodemap.get(node, node)
             if not isinstance(cmd, str) and not isinstance(cmd, bytes):
                 cmd = cmd.encode('utf-8')
+            cmdv = ['ssh']
             if options.port:
-                cmdv = ['ssh', '-p', '{0}'.format(options.port), node, cmd]
-            else:
-                cmdv = ['ssh', node, cmd]
+                cmdv += ['-p', '{0}'.format(options.port)]
+            if options.loginname:
+                cmdv += ['-l', options.loginname]
+            cmdv += [sshnode, cmd]
             if currprocs < concurrentprocs:
                 currprocs += 1
                 run_cmdv(node, cmdv, all, pipedesc)

confluent_client/bin/nodestorage

@@ -20,6 +20,10 @@ import os
 import signal
 import sys
 
+try:
+    input = raw_input
+except NameError:
+    pass
 try:
     signal.signal(signal.SIGPIPE, signal.SIG_DFL)
 except AttributeError:
@@ -186,7 +190,7 @@ funmap = {
 
 def main():
     argparser = OptParser(
-        usage='Usage: %prog <noderange> [show|create|delete|diskset]',
+        usage='Usage: %prog <noderange> [show|create|delete|diskset] [hotspare|jbod|unconfigured] [options]',
         epilog='',
     )
     argparser.add_option('-r', '--raidlevel', type='int',
@@ -195,6 +199,8 @@ def main():
                          help='Comma separated list of disks to use, or the '
                               'word "rest" to indicate use of all available '
                               'disks')
+    argparser.add_option('-i', '--interactive', default=False, action='store_true',
+                         help='Confirm any potentially destructive changes interactively')
     argparser.add_option('-s', '--size', type='str',
                          help='Comma separated list of sizes to use when '
                               'creating volumes.  The sizes may be absolute '
@@ -230,6 +236,13 @@ def main():
     except KeyError:
         argparser.print_help()
         sys.exit(1)
+    if options.interactive and operation != 'show':
+        showstorage(noderange, None, None)
+        sys.stdout.write('The above configuration will be changed by this action, do you wish to continue (y/N): ')
+        confirm = input()
+        if confirm and confirm.lower()[0] != 'y':
+            sys.stdout.write('Aborting\n')
+            sys.exit(1)
     handler(noderange, options, args[2:])
 
 

confluent_client/bin/nodesupport

@@ -116,7 +116,7 @@ class OptParser(optparse.OptionParser):
 def main():
     argparser = OptParser(
         usage="Usage: %prog <noderange> servicedata "
-              "<filename>",
+              "<directory or filename>",
         epilog='\nservicedata will save service data to the given '
                'directory.  It is saved to the location on the relevant '
                'management server (the confluent server if running remote, '

confluent_client/bin/stats

@@ -22,17 +22,23 @@ import io
 import numpy as np
 
 import os
-import sixel
 import subprocess
 import sys
 
-class DumbWriter(sixel.SixelWriter):
-    def restore_position(self, output):
-        return
+try:
+    import sixel
+
+    class DumbWriter(sixel.SixelWriter):
+        def restore_position(self, output):
+            return
+except ImportError:
+    pass
 
 
 def plot(gui, output, plotdata, bins):
     import matplotlib as mpl
+    if gui and mpl.get_backend() == 'agg':
+        sys.stderr.write('Error: No GUI backend available and -g specified!\n')
     if not gui:
         mpl.use('Agg')
     import matplotlib.pyplot as plt

confluent_client/confluent/client.py

@@ -42,9 +42,16 @@ _attraliases = {
 }
 
 try:
-    input = raw_input
+    getinput = raw_input
 except NameError:
-    pass
+    getinput = input
+
+
+class NestedDict(dict):
+    def __missing__(self, key):
+        value = self[key] = type(self)()
+        return value
+
 
 def stringify(instr):
     # Normalize unicode and bytes to 'str', correcting for
@@ -111,6 +118,12 @@ def printerror(res, node=None):
     exitcode = 0
     if 'errorcode' in res:
         exitcode = res['errorcode']
+    for node in res.get('databynode', {}):
+        exitcode = res['databynode'][node].get('errorcode', exitcode)
+        if 'error' in res['databynode'][node]:
+            sys.stderr.write('{0}: {1}\n'.format(node, res['databynode'][node]['error']))
+            if exitcode == 0:
+                exitcode = 1
     if 'error' in res:
         if node:
             sys.stderr.write('{0}: {1}\n'.format(node, res['error']))
@@ -148,6 +161,7 @@ class Command(object):
         self._prevkeyname = None
         self.connection = None
         self._currnoderange = None
+        self.unixdomain = False
         if server is None:
             if 'CONFLUENT_HOST' in os.environ:
                 self.serverloc = os.environ['CONFLUENT_HOST']
@@ -157,11 +171,13 @@ class Command(object):
             self.serverloc = server
         if os.path.isabs(self.serverloc) and os.path.exists(self.serverloc):
             self._connect_unix()
+            self.unixdomain = True
         elif self.serverloc == '/var/run/confluent/api.sock':
             raise Exception('Confluent service is not available')
         else:
             self._connect_tls()
-        tlvdata.recv(self.connection)
+        self.protversion = int(tlvdata.recv(self.connection).split(
+            b'--')[1].strip()[1:])
         authdata = tlvdata.recv(self.connection)
         if authdata['authpassed'] == 1:
             self.authenticated = True
@@ -172,6 +188,13 @@ class Command(object):
             passphrase = os.environ['CONFLUENT_PASSPHRASE']
             self.authenticate(username, passphrase)
 
+    def add_file(self, name, handle, mode):
+        if self.protversion < 3:
+            raise Exception('Not supported with connected confluent server')
+        if not self.unixdomain:
+            raise Exception('Can only add a file to a unix domain connection')
+        tlvdata.send(self.connection, {'filename': name, 'mode': mode}, handle)
+
     def authenticate(self, username, password):
         tlvdata.send(self.connection,
                      {'username': username, 'password': password})
@@ -261,9 +284,9 @@ class Command(object):
                 nodename = list(self.read(
                     '/noderange/{0}/nodes/'.format(noderange)))[0].get('item', {}).get('href', None)
                 nodename = nodename[:-1]
-                p = input('Command is about to affect node {0}, continue (y/n)? '.format(nodename))
+                p = getinput('Command is about to affect node {0}, continue (y/n)? '.format(nodename))
             else:
-                p = input('Command is about to affect {0} nodes, continue (y/n)? '.format(nsize))
+                p = getinput('Command is about to affect {0} nodes, continue (y/n)? '.format(nsize))
             if p.lower() != 'y':
                 sys.stderr.write('Aborting at user request\n')
                 sys.exit(1)
@@ -378,7 +401,7 @@ class Command(object):
                 if fingerprint == khf[hostid]:
                     return
                 else:
-                    replace = input(
+                    replace = getinput(
                         "MISMATCHED CERTIFICATE DATA, ACCEPT NEW? (y/n):")
                     if replace not in ('y', 'Y'):
                         raise Exception("BAD CERTIFICATE")
@@ -411,7 +434,7 @@ def send_request(operation, path, server, parameters=None):
         result = tlvdata.recv(server)
 
 
-def attrrequested(attr, attrlist, seenattributes):
+def attrrequested(attr, attrlist, seenattributes, node=None):
     for candidate in attrlist:
         truename = candidate
         if candidate.startswith('hm'):
@@ -419,10 +442,16 @@ def attrrequested(attr, attrlist, seenattributes):
         if candidate in _attraliases:
             candidate = _attraliases[candidate]
         if fnmatch.fnmatch(attr.lower(), candidate.lower()):
-            seenattributes.add(truename)
+            if node is None:
+                seenattributes.add(truename)
+            else:
+                seenattributes[node][truename] = True
             return True
         elif attr.lower().startswith(candidate.lower() + '.'):
-            seenattributes.add(truename)
+            if node is None:
+                seenattributes.add(truename)
+            else:
+                seenattributes[node][truename] = 1
             return True
     return False
 
@@ -438,13 +467,15 @@ def _sort_attrib(k):
 
 def print_attrib_path(path, session, requestargs, options, rename=None, attrprefix=None):
     exitcode = 0
-    seenattributes = set([])
+    seenattributes = NestedDict()
+    allnodes = set([])
     for res in session.read(path):
         if 'error' in res:
             sys.stderr.write(res['error'] + '\n')
             exitcode = 1
             continue
         for node in sorted(res['databynode']):
+            allnodes.add(node)
             for attr, val in sorted(res['databynode'][node].items(), key=_sort_attrib):
                 if attr == 'error':
                     sys.stderr.write('{0}: Error: {1}\n'.format(node, val))
@@ -452,7 +483,7 @@ def print_attrib_path(path, session, requestargs, options, rename=None, attrpref
                 if attr == 'errorcode':
                     exitcode |= val
                     continue
-                seenattributes.add(attr)
+                seenattributes[node][attr] = True
                 if rename:
                     printattr = rename.get(attr, attr)
                 else:
@@ -460,7 +491,7 @@ def print_attrib_path(path, session, requestargs, options, rename=None, attrpref
                 if attrprefix:
                     printattr = attrprefix + printattr
                 currattr = res['databynode'][node][attr]
-                if show_attr(attr, requestargs, seenattributes, options):
+                if show_attr(attr, requestargs, seenattributes, options, node):
                     if 'value' in currattr:
                         if currattr['value'] is not None:
                             val = currattr['value']
@@ -476,7 +507,7 @@ def print_attrib_path(path, session, requestargs, options, rename=None, attrpref
                                                                   printattr)
                         else:
                             attrout = '{0}: {1}:'.format(node, printattr)
-                    elif 'broken' in currattr:
+                    elif isinstance(currattr, dict) and 'broken' in currattr:
                         attrout = '{0}: {1}: *ERROR* BROKEN EXPRESSION: ' \
                                   '{2}'.format(node, printattr,
                                                currattr['broken'])
@@ -493,7 +524,7 @@ def print_attrib_path(path, session, requestargs, options, rename=None, attrpref
                         blame = options.blame
                     except AttributeError:
                         blame = False
-                    if blame or 'broken' in currattr:
+                    if blame or (isinstance(currattr, dict) and 'broken' in currattr):
                         blamedata = []
                         if 'inheritedfrom' in currattr:
                             blamedata.append('inherited from group {0}'.format(
@@ -541,23 +572,39 @@ def print_attrib_path(path, session, requestargs, options, rename=None, attrpref
                                 except TypeError:
                                     pass
                         cprint(attrout)
+    somematched = set([])
+    printmissing = set([])
+    badnodes = NestedDict()
     if not exitcode:
         if requestargs:
             for attr in requestargs:
-                if attr not in seenattributes:
-                    sys.stderr.write('Error: {0} not a valid attribute\n'.format(attr))
-                    exitcode = 1
+                for node in allnodes:
+                    if attr in seenattributes[node]:
+                        somematched.add(attr)
+                    else:
+                        badnodes[node][attr] = True
+                        exitcode = 1
+        for node in sortutil.natural_sort(badnodes):
+            for attr in badnodes[node]:
+                if attr in somematched:
+                    sys.stderr.write(
+                        'Error: {0} matches no valid value for {1}\n'.format(
+                            attr, node))
+                else:
+                    printmissing.add(attr)
+        for missing in printmissing:
+            sys.stderr.write('Error: {0} not a valid attribute\n'.format(attr))
     return exitcode
 
 
-def show_attr(attr, requestargs, seenattributes, options):
+def show_attr(attr, requestargs, seenattributes, options, node):
     try:
         reverse = options.exclude
     except AttributeError:
         reverse = False
     if requestargs is None or requestargs == []:
         return True
-    processattr = attrrequested(attr, requestargs, seenattributes)
+    processattr = attrrequested(attr, requestargs, seenattributes, node)
     if reverse:
         processattr = not processattr
     return processattr
@@ -586,7 +633,7 @@ def printgroupattributes(session, requestargs, showtype, nodetype, noderange, op
                         attrout = '{0}: {1}: ********'.format(noderange, attr)
                     else:
                         attrout = '{0}: {1}:'.format(noderange, attr)
-                elif 'broken' in currattr:
+                elif isinstance(currattr, dict) and 'broken' in currattr:
                     attrout = '{0}: {1}: *ERROR* BROKEN EXPRESSION: ' \
                               '{2}'.format(noderange, attr,
                                            currattr['broken'])

confluent_client/confluent/screensqueeze.py

@@ -17,9 +17,9 @@ import sys
 import struct
 import termios
 
-def get_screenwidth():
+def get_screengeom():
     return struct.unpack('hh', fcntl.ioctl(sys.stdout, termios.TIOCGWINSZ,
-                                           b'....'))[1]
+                                           b'....'))
 class ScreenPrinter(object):
 
     def __init__(self, noderange, client, textlen=4):
@@ -44,7 +44,7 @@ class ScreenPrinter(object):
         self.fieldwidth = maxlen + textlen + 1  # 1 for column
 
     def set_output(self, node, text):
-        if self.nodeoutput[node] == text:
+        if self.nodeoutput.get(node, None) == text:
             return
         self.nodeoutput[node] = text
         if len(text) >= self.textlen:
@@ -54,23 +54,31 @@ class ScreenPrinter(object):
 
     def drawscreen(self):
         if self.squeeze:
-            currwidth = get_screenwidth()
+            currheight, currwidth = get_screengeom()
+            currheight -= 1
             numfields = currwidth // self.fieldwidth
             fieldformat = '{{0:>{0}}}:{{1:{1}}}'.format(self.nodenamelen,
                                                         self.textlen)
             sys.stdout.write('\x1b[2J\x1b[;H')  # clear screen
+            if len(self.nodelist) < (numfields * currheight):
+                numfields = len(self.nodelist) // currheight + 1
         else:
             numfields = 1
             fieldformat = '{0}: {1}'
-        currfields = 0
-        for node in self.nodelist:
-            if currfields >= numfields:
+        if self.squeeze:
+            columns = [self.nodelist[x:x+currheight] for x in range(0, len(self.nodelist), currheight)]
+            for currow in range(0, len(columns[0])):
+                for col in columns:
+                    try:
+                        node = col[currow]
+                        sys.stdout.write(fieldformat.format(node, self.nodeoutput[node]))
+                    except IndexError:
+                        break
+                sys.stdout.write('\n')
+        else:
+            for node in self.nodelist:
+                sys.stdout.write(fieldformat.format(node, self.nodeoutput[node]))
                 sys.stdout.write('\n')
-                currfields = 1
-            else:
-                currfields += 1
-            sys.stdout.write(fieldformat.format(node, self.nodeoutput[node]))
-        sys.stdout.write('\n')
         sys.stdout.flush()
 
 
@@ -80,8 +88,8 @@ class ScreenPrinter(object):
 if __name__ == '__main__':
     import confluent.client as client
     c = client.Command()
-    p = ScreenPrinter('n1-n13', c)
-    p.set_output('n3', 'Upload: 67%')
+    p = ScreenPrinter('d1-d12', c)
+    p.set_output('d3', 'Upload: 67%')
 
 
 

confluent_client/confluent/tlv.py

@@ -17,4 +17,4 @@
 
 
 class Types(object):
-    text, json = range(2)
+    text, json, filehandle = range(3)

confluent_client/confluent/tlvdata.py

@@ -15,9 +15,15 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
+import array
+import ctypes
+import ctypes.util
 import confluent.tlv as tlv
+import eventlet.green.socket as socket
+import eventlet.green.select as select
 from datetime import datetime
 import json
+import os
 import struct
 
 try:
@@ -30,6 +36,72 @@ try:
 except NameError:
     pass
 
+class iovec(ctypes.Structure):   # from uio.h
+    _fields_ = [('iov_base', ctypes.c_void_p),
+                ('iov_len', ctypes.c_size_t)]
+
+
+iovec_ptr = ctypes.POINTER(iovec)
+
+
+class cmsghdr(ctypes.Structure):  # also from bits/socket.h
+    _fields_ = [('cmsg_len', ctypes.c_size_t),
+                ('cmsg_level', ctypes.c_int),
+                ('cmsg_type', ctypes.c_int)]
+
+    @classmethod
+    def init_data(cls, cmsg_len, cmsg_level, cmsg_type, cmsg_data):
+        Data = ctypes.c_ubyte * ctypes.sizeof(cmsg_data)
+        class _flexhdr(ctypes.Structure):
+            _fields_ = cls._fields_ + [('cmsg_data', Data)]
+
+        datab = Data(*bytearray(cmsg_data))
+        return _flexhdr(cmsg_len=cmsg_len, cmsg_level=cmsg_level,
+                        cmsg_type=cmsg_type, cmsg_data=datab)
+
+
+def CMSG_LEN(length):
+    sizeof_cmshdr = ctypes.sizeof(cmsghdr)
+    return ctypes.c_size_t(CMSG_ALIGN(sizeof_cmshdr).value + length)
+
+
+SCM_RIGHTS = 1
+
+
+class msghdr(ctypes.Structure):  # from bits/socket.h
+    _fields_ = [('msg_name', ctypes.c_void_p),
+                ('msg_namelen', ctypes.c_uint),
+                ('msg_iov', ctypes.POINTER(iovec)),
+                ('msg_iovlen', ctypes.c_size_t),
+                ('msg_control', ctypes.c_void_p),
+                ('msg_controllen', ctypes.c_size_t),
+                ('msg_flags', ctypes.c_int)]
+
+
+def CMSG_ALIGN(length):  # bits/socket.h
+    ret = (length + ctypes.sizeof(ctypes.c_size_t) - 1
+           & ~(ctypes.sizeof(ctypes.c_size_t) - 1))
+    return ctypes.c_size_t(ret)
+
+
+def CMSG_SPACE(length):  # bits/socket.h
+    ret = CMSG_ALIGN(length).value + CMSG_ALIGN(ctypes.sizeof(cmsghdr)).value
+    return ctypes.c_size_t(ret)
+
+
+class ClientFile(object):
+    def __init__(self, name, mode, fd):
+        self.fileobject = os.fdopen(fd, mode)
+        self.filename = name
+
+libc = ctypes.CDLL(ctypes.util.find_library('c'))
+recvmsg = libc.recvmsg
+recvmsg.argtypes = [ctypes.c_int, ctypes.POINTER(msghdr), ctypes.c_int]
+recvmsg.restype = ctypes.c_int
+sendmsg = libc.sendmsg
+sendmsg.argtypes = [ctypes.c_int, ctypes.POINTER(msghdr), ctypes.c_int]
+sendmsg.restype = ctypes.c_size_t
+
 def decodestr(value):
     ret = None
     try:
@@ -65,7 +137,7 @@ def _unicode_list(currlist):
             _unicode_list(currlist[i])
 
 
-def send(handle, data):
+def send(handle, data, filehandle=None):
     if isinstance(data, unicode):
         try:
             data = data.encode('utf-8')
@@ -93,9 +165,27 @@ def send(handle, data):
         if tl > 16777215:
             raise Exception("JSON data exceeds protocol limits")
         # xor in the type (0b1 << 24)
-        tl |= 16777216
-        handle.sendall(struct.pack("!I", tl))
-        handle.sendall(sdata)
+        if filehandle is None:
+            tl |= 16777216
+            handle.sendall(struct.pack("!I", tl))
+            handle.sendall(sdata)
+        else:
+            tl |= (2 << 24)
+            handle.sendall(struct.pack("!I", tl))
+            cdtype = ctypes.c_ubyte * len(sdata)
+            cdata = cdtype.from_buffer(bytearray(sdata))
+            ciov = iovec(iov_base=ctypes.addressof(cdata),
+                         iov_len=ctypes.c_size_t(ctypes.sizeof(cdata)))
+            fd = ctypes.c_int(filehandle)
+            cmh = cmsghdr.init_data(
+                cmsg_len=CMSG_LEN(
+                    ctypes.sizeof(fd)), cmsg_level=socket.SOL_SOCKET,
+                    cmsg_type=SCM_RIGHTS, cmsg_data=fd)
+            mh = msghdr(msg_name=None, msg_len=0, msg_iov=iovec_ptr(ciov),
+                        msg_iovlen=1, msg_control=ctypes.addressof(cmh),
+                        msg_controllen=ctypes.c_size_t(ctypes.sizeof(cmh)))
+            sendmsg(handle.fileno(), mh, 0)
+
 
 def recvall(handle, size):
     rd = handle.recv(size)
@@ -125,12 +215,42 @@ def recv(handle):
     datatype = (tl & 2130706432) >> 24  # grab 7 bits from near beginning
     if dlen == 0:
         return None
-    data = handle.recv(dlen)
-    while len(data) < dlen:
-        ndata = handle.recv(dlen - len(data))
-        if not ndata:
-            raise Exception("Error reading data")
-        data += ndata
+    if datatype == tlv.Types.filehandle:
+        filehandles = array.array('i')
+        rawbuffer = bytearray(2048)
+        pkttype = ctypes.c_ubyte * 2048
+        data = pkttype.from_buffer(rawbuffer)
+        cmsgsize = CMSG_SPACE(ctypes.sizeof(ctypes.c_int)).value
+        cmsgarr = bytearray(cmsgsize)
+        cmtype = ctypes.c_ubyte * cmsgsize
+        cmsg = cmtype.from_buffer(cmsgarr)
+        cmsg.cmsg_level = socket.SOL_SOCKET
+        cmsg.cmsg_type = SCM_RIGHTS
+        cmsg.cmsg_len = CMSG_LEN(ctypes.sizeof(ctypes.c_int))
+        iov = iovec()
+        iov.iov_base = ctypes.addressof(data)
+        iov.iov_len = 2048
+        msg = msghdr()
+        msg.msg_iov = ctypes.pointer(iov)
+        msg.msg_iovlen = 1
+        msg.msg_control = ctypes.addressof(cmsg)
+        msg.msg_controllen = ctypes.sizeof(cmsg)
+        select.select([handle], [], [])
+        i = recvmsg(handle.fileno(), ctypes.pointer(msg), 0)
+        cdata = cmsgarr[CMSG_LEN(0).value:]
+        data = rawbuffer[:i]
+        if cmsg.cmsg_level == socket.SOL_SOCKET and cmsg.cmsg_type == SCM_RIGHTS:
+            filehandles.fromstring(bytes(
+                cdata[:len(cdata) - len(cdata) % filehandles.itemsize]))
+        data = json.loads(bytes(data))
+        return ClientFile(data['filename'], data['mode'], filehandles[0])
+    else:
+        data = handle.recv(dlen)
+        while len(data) < dlen:
+            ndata = handle.recv(dlen - len(data))
+            if not ndata:
+                raise Exception("Error reading data")
+            data += ndata
     if datatype == tlv.Types.text:
         return data
     elif datatype == tlv.Types.json:

confluent_client/confluent_client.spec.tmpl

@@ -27,15 +27,23 @@ a confluent server.
 %if "%{dist}" == ".el8"
 python3 setup.py build
 %else
+%if "%{dist}" == ".el9"
+python3 setup.py build
+%else
 python2 setup.py build
 %endif
+%endif
 
 %install
 %if "%{dist}" == ".el8"
 python3 setup.py install --single-version-externally-managed -O1 --root=$RPM_BUILD_ROOT --record=INSTALLED_FILES --install-scripts=/opt/confluent/bin --install-purelib=/opt/confluent/lib/python
 %else
+%if "%{dist}" == ".el9"
+python3 setup.py install --single-version-externally-managed -O1 --root=$RPM_BUILD_ROOT --record=INSTALLED_FILES --install-scripts=/opt/confluent/bin --install-purelib=/opt/confluent/lib/python
+%else
 python2 setup.py install --single-version-externally-managed -O1 --root=$RPM_BUILD_ROOT --record=INSTALLED_FILES --install-scripts=/opt/confluent/bin --install-purelib=/opt/confluent/lib/python
 %endif
+%endif
 
 
 %clean

confluent_client/confluent_env.sh

@@ -37,7 +37,7 @@ alias nodereseat='CURRENT_CMDLINE=$(HISTTIMEFORMAT= builtin history 1); export C
 alias noderun='CURRENT_CMDLINE=$(HISTTIMEFORMAT= builtin history 1); export CURRENT_CMDLINE; noderun'
 alias nodesensors='CURRENT_CMDLINE=$(HISTTIMEFORMAT= builtin history 1); export CURRENT_CMDLINE; nodesensors'
 alias nodesetboot='CURRENT_CMDLINE=$(HISTTIMEFORMAT= builtin history 1); export CURRENT_CMDLINE; nodesetboot'
-alias nodestorage='CURRENT_CMDLINE=$(HISTTIMEFORMAT= builtin history 1); export CURRENT_CMDLINE; nodestorage'
+alias nodestorage='CURRENT_CMDLINE=$(HISTTIMEFORMAT= builtin history 1); export CURRENT_CMDLINE; nodestorage -i'
 alias nodeshell='CURRENT_CMDLINE=$(HISTTIMEFORMAT= builtin history 1); export CURRENT_CMDLINE; nodeshell'
 alias nodelicense='CURRENT_CMDLINE=$(HISTTIMEFORMAT= builtin history 1); export CURRENT_CMDLINE; nodelicense'
 # Do not continue for non-bash shells, the rest of this sets up bash completion functions
@@ -91,7 +91,7 @@ _confluent_nodeidentify_completion()
 
 _confluent_nodesetboot_completion()
 {
-    COMP_CANDIDATES=("default,cd,network,setup,hd,floppy -h -b -p")
+    COMP_CANDIDATES=("default,cd,network,setup,hd,floppy,usb -h -b -p")
     _confluent_generic_completion
 }
 
@@ -156,6 +156,40 @@ _confluent_osimage_completion()
     fi
 }
 
+_confluent_imgutil_completion()
+{
+    _confluent_get_args
+    if [ $NUMARGS == 2 ]; then
+        COMPREPLY=($(compgen -W "build exec unpack pack capture" -- ${COMP_WORDS[COMP_CWORD]}))
+        return
+    elif [ ${CMPARGS[1]} == 'build' ]; then
+        COMPREPLY=($(compgen -W "-s $(ls /var/lib/confluent/distributions)" -- ${COMP_WORDS[COMP_CWORD]}))
+	    return
+    elif [ ${CMPARGS[1]} == 'unpack' ]; then
+        if [ $NUMARGS == 3 ]; then
+            COMPREPLY=($(compgen -W "-s $(ls /var/lib/confluent/public/os)" -- ${COMP_WORDS[COMP_CWORD]}))
+            return
+        fi
+        compopt -o dirnames
+	    return
+    elif [ ${CMPARGS[1]} == 'pack' ]; then
+        if [ $NUMARGS == 3 ]; then
+            compopt -o dirnames
+        fi
+        COMPREPLY=()
+        return
+    elif [ ${CMPARGS[1]} == 'capture' ]; then
+        if [ $NUMARGS == 3 ]; then
+            _confluent_nn_completion
+            return
+        fi
+        return
+    elif [ ${CMPARGS[1]} == 'exec' ]; then
+        compopt -o dirnames
+	    COMPREPLY=($(compgen -W "-v" -- ${COMP_WORDS[COMP_CWORD]}))
+        return
+    fi
+}
 _confluent_nodedeploy_completion()
 {
     _confluent_get_args
@@ -238,9 +272,6 @@ _confluent_nodeattrib_completion()
 _confluent_nn_completion()
 {
     _confluent_get_args
-    if [ $NUMARGS -gt 2 ]; then
-        return;
-    fi
     INPUT=${COMP_WORDS[COMP_CWORD]}
     INPUT=${INPUT##*,-}
     INPUT=${INPUT##*,}
@@ -302,6 +333,7 @@ complete -F _confluent_nr_completion nodeeventlog
 complete -F _confluent_nodefirmware_completion nodefirmware
 complete -F _confluent_nodedeploy_completion nodedeploy
 complete -F _confluent_osimage_completion osdeploy
+complete -F _confluent_imgutil_completion imgutil
 complete -F _confluent_ng_completion nodegroupattrib
 complete -F _confluent_ng_completion nodegroupremove
 complete -F _confluent_nr_completion nodehealth

confluent_client/doc/man/collate.ronn

@@ -3,7 +3,7 @@ collate(1) -- Organize text input by node
 
 ## SYNOPSIS
 
-`<other command> | collate [-a] [-d] [-w] [-s] [-c] [-r] [-l lognametemplate]`
+`<other command> | collate [-a] [-b] [-d] [-w] [-g] [-s] [-c] [-r] [-l lognametemplate]`
 
 ## DESCRIPTION
 
@@ -21,30 +21,41 @@ node and group names sorted alphanumerically.
    when output differs along a telling group boundary.  For example, if
    output suggests a large number of nodes are unreachable, abbreviate
    showing 'rack1' as being unreachable may make more obvious a possible cause.
+   
+* `-b BASE`, `--base=BASE`:
+   Use given node as reference for comparison when using
+   -d, instead of using the most common result      
 
 * `-d`, `--diff`:
    Express all but the most common result group in terms of diff from
    the most common result group
-
-* `-l`, `--log`:
-   Save output per node to individual log files, replacing {node} in the name
-   with the nodename of each
-
+   
 * `-w`, `--watch`:
    Update results dynamically as data becomes available, rather than
    waiting    for the command to fully complete.
-
+   
+* `-g`, `--groupcount`:
+   Show count of output groups rather than the actual
+   output
+   
 * `-s`, `--skipcommon`:
    Suppress printing of the most common result text group.  This is used to
    focus on stray output against a well known and expected result.
    
 * `-c`, `--count`:
    Print a count of the number of nodes in an output group under the 
-  noderange.
+   noderange.
   
- * `-r`, `--reverse`:
-    Rather than starting with most common to least common, start with
-    the least common and print the most common last.
+* `-r`, `--reverse`:
+   Rather than starting with most common to least common, start with
+   the least common and print the most common last.
+    
+* `-l LOG`, `--log=LOG`:
+   Save output per node to individual log files, replacing {node} in the name
+   with the nodename of each
+   
+* `-h`, `--help`:
+   Show help message and exit   
    
 ## EXAMPLES
  * Organizing power state of multiple nodes:  

confluent_client/doc/man/collective.ronn

@@ -7,6 +7,7 @@ collective(1) -- Check and manage a confluent collective
 `collective join <server> [-i TOKEN]`  
 `collective show`  
 `collective gencert`  
+`collective delete`  
 
 
 ## DESCRIPTION
@@ -36,6 +37,9 @@ on circumstances.
 
  * `-i`:
     Provide the token as an argument rather than interactively.
+    
+* `-h`, `--help`:
+  Show help message and exit    
    
 ## EXAMPLES
  * Inviting a server called mgt2:

confluent_client/doc/man/confetty.ronn

@@ -15,6 +15,21 @@ be mostly an aid for developing client software, with
 day to day administration generally being easier with
 the various function specific commands.
 
+## OPTIONS
+
+* `-s SERVER:PORT`, `--server=SERVER:PORT`:
+  Confluent instance to connect to
+
+* `-c PATH`, `--control=PATH`:
+  Path to offer terminal control
+
+* `-m MINTIME`, `--mintime=MINTIME`:
+  Minimum time to run or else pause for input (used to
+  keep a terminal from closing quickly on error)
+  
+* `-h`, `--help`:
+  Show help message and exit  
+
 ## COMMANDS
 
 The CLI may be navigated by shell commands and some other

confluent_client/doc/man/confluentdbutil.ronn

@@ -3,8 +3,7 @@ confluentdbutil(8) -- Backup or restore confluent database
 
 ## SYNOPSIS
 
-
-`confluentdbutil [options] <dump|restore> <path>`
+`confluentdbutil [options] [dump|restore] <path>`
 
 ## DESCRIPTION
 
@@ -16,11 +15,28 @@ the json files (password protected, removed from the files, or unprotected).
 
 ## OPTIONS
 
-* `-p`, `--password`:
+* `-p PASSWORD`, `--password=PASSWORD`:
   If specified, information such as usernames and passwords will be encrypted
   using the given password.
+  
+* `-i`, `--interactivepassword`:
+  Prompt for password.  
+  
 * `-r`, `--redact`:
   Indicates to replace usernames and passwords with a dummy string rather
   than included.
+  
 * `-u`, `--unprotected`:
-  The keys.json file will include the encryption keys without any protection.
+  The keys.json file will include the encryption keys without any protection.
+  
+* `-s`, `--skipkeys`:
+  This specifies to dump the encrypted data without
+  dumping the keys needed to decrypt it.  This is
+  suitable for an automated incremental backup, where an
+  earlier password protected dump has a protected
+  keys.json file, and only the protected data is needed.
+  keys do not change and as such they do not require
+  incremental backup.
+  
+  * `-h`, `--help`:
+  Show help message and exit

confluent_client/doc/man/nodeattrib.ronn.tmpl

@@ -34,18 +34,37 @@ For the `groups` attribute, it is possible to add a group by doing
 `groups,=<newgroup>` and to remove by doing `groups^=<oldgroup>`
 
 Note that `nodeattrib <group>` will likely not provide the expected behavior.
-See nodegroupattrib(8) command on how to manage attributes on a group level.
+See nodegroupattrib(8) command on how to manage attributes on a group level.  Running
+nodeattrib on a group will simply set node-specific attributes on each individual
+member of the group.
+
+Additionally, if wanting to change from a node level attribute value to inherit from a
+member group, it is required to use '-c' to clear the attribute.  Conversely, assigning
+to a blank value will allow masking a group defined attribute with an empty value.
 
 ## OPTIONS
 
 * `-b`, `--blame`:
   Annotate inherited and expression based attributes to show their base value.
+  
 * `-c`, `--clear`:
-  Clear specified nodeattributes
+  Clear specified nodeattributes.
+  
 * `-e`, `--environment`:
-  Set specified attributes based on exported environment variable of matching name.  Environment variable names may be lower case or all upper case.  Replace . with _ as needed (e.g. info.note may be specified as either $info_note or $INFO_NOTE
+  Set specified attributes based on exported environment variable of matching name. 
+  Environment variable names may be lower case or all upper case. 
+  Replace . with _ as needed (e.g. info.note may be specified as either $info_note or $INFO_NOTE
+  
 * `-p`, `--prompt`:
-  Request interactive prompting to provide values rather than the command line or environment variables.
+  Request interactive prompting to provide values rather than the command line
+  or environment variables.
+  
+* `-m MAXNODES`, `--maxnodes=MAXNODES`:
+  Prompt if trying to set attributes on more than
+  specified number of nodes.
+
+* `-h`, `--help`:
+  Show help message and exit
 
 ## EXAMPLES
 * Listing matching nodes of a simple noderange:

confluent_client/doc/man/nodebmcreset.ronn

@@ -9,6 +9,15 @@ nodebmcreset(8) -- Reset management controller
 
 `nodebmcreset` allows you to reset the management controller of the specified noderange
 
+## OPTIONS
+
+* `-m MAXNODES`, `--maxnodes=MAXNODES`:
+  Number of nodes to affect before prompting for
+  confirmation
+  
+* `-h`, `--help`:
+  Show help message and exit  
+
 ## EXAMPLES:
 
 * Reset the management controller for nodes n1 through n4:

confluent_client/doc/man/nodeboot.ronn

@@ -3,8 +3,7 @@ nodeboot(8) -- Reboot a confluent node to a specific device
 
 ## SYNOPSIS
 
-`nodeboot <noderange>`  
-`nodeboot [options] <noderange>` [default|cd|network|setup|hd]  
+`nodeboot [options] <noderange> [default|cd|network|setup|hd]`  
 
 ## DESCRIPTION
 
@@ -25,6 +24,13 @@ device without inducing a reboot, see the `nodesetboot` command.
 * `-p`, `--persist`:
   For a system that supports it, mark the boot override to persist rather than
   be a one time change.  Many systems do not support this functionality.
+  
+* `-m MAXNODES`, `--maxnodes=MAXNODES`:
+  Specify a maximum number of nodes to boot, prompting
+  if over the threshold
+  
+* `-h`, `--help`:
+  Show help message and exit  
 
 * `default`:
   Request a normal default boot with no particular device override

confluent_client/doc/man/nodeconfig.ronn

@@ -3,8 +3,7 @@ nodeconfig(8) -- Show or change node configuration
 
 ## SYNOPSIS
 
-`nodeconfig <noderange> [options] [<configuration>..]`  
-`nodeconfig <noderange> [options] [<configuration=value>..]`  
+`nodeconfig [options] <noderange> [setting|setting=value]`
 
 ## DESCRIPTION
 
@@ -14,6 +13,12 @@ running configuration on the node firmware.  Calling without '=' will show the
 current value, and '=' will change the value.  Network information can be
 given as a node expression, as documented in the man page for nodeattribexpressions(5).
 
+Note that when using nodeconfig to submit changes, it will exit when the change
+is accepted, but the endpoint may not have fully processed it. Doing a show
+immediately after doing a set may reflect older information. Also, if changing
+BIOS/UEFI settings, the change may appear in output, but generally won't
+actually be in effect until a reboot.
+
 ## OPTIONS
 
 * `-c`, `--comparedefault`:
@@ -21,6 +26,13 @@ given as a node expression, as documented in the man page for nodeattribexpressi
   no configuration values are specified, it will show only those that differ.
   If combined with `-x`, will show all differing values except those indicated
   by `-x`
+  
+* `-b settings.batch`, `--batch=settings.batch`:
+   Provide arguments as lines of a file, rather than the command line.  
+   
+* `-d`, `--detail`:
+  Provide detailed data as available.  This can include help text and valid
+  values for a setting.   
 
 * `-e`, `--extra`:
    Read settings that are generally not needed, but may be slow to retrieve.
@@ -31,18 +43,21 @@ given as a node expression, as documented in the man page for nodeattribexpressi
   Rather than listing only the specified configuration parameters, list all
   attributes except for the specified ones
 
-* `-d`, `--detail`:
-  Provide detailed data as available.  This can include help text and valid
-  values for a setting.
+* `-a`, `--advanced`:
+  Include advanced settings, which are normally not intended to be used
+  without direction from the relevant server vendor.
 
-* `-r`, `--restoredefault`:
+* `-r COMPONENT`, `--restoredefault=COMPONENT`:
   Request that the specified component of the targeted nodes will have its
   configuration reset to default.  Currently the only component implemented
   is uefi.
 
-* `-b`, '--batch':
-   Provide arguments as lines of a file, rather than the command line.
-
+* `-m MAXNODES`, `--maxnodes=MAXNODES`:
+  Specify a maximum number of nodes to configure, prompting if over 
+  the threshold  
+  
+* `-h`, `--help`:
+  Show help message and exit  
 
 ## EXAMPLES
 * Showing the current IP configuration of noderange BMC/IMM/XCC:

confluent_client/doc/man/nodedeploy.ronn

@@ -3,9 +3,7 @@ nodedeploy(8) -- Request preparation and/or initiating a node deployment
 
 ## SYNOPSIS
 
-`nodedeploy <noderange>`  
-`nodedeploy <noderange> -c`  
-`nodedeploy <noderange> [-n] [-p] <name of profile>`  
+`nodedeploy [-h] [-c] [-n] [-p] [-m MAXNODES] <noderange> [profile]`  
 
 ## DESCRIPTION
 
@@ -19,7 +17,7 @@ deployment status.
 
 ## OPTIONS
 
-* '-c', '--clear`:
+* `-c`, `--clear`:
   Remove any pending deployment action
 
 * `-n`, `--network`:
@@ -28,6 +26,12 @@ deployment status.
 * `-p`, `--prepareonly`:
   Prepare the network services for deployment, but do not interact with BMCs. This is intended for scenarios where
   the boot device control and server restart will be handled outside of confluent.
+  
+* `-m MAXNODES`, `--maxnodes=MAXNODES`: 
+  Specifiy a maximum nodes to be deployed.
+  
+* `-h`, `--help`:
+  Show help message and exit  
 
 ## EXAMPLES
 * Begin the instalalation of a profile of CentOS 8.2:  

confluent_client/doc/man/nodeeventlog.ronn

@@ -3,14 +3,22 @@ nodeeventlog(8) -- Pull eventlog from confluent nodes
 
 ## SYNOPSIS
 
-`nodeeventlog <noderange>`  
-`nodeeventlog <noderange> [clear]`
+`nodeeventlog [options] <noderange> [clear]`  
 
 ## DESCRIPTION
 
 `nodeeventlog` pulls and optionally clears the event log from the requested
 noderange.
 
+## OPTIONS
+
+* `-m MAXNODES`, `--maxnodes=MAXNODES`:
+  Specify a maximum number of nodes to clear if clearing log, prompting if 
+  over the threshold 
+  
+* `-h`, `--help`:
+  Show help message and exit  
+
 ## EXAMPLES
 * Pull the event log from n2 and n3:
   `# nodeeventlog n2,n3`  

confluent_client/doc/man/nodefirmware.ronn

@@ -3,9 +3,7 @@ nodefirmware(8) -- Report firmware information on confluent nodes
 
 ## SYNOPSIS
 
-`nodefirmware <noderange>`  
-`nodefirmware <noderange> list|<components>|core`  
-`nodefirmware <noderange> update [--backup] <filename>`  
+`nodefirmware <noderange> [list][update [--backup <file>]]|[<components>]`
 
 ## DESCRIPTION
 
@@ -26,6 +24,18 @@ the out of band facilities.  Firmware updates can end in one of three states:
 * `pending`:  The firmware update process has completed, but the firmware will not be active until the relevant component next resets.  Generally speaking, for UEFI update the system will need a reboot, and for BMC updates, the `nodebmcreset` command will begin the process to activate the firmware.
 * `complete`:  The firmware update process has completed and activation has proceeded.  Note that while the activation process has commenced, the component may still be in the process of rebooting when nodefirmware exits.
 
+## OPTIONS
+
+* `-b`, `--backup`:
+  Target a backup bank rather than primary
+  
+* `-m MAXNODES`, `--maxnodes=MAXNODES`:
+  When updating, prompt if more than the specified number of servers will 
+  be affected  
+  
+* `-h`, `--help`:
+  Show help message and exit    
+
 ## EXAMPLES
 
 * Pull firmware from a node:

confluent_client/doc/man/nodegroupattrib.ronn.tmpl

@@ -25,8 +25,20 @@ the attributes are set on the node versus a group to which a node belongs.
 
 ## OPTIONS
 
+* `-b`, `--blame`:
+  Show information about how attributes inherited
+
+* `-e`, `--environment`:
+  Set attributes, but from environment variable of same name
+
 * `-c`, `--clear`:
   Clear specified nodeattributes.
+  
+* `-p`, `--prompt`:
+  Prompt for attribute values interactively
+  
+* `-h`, `--help`:
+  Show help message and exit  
 
 ## EXAMPLES
 

confluent_client/doc/man/nodelicense.ronn

@@ -3,15 +3,22 @@ nodelicense(8) -- Manage license keys on BMC
 
 ## SYNOPSIS
 
-`nodelicense <noderange> [list|install <filename>|delete <license>|save <directory>]`
+`nodelicense <noderange> [list][install <license_filename>|save <directory>|delete <license_feature_name>]`
 
 ## DESCRIPTION
 
 `nodelicense` manages license keys on supported BMCs. Without an argument, the command
 lists currently installed license.  Using `delete` will remove the specified license name
-from th eBMC.  The `save` subcommand will take the passed directory (which may be in the form
+from the BMC.  The `save` subcommand will take the passed directory (which may be in the form
 of /path/to/{node}/ to have the node name substituted for each node) and back up installed licenses
 to that directory. The `install` command will take the specified filename and install.  The filename
 argument may be of the form  xcc_fod_0034_7X21{id.serial}.key to have the serial number substituted
 to allow unique licenses to be specified in a single command.
 
+## OPTIONS
+
+* `-m MAXNODES`, `--maxnodes=MAXNODES`:
+  Specify a maximum number of nodes to delete licenses from, prompting if over the threshold
+  
+* `-h`, `--help`:
+  Show help message and exit

confluent_client/doc/man/nodemedia.ronn

@@ -34,8 +34,8 @@ the host platform attempts.
 
 ## OPTIONS
 
-* `-c`:
-  Specify the maximum number of instances to run concurrently.
+* `-h`, `--help`:
+  Show help message and exit
 
 ## EXAMPLES
 * Listing currently mounted media:

confluent_client/doc/man/nodepower.ronn

@@ -3,8 +3,7 @@ nodepower(8) -- Check or change power state of confluent nodes
 
 ## SYNOPSIS
 
-`nodepower <noderange>`  
-`nodepower <noderange> [-p] [on|off|boot|shutdown|reset|status]`
+`nodepower [options] <noderange> ([status|on|off|shutdown|boot|reset])`
 
 ## DESCRIPTION
 
@@ -28,8 +27,15 @@ off will not react to this request.
 
 ## OPTIONS
 
-* `-p`, '--showprevious':
+* `-p`, `--showprevious`:
    Show previous power state for all directives that may change power state.
+   
+* `-m MAXNODES`, `--maxnodes=MAXNODES`:
+   Specify a maximum number of nodes to change power state, prompting if
+   over the threshold
+   
+* `-h`, `--help`:
+  Show help message and exit   
 
 ## EXAMPLES
 * Get power state of nodes n1 through n4:

confluent_client/doc/man/noderemove.ronn

@@ -9,6 +9,14 @@ noderemove(8) -- Remove nodes from the confluent management service
 
 `noderemove` simply removes the given noderange from the confluent database.
 
+## OPTIONS
+
+* `-m MAXNODES`, `--maxnodes=MAXNODES`:
+    Specify a maximum number of nodes to delete, prompting if over the
+    threshold
+    
+* `-h`, `--help`:
+  Show help message and exit    
 
 ## EXAMPLES
 
@@ -22,4 +30,3 @@ noderemove(8) -- Remove nodes from the confluent management service
     `r2u3: deleted`  
     `r2u2: deleted`  
     `r2u1: deleted`  
-

confluent_client/doc/man/nodereseat.ronn

@@ -11,9 +11,16 @@ nodereseat(8) -- Request a reseat of a node
 node's slot.  This should be equivalent to removing the system entirely from
 the chassis and putting it back in, but without actually having to do so.
 
+## OPTIONS
+
+* `-m MAXNODES`, `--maxnodes=MAXNODES`:
+    Specify a maximum number of nodes to reseat, prompting if over the threshold
+    
+* `-h`, `--help`:
+  Show help message and exit    
+
 ## EXAMPLES
 
 * Reseating the node `s1`:
     `# nodereseat s1`  
     `s1: Reseat successful`  
-

confluent_client/doc/man/nodersync.ronn

@@ -12,10 +12,14 @@ noderange. This will present progress as percentage for all nodes.
 
 ## OPTIONS
 
-* `-m`:
-  Specify maximum number of nodes for noderange max.
-
-* `-c`:
+* `-f COUNT`, `-c COUNT`, `--count=COUNT`:
   Specify how many rsync executions to do concurrently.  If noderange
   exceeds the count, then excess nodes will wait until one of the
-  active count completes.
+  active count completes. 
+  
+* `-m MAXNODES`, `--maxnodes=MAXNODES`:
+  Specify a maximum number of nodes to run rsync to, prompting if over the
+  threshold
+  
+* `-h`, `--help`:
+  Show help message and exit

confluent_client/doc/man/noderun.ronn

@@ -3,7 +3,7 @@ noderun(8) -- Run arbitrary commands per node in a noderange
 
 ## SYNOPSIS
 
-`noderun <noderange> <command string>`
+`noderun [options] <noderange> <command expression>`
 
 ## DESCRIPTION
 
@@ -13,6 +13,21 @@ nodeattribexpressions(5) are expanded prior to execution of the command.  For
 noderun, the commands are locally executed.  To execute commands on the nodes
 themselves, see nodeshell(8).
 
+## OPTIONS
+
+* `-f COUNT`, `-c COUNT`, `--count=COUNT`:
+  Number of commands to run at a time
+  
+* `-n`, `--nonodeprefix`:
+  Do not prefix output with node names
+  
+* `-m MAXNODES`, `--maxnodes=MAXNODES`:
+  Specify a maximum number of nodes to run the command with, prompting if over
+  the threshold
+  
+* `-h`, `--help`:
+  Show help message and exit
+
 ## EXAMPLES
 
 * Run ping against nodes n1 through n4:

confluent_client/doc/man/nodesetboot.ronn

@@ -2,9 +2,8 @@ nodesetboot(8) -- Check or set next boot device for noderange
 ====================================================
 
 ## SYNOPSIS
-
-`nodesetboot <noderange>`  
-`nodesetboot [options] <noderange> [default|cd|network|setup|hd|floppy]`
+  
+`nodesetboot [options] <noderange> [default|cd|network|setup|hd|usb|floppy]`
 
 ## DESCRIPTION
 
@@ -21,6 +20,8 @@ to use `nodesetboot <noderange> setup` and then initiate a reboot from within
 the operating system with ssh or similar rather than using the remote hardware
 control.
 
+Running the command with no target queries the current setting.
+
 ## OPTIONS
 
 * `-b`, `--bios`:
@@ -33,6 +34,13 @@ control.
 
 * `-u`, `--uefi`:
   This flag does nothing, it is for command compatibility with xCAT's rsetboot
+  
+* `-m MAXNODES`, `--maxnodes=MAXNODES`:
+  Specify a maximum number of nodes to modify next boot device, prompting if
+  over the threshold
+  
+* `-h`, `--help`:
+  Show help message and exit  
 
 * `default`:
   Request a normal default boot with no particular device override
@@ -46,6 +54,10 @@ control.
   Request boot from floppy.  Generally speaking firmware uses this to mean a USB
   flash drive or similar (whether virtual or physical).
 
+* `usb`:
+  Request boot from usb.  Generally speaking firmware uses this to mean a USB
+  flash drive or similar (whether virtual or physical).
+
 * `network`:
   Request boot to network
   

confluent_client/doc/man/nodeshell.ronn

@@ -3,7 +3,7 @@ nodeshell(8) -- Execute command on many nodes in a noderange through ssh
 
 ## SYNOPSIS
 
-`nodeshell <noderange> [options] <command to execute on each node>`
+`nodeshell [options] <noderange> <command to execute on each node>`
 
 ## DESCRIPTION
 
@@ -13,9 +13,29 @@ nodeattribexpressions(5).  `nodeshell` provides stdout as stdout and stderr
 as stderr, unlike psh which combines all stdout and stderr into stdout.
 
 ## OPTIONS
+  
+* `-c COUNT`, `-f COUNT`, `--count=COUNT`
+  Specify the maximum number of instances to run concurrently
 
-* `-c`:
-  Specify the maximum number of instances to run concurrently.
+* `-l LOGINNAME`, `--loginname=LOGINNAME`
+  Username to use when connecting, defaults to current user.
+
+* `-m MAXNODES`, `--maxnodes=MAXNODES`
+  Specify a maximum number of nodes to run remote ssh command to, prompting
+  if over the threshold
+ 
+* `-n`, `--nonodeprefix`
+  Do not prefix output with node names  
+
+* `-p PORT`, `--port=PORT`
+  Specify a custom port for ssh
+
+* `-s SUBSTITUTION`, `--substitutename=SUBSTITITUTION`
+  Specify a substitution name instead of the nodename.  If no {} are in the substitution,
+  it is considered to be an append.  For example, '-s -ib' would produce 'node1-ib' from 'node1'.
+  Full expression syntax is supported, in which case the substitution is considered to be the entire
+  new name. {node}-ib would be equivalent to -ib.  For example, nodeshell -s {bmc} node1 
+  would ssh to the BMC instead of the node.
 
 ## EXAMPLES
 

confluent_client/doc/man/nodestorage.ronn

@@ -3,12 +3,15 @@ nodestorage(8) -- Examine/Modify storage configuration of a node
 
 ## SYNOPSIS
 
-`nodestorage <noderange> [show|create|delete] [options]`  
+`nodestorage <noderange> [show|create|delete|diskset] [hotspare|jbod|unconfigured] [options]`  
 
 ## DESCRIPTION
 
 `nodestorage` provides access to the remote storage configuration of
-the noderange.
+the noderange. The `show` subcommand will show current storage configuration,
+`create` can be used to create new arrays or volumes, `delete` can be used to
+remove volumes and arrays, and `diskset` can modify the usage of disks
+indicated by `-d` to either be `unconfigured`, `jbod`, or `hotspare`.
 
 ## OPTIONS
 * `-r` **RAIDLEVEL**, `--raidlevel`=**RAIDLEVEL**:
@@ -29,6 +32,15 @@ the noderange.
   volumes, or selecting a volume for delete.  Default
   behavior is to use implementation provided default
 
+* `-z` **STRIPSIZES**, `--stripsizes`=**STRIPSIZES**:
+  Comma separated list of stripsizes to use when creating volumes.
+  This value is in kilobytes.  The default behavior is to allow the
+  storage controller to decide
+
+* `-m` **MAXNODES**, `--maxnodes`=**MAXNODES**:
+  Specify a maximum number of nodes to configure storage on, prompting
+  if over the threshold
+
 ## EXAMPLES
 
 * Deleting the volume `somedata`:

confluent_client/doc/man/nodesupport.ronn

@@ -19,6 +19,15 @@ running in collective mode.
 Note that due to vendor filename requirements, any filename may have vendor
 specific suffixes added to any file produced.
 
+## OPTIONS
+
+* `-m MAXNODES`, `--maxnodes=MAXNODES`:
+  Specify a maximum number of nodes to download diagnostic data from, prompting
+  if over the threshold
+  
+* `-h`, `--help`:
+  Show help message and exit  
+
 ## EXAMPLES
 
 * Download support data from a single node to a specific filename  

confluent_client/doc/man/osdeploy.ronn

@@ -5,7 +5,7 @@ osdeploy(8) --- Configure general OS deployment facilities of confluent
 
 `osdeploy import <iso>`  
 `osdeploy updateboot <profile>`  
-`osdeploy initialize [-h] [-g] [-u] [-s] [-k] [-t] [-p] [-i] [-l]`  
+`osdeploy initialize [-h] [-g] [-u] [-s] [-k] [-t] [-p] [-i] [-l] [-a]`  
 
 ## DESCRIPTION
 

confluent_client/doc/man/stats.ronn

@@ -0,0 +1,49 @@
+stats(8) -- Common basic statistics on typical numeric data in output
+==============================
+
+## SYNOPSIS
+
+`<other command> | stats [-c N] [-d D] [-x|-g|-t|-o image.png] [-s N] [-v] [-b N]
+
+## DESCRIPTION
+
+The **stats** command helps analyze common numerical data such as performance numbers
+or temperatures or any other numerical value.
+
+By default it looks for the last numerical output on the first line to identify the numerical column
+and analyze that number. This can be overriden by **-c COLUMN** to indicate a column. By default,
+whitespace and commas are treated to delimit columns, and **-d DELIMITER** can be used to override.
+
+By default it outputs basic statistics, but a histogram is available either text or through X11 output
+or sixel or output to an image file depending on whether **-x**, **-g**, **-t*, or **-o image.png** is
+used.
+
+## OPTIONS
+
+ * `-c N`:
+   Select column number. Defaults to last column that appears numeric
+
+ * `-d D`:
+   Specify a custom column delimiter
+
+ * `-x`:
+     Output in Sixel format (supported by mlterm and PuTTY, among others)
+
+ * `-g`:
+   Try to open histogram as an X window
+
+ * `-t`:
+   Output histogram as bars rendered by =
+
+ * `-o image.png`:
+   Write graphical histogram to image.png.
+
+ * `-s N`:
+   Ignore specified number of lines as header content before processing numbers
+
+ * `-v`:
+   Treat value before : on each line as a label, and show which labels belong to which histogram buckets.
+
+ * `-b N`:
+   Specify a custom number of buckets for histogram. The default is 10.
+   

confluent_osdeploy/buildrpm

@@ -8,4 +8,15 @@ cd ..
 tar Jcvf confluent_osdeploy.tar.xz confluent_osdeploy
 mv confluent_osdeploy.tar.xz ~/rpmbuild/SOURCES/
 cd -
+mkdir -p el9bin/opt/confluent/bin
+mkdir -p el9bin/stateless-bin
+podman run --privileged --rm -v $(pwd)/utils:/buildutils -i -t fedorabuilder make -C /buildutils
+cd utils
+mv confluent_imginfo copernicus clortho autocons ../el9bin/opt/confluent/bin
+mv start_root urlmount ../el9bin/stateless-bin/
+make clean
+cd ..
+tar Jcvf confluent_el9bin.tar.xz el9bin/
+mv confluent_el9bin.tar.xz ~/rpmbuild/SOURCES/
+rm -rf el9bin
 rpmbuild -ba confluent_osdeploy.spec

confluent_osdeploy/common/initramfs/opt/confluent/bin/apiclient

@@ -0,0 +1,424 @@
+#!/usr/bin/python
+try:
+    import http.client as client
+except ImportError:
+    import httplib as client
+import ctypes
+import ctypes.util
+import glob
+import os
+import select
+import socket
+import subprocess
+import ssl
+import sys
+import struct
+import time
+
+class InvalidApiKey(Exception):
+    pass
+
+def msg_align(len):
+    return (len + 3) & ~3
+
+cryptname = ctypes.util.find_library('crypt')
+if not cryptname:
+    if os.path.exists('/lib64/libcrypt.so.2') or os.path.exists('/usr/lib64/libcrypt.so.2'):
+        cryptname = 'libcrypt.so.2'
+    else:
+        cryptname = 'libcrypt.so.1'
+c_libcrypt = ctypes.CDLL(cryptname)
+c_crypt = c_libcrypt.crypt
+c_crypt.argtypes = (ctypes.c_char_p, ctypes.c_char_p)
+c_crypt.restype = ctypes.c_char_p
+
+
+def get_my_addresses():
+    nlhdrsz = struct.calcsize('IHHII')
+    ifaddrsz = struct.calcsize('BBBBI')
+    # RTM_GETADDR = 22
+    # nlmsghdr struct: u32 len, u16 type, u16 flags, u32 seq, u32 pid
+    nlhdr = struct.pack('IHHII', nlhdrsz + ifaddrsz, 22, 0x301, 0, 0)
+    # ifaddrmsg struct: u8 family, u8 prefixlen, u8 flags, u8 scope, u32 index
+    ifaddrmsg = struct.pack('BBBBI', 0, 0, 0, 0, 0)
+    s = socket.socket(socket.AF_NETLINK, socket.SOCK_RAW, socket.NETLINK_ROUTE)
+    s.bind((0, 0))
+    s.sendall(nlhdr + ifaddrmsg)
+    addrs = []
+    while True:
+        pdata = s.recv(65536)
+        v = memoryview(pdata)
+        if struct.unpack('H', v[4:6])[0] == 3:  # netlink done message
+            break
+        while len(v):
+            length, typ = struct.unpack('IH', v[:6])
+            if typ == 20:
+                fam, plen, _, scope, ridx = struct.unpack('BBBBI', v[nlhdrsz:nlhdrsz+ifaddrsz])
+                if scope in (253, 0):
+                    rta = v[nlhdrsz+ifaddrsz:length]
+                    while len(rta):
+                        rtalen, rtatyp = struct.unpack('HH', rta[:4])
+                        if rtalen < 4:
+                            break
+                        if rtatyp == 1:
+                            addrs.append((fam, rta[4:rtalen], plen, ridx))
+                        rta = rta[msg_align(rtalen):]
+            v = v[msg_align(length):]
+    return addrs
+
+
+def scan_confluents():
+    srvs = {}
+    s6 = socket.socket(socket.AF_INET6, socket.SOCK_DGRAM)
+    s6.setsockopt(socket.IPPROTO_IPV6, socket.IPV6_V6ONLY, 1)
+    s6.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEPORT, 1)
+    s6.bind(('::', 1900))
+    s4 = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
+    s4.setsockopt(socket.SOL_SOCKET, socket.SO_BROADCAST, 1)
+    s4.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEPORT, 1)
+    s4.bind(('0.0.0.0', 1900))
+    doneidxs = set([])
+    msg = 'M-SEARCH * HTTP/1.1\r\nST: urn:xcat.org:service:confluent:'
+    with open('/etc/confluent/confluent.deploycfg') as dcfg:
+        for line in dcfg.read().split('\n'):
+            if line.startswith('confluent_uuid:'):
+                confluentuuid = line.split(': ')[1]
+                msg += '/confluentuuid=' + confluentuuid
+                break
+    with open('/sys/devices/virtual/dmi/id/product_uuid') as uuidin:
+        msg += '/uuid=' + uuidin.read().strip()
+    for addrf in glob.glob('/sys/class/net/*/address'):
+        with open(addrf) as addrin:
+            hwaddr = addrin.read().strip()
+            msg += '/mac=' + hwaddr
+    msg = msg.encode('utf8')
+    for addr in get_my_addresses():
+        if addr[0] == socket.AF_INET6:
+            if addr[-1] in doneidxs:
+                continue
+            try:
+                s6.setsockopt(socket.IPPROTO_IPV6, socket.IPV6_MULTICAST_IF, addr[-1])
+            except TypeError:
+                s6.setsockopt(socket.IPPROTO_IPV6, socket.IPV6_MULTICAST_IF, addr[-1].tobytes())
+            try:
+                s6.sendto(msg, ('ff02::c', 1900))
+            except OSError:
+                pass
+            doneidxs.add(addr[-1])
+        elif addr[0] == socket.AF_INET:
+            try:
+                s4.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_IF, addr[1])
+            except TypeError:
+                s4.setsockopt(socket.IPPROTO_IP, socket.IP_MULTICAST_IF, addr[1].tobytes())
+            try:
+                s4.sendto(msg, ('239.255.255.250', 1900))
+            except OSError:
+                pass
+    r = select.select((s4, s6), (), (), 4)
+    srvlist = []
+    if r:
+        r = r[0]
+    while r:
+        for s in r:
+            (rsp, peer) = s.recvfrom(9000)
+            rsp = rsp.split(b'\r\n')
+            current = None
+            for line in rsp:
+                if line.startswith(b'NODENAME: '):
+                    current = {}
+                elif line.startswith(b'DEFAULTNET: 1'):
+                    current['isdefault'] = True
+                elif line.startswith(b'MGTIFACE: '):
+                    current['mgtiface'] = line.replace(b'MGTIFACE: ', b'').strip().decode('utf8')
+            if len(peer) > 2:
+                current['myidx'] = peer[-1]
+            srvs[peer[0]] = current
+            srvlist.append(peer[0])
+        r = select.select((s4, s6), (), (), 2)
+        if r:
+            r = r[0]
+    return srvlist, srvs
+
+
+def get_net_apikey(nodename, mgr):
+    alpha = 'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789./'
+    newpass = ''.join([alpha[x >> 2] for x in bytearray(os.urandom(32))])
+    salt = '$5$' + ''.join([alpha[x >> 2] for x in bytearray(os.urandom(8))])
+    newpass = newpass.encode('utf8')
+    salt = salt.encode('utf8')
+    crypted = c_crypt(newpass, salt)
+    for addrinfo in socket.getaddrinfo(mgr, 13001, 0, socket.SOCK_STREAM):
+        try:
+            clisock = socket.socket(addrinfo[0], addrinfo[1])
+            clisock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
+            if addrinfo[0] == socket.AF_INET:
+                cliaddr = ('0.0.0.0', 302)
+            else:
+                cliaddr = ('::', 302)
+            clisock.bind(cliaddr)
+            clisock.connect(addrinfo[-1])
+            rsp = clisock.recv(8)
+            if rsp != b'\xc2\xd1-\xa8\x80\xd8j\xba':
+                raise Exception('Unrecognized credential banner')
+            hellostr = bytearray([1, len(nodename)]) + bytearray(nodename.encode('utf8')) + bytearray(b'\x00\x00')
+            clisock.send(hellostr)
+            rsp = bytearray(clisock.recv(2))
+            if not rsp:
+                continue
+            if rsp[0] == 128:
+                continue
+            if rsp[0] == 2:
+                echotoken = clisock.recv(rsp[1])
+                clisock.recv(2)  # drain \x00\x00
+                clisock.send(bytes(bytearray([3, rsp[1]])))
+                clisock.send(echotoken)
+                clisock.send(bytes(bytearray([4, len(crypted)])))
+                clisock.send(crypted)
+                clisock.send(b'\x00\x00')
+            rsp = bytearray(clisock.recv(2))
+            if rsp[0] == 5:
+                return newpass.decode('utf8')
+        finally:
+            clisock.close()
+    return ''
+
+
+def get_apikey(nodename, hosts, errout=None):
+    apikey = ""
+    if os.path.exists('/etc/confluent/confluent.apikey'):
+        apikey = open('/etc/confluent/confluent.apikey').read().strip()
+        if apikey:
+            return apikey
+    while not apikey:
+        for host in hosts:
+            try:
+                apikey = get_net_apikey(nodename, host)
+            except OSError:
+                apikey = None
+            if apikey:
+                break
+        else:
+            srvlist, _ = scan_confluents()
+            for host in srvlist:
+                try:
+                    apikey = get_net_apikey(nodename, host)
+                except OSError:
+                    apikey = None
+                if apikey:
+                    break
+        if not apikey:
+            errmsg = "Failed getting API token, check deployment.apiarmed attribute on {}\n".format(nodename)
+            sys.stderr.write(errmsg)
+            if errout:
+                errout.write(errmsg)
+            time.sleep(10)
+    with open('/etc/confluent/confluent.apikey', 'w+') as apiout:
+        apiout.write(apikey)
+    apikey = apikey.strip()
+    os.chmod('/etc/confluent/confluent.apikey', 0o600)
+    return apikey
+
+class HTTPSClient(client.HTTPConnection, object):
+    def __init__(self, usejson=False, port=443, host=None, errout=None):
+        self.errout = None
+        if errout:
+            self.errout = open(errout, 'w')
+            self.errout.flush()
+        self.stdheaders = {}
+        mgtiface = None
+        if usejson:
+            self.stdheaders['ACCEPT'] = 'application/json'
+        if host:
+            self.hosts = [host]
+            with open('/etc/confluent/confluent.info') as cinfo:
+                info = cinfo.read().split('\n')
+                for line in info:
+                    if line.startswith('NODENAME:'):
+                        node = line.split(' ')[1]
+                        self.stdheaders['CONFLUENT_NODENAME'] = node
+        else:
+            self.hosts = []
+            info = open('/etc/confluent/confluent.info').read().split('\n')
+            havedefault = '0'
+            for line in info:
+                if line.startswith('NODENAME:'):
+                    node = line.split(' ')[1]
+                    self.stdheaders['CONFLUENT_NODENAME'] = node
+                if line.startswith('MANAGER:') and not host:
+                    host = line.split(' ')[1]
+                if line.startswith('EXTMGRINFO:'):
+                    extinfo = line.split(' ')[1]
+                    extinfo = extinfo.split('|')
+                    if not mgtiface:
+                        host, mgtiface, havedefault = extinfo[:3]
+                    if havedefault == '0' and extinfo[2] == '1':
+                        host, mgtiface, havedefault = extinfo[:3]
+            if '%' in host:
+                ifidx = host.split('%', 1)[1]
+                with open('/tmp/confluent.ifidx', 'w+') as ifout:
+                    ifout.write(ifidx)
+            self.hosts.append(host)
+            try:
+                info = open('/etc/confluent/confluent.deploycfg').read().split('\n')
+            except Exception:
+                info = None
+            if info:
+                for line in info:
+                    if line.startswith('deploy_server: ') or line.startswith('deploy_server_v6: '):
+                        self.hosts.append(line.split(': ', 1)[1])
+        self.stdheaders['CONFLUENT_APIKEY'] = get_apikey(node, self.hosts, errout=self.errout)
+        if mgtiface:
+            self.stdheaders['CONFLUENT_MGTIFACE'] = mgtiface
+        self.port = port
+        self.host = None
+        self.node = node
+        host = self.check_connections()
+        client.HTTPConnection.__init__(self, host, port)
+        self.connect()
+
+
+    def set_header(self, key, val):
+        self.stdheaders[key] = val
+
+    def check_connections(self):
+        foundsrv = None
+        hosts = self.hosts
+        for timeo in (0.1, 5):
+            for host in hosts:
+                try:
+                    addrinf = socket.getaddrinfo(host, self.port)[0]
+                    psock = socket.socket(addrinf[0])
+                    psock.settimeout(timeo)
+                    psock.connect(addrinf[4])
+                    foundsrv = host
+                    psock.close()
+                    break
+                except OSError:
+                    continue
+            else:
+                continue
+            break
+        if not foundsrv:
+            srvlist, srvs = scan_confluents()
+            hosts = []
+            for srv in srvlist:
+                if srvs[srv].get('isdefault', False):
+                    hosts = [srv] + hosts
+                else:
+                    hosts = hosts + [srv]
+            for host in hosts:
+                try:
+                    addrinf = socket.getaddrinfo(host, self.port)[0]
+                    psock = socket.socket(addrinf[0])
+                    psock.settimeout(timeo)
+                    psock.connect(addrinf[4])
+                    foundsrv = host
+                    psock.close()
+                    break
+                except OSError:
+                    continue
+            else:
+                raise Exception('Unable to reach any hosts')
+        return foundsrv
+
+    def connect(self):
+        addrinf = socket.getaddrinfo(self.host, self.port)[0]
+        psock = socket.socket(addrinf[0])
+        psock.connect(addrinf[4])
+        ctx = ssl.SSLContext(ssl.PROTOCOL_SSLv23)
+        ctx.load_verify_locations('/etc/confluent/ca.pem')
+        host = self.host.split('%', 1)[0]
+        if '[' not in host and ':' in host:
+            self.stdheaders['Host'] = '[{0}]'.format(host)
+        else:
+            self.stdheaders['Host'] = '{0}'.format(host)
+        ctx.verify_mode = ssl.CERT_REQUIRED
+        ctx.check_hostname = True
+        try:
+            self.sock = ctx.wrap_socket(psock, server_hostname=host)
+        except ssl.SSLError:
+            errmsg = 'Error validating certificate on deployer (try `osdeploy initialize -t` on the deployment server {0})\n'.format(host)
+            sys.stderr.write(errmsg)
+            if self.errout:
+                self.errout.write(errmsg)
+                self.errout.flush()
+            sys.exit(1)
+
+    def grab_url(self, url, data=None, returnrsp=False):
+        return self.grab_url_with_status(url, data, returnrsp)[1]
+
+    def grab_url_with_status(self, url, data=None, returnrsp=False):
+        if data:
+            method = 'POST'
+        else:
+            method = 'GET'
+        authed = False
+        while not authed:
+            authed = True
+            self.request(method, url, data, headers=self.stdheaders)
+            rsp = self.getresponse()
+            if rsp.status >= 200 and rsp.status < 300:
+                if returnrsp:
+                    return rsp.status, rsp
+                else:
+                    return rsp.status, rsp.read()
+            if rsp.status == 401:
+                authed = False
+                rsp.read()
+                with open('/etc/confluent/confluent.apikey', 'w+') as akfile:
+                    akfile.write('')
+                self.stdheaders['CONFLUENT_APIKEY'] = get_apikey(
+                    self.node, [self.host], errout=self.errout)
+        raise Exception(rsp.read())
+
+if __name__ == '__main__':
+    data = None
+    usejson = False
+    if '-j' in sys.argv:
+        usejson = True
+    if len(sys.argv) == 1:
+        HTTPSClient()
+        sys.exit(0)
+    try:
+        outbin = sys.argv.index('-o')
+        sys.argv.pop(outbin)
+        outbin = sys.argv.pop(outbin)
+    except ValueError:
+        outbin = None
+    try:
+        waitfor = sys.argv.index('-w')
+        sys.argv.pop(waitfor)
+        waitfor = int(sys.argv.pop(waitfor))
+    except ValueError:
+        waitfor = None
+    try:
+        data = sys.argv.index('-d')
+        sys.argv.pop(data)
+        data = sys.argv.pop(data)
+    except ValueError:
+        data = None
+    try:
+        errout = sys.argv.index('-e')
+        sys.argv.pop(errout)
+        errout = sys.argv.pop(errout)
+    except ValueError:
+        errout = None
+    if len(sys.argv) > 2 and os.path.exists(sys.argv[-1]):
+        data = open(sys.argv[-1]).read()
+    if outbin:
+        with open(outbin, 'ab+') as outf:
+            reader = HTTPSClient(usejson=usejson, errout=errout).grab_url(
+                sys.argv[1], data, returnrsp=True)
+            chunk = reader.read(16384)
+            while chunk:
+                outf.write(chunk)
+                chunk = reader.read(16384)
+        sys.exit(0)
+    if waitfor:
+        client = HTTPSClient(usejson, errout=errout)
+        status = 201
+        while status != waitfor:
+            status, rsp = client.grab_url_with_status(sys.argv[1], data)
+            sys.stdout.write(rsp.decode())
+    else:
+        sys.stdout.write(HTTPSClient(usejson, errout=errout).grab_url(sys.argv[1], data).decode())

confluent_osdeploy/common/opt/confluent/bin/apiclient

@@ -1,107 +0,0 @@
-#!/usr/bin/python
-try:
-    import http.client as client
-except ImportError:
-    import httplib as client
-import os
-import socket
-import subprocess
-import ssl
-import sys
-
-def get_apikey(nodename, mgr):
-    if os.path.exists('/etc/confluent/confluent.apikey'):
-        return open('/etc/confluent/confluent.apikey').read().strip()
-    apikey = subprocess.check_output(['/opt/confluent/bin/clortho', nodename, mgr])
-    if not isinstance(apikey, str):
-        apikey = apikey.decode('utf8')
-    with open('/etc/confluent/confluent.apikey', 'w+') as apiout:
-        apiout.write(apikey)
-    apikey = apikey.strip()
-    os.chmod('/etc/confluent/confluent.apikey', 0o600)
-    return apikey
-
-class HTTPSClient(client.HTTPConnection, object):
-    def __init__(self, json=False, port=443):
-        self.stdheaders = {}
-        info = open('/etc/confluent/confluent.info').read().split('\n')
-        host = None
-        mgtiface = None
-        havedefault = '0'
-        for line in info:
-            if line.startswith('NODENAME:'):
-                node = line.split(' ')[1]
-                self.stdheaders['CONFLUENT_NODENAME'] = node
-            if line.startswith('MANAGER:') and not host:
-                host = line.split(' ')[1]
-            if line.startswith('EXTMGRINFO:'):
-                extinfo = line.split(' ')[1]
-                extinfo = extinfo.split('|')
-                if not mgtiface:
-                    host, mgtiface, havedefault = extinfo[:3]
-                if havedefault == '0' and extinfo[2] == '1':
-                    host, mgtiface, havedefault = extinfo[:3]
-        if '%' in host:
-            ifidx = host.split('%', 1)[1]
-            with open('/tmp/confluent.ifidx', 'w+') as ifout:
-                ifout.write(ifidx)
-        if json:
-            self.stdheaders['ACCEPT'] = 'application/json'
-        self.stdheaders['CONFLUENT_APIKEY'] = get_apikey(node, host)
-        if mgtiface:
-            self.stdheaders['CONFLUENT_MGTIFACE'] = mgtiface
-        client.HTTPConnection.__init__(self, host, port)
-        self.connect()
-
-    def set_header(self, key, val):
-        self.stdheaders[key] = val
-
-    def connect(self):
-        addrinf = socket.getaddrinfo(self.host, self.port)[0]
-        psock = socket.socket(addrinf[0])
-        psock.connect(addrinf[4])
-        ctx = ssl.SSLContext(ssl.PROTOCOL_SSLv23)
-        ctx.load_verify_locations('/etc/confluent/ca.pem')
-        host = self.host.split('%', 1)[0]
-        if '[' not in host and ':' in host:
-            self.stdheaders['Host'] = '[{0}]'.format(host)
-        else:
-            self.stdheaders['Host'] = '{0}'.format(host)
-        ctx.verify_mode = ssl.CERT_REQUIRED
-        ctx.check_hostname = True
-        self.sock = ctx.wrap_socket(psock, server_hostname=host)
-
-    def grab_url(self, url, data=None, returnrsp=False):
-        if data:
-            method = 'POST'
-        else:
-            method = 'GET'
-        self.request(method, url, data, headers=self.stdheaders)
-        rsp = self.getresponse()
-        if rsp.status >= 200 and rsp.status < 300:
-            if returnrsp:
-                return rsp
-            else:
-                return rsp.read()
-        raise Exception(rsp.read())
-
-if __name__ == '__main__':
-    data = None
-    json = False
-    if '-j' in sys.argv:
-        json = True
-    if len(sys.argv) == 1:
-        HTTPSClient()
-        sys.exit(0)
-    if sys.argv[-2] == '-o':
-        with open(sys.argv[3], 'wb') as outf:
-            reader = HTTPSClient(json=json).grab_url(
-                sys.argv[1], data, returnrsp=True)
-            chunk = reader.read(16384)
-            while chunk:
-                outf.write(chunk)
-                chunk = reader.read(16384)
-        sys.exit(0)
-    if os.path.exists(sys.argv[-1]):
-        data = open(sys.argv[-1]).read()
-    print(HTTPSClient(json=json).grab_url(sys.argv[1], data).decode())

confluent_osdeploy/common/profile/scripts/confignet

@@ -0,0 +1,351 @@
+#!/usr/bin/python
+
+import glob
+import json
+import os
+import socket
+import sys
+import time
+import shlex
+import subprocess
+try:
+    from importlib.machinery import SourceFileLoader
+    def load_source(mod, path):
+        return SourceFileLoader(mod, path).load_module()
+except ImportError:
+    from imp import load_source
+
+try:
+    apiclient = load_source('apiclient', '/opt/confluent/bin/apiclient')
+except IOError:
+    apiclient = load_source('apiclient', '/etc/confluent/apiclient')
+
+def add_lla(iface, mac):
+    pieces = mac.split(':')
+    initbyte = int(pieces[0], 16) ^ 2
+    lla = 'fe80::{0:x}{1}:{2}ff:fe{3}:{4}{5}/64'.format(initbyte, pieces[1], pieces[2], pieces[3], pieces[4], pieces[5])
+    try:
+        subprocess.check_call(['ip', 'addr', 'add', 'dev', iface, lla, 'scope', 'link'])
+    except Exception:
+        return None
+    return lla
+
+#cli = apiclient.HTTPSClient(json=True)
+#c = cli.grab_url_with_status('/confluent-api/self/netcfg')
+def add_missing_llas():
+    #NetworkManager goes out of its way to suppress ipv6 lla, so will just add some
+    added = {}
+    linkinfo = subprocess.check_output(['ip', '-br', 'l']).decode('utf8')
+    ifaces = {}
+    for line in linkinfo.split('\n'):
+        line = line.strip().split()
+        if not line or 'LOOPBACK' in line[-1] or 'NO-CARRIER' in line[-1]:
+            continue
+        if 'UP' not in line[-1]:
+            subprocess.call(['ip', 'link', 'set', line[0], 'up'])
+        ifaces[line[0]] = line[2]
+    ips = {}
+    ipinfo = subprocess.check_output(['ip', '-br', '-6', 'a']).decode('utf8')
+    for line in ipinfo.split('\n'):
+        line = line.strip().split(None, 2)
+        if not line:
+            continue
+        ips[line[0]] = line[2]
+    for iface in ifaces:
+        for addr in ips.get(iface, '').split():
+            if addr.startswith('fe80::'):
+                break
+        else:
+            newlla = add_lla(iface, ifaces[iface])
+            if newlla:
+                added[iface] = newlla
+    return added
+
+def rm_tmp_llas(tmpllas):
+    for iface in tmpllas:
+        subprocess.check_call(['ip', 'addr', 'del', 'dev', iface, tmpllas[iface]])
+
+def await_tentative():
+    maxwait = 10
+    while b'tentative' in subprocess.check_output(['ip', 'a']):
+        if maxwait == 0:
+            break
+        maxwait -= 1
+        time.sleep(1)
+
+def map_idx_to_name():
+    map = {}
+    devtype = {}
+    prevdev = None
+    for line in subprocess.check_output(['ip', 'l']).decode('utf8').splitlines():
+        if line.startswith(' ') and 'link/' in line:
+            typ = line.split()[0].split('/')[1]
+            devtype[prevdev] = typ if type != 'ether' else 'ethernet'
+        if line.startswith(' '):
+            continue
+        idx, iface, rst = line.split(':', 2)
+        prevdev = iface.strip()
+        rst = rst.split()
+        try:
+            midx = rst.index('master')
+            continue
+        except ValueError:
+            pass
+        idx = int(idx)
+        iface = iface.strip()
+        map[idx] = iface
+    return map, devtype
+
+
+def get_interface_name(iname, settings):
+    explicitname = settings.get('interface_names', None)
+    if explicitname:
+        return explicitname
+    if settings.get('current_nic', False):
+        return iname
+    return None
+
+class WickedManager(object):
+    def __init__(self):
+        self.teamidx = 0
+        self.read_connections()
+
+    def read_connections(self):
+        self.cfgbydev = {}
+        for ifcfg in glob.glob('/etc/sysconfig/network/ifcfg-*'):
+            devname = ifcfg.replace('/etc/sysconfig/network/ifcfg-', '')
+            if devname == 'lo':
+                continue
+            currcfg = {}
+            self.cfgbydev[devname] = currcfg
+            for cfg in open(ifcfg).read().splitlines():
+                cfg = cfg.split('#', 1)[0]
+                kv = ' '.join(shlex.split(cfg)).split('=', 1)
+                if len(kv) != 2:
+                    continue
+                k, v = kv
+                k = k.strip()
+                v = v.strip()
+                currcfg[k] = v
+
+    def apply_configuration(self, cfg):
+        stgs = cfg['settings']
+        ipcfg = 'STARTMODE=auto\n'
+        routecfg = ''
+        bootproto4 = stgs.get('ipv4_method', 'none')
+        bootproto6 = stgs.get('ipv6_method', 'none')
+        if bootproto4 == 'dhcp' and bootproto6 == 'dhcp':
+            ipcfg += 'BOOTPROTO=dhcp\n'
+        elif bootproto4 == 'dhcp':
+            ipcfg += 'BOOTPROTO=dhcp4\n'
+        elif bootproto6 == 'dhcp':
+            ipcfg += 'BOOTPROTO=dhcp6\n'
+        else:
+            ipcfg += 'BOOTPROTO=static\n'
+        if stgs.get('ipv4_address', None):
+            ipcfg += 'IPADDR=' + stgs['ipv4_address'] + '\n'
+        v4gw = stgs.get('ipv4_gateway', None)
+        if stgs.get('ipv6_address', None):
+            ipcfg += 'IPADDR_V6=' + stgs['ipv6_address'] + '\n'
+        v6gw = stgs.get('ipv6_gateway', None)
+        cname = None
+        if len(cfg['interfaces']) > 1:  # creating new team
+            if not stgs.get('team_mode', None):
+                sys.stderr.write("Warning, multiple interfaces ({0}) without a team_mode, skipping setup\n".format(','.join(cfg['interfaces'])))
+                return
+            if not stgs.get('connection_name', None):
+                stgs['connection_name'] = 'team{0}'.format(self.teamidx)
+                self.teamidx += 1
+            cname = stgs['connection_name']
+            with open('/etc/sysconfig/network/ifcfg-{0}'.format(cname), 'w') as teamout:
+                teamout.write(ipcfg)
+                teamout.write('TEAM_RUNNER={0}\n'.format(stgs['team_mode']))
+                idx = 1
+                for iface in cfg['interfaces']:
+                    subprocess.call(['wicked', 'ifdown', iface])
+                    try:
+                        os.remove('/etc/sysconfig/network/ifcfg-{0}'.format(iface))
+                        os.remove('/etc/sysconfig/network/ifroute-{0}'.format(iface))
+                    except OSError:
+                        pass
+                    teamout.write('TEAM_PORT_DEVICE_{0}={1}\n'.format(idx, iface))
+                    idx += 1
+        else:
+            cname = list(cfg['interfaces'])[0]
+            priorcfg = self.cfgbydev.get(cname, {})
+            for cf in priorcfg:
+                if cf.startswith('TEAM_'):
+                    ipcfg += '{0}={1}\n'.format(cf, priorcfg[cf])
+            with open('/etc/sysconfig/network/ifcfg-{0}'.format(cname), 'w') as iout:
+                iout.write(ipcfg)
+        if v4gw:
+            routecfg += 'default {0} - {1}\n'.format(v4gw, cname)
+        if v6gw:
+            routecfg += 'default {0} - {1}\n'.format(v6gw, cname)
+        if routecfg:
+            with open('/etc/sysconfig/network/ifroute-{0}'.format(cname), 'w') as routeout:
+                routeout.write(routecfg)
+        subprocess.call(['wicked', 'ifup', cname])
+
+
+class NetworkManager(object):
+    def __init__(self, devtypes):
+        self.connections = {}
+        self.uuidbyname = {}
+        self.uuidbydev = {}
+        self.connectiondetail = {}
+        self.read_connections()
+        self.teamidx = 0
+        self.devtypes = devtypes
+
+    def read_connections(self):
+        self.connections = {}
+        self.uuidbyname = {}
+        self.uuidbydev = {}
+        self.connectiondetail = {}
+        ci = subprocess.check_output(['nmcli', '-t', 'c']).decode('utf8')
+        for inf in ci.splitlines():
+            n, u, t, dev = inf.split(':')
+            if n == 'NAME':
+                continue
+            if dev == '--':
+                dev = None
+            self.uuidbyname[n] = u
+            if dev:
+                self.uuidbydev[dev] = u
+            self.connections[u] = {'name': n, 'uuid': u, 'type': t, 'dev': dev}
+            deats = {}
+            for deat in subprocess.check_output(['nmcli', 'c', 's', u]).decode('utf8').splitlines():
+                k, v = deat.split(':', 1)
+                v = v.strip()
+                if v == '--':
+                    continue
+                if '(default)' in v:
+                    continue
+                deats[k] = v
+            self.connectiondetail[u] = deats
+
+
+    def add_team_member(self, team, member):
+        bondcfg = {}
+        if member in self.uuidbydev:
+            myuuid = self.uuidbydev[member]
+            deats = self.connectiondetail[myuuid]
+            currteam = deats.get('connection.master', None)
+            if currteam == team:
+                return
+            for stg in ('ipv4.dhcp-hostname', 'ipv4.dns', 'ipv6.dns', 'ipv6.dhcp-hostname'):
+                if deats.get(stg, None):
+                    bondcfg[stg] = deats[stg]
+        if member in self.uuidbyname:
+            subprocess.check_call(['nmcli', 'c', 'del', self.uuidbyname[member]])
+        subprocess.check_call(['nmcli', 'c', 'add', 'type', 'team-slave', 'master', team, 'con-name', member, 'connection.interface-name', member])
+        if bondcfg:
+            args = []
+            for parm in bondcfg:
+                args.append(parm)
+                args.append(bondcfg[parm])
+            subprocess.check_call(['nmcli', 'c', 'm', team] + args)
+
+    def apply_configuration(self, cfg):
+        cmdargs = {}
+        stgs = cfg['settings']
+        cmdargs['ipv6.method'] = stgs.get('ipv6_method', 'link-local')
+        if stgs.get('ipv6_address', None):
+            cmdargs['ipv6.addresses'] = stgs['ipv6_address']
+        cmdargs['ipv4.method'] = stgs.get('ipv4_method', 'disabled')
+        if stgs.get('ipv4_address', None):
+            cmdargs['ipv4.addresses'] = stgs['ipv4_address']
+        if stgs.get('ipv4_gateway', None):
+            cmdargs['ipv4.gateway'] = stgs['ipv4_gateway']
+        if stgs.get('ipv6_gateway', None):
+            cmdargs['ipv6.gateway'] = stgs['ipv6_gateway']
+        if len(cfg['interfaces']) > 1:  # team time.. should be..
+            if not cfg['settings'].get('team_mode', None):
+                sys.stderr.write("Warning, multiple interfaces ({0}) without a team_mode, skipping setup\n".format(','.join(cfg['interfaces'])))
+                return
+            if not cfg['settings'].get('connection_name', None):
+                cfg['settings']['connection_name'] = 'team{0}'.format(self.teamidx)
+                self.teamidx += 1
+            cname = cfg['settings']['connection_name']
+            cargs = []
+            for arg in cmdargs:
+                cargs.append(arg)
+                cargs.append(cmdargs[arg])
+            subprocess.check_call(['nmcli', 'c', 'add', 'type', 'team', 'con-name', cname, 'connection.interface-name', cname, 'team.runner', stgs['team_mode']] + cargs)
+            for iface in cfg['interfaces']:
+                self.add_team_member(cname, iface)
+            subprocess.check_call(['nmcli', 'c', 'u', cname])
+        else:
+            cname = stgs.get('connection_name', None)
+            iname = list(cfg['interfaces'])[0]
+            if not cname:
+                cname = iname
+            u = self.uuidbyname.get(cname, None)
+            cargs = []
+            for arg in cmdargs:
+                cargs.append(arg)
+                cargs.append(cmdargs[arg])
+            if u:
+                cmdargs['connection.interface-name'] = iname
+                subprocess.check_call(['nmcli', 'c', 'm', u] + cargs)
+                subprocess.check_call(['nmcli', 'c', 'u', u])
+            else:
+                subprocess.check_call(['nmcli', 'c', 'add', 'type', self.devtypes[iname], 'con-name', cname, 'connection.interface-name', iname] + cargs)
+
+
+
+if __name__ == '__main__':
+    havefirewall = subprocess.call(['systemctl', 'status', 'firewalld'])
+    havefirewall = havefirewall == 0
+    if havefirewall:
+        subprocess.check_call(['systemctl', 'stop', 'firewalld'])
+    tmpllas = add_missing_llas()
+    await_tentative()
+    idxmap, devtypes = map_idx_to_name()
+    netname_to_interfaces = {}
+    myaddrs = apiclient.get_my_addresses()
+    srvs, _ = apiclient.scan_confluents()
+    doneidxs = set([])
+    for srv in srvs:
+        s = socket.create_connection((srv, 443))
+        myname = s.getsockname()
+        s.close()
+        if len(myname) == 4:
+            curridx = myname[-1]
+        else:
+            myname = myname[0]
+            myname = socket.inet_pton(socket.AF_INET, myname)
+            for addr in myaddrs:
+                if myname == addr[1].tobytes():
+                    curridx = addr[-1]
+        if curridx in doneidxs:
+            continue
+        status, nc = apiclient.HTTPSClient(usejson=True, host=srv).grab_url_with_status('/confluent-api/self/netcfg')
+        nc = json.loads(nc)
+        iname = get_interface_name(idxmap[curridx], nc.get('default', {}))
+        if iname:
+            if 'default' in netname_to_interfaces:
+                netname_to_interfaces['default']['interfaces'].add(iname)
+            else:
+                netname_to_interfaces['default'] = {'interfaces': set([iname]), 'settings': nc['default']}
+        for netname in nc.get('extranets', {}):
+            uname = '_' + netname
+            iname = get_interface_name(idxmap[curridx], nc['extranets'][netname])
+            if iname:
+                if uname in netname_to_interfaces:
+                    netname_to_interfaces[uname]['interfaces'].add(iname)
+                else:
+                    netname_to_interfaces[uname] = {'interfaces': set([iname]), 'settings': nc['extranets'][netname]}
+        doneidxs.add(curridx)
+    rm_tmp_llas(tmpllas)
+    if os.path.exists('/usr/bin/nmcli'):
+        nm = NetworkManager(devtypes)
+    elif os.path.exists('/usr/sbin/wicked'):
+        nm = WickedManager()
+    for netn in netname_to_interfaces:
+        nm.apply_configuration(netname_to_interfaces[netn])
+    if havefirewall:
+        subprocess.check_call(['systemctl', 'start', 'firewalld'])
+    await_tentative()
+

confluent_osdeploy/confluent_osdeploy.spec.tmpl

@@ -4,8 +4,9 @@ Release: 1
 Summary: OS Deployment support for confluent
 
 License: Apache2
-URL: http://hpc.lenovo.com/
+URL: https://hpc.lenovo.com/
 Source0: confluent_osdeploy.tar.xz
+Source1: confluent_el9bin.tar.xz
 BuildArch: noarch
 Requires: confluent_ipxe mtools tar
 BuildRoot: /tmp
@@ -17,20 +18,47 @@ This contains support utilities for enabling deployment of x86_64 architecture s
 %define debug_package %{nil}
 
 %prep
-%setup -n confluent_osdeploy
+%setup -n confluent_osdeploy -a 1
 
 %build
 mkdir -p opt/confluent/bin
+mkdir -p stateless-bin
 cd utils
 make all
-cp copernicus clortho autocons ../opt/confluent/bin
+cp confluent_imginfo copernicus clortho autocons ../opt/confluent/bin
+cp start_root urlmount ../stateless-bin/
 cd ..
-for os in rhvh4 el7 genesis el8 suse15 ubuntu20.04; do
+ln -s el8 el9
+ln -s el8-diskless el9-diskless
+for os in rhvh4 el7 genesis el8 suse15 ubuntu20.04 coreos el9; do
     mkdir ${os}out
     cd ${os}out
-    cp -a ../opt .
+    if [ -d ../${os}bin ]; then 
+        cp -a ../${os}bin/opt .
+    else
+        cp -a ../opt .
+    fi
     cp -a ../${os}/initramfs/* .
-    cp -a ../common/* .
+    cp -a ../common/initramfs/* .
+    find . | cpio -H newc -o > ../addons.cpio
+    mv ../addons.cpio .
+    cd ..
+done
+for os in el7 el8 suse15 el9 ubuntu20.04; do
+    mkdir ${os}disklessout
+    cd ${os}disklessout
+    if [ -d ../${os}bin ]; then
+        cp -a ../${os}bin/opt .
+    else
+        cp -a ../opt .
+    fi
+    cp -a ../${os}-diskless/initramfs/* .
+    cp -a ../common/initramfs/* .
+    if [ -d ../${os}bin ]; then 
+        cp -a ../${os}bin/stateless-bin/* opt/confluent/bin
+    else
+        cp -a ../stateless-bin/* opt/confluent/bin
+    fi
     find . | cpio -H newc -o > ../addons.cpio
     mv ../addons.cpio .
     cd ..
@@ -39,7 +67,7 @@ mkdir esxi7out
 cd esxi7out
 cp -a ../opt .
 cp -a ../esxi7/initramfs/* .
-cp -a ../common/* .
+cp -a ../common/initramfs/* .
 chmod +x bin/* opt/confluent/bin/*
 tar zcvf ../addons.tgz *
 mv ../addons.tgz .
@@ -48,12 +76,25 @@ cp -a esxi7out esxi6out
 cp -a esxi7 esxi6
 
 %install
-for os in rhvh4 el7 el8 genesis suse15 ubuntu20.04 esxi6 esxi7; do
+for os in rhvh4 el7 el8 el9 genesis suse15 ubuntu20.04 esxi6 esxi7 coreos; do
     mkdir -p %{buildroot}/opt/confluent/lib/osdeploy/$os/initramfs
     mkdir -p %{buildroot}/opt/confluent/lib/osdeploy/$os/profiles
     cp ${os}out/addons.* %{buildroot}/opt/confluent/lib/osdeploy/$os/initramfs
     cp -a $os/profiles/* %{buildroot}/opt/confluent/lib/osdeploy/$os/profiles
+    for targ in %{buildroot}/opt/confluent/lib/osdeploy/$os/profiles/*; do
+        cp -a common/profile/* $targ
+    done
+    if [ -d ${os}disklessout ]; then
+        mkdir -p %{buildroot}/opt/confluent/lib/osdeploy/${os}-diskless/initramfs
+        mkdir -p %{buildroot}/opt/confluent/lib/osdeploy/${os}-diskless/profiles
+        cp ${os}disklessout/addons.* %{buildroot}/opt/confluent/lib/osdeploy/${os}-diskless/initramfs
+        cp -a ${os}-diskless/profiles/* %{buildroot}/opt/confluent/lib/osdeploy/$os-diskless/profiles
+        for targ in %{buildroot}/opt/confluent/lib/osdeploy/$os-diskless/profiles/*; do
+            cp -a common/profile/* $targ
+        done
+    fi
 done
+find %{buildroot}/opt/confluent/lib/osdeploy/ -name .gitignore -exec rm -f {} +
 
 %files
 /opt/confluent/lib/osdeploy

confluent_osdeploy/coreos/initramfs/etc/systemd/system/initrd-root-fs.target.requires/confluent-rootfs.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/confluent-rootfs.service

confluent_osdeploy/coreos/initramfs/opt/confluent/bin/initconfluent.sh

@@ -0,0 +1,122 @@
+#!/bin/bash
+TRIES=0
+oum=$(umask)
+umask 0077
+mkdir -p /etc/confluent
+echo -n > /etc/confluent/confluent.info
+umask $oum
+cd /sys/class/net
+echo "Searching for confluent deployment server...." > /dev/console
+while ! grep ^NODE /etc/confluent/confluent.info; do
+    while ! grep ^EXTMGRINFO: /etc/confluent/confluent.info | awk -F'|' '{print $3}' | grep 1 >& /dev/null && [ "$TRIES" -lt 60 ]; do
+        TRIES=$((TRIES + 1))
+        for currif in *; do
+            ip link set $currif up
+        done
+        /opt/confluent/bin/copernicus -t > /etc/confluent/confluent.info
+    done
+    if ! grep ^NODE /etc/confluent/confluent.info; then
+        echo 'Current net config:' > /dev/console
+        ip -br a > /dev/console
+    fi
+done
+echo "Found confluent deployment services on local network" > /dev/console
+cd /
+echo -n "" > /tmp/confluent.initq
+# restart cmdline
+echo -n "" > /etc/cmdline.d/01-confluent.conf
+nodename=$(grep ^NODENAME /etc/confluent/confluent.info|awk '{print $2}')
+cat /tls/*.pem > /etc/confluent/ca.pem
+confluent_mgr=$(grep ^MANAGER: /etc/confluent/confluent.info|head -n 1 | awk '{print $2}')
+echo "Connecting to confluent server: $confluent_mgr" > /dev/console
+if [[ $confluent_mgr == *%* ]]; then
+    echo $confluent_mgr | awk -F% '{print $2}' > /tmp/confluent.ifidx
+    ifidx=$(cat /tmp/confluent.ifidx)
+    ifname=$(ip link |grep ^$ifidx:|awk '{print $2}')
+    ifname=${ifname%:}
+fi
+needseal=1
+oldumask=$(umask)
+umask 0077
+while [ -z "$confluent_apikey" ]; do
+    /opt/confluent/bin/clortho $nodename $confluent_mgr > /etc/confluent/confluent.apikey
+    if grep ^SEALED: /etc/confluent/confluent.apikey > /dev/null; then
+        needseal=0
+        sed -e s/^SEALED:// /etc/confluent/confluent.apikey | clevis-decrypt-tpm2 > /etc/confluent/confluent.apikey.decrypt
+        mv /etc/confluent/confluent.apikey.decrypt /etc/confluent/confluent.apikey
+    fi
+    confluent_apikey=$(cat /etc/confluent/confluent.apikey)
+    if [ -z "$confluent_apikey" ]; then
+        echo "Unable to acquire node api key, no TPM2 sealed nor fresh token available, retrying..." > /dev/console
+        sleep 10
+    fi
+done
+if [[ $confluent_mgr == *:* ]]; then
+    confluent_mgr="[$confluent_mgr]"
+fi
+if [ $needseal == 1 ]; then
+    sealed=$(echo $confluent_apikey | clevis-encrypt-tpm2 {})
+    if [ ! -z "$sealed" ]; then
+        curl -sf -H "CONFLUENT_NODENAME: $nodename" -H "CONFLUENT_APIKEY: $confluent_apikey" -d $sealed https://$confluent_mgr/confluent-api/self/saveapikey
+    fi
+fi
+curl -sf -H "CONFLUENT_NODENAME: $nodename" -H "CONFLUENT_APIKEY: $confluent_apikey" https://$confluent_mgr/confluent-api/self/deploycfg > /etc/confluent/confluent.deploycfg
+curl -sf -H "CONFLUENT_NODENAME: $nodename" -H "CONFLUENT_APIKEY: $confluent_apikey" https://$confluent_mgr/confluent-api/self/profileprivate/pending/config.ign > /config.ign
+[ -s /config.ign ] || rm /config.ign
+
+umask $oldumask
+autoconfigmethod=$(grep ipv4_method /etc/confluent/confluent.deploycfg)
+autoconfigmethod=${autoconfigmethod#ipv4_method: }
+confluent_profile=$(grep ^profile: /etc/confluent/confluent.deploycfg)
+confluent_profile=${confluent_profile#profile: }
+
+if [ "$autoconfigmethod" = "dhcp" ]; then
+    echo ip=$ifname:dhcp >>  /etc/cmdline.d/01-confluent.conf
+else
+    v4addr=$(grep ^ipv4_address: /etc/confluent/confluent.deploycfg)
+    v4addr=${v4addr#ipv4_address: }
+    v4gw=$(grep ^ipv4_gateway: /etc/confluent/confluent.deploycfg)
+    v4gw=${v4gw#ipv4_gateway: }
+    if [ "$v4gw" = "null" ]; then
+        v4gw=""
+    fi
+    v4nm=$(grep ipv4_netmask: /etc/confluent/confluent.deploycfg)
+    v4nm=${v4nm#ipv4_netmask: }
+    echo ip=$v4addr::$v4gw:$v4nm:$hostname:$ifname:none >> /etc/cmdline.d/01-confluent.conf
+fi
+nameserversec=0
+while read -r entry; do
+    if [ $nameserversec = 1 ]; then
+        if [[ $entry == "-"* ]] && [[ $entry != "- ''" ]]; then
+            echo nameserver=${entry#- } >> /etc/cmdline.d/01-confluent.conf
+            continue
+        fi
+    fi
+    nameserversec=0
+    if [ "${entry%:*}" = "nameservers" ]; then
+        nameserversec=1
+        continue
+    fi
+done < /etc/confluent/confluent.deploycfg
+
+if [ -e /lib/nm-lib.sh ]; then
+    . /lib/nm-lib.sh
+    nm_generate_connections
+    sed -i 's/method=disabled/method=link-local/' /run/NetworkManager/system-connections/*.nmconnection
+   if [ -f /run/NetworkManager/system-connections/$ifname.nmconnection ]; then
+        rm /run/NetworkManager/system-connections/default_connection.nmconnection
+    fi
+    if [[ "$ifname" == ib* ]]; then
+        sed -i s/type=ethernet/type=infiniband/ /run/NetworkManager/system-connections/$ifname.nmconnection
+        if ! grep '\[infiniband\]' /run/NetworkManager/system-connections/$ifname.nmconnection > /dev/null; then
+            echo >> /run/NetworkManager/system-connections/$ifname.nmconnection
+            echo '[infiniband]' >> /run/NetworkManager/system-connections/$ifname.nmconnection
+            echo transport-mode=datagram >> /run/NetworkManager/system-connections/$ifname.nmconnection
+        fi
+    fi
+fi
+#cat /proc/cmdline /etc/cmdline.d/01-confluent.conf | tr '\n' ' ' > /run/fakecmdline
+#chcon system_u:object_r:proc_t:s0 /run/fakecmdline
+#mount -o bind /run/fakecmdline /proc/cmdline
+
+curl -sf https://$confluent_mgr/confluent-public/os/$confluent_profile/rootfs.img | rdcore stream-hash /etc/coreos-live-want-rootfs | bsdtar -xf - -C /

confluent_osdeploy/coreos/initramfs/usr/lib/dracut/hooks/cmdline/01-confluent.sh

@@ -0,0 +1,10 @@
+cat /tls/*.0 >> /etc/pki/tls/certs/ca-bundle.crt
+if ! grep console= /proc/cmdline >& /dev/null; then
+    autocons=$(/opt/confluent/bin/autocons)
+    if [ -n "$autocons" ]; then
+        echo console=$autocons |sed -e 's!/dev/!!' >> /tmp/01-autocons.conf
+        autocons=${autocons%,*}
+	echo $autocons > /tmp/01-autocons.devnode
+	echo "Detected firmware specified console at $(cat /tmp/01-autocons.conf)" > $autocons
+    fi
+fi

confluent_osdeploy/coreos/initramfs/usr/lib/dracut/hooks/pre-pivot/01-confluent.sh

@@ -0,0 +1,93 @@
+#!/bin/sh
+
+nodename=$(grep ^NODENAME: /etc/confluent/confluent.info | awk '{print $2}')
+confluent_mgr=$(grep ^MANAGER: /etc/confluent/confluent.info| head -n 1| awk '{print $2}' | sed -e s/%/%25/)
+if [[ $confluent_mgr = *:* ]]; then
+    confluent_mgr=[$confluent_mgr]
+fi
+
+mkdir -p /sysroot/var/home/core/.ssh/
+chmod 700 /sysroot/var/home/core/.ssh
+cat /ssh/*.rootpubkey >> /sysroot/var/home/core/.ssh/authorized_keys
+chmod 600 /sysroot/var/home/core/.ssh/authorized_keys
+cp -a /etc/confluent /sysroot/etc/confluent
+mkdir -p /sysroot/opt/confluent/bin/
+cat > /sysroot/opt/confluent/bin/setssh.sh << 'EOF'
+#!/bin/sh
+nodename=$(grep ^NODENAME: /etc/confluent/confluent.info | awk '{print $2}')
+confluent_mgr=$(grep ^MANAGER: /etc/confluent/confluent.info| head -n 1| awk '{print $2}' | sed -e s/%/%25/)
+if [[ $confluent_mgr = *:* ]]; then
+    confluent_mgr=[$confluent_mgr]
+fi
+
+for i in  /etc/ssh/ssh_host*key.pub; do
+    certname=${i/.pub/-cert.pub}
+    curl --cacert /etc/confluent/ca.pem -sf -X POST -H "CONFLUENT_NODENAME: $nodename" -H "CONFLUENT_APIKEY: $(cat /etc/confluent/confluent.apikey)" -d @$i https://$confluent_mgr/confluent-api/self/sshcert > $certname
+    if ! grep HostKey ${i%.pub} /etc/ssh/sshd_config > /dev/null; then
+        echo HostKey ${i%.pub} >> /etc/ssh/sshd_config
+    fi
+    if ! grep HostCertificate $certname /etc/ssh/sshd_config > /dev/null; then
+        echo HostCertificate $certname >> /etc/ssh/sshd_config
+    fi
+done
+EOF
+
+chmod 755 /sysroot/opt/confluent/bin/setssh.sh
+chcon system_u:object_r:bin_t:s0 /sysroot/opt/confluent/bin/setssh.sh
+
+
+cat > /sysroot/etc/systemd/system/confluent-ssh.service << EOF
+[Service]
+Type=oneshot
+ExecStart=/opt/confluent/bin/setssh.sh
+
+[Unit]
+PartOf=sshd.service
+Before=sshd.service
+After=sshd-keygen.target
+Wants=sshd-keygen.target
+Requires=network-online.target
+After=network-online.target
+
+
+[Install]
+WantedBy=sshd.service
+EOF
+
+mkdir -p /sysroot/etc/systemd/system/sshd.service.wants
+ln -s /etc/systemd/system/confluent-ssh.service /sysroot/etc/systemd/system/sshd.service.wants/
+ln -s /etc/systemd/system/confluent-onboot.service /sysroot/etc/systemd/system/multi-user.target.wants/
+
+
+cat > /sysroot/opt/confluent/bin/onboot.sh << 'EOF'
+#!/bin/sh
+confluent_profile=$(grep ^profile: /etc/confluent/confluent.deploycfg |awk '{print $2}')
+nodename=$(grep ^NODENAME: /etc/confluent/confluent.info | awk '{print $2}')
+confluent_mgr=$(grep ^MANAGER: /etc/confluent/confluent.info| head -n 1| awk '{print $2}' | sed -e s/%/%25/)
+if [[ $confluent_mgr = *:* ]]; then
+    confluent_mgr=[$confluent_mgr]
+fi
+
+curl -sf https://$confluent_mgr/confluent-public/os/${confluent_profile}/scripts/onboot.sh > /tmp/onboot.sh
+[ -s /tmp/onboot.sh ] && . /tmp/onboot.sh
+exit 0
+EOF
+chmod 755 /sysroot/opt/confluent/bin/onboot.sh
+chcon system_u:object_r:bin_t:s0 /sysroot/opt/confluent/bin/onboot.sh
+
+
+cat > /sysroot/etc/systemd/system/confluent-onboot.service << EOF
+[Service]
+Type=oneshot
+ExecStart=/opt/confluent/bin/onboot.sh
+
+[Unit]
+Requires=sshd.service
+After=sshd.service
+Requires=network-online.target
+After=network-online.target
+EOF
+chcon -h system_u:object_r:systemd_unit_file_t:s0 /sysroot/etc/systemd/system/confluent-ssh.service /sysroot/etc/systemd/system/sshd.service.wants/confluent-ssh.service /sysroot/etc/systemd/system/confluent-onboot.service /sysroot/etc/systemd/system/multi-user.target.wants/confluent-onboot.service
+
+cp -a /opt/confluent/bin/* /sysroot/opt/confluent/bin/
+chcon system_u:object_r:bin_t:s0 /sysroot/opt/confluent/bin/*

confluent_osdeploy/coreos/initramfs/usr/lib/systemd/system/confluent-rootfs.service

@@ -0,0 +1,22 @@
+[Unit]
+Description=Confluent initialization
+DefaultDependencies=false
+
+After=basic.target
+# Network is enabled here
+After=dracut-initqueue.service
+Before=ignition-setup-user.service
+Before=coreos-ignition-setup-user.service
+Before=coreos-livepxe-rootfs.service
+
+
+
+# If we fail, the boot will fail.  Be explicit about it.
+OnFailure=emergency.target
+OnFailureJobMode=isolate
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+ExecStart=/opt/confluent/bin/initconfluent.sh
+

confluent_osdeploy/coreos/profiles/default/initprofile.sh

@@ -0,0 +1,14 @@
+#!/bin/sh
+profname=$(basename $2)
+if file -L $1/images/ignition.img | grep gzip > /dev/null; then
+    mkdir -p /var/lib/confluent/private/os/${profname}/pending/
+    cd /var/lib/confluent/private/os/${profname}/pending/
+    zcat $1/images/ignition.img | cpio -dumiv
+fi
+ln -s $1/images/pxeboot/vmlinuz $2/boot/kernel && \
+ln -s $1/images/pxeboot/initrd.img $2/boot/initramfs/distribution && \
+mkdir -p $2/boot/efi/boot/ && \
+ln -s $1/images/pxeboot/rootfs.img $2/ && \
+(mcopy -i $1/images/efiboot.img ::efi/redhat/grubx64.efi $2/boot/efi/boot/ || \
+mcopy -i $1/images/efiboot.img ::efi/boot/grubx64.efi $2/boot/efi/boot/) && \
+mcopy -i $1/images/efiboot.img ::efi/boot/bootx64.efi $2/boot/efi/boot/

confluent_osdeploy/coreos/profiles/default/profile.yaml

@@ -0,0 +1,5 @@
+label: RedHat CoreOS %%VERSION%% %%ARCH%% (Default Profile)
+kernelargs: quiet random.trust_cpu=on ignition.firstboot ignition.platform.id=metal
+#the above boots and will have ignition agent phone home and await instructions
+#kernelargs: quiet random.trust_cpu=on ignition.firstboot ignition.platform.id=metal  coreos.inst=yes coreos.inst.install_dev=sda 
+#the above runs the installer to write to disk

confluent_osdeploy/el7-diskless/initramfs/usr/lib/dracut/hooks/cmdline/10-confluentdiskless.sh

@@ -0,0 +1,245 @@
+get_remote_apikey() {
+    while [ -z "$confluent_apikey" ]; do
+        /opt/confluent/bin/clortho $nodename $confluent_mgr > /etc/confluent/confluent.apikey
+        if grep ^SEALED: /etc/confluent/confluent.apikey > /dev/null; then
+            # we don't support remote sealed api keys anymore
+            echo > /etc/confluent/confluent.apikey
+        fi
+        confluent_apikey=$(cat /etc/confluent/confluent.apikey)
+        if [ -z "$confluent_apikey" ]; then
+            echo "Unable to acquire node api key, set deployment.apiarmed=once on node '$nodename', retrying..."
+            sleep 10
+        elif [ -c /dev/tpmrm0 -a -x /usr/bin/tpm2_startauthsession ]; then
+            tmpdir=$(mktemp -d)
+            cd $tmpdir
+            tpm2_startauthsession --session=session.ctx
+            tpm2_policypcr -Q --session=session.ctx --pcr-list="sha256:15" --policy=pcr15.sha256.policy
+            tpm2_createprimary -G ecc -Q --key-context=prim.ctx
+            (echo -n "CONFLUENT_APIKEY:";cat /etc/confluent/confluent.apikey) | tpm2_create -Q --policy=pcr15.sha256.policy --public=data.pub --private=data.priv -i - -C prim.ctx
+            tpm2_load -Q --parent-context=prim.ctx --public=data.pub --private=data.priv --name=confluent.apikey --key-context=data.ctx
+            tpm2_evictcontrol -Q -c data.ctx
+            tpm2_flushcontext session.ctx
+            cd - > /dev/null
+            rm -rf $tmpdir
+        fi
+    done
+}
+root=1
+rootok=1
+netroot=confluent
+clear
+mkdir -p /etc/ssh
+mkdir -p /var/tmp/
+mkdir -p /var/empty/sshd
+mkdir -p /etc/confluent
+sed -i '/^root:x/d' /etc/passwd
+echo root:x:0:0::/:/bin/bash >> /etc/passwd
+echo sshd:x:30:30:SSH User:/var/empty/sshd:/sbin/nologin >> /etc/passwd
+
+if ! grep console= /proc/cmdline >& /dev/null; then
+    autocons=$(/opt/confluent/bin/autocons)
+    autocons=${autocons##*/}
+    echo "Automatic console configured for $autocons"
+fi
+echo "Initializing confluent diskless environment"
+echo -n "udevd: "
+/usr/lib/systemd/systemd-udevd --daemon
+echo -n "Loading drivers..."
+udevadm trigger
+udevadm trigger --type=devices --action=add
+udevadm settle
+modprobe ib_ipoib
+modprobe ib_umad
+modprobe hfi1
+modprobe mlx5_ib
+echo "done"
+cat > /etc/ssh/sshd_config << EOF
+Port 2222
+Subsystem       sftp    /usr/libexec/openssh/sftp-server
+PermitRootLogin yes
+AuthorizedKeysFile      .ssh/authorized_keys
+EOF
+mkdir /root/.ssh
+mkdir /.ssh
+cat /ssh/*pubkey > /root/.ssh/authorized_keys 2>/dev/null
+cp /root/.ssh/authorized_keys /.ssh/
+cat /tls/*.pem > /etc/confluent/ca.pem
+mkdir -p /etc/pki/tls/certs
+cat /tls/*.pem > /etc/pki/tls/certs/ca-bundle.crt
+TRIES=0
+oldumask=$(umask)
+umask 0077
+tpmdir=$(mktemp -d)
+cd $tpmdir
+lasthdl=""
+if [ -c /dev/tpmrm0 -a -x /usr/bin/tpm2_getcap ]; then
+    for hdl in $(tpm2_getcap handles-persistent|awk '{print $2}'); do
+        tpm2_startauthsession --policy-session --session=session.ctx
+        tpm2_policypcr -Q --session=session.ctx --pcr-list="sha256:15" --policy=pcr15.sha256.policy
+        unsealeddata=$(tpm2_unseal --auth=session:session.ctx -Q -c $hdl 2>/dev/null)
+        tpm2_flushcontext session.ctx
+        if [[ $unsealeddata == "CONFLUENT_APIKEY:"* ]]; then
+            confluent_apikey=${unsealeddata#CONFLUENT_APIKEY:}
+            echo $confluent_apikey > /etc/confluent/confluent.apikey
+            if [ -n "$lasthdl" ]; then
+                tpm2_evictcontrol -c $lasthdl
+            fi
+            lasthdl=$hdl
+        fi
+    done
+fi
+cd - > /dev/null
+rm -rf $tpmdir
+touch /etc/confluent/confluent.info
+cd /sys/class/net
+echo -n "Scanning for network configuration..."
+while ! grep ^EXTMGRINFO: /etc/confluent/confluent.info | awk -F'|' '{print $3}' | grep 1 >& /dev/null && [ "$TRIES" -lt 30 ]; do
+    TRIES=$((TRIES + 1))
+    for i in *; do
+        ip link set $i up
+    done
+    /opt/confluent/bin/copernicus -t > /etc/confluent/confluent.info
+done
+cd /
+nodename=$(grep ^NODENAME /etc/confluent/confluent.info|awk '{print $2}')
+hostname $nodename
+confluent_mgr=$(grep '^EXTMGRINFO:.*1$' /etc/confluent/confluent.info | head -n 1 | awk -F': ' '{print $2}' | awk -F'|' '{print $1}')
+if [ -z "$confluent_mgr" ]; then
+    confluent_mgr=$(grep ^MANAGER: /etc/confluent/confluent.info|head -n 1 | awk '{print $2}')
+fi
+if [[ $confluent_mgr == *%* ]]; then
+    echo $confluent_mgr | awk -F% '{print $2}' > /tmp/confluent.ifidx
+    ifidx=$(cat /tmp/confluent.ifidx)
+    ifname=$(ip link |grep ^$ifidx:|awk '{print $2}')
+    ifname=${ifname%:}
+fi
+
+ready=0
+while [ $ready = "0" ]; do
+    get_remote_apikey
+    if [[ $confluent_mgr == *:* ]]; then
+        confluent_mgr="[${confluent_mgr/\%/%25}]"
+    fi
+    tmperr=$(mktemp)
+    curl -gsSf -H "CONFLUENT_NODENAME: $nodename" -H "CONFLUENT_APIKEY: $confluent_apikey" https://$confluent_mgr/confluent-api/self/deploycfg > /etc/confluent/confluent.deploycfg 2> $tmperr
+    if grep 401 $tmperr > /dev/null; then
+        confluent_apikey=""
+        if [ -n "$lasthdl" ]; then
+            tpm2_evictcontrol -c $lasthdl
+        fi
+        confluent_mgr=${confluent_mgr#[}
+        confluent_mgr=${confluent_mgr%]}
+    else
+        ready=1
+    fi
+    rm $tmperr
+done
+if [ ! -z "$autocons" ] && grep textconsole: true /etc/confluent/confluent.deploycfg > /dev/null; then /opt/confluent/bin/autocons -c > /dev/null; fi
+if [ -c /dev/tpmrm0 -a -x /usr/bin/tpm2_pcrextend ]; then
+    tpm2_pcrextend 15:sha256=2fbe96c50dde38ce9cd2764ddb79c216cfbcd3499568b1125450e60c45dd19f2
+fi
+umask $oldumask
+autoconfigmethod=$(grep ^ipv4_method: /etc/confluent/confluent.deploycfg |awk '{print $2}')
+if [ "$autoconfigmethod" = "dhcp" ]; then
+    echo -n "Attempting to use dhcp to bring up $ifname..."
+    dhclient $ifname
+    echo "Complete:"
+    ip addr show dev $ifname
+else
+    v4addr=$(grep ^ipv4_address: /etc/confluent/confluent.deploycfg)
+    v4addr=${v4addr#ipv4_address: }
+    v4gw=$(grep ^ipv4_gateway: /etc/confluent/confluent.deploycfg)
+    v4gw=${v4gw#ipv4_gateway: }
+    if [ "$v4gw" = "null" ]; then
+        v4gw=""
+    fi
+    v4nm=$(grep ^prefix: /etc/confluent/confluent.deploycfg)
+    v4nm=${v4nm#prefix: }
+    echo "Setting up $ifname as static at $v4addr/$v4nm"
+    ip addr add dev $ifname $v4addr/$v4nm
+    if [ ! -z "$v4gw" ]; then
+        ip route add default via $v4gw
+    fi
+    mkdir -p /run/NetworkManager/system-connections
+    cat > /run/NetworkManager/system-connections/$ifname.nmconnection << EOC
+[connection]
+EOC
+    echo id=${ifname} >> /run/NetworkManager/system-connections/$ifname.nmconnection
+    echo uuid=$(uuidgen) >> /run/NetworkManager/system-connections/$ifname.nmconnection
+    cat >> /run/NetworkManager/system-connections/$ifname.nmconnection << EOC
+type=ethernet
+autoconnect-retries=1
+EOC
+    echo interface-name=$ifname >> /run/NetworkManager/system-connections/$ifname.nmconnection
+    cat >> /run/NetworkManager/system-connections/$ifname.nmconnection << EOC
+multi-connect=1
+permissions=
+wait-device-timeout=60000
+
+[ethernet]
+mac-address-blacklist=
+
+[ipv4]
+EOC
+    echo address1=$v4addr/$v4nm >> /run/NetworkManager/system-connections/$ifname.nmconnection
+    if [ ! -z "$v4gw" ]; then
+        echo gateway=$v4gw >> /run/NetworkManager/system-connections/$ifname.nmconnection
+    fi
+    nameserversec=0
+    nameservers=""
+    while read -r entry; do
+        if [ $nameserversec = 1 ]; then
+            if [[ $entry == "-"* ]]; then
+                nameservers="$nameservers"${entry#- }";"
+                continue
+            fi
+        fi
+        nameserversec=0
+        if [ "${entry%:*}" = "nameservers" ]; then
+            nameserversec=1
+            continue
+        fi
+    done < /etc/confluent/confluent.deploycfg
+    echo dns=$nameservers >> /run/NetworkManager/system-connections/$ifname.nmconnection
+    dnsdomain=$(grep ^dnsdomain: /etc/confluent/confluent.deploycfg)
+    dnsdomain=${dnsdomain#dnsdomain: }
+    echo dns-search=$dnsdomain >> /run/NetworkManager/system-connections/$ifname.nmconnection
+    cat >> /run/NetworkManager/system-connections/$ifname.nmconnection << EOC
+may-fail=false
+method=manual
+
+[ipv6]
+addr-gen-mode=eui64
+method=auto
+
+[proxy]
+EOC
+fi
+chmod 600 /run/NetworkManager/system-connections/*.nmconnection
+echo -n "Initializing ssh..."
+ssh-keygen -A
+for pubkey in /etc/ssh/ssh_host*key.pub; do
+    certfile=${pubkey/.pub/-cert.pub}
+    privfile=${pubkey%.pub}
+    curl -gsf -X POST -H "CONFLUENT_NODENAME: $nodename" -H "CONFLUENT_APIKEY: $confluent_apikey" -d @$pubkey  https://$confluent_mgr/confluent-api/self/sshcert > $certfile
+    if [ -s $certfile ]; then
+        echo HostCertificate $certfile >> /etc/ssh/sshd_config
+    fi
+    echo HostKey $privfile >> /etc/ssh/sshd_config
+done
+/usr/sbin/sshd
+confluent_profile=$(grep ^profile: /etc/confluent/confluent.deploycfg| awk '{print $2}')
+confluent_proto=$(grep ^protocol: /etc/confluent/confluent.deploycfg| awk '{print $2}')
+confluent_urls=""
+for addr in $(grep ^MANAGER: /etc/confluent/confluent.info|awk '{print $2}'|sed -e s/%/%25/); do
+    if [[ $addr == *:* ]]; then
+        confluent_urls="$confluent_urls $confluent_proto://[$addr]/confluent-public/os/$confluent_profile/rootimg.sfs"
+    else
+        confluent_urls="$confluent_urls $confluent_proto://$addr/confluent-public/os/$confluent_profile/rootimg.sfs"
+    fi
+done
+confluent_mgr=$(grep ^deploy_server: /etc/confluent/confluent.deploycfg| awk '{print $2}')
+mkdir -p /etc/confluent
+curl -gsf https://$confluent_mgr/confluent-public/os/$confluent_profile/scripts/functions > /etc/confluent/functions
+. /etc/confluent/functions
+source_remote imageboot.sh

confluent_osdeploy/el7-diskless/profiles/default/scripts/firstboot.custom

@@ -0,0 +1,4 @@
+. /etc/confluent/functions
+# This is a convenient place to keep customizations separate from modifying the stock scripts
+# While modification of the stock scripts is fine, it may be easier to rebase to a newer
+# stock profile if the '.custom' files are used.

confluent_osdeploy/el7-diskless/profiles/default/scripts/firstboot.service

@@ -0,0 +1,11 @@
+[Unit]
+Description=First Boot Process
+Requires=network-online.target
+After=network-online.target
+
+[Service]
+ExecStart=/opt/confluent/bin/firstboot.sh
+
+[Install]
+WantedBy=multi-user.target
+

confluent_osdeploy/el7-diskless/profiles/default/scripts/firstboot.sh

@@ -0,0 +1,40 @@
+#!/bin/sh
+
+# This script is executed on the first boot after install has
+# completed. It is best to edit the middle of the file as
+# noted below so custom commands are executed before
+# the script notifies confluent that install is fully complete.
+
+nodename=$(grep ^NODENAME /etc/confluent/confluent.info|awk '{print $2}')
+confluent_apikey=$(cat /etc/confluent/confluent.apikey)
+confluent_mgr=$(grep ^deploy_server: /etc/confluent/confluent.deploycfg|awk '{print $2}')
+confluent_profile=$(grep ^profile: /etc/confluent/confluent.deploycfg|awk '{print $2}')
+export nodename confluent_mgr confluent_profile
+. /etc/confluent/functions
+exec >> /var/log/confluent/confluent-firstboot.log
+exec 2>> /var/log/confluent/confluent-firstboot.log
+chmod 600 /var/log/confluent/confluent-firstboot.log
+tail -f /var/log/confluent/confluent-firstboot.log > /dev/console &
+logshowpid=$!
+while ! ping -c 1 $confluent_mgr >& /dev/null; do
+	sleep 1
+done
+
+if [ ! -f /etc/confluent/firstboot.ran ]; then
+    touch /etc/confluent/firstboot.ran
+
+    cat /etc/confluent/tls/*.pem >> /etc/pki/tls/certs/ca-bundle.crt
+
+    run_remote firstboot.custom
+    # Firstboot scripts may be placed into firstboot.d, e.g. firstboot.d/01-firstaction.sh, firstboot.d/02-secondaction.sh
+    run_remote_parts firstboot.d
+
+    # Induce execution of remote configuration, e.g. ansible plays in ansible/firstboot.d/
+    run_remote_config firstboot.d
+fi
+
+curl -X POST -d 'status: complete' -H "CONFLUENT_NODENAME: $nodename" -H "CONFLUENT_APIKEY: $confluent_apikey" https://$confluent_mgr/confluent-api/self/updatestatus
+systemctl disable firstboot
+rm /etc/systemd/system/firstboot.service
+rm /etc/confluent/firstboot.ran
+kill $logshowpid

confluent_osdeploy/el7-diskless/profiles/default/scripts/functions

@@ -0,0 +1,196 @@
+#!/bin/bash
+function test_mgr() {
+    if curl -s https://${1}/confluent-api/ > /dev/null; then
+        return 0
+    fi
+    return 1
+}
+
+function confluentpython() {
+    if [ -x /usr/libexec/platform-python ]; then
+        /usr/libexec/platform-python $*
+    elif [ -x /usr/bin/python3 ]; then
+        /usr/bin/python3 $*
+    elif [ -x /usr/bin/python ]; then
+        /usr/bin/python $*
+    elif [ -x /usr/bin/python2 ]; then
+        /usr/bin/python2 $*
+    fi
+}
+
+function set_confluent_vars() {
+    if [ -z "$nodename" ]; then
+        nodename=$(grep ^NODENAME: /etc/confluent/confluent.info | awk '{print $2}')
+    fi
+    if [[ "$confluent_mgr" == *"%"* ]]; then
+        confluent_mgr=""
+    fi
+    if [ -z "$confluent_mgr" ]; then
+        confluent_mgr=$(grep ^deploy_server: /etc/confluent/confluent.deploycfg | sed -e 's/[^ ]*: //')
+        if ! test_mgr $confluent_mgr; then
+            confluent_mgr=$(grep ^deploy_server_v6: /etc/confluent/confluent.deploycfg | sed -e 's/[^ ]*: //')
+            if [[ "$confluent_mgr" = *":"* ]]; then
+                confluent_mgr="[$confluent_mgr]"
+            fi
+        fi
+        if ! test_mgr $confluent_mgr; then
+            BESTMGRS=$(grep ^EXTMGRINFO: /etc/confluent/confluent.info | grep '|1$' | sed -e 's/EXTMGRINFO: //' -e 's/|.*//')
+            OKMGRS=$(grep ^EXTMGRINFO: /etc/confluent/confluent.info | grep '|0$' | sed -e 's/EXTMGRINFO: //' -e 's/|.*//')
+            for confluent_mgr in $BESTMGRS $OKMGRS; do
+                if [[ $confluent_mgr == *":"* ]]; then
+                    confluent_mgr="[$confluent_mgr]"
+                fi
+                if test_mgr $confluent_mgr; then
+                    break
+                fi
+            done
+        fi
+    fi
+    if [ -z "$confluent_profile" ]; then
+        confluent_profile=$(grep ^profile: /etc/confluent/confluent.deploycfg | sed -e 's/[^ ]*: //')
+    fi
+}
+
+fetch_remote() {
+    curlargs=""
+    if [ -f /etc/confluent/ca.pem ]; then
+        curlargs=" --cacert /etc/confluent/ca.pem"
+    fi
+    set_confluent_vars
+    mkdir -p $(dirname $1)
+    curl -f -sS $curlargs https://$confluent_mgr/confluent-public/os/$confluent_profile/scripts/$1 > $1
+    if [ $? != 0 ]; then echo $1 failed to download; return 1; fi
+}
+
+source_remote_parts() {
+    confluentscripttmpdir=$(mktemp -d /tmp/confluentscripts.XXXXXXXXX)
+    apiclient=/opt/confluent/bin/apiclient
+    if [ -f /etc/confluent/apiclient ]; then
+        apiclient=/etc/confluent/apiclient
+    fi
+    scriptlist=$(confluentpython $apiclient /confluent-api/self/scriptlist/$1|sed -e 's/^- //')
+    for script in $scriptlist; do
+        source_remote $1/$script
+    done
+    rm -rf $confluentscripttmpdir
+    unset confluentscripttmpdir
+}
+
+run_remote_parts() {
+    confluentscripttmpdir=$(mktemp -d /tmp/confluentscripts.XXXXXXXXX)
+    apiclient=/opt/confluent/bin/apiclient
+    if [ -f /etc/confluent/apiclient ]; then
+        apiclient=/etc/confluent/apiclient
+    fi
+    scriptlist=$(confluentpython $apiclient /confluent-api/self/scriptlist/$1|sed -e 's/^- //')
+    for script in $scriptlist; do
+        run_remote $1/$script
+    done
+    rm -rf $confluentscripttmpdir
+    unset confluentscripttmpdir
+}
+
+source_remote() {
+    set_confluent_vars
+    unsettmpdir=0
+    echo
+    echo '---------------------------------------------------------------------------'
+    echo Sourcing $1 from https://$confluent_mgr/confluent-public/os/$confluent_profile/scripts/
+    if [ -z "$confluentscripttmpdir" ]; then
+        confluentscripttmpdir=$(mktemp -d /tmp/confluentscripts.XXXXXXXXX)
+        unsettmpdir=1
+    fi
+    echo Sourcing from $confluentscripttmpdir
+    cd $confluentscripttmpdir
+    fetch_remote $1
+    if [ $? != 0 ]; then echo $1 failed to download; return 1; fi
+    chmod +x $1
+    cmd=$1
+    shift
+    source ./$cmd
+    cd - > /dev/null
+    if [ "$unsettmpdir" = 1 ]; then
+        rm -rf $confluentscripttmpdir
+        unset confluentscripttmpdir
+        unsettmpdir=0
+    fi
+    rm -rf $confluentscripttmpdir
+    return $retcode
+}
+
+run_remote() {
+    requestedcmd="'$*'"
+    unsettmpdir=0
+    set_confluent_vars
+    echo
+    echo '---------------------------------------------------------------------------'
+    echo Running $requestedcmd from https://$confluent_mgr/confluent-public/os/$confluent_profile/scripts/
+    if [ -z "$confluentscripttmpdir" ]; then
+        confluentscripttmpdir=$(mktemp -d /tmp/confluentscripts.XXXXXXXXX)
+        unsettmpdir=1
+    fi
+    echo Executing in $confluentscripttmpdir
+    cd $confluentscripttmpdir
+    fetch_remote $1
+    if [ $? != 0 ]; then echo $requestedcmd failed to download; return 1; fi
+    chmod +x $1
+    cmd=$1
+    if [ -x /usr/bin/chcon ]; then
+        chcon system_u:object_r:bin_t:s0 $cmd
+    fi
+    shift
+    ./$cmd $*
+    retcode=$?
+    if [ $retcode -ne 0 ]; then
+        echo "$requestedcmd exited with code $retcode"
+    fi
+    cd - > /dev/null
+    if [ "$unsettmpdir" = 1 ]; then
+        rm -rf $confluentscripttmpdir
+        unset confluentscripttmpdir
+        unsettmpdir=0
+    fi
+    return $retcode
+}
+
+run_remote_python() {
+    echo
+    set_confluent_vars
+    if [ -f /etc/confluent/ca.pem ]; then
+        curlargs=" --cacert /etc/confluent/ca.pem"
+    fi
+    echo '---------------------------------------------------------------------------'
+    echo Running python script "'$*'" from https://$confluent_mgr/confluent-public/os/$confluent_profile/scripts/
+    confluentscripttmpdir=$(mktemp -d /tmp/confluentscripts.XXXXXXXXX)
+    echo Executing in $confluentscripttmpdir
+    cd $confluentscripttmpdir
+    mkdir -p $(dirname $1)
+    curl -f -sS $curlargs https://$confluent_mgr/confluent-public/os/$confluent_profile/scripts/$1 > $1
+    if [ $? != 0 ]; then echo "'$*'" failed to download; return 1; fi
+    confluentpython $*
+    retcode=$?
+    echo "'$*' exited with code $retcode"
+    cd - > /dev/null
+    rm -rf $confluentscripttmpdir
+    unset confluentscripttmpdir
+    return $retcode
+}
+
+run_remote_config() {
+    echo
+    set_confluent_vars
+    apiclient=/opt/confluent/bin/apiclient
+    if [ -f /etc/confluent/apiclient ]; then
+        apiclient=/etc/confluent/apiclient
+    fi
+    echo '---------------------------------------------------------------------------'
+    echo Requesting to run remote configuration for "'$*'" from $confluent_mgr under profile $confluent_profile
+    confluentpython $apiclient /confluent-api/self/remoteconfig/"$*" -d {}
+    confluentpython $apiclient /confluent-api/self/remoteconfig/status -w 204
+    echo
+    echo 'Completed remote configuration'
+    echo '---------------------------------------------------------------------------'
+    return
+}
+#If invoked as a command, use the arguments to actually run a function
+(return 0 2>/dev/null) || $1 "${@:2}"

confluent_osdeploy/el7-diskless/profiles/default/scripts/getinstalldisk

@@ -0,0 +1,93 @@
+import subprocess
+import os
+
+class DiskInfo(object):
+    def __init__(self, devname):
+        self.name = devname
+        self.wwn = None
+        self.path = None
+        self.model = ''
+        self.size = 0
+        self.driver = None
+        self.mdcontainer = ''
+        devnode = '/dev/{0}'.format(devname)
+        qprop = subprocess.check_output(
+            ['udevadm', 'info', '--query=property', devnode])
+        if not isinstance(qprop, str):
+            qprop = qprop.decode('utf8')
+        for prop in qprop.split('\n'):
+            if '=' not in prop:
+                continue
+            k, v = prop.split('=', 1)
+            if k == 'DEVTYPE' and v != 'disk':
+                raise Exception('Not a disk')
+            elif k == 'DM_NAME':
+                raise Exception('Device Mapper')
+            elif k == 'ID_MODEL':
+                self.model = v
+            elif k == 'DEVPATH':
+                self.path = v
+            elif k == 'ID_WWN':
+                self.wwn = v
+            elif k == 'MD_CONTAINER':
+                self.mdcontainer = v
+        attrs = subprocess.check_output(['udevadm', 'info', '-a', devnode])
+        if not isinstance(attrs, str):
+            attrs = attrs.decode('utf8')
+        for attr in attrs.split('\n'):
+            if '==' not in attr:
+                continue
+            k, v = attr.split('==', 1)
+            k = k.strip()
+            if k == 'ATTRS{size}':
+                self.size = v.replace('"', '')
+            elif (k == 'DRIVERS' and not self.driver
+                    and v not in ('"sd"', '""')):
+                self.driver = v.replace('"', '')
+        if not self.driver and 'imsm' not in self.mdcontainer:
+            raise Exception("No driver detected")
+        if os.path.exists('/sys/block/{0}/size'.format(self.name)):
+            with open('/sys/block/{0}/size'.format(self.name), 'r') as sizesrc:
+                self.size = int(sizesrc.read()) * 512
+        if int(self.size) < 536870912:
+            raise Exception("Device too small for install")
+
+    @property
+    def priority(self):
+        if self.model.lower() in ('thinksystem_m.2_vd', 'thinksystem m.2', 'thinksystem_m.2'):
+            return 0
+        if 'imsm' in self.mdcontainer:
+            return 1
+        if self.driver == 'ahci':
+            return 2
+        if self.driver.startswith('megaraid'):
+            return 3
+        if self.driver.startswith('mpt'):
+            return 4
+        return 99
+
+    def __repr__(self):
+        return repr({
+            'name': self.name,
+            'path': self.path,
+            'wwn': self.wwn,
+            'driver': self.driver,
+            'size': self.size,
+            'model': self.model,
+        })
+
+
+def main():
+    disks = []
+    for disk in sorted(os.listdir('/sys/class/block')):
+        try:
+            disk = DiskInfo(disk)
+            disks.append(disk)
+        except Exception as e:
+            print("Skipping {0}: {1}".format(disk, str(e)))
+    nd = [x.name for x in sorted(disks, key=lambda x: x.priority)]
+    if nd:
+        open('/tmp/installdisk', 'w').write(nd[0])
+
+if __name__ == '__main__':
+    main()

confluent_osdeploy/el7-diskless/profiles/default/scripts/image2disk.py

@@ -0,0 +1,376 @@
+#!/usr/bin/python3
+import glob
+import json
+import os
+import re
+import time
+import shutil
+import socket
+import stat
+import struct
+import sys
+import subprocess
+
+def get_next_part_meta(img, imgsize):
+    if img.tell() == imgsize:
+        return None
+    pathlen = struct.unpack('!H', img.read(2))[0]
+    mountpoint = img.read(pathlen).decode('utf8')
+    jsonlen = struct.unpack('!I', img.read(4))[0]
+    metadata = json.loads(img.read(jsonlen).decode('utf8'))
+    img.seek(16, 1) # skip the two 64-bit values we don't use, they are in json
+    nextlen = struct.unpack('!H', img.read(2))[0]
+    img.seek(nextlen, 1) # skip filesystem type
+    nextlen = struct.unpack('!H', img.read(2))[0]
+    img.seek(nextlen, 1) # skip orig devname (redundant with json)
+    nextlen = struct.unpack('!H', img.read(2))[0]
+    img.seek(nextlen, 1) # skip padding
+    nextlen = struct.unpack('!Q', img.read(8))[0]
+    img.seek(nextlen, 1)  # go to next section
+    return metadata
+
+def get_multipart_image_meta(img):
+    img.seek(0, 2)
+    imgsize = img.tell()
+    img.seek(16)
+    seekamt = img.read(1)
+    img.seek(struct.unpack('B', seekamt)[0], 1)
+    partinfo = get_next_part_meta(img, imgsize)
+    while partinfo:
+        yield partinfo
+        partinfo = get_next_part_meta(img, imgsize)
+
+def get_image_metadata(imgpath):
+    with open(imgpath, 'rb') as img:
+        header = img.read(16)
+        if header == b'\x63\x7b\x9d\x26\xb7\xfd\x48\x30\x89\xf9\x11\xcf\x18\xfd\xff\xa1':
+            for md in get_multipart_image_meta(img):
+                yield md
+        else:
+            raise Exception('Installation from single part image not supported')
+
+class PartedRunner():
+    def __init__(self, disk):
+        self.disk = disk
+
+    def run(self, command):
+        command = command.split()
+        command = ['parted', '-a', 'optimal', '-s', self.disk] + command
+        return subprocess.check_output(command).decode('utf8')
+
+def fixup(rootdir, vols):
+    devbymount = {}
+    for vol in vols:
+        devbymount[vol['mount']] = vol['targetdisk']
+    fstabfile = os.path.join(rootdir, 'etc/fstab')
+    with open(fstabfile) as tfile:
+        fstab = tfile.read().split('\n')
+    while not fstab[0]:
+        fstab = fstab[1:]
+    if os.path.exists(os.path.join(rootdir, '.autorelabel')):
+        os.unlink(os.path.join(rootdir, '.autorelabel'))
+    with open(fstabfile, 'w') as tfile:
+        for tab in fstab:
+            entry = tab.split()
+            if tab.startswith('#ORIGFSTAB#'):
+                if entry[1] in devbymount:
+                    targetdev = devbymount[entry[1]]
+                    if targetdev.startswith('/dev/localstorage/'):
+                        entry[0] = targetdev
+                    else:
+                        uuid = subprocess.check_output(['blkid', '-s', 'UUID', '-o', 'value', targetdev]).decode('utf8')
+                        uuid = uuid.strip()
+                        entry[0] = 'UUID={}'.format(uuid)
+                elif entry[2] == 'swap':
+                    entry[0] = '/dev/mapper/localstorage-swap'
+                entry[0] = entry[0].ljust(42)
+                entry[1] = entry[1].ljust(16)
+                entry[3] = entry[3].ljust(28)
+                tab = '\t'.join(entry)
+            tfile.write(tab + '\n')
+    with open(os.path.join(rootdir, 'etc/hostname'), 'w') as nameout:
+        nameout.write(socket.gethostname() + '\n')
+    selinuxconfig = os.path.join(rootdir, 'etc/selinux/config')
+    policy = None
+    if os.path.exists(selinuxconfig):
+        with open(selinuxconfig) as cfgin:
+            sec = cfgin.read().split('\n')
+            for l in sec:
+                l = l.split('#', 1)[0]
+                if l.startswith('SELINUXTYPE='):
+                    _, policy = l.split('=')
+    for sshkey in glob.glob(os.path.join(rootdir, 'etc/ssh/*_key*')):
+        os.unlink(sshkey)
+    for sshkey in glob.glob('/etc/ssh/*_key*'):
+        newkey = os.path.join(rootdir, sshkey[1:])
+        shutil.copy2(sshkey, newkey)
+        finfo = os.stat(sshkey)
+        os.chown(newkey, finfo[stat.ST_UID], finfo[stat.ST_GID])
+    for ifcfg in glob.glob(os.path.join(rootdir, 'etc/sysconfig/network-scripts/*')):
+        os.unlink(ifcfg)
+    for ifcfg in glob.glob(os.path.join(rootdir, 'etc/NetworkManager/system-connections/*')):
+        os.unlink(ifcfg)
+    for ifcfg in glob.glob('/run/NetworkManager/system-connections/*'):
+        newcfg = ifcfg.split('/')[-1]
+        newcfg = os.path.join(rootdir, 'etc/NetworkManager/system-connections/{0}'.format(newcfg))
+        shutil.copy2(ifcfg, newcfg)
+    shutil.rmtree(os.path.join(rootdir, 'etc/confluent/'))
+    shutil.copytree('/etc/confluent', os.path.join(rootdir, 'etc/confluent'))
+    if policy:
+        sys.stdout.write('Applying SELinux labeling...')
+        sys.stdout.flush()
+        subprocess.check_call(['setfiles', '-r', rootdir, os.path.join(rootdir, 'etc/selinux/{}/contexts/files/file_contexts'.format(policy)), os.path.join(rootdir, 'etc')])
+        subprocess.check_call(['setfiles', '-r', rootdir, os.path.join(rootdir, 'etc/selinux/{}/contexts/files/file_contexts'.format(policy)), os.path.join(rootdir, 'opt')])
+        sys.stdout.write('Done\n')
+        sys.stdout.flush()
+    for metafs in ('proc', 'sys', 'dev'):
+        subprocess.check_call(['mount', '-o', 'bind', '/{}'.format(metafs), os.path.join(rootdir, metafs)])
+    with open(os.path.join(rootdir, 'etc/sysconfig/grub')) as defgrubin:
+        defgrub = defgrubin.read().split('\n')
+    with open(os.path.join(rootdir, 'etc/sysconfig/grub'), 'w') as defgrubout:
+        for gline in defgrub:
+            gline = gline.split()
+            newline = []
+            for ent in gline:
+                if ent.startswith('resume=') or ent.startswith('rd.lvm.lv'):
+                    continue
+                newline.append(ent)
+            defgrubout.write(' '.join(newline) + '\n')
+    grubcfg = subprocess.check_output(['find', os.path.join(rootdir, 'boot'), '-name', 'grub.cfg']).decode('utf8').strip().replace(rootdir, '/')
+    subprocess.check_call(['chroot', rootdir, 'grub2-mkconfig', '-o', grubcfg])
+    newroot = None
+    with open('/etc/shadow') as shadowin:
+        shents = shadowin.read().split('\n')
+        for shent in shents:
+            shent = shent.split(':')
+            if not shent:
+                continue
+            if shent[0] == 'root' and shent[1] not in ('*', '!!', ''):
+                newroot = shent[1]
+    if newroot:
+        shlines = None
+        with open(os.path.join(rootdir, 'etc/shadow')) as oshadow:
+            shlines = oshadow.read().split('\n')
+        with open(os.path.join(rootdir, 'etc/shadow'), 'w') as oshadow:
+            for line in shlines:
+                if line.startswith('root:'):
+                    line = line.split(':')
+                    line[1] = newroot
+                    line = ':'.join(line)
+                oshadow.write(line + '\n')
+    partnum = None
+    targblock = None
+    for vol in vols:
+        if vol['mount'] == '/boot/efi':
+            targdev = vol['targetdisk']
+            partnum = re.search('(\d+)$', targdev).group(1)
+            targblock = re.search('(.*)\d+$', targdev).group(1)
+    if targblock:
+        shimpath = subprocess.check_output(['find', os.path.join(rootdir, 'boot/efi'), '-name', 'shimx64.efi']).decode('utf8').strip()
+        shimpath = shimpath.replace(rootdir, '/').replace('/boot/efi', '').replace('//', '/').replace('/', '\\')
+        subprocess.check_call(['efibootmgr', '-c', '-d', targblock, '-l', shimpath, '--part', partnum])
+    #other network interfaces
+
+
+def had_swap():
+    with open('/etc/fstab') as tabfile:
+        tabs = tabfile.read().split('\n')
+        for tab in tabs:
+            tab = tab.split()
+            if len(tab) < 3:
+                continue
+            if tab[2] == 'swap':
+                return True
+    return False
+
+def install_to_disk(imgpath):
+    lvmvols = {}
+    deftotsize = 0
+    mintotsize = 0
+    deflvmsize = 0
+    minlvmsize = 0
+    biggestsize = 0
+    biggestfs = None
+    plainvols = {}
+    allvols = []
+    swapsize = 0
+    if had_swap():
+        with open('/proc/meminfo') as meminfo:
+            swapsize = meminfo.read().split('\n')[0]
+        swapsize = int(swapsize.split()[1])
+        if swapsize < 2097152:
+            swapsize = swapsize * 2
+        elif swapsize > 8388608 and swapsize < 67108864:
+            swapsize = swapsize * 0.5
+        elif swapsize >= 67108864:
+            swapsize = 33554432
+        swapsize = int(swapsize * 1024)
+    deftotsize = swapsize
+    mintotsize = swapsize
+    for fs in get_image_metadata(imgpath):
+        allvols.append(fs)
+        deftotsize += fs['initsize']
+        mintotsize += fs['minsize']
+        if fs['initsize'] > biggestsize:
+            biggestfs = fs
+            biggestsize = fs['initsize']
+        if fs['device'].startswith('/dev/mapper'):
+            lvmvols[fs['device'].replace('/dev/mapper/', '')] = fs
+            deflvmsize += fs['initsize']
+            minlvmsize += fs['minsize']
+        else:
+            plainvols[int(re.search('(\d+)$', fs['device'])[0])] = fs
+    with open('/tmp/installdisk') as diskin:
+        instdisk = diskin.read()
+    instdisk = '/dev/' + instdisk
+    parted = PartedRunner(instdisk)
+    dinfo = parted.run('unit s print')
+    dinfo = dinfo.split('\n')
+    sectors = 0
+    sectorsize = 0
+    for inf in dinfo:
+        if inf.startswith('Disk {0}:'.format(instdisk)):
+            _, sectors = inf.split(': ')
+            sectors = int(sectors.replace('s', ''))
+        if inf.startswith('Sector size (logical/physical):'):
+            _, sectorsize = inf.split(':')
+            sectorsize = sectorsize.split('/')[0]
+            sectorsize = sectorsize.replace('B', '')
+            sectorsize = int(sectorsize)
+    # for now, only support resizing/growing the largest partition
+    minexcsize = deftotsize - biggestfs['initsize']
+    mintotsize = deftotsize - biggestfs['initsize'] + biggestfs['minsize']
+    minsectors = mintotsize // sectorsize
+    if sectors < (minsectors + 65536):
+        raise Exception('Disk too small to fit image')
+    biggestsectors = sectors - (minexcsize // sectorsize)
+    biggestsize = sectorsize * biggestsectors
+    parted.run('mklabel gpt')
+    curroffset = 2048
+    for volidx in sorted(plainvols):
+        vol = plainvols[volidx]
+        if vol is not biggestfs:
+            size = vol['initsize'] // sectorsize
+        else:
+            size = biggestsize // sectorsize
+        size += 2047 - (size % 2048)
+        end = curroffset + size
+        if end > sectors:
+            end = sectors
+        parted.run('mkpart primary {}s {}s'.format(curroffset, end))
+        vol['targetdisk'] = instdisk + '{0}'.format(volidx)
+        curroffset += size + 1
+    if not lvmvols:
+        if swapsize:
+            swapsize = swapsize // sectorsize
+            swapsize += 2047 - (size % 2048)
+            end = curroffset + swapsize
+            if end > sectors:
+                end = sectors
+            parted.run('mkpart swap {}s {}s'.format(curroffset, end))
+            subprocess.check_call(['mkswap', instdisk + '{}'.format(volidx + 1)])
+    else:
+        parted.run('mkpart lvm {}s 100%'.format(curroffset))
+        lvmpart = instdisk + '{}'.format(volidx + 1)
+        subprocess.check_call(['pvcreate', '-ff', '-y', lvmpart])
+        subprocess.check_call(['vgcreate', 'localstorage', lvmpart])
+        vginfo = subprocess.check_output(['vgdisplay', 'localstorage', '--units', 'b']).decode('utf8')
+        vginfo = vginfo.split('\n')
+        pesize = 0
+        pes = 0
+        for infline in vginfo:
+            infline = infline.split()
+            if len(infline) >= 3 and infline[:2] == ['PE', 'Size']:
+                pesize = int(infline[2])
+            if len(infline) >= 5 and infline[:2] == ['Free', 'PE']:
+                pes = int(infline[4])
+        takeaway = swapsize // pesize
+        for volidx in lvmvols:
+            vol = lvmvols[volidx]
+            if vol is biggestfs:
+                continue
+            takeaway += vol['initsize'] // pesize
+            takeaway += 1
+        biggestextents = pes - takeaway
+        for volidx in lvmvols:
+            vol = lvmvols[volidx]
+            if vol is biggestfs:
+                extents = biggestextents
+            else:
+                extents = vol['initsize'] // pesize
+                extents += 1
+            if vol['mount'] == '/':
+                lvname = 'root'
+            else:
+                lvname = vol['mount'].replace('/', '_')
+            subprocess.check_call(['lvcreate', '-l', '{}'.format(extents), '-y', '-n', lvname, 'localstorage'])
+            vol['targetdisk'] = '/dev/localstorage/{}'.format(lvname)
+        if swapsize:
+            subprocess.check_call(['lvcreate', '-y', '-l', '{}'.format(swapsize // pesize), '-n', 'swap', 'localstorage'])
+            subprocess.check_call(['mkswap', '/dev/localstorage/swap'])
+        os.makedirs('/run/imginst/targ')
+        for vol in allvols:
+            with open(vol['targetdisk'], 'wb') as partition:
+                partition.write(b'\x00' * 1 * 1024 * 1024)
+            subprocess.check_call(['mkfs.{}'.format(vol['filesystem']), vol['targetdisk']])
+            subprocess.check_call(['mount', vol['targetdisk'], '/run/imginst/targ'])
+            source = vol['mount'].replace('/', '_')
+            source = '/run/imginst/sources/' + source
+            blankfsstat = os.statvfs('/run/imginst/targ')
+            blankused = (blankfsstat.f_blocks - blankfsstat.f_bfree) * blankfsstat.f_bsize
+            sys.stdout.write('\nWriting {0}: '.format(vol['mount']))
+            with subprocess.Popen(['cp', '-ax', source + '/.', '/run/imginst/targ']) as copier:
+                stillrunning = copier.poll()
+                lastprogress = 0.0
+                while stillrunning is None:
+                    currfsstat = os.statvfs('/run/imginst/targ')
+                    currused = (currfsstat.f_blocks - currfsstat.f_bfree) * currfsstat.f_bsize
+                    currused -= blankused
+                    with open('/proc/meminfo') as meminf:
+                        for line in meminf.read().split('\n'):
+                            if line.startswith('Dirty:'):
+                                _, dirty, _ = line.split()
+                                dirty = int(dirty) * 1024
+                    progress = (currused - dirty) / vol['minsize']
+                    if progress < lastprogress:
+                        progress = lastprogress
+                    if progress > 0.99:
+                        progress = 0.99
+                    lastprogress = progress
+                    progress = progress * 100
+                    sys.stdout.write('\x1b[1K\rWriting {0}: {1:3.2f}%'.format(vol['mount'], progress))
+                    sys.stdout.flush()
+                    time.sleep(0.5)
+                    stillrunning = copier.poll()
+                if stillrunning != 0:
+                    raise Exception("Error copying volume")
+                with subprocess.Popen(['sync']) as syncrun:
+                    stillrunning = syncrun.poll()
+                    while stillrunning is None:
+                        with open('/proc/meminfo') as meminf:
+                            for line in meminf.read().split('\n'):
+                                if line.startswith('Dirty:'):
+                                    _, dirty, _ = line.split()
+                                    dirty = int(dirty) * 1024
+                        progress = (vol['minsize'] - dirty) / vol['minsize']
+                        if progress < lastprogress:
+                            progress = lastprogress
+                        if progress > 0.99:
+                            progress = 0.99
+                        lastprogress = progress
+                        progress = progress * 100
+                        sys.stdout.write('\x1b[1K\rWriting {0}: {1:3.2f}%'.format(vol['mount'], progress))
+                        sys.stdout.flush()
+                        time.sleep(0.5)
+                        stillrunning = syncrun.poll()
+                sys.stdout.write('\x1b[1K\rDone writing {0}'.format(vol['mount']))
+                sys.stdout.write('\n')
+                sys.stdout.flush()
+            subprocess.check_call(['umount', '/run/imginst/targ'])
+        for vol in allvols:
+            subprocess.check_call(['mount', vol['targetdisk'], '/run/imginst/targ/' + vol['mount']])
+        fixup('/run/imginst/targ', allvols)
+
+
+if __name__ == '__main__':
+    install_to_disk(os.environ['mountsrc'])

confluent_osdeploy/el7-diskless/profiles/default/scripts/imageboot.sh

@@ -0,0 +1,128 @@
+. /lib/dracut-lib.sh
+mkdir -p /mnt/remoteimg /mnt/remote /mnt/overlay
+if [ "untethered" = "$(getarg confluent_imagemethod)" ]; then
+    mount -t tmpfs untethered /mnt/remoteimg
+    curl https://$confluent_mgr/confluent-public/os/$confluent_profile/rootimg.sfs -o /mnt/remoteimg/rootimg.sfs
+else
+    confluent_urls="$confluent_urls https://$confluent_mgr/confluent-public/os/$confluent_profile/rootimg.sfs"
+    modprobe fuse
+    /opt/confluent/bin/urlmount $confluent_urls /mnt/remoteimg
+fi
+/opt/confluent/bin/confluent_imginfo /mnt/remoteimg/rootimg.sfs > /tmp/rootimg.info
+modprobe loop
+loopdev=$(losetup -f)
+export mountsrc=$loopdev
+losetup -r $loopdev /mnt/remoteimg/rootimg.sfs
+if grep '^Format: confluent_crypted' /tmp/rootimg.info > /dev/null; then
+    while ! curl -sf -H "CONFLUENT_NODENAME: $nodename" -H "CONFLUENT_APIKEY: $(cat /etc/confluent/confluent.apikey)" https://$confluent_mgr/confluent-api/self/profileprivate/pending/rootimg.key > /tmp/rootimg.key; do
+        echo "Unable to retrieve private key from $confluent_mgr (verify that confluent can access /var/lib/confluent/private/$confluent_profile/pending/rootimg.key)"
+        sleep 1
+    done
+    cipher=$(head -n 1 /tmp/rootimg.key)
+    key=$(tail -n 1 /tmp/rootimg.key)
+    len=$(wc -c /mnt/remoteimg/rootimg.sfs | awk '{print $1}')
+    len=$(((len-4096)/512))
+    dmsetup create cryptimg --table "0 $len crypt $cipher $key 0 $loopdev 8"
+    /opt/confluent/bin/confluent_imginfo /dev/mapper/cryptimg > /tmp/rootimg.info
+    mountsrc=/dev/mapper/cryptimg
+fi
+
+if grep '^Format: squashfs' /tmp/rootimg.info > /dev/null; then
+    mount -o ro $mountsrc /mnt/remote
+elif grep  '^Format: confluent_multisquash' /tmp/rootimg.info; then
+    tail -n +3 /tmp/rootimg.info  | awk '{gsub("/", "_"); print "echo 0 " $4 " linear '$mountsrc' " $3 " | dmsetup create mproot" $7}' > /tmp/setupmount.sh
+    . /tmp/setupmount.sh
+    cat /tmp/setupmount.sh |awk '{printf "mount /dev/mapper/"$NF" "; sub("mproot", ""); gsub("_", "/"); print "/mnt/remote"$NF}' > /tmp/mountparts.sh
+    . /tmp/mountparts.sh
+fi
+
+
+#mount -t tmpfs overlay /mnt/overlay
+modprobe zram
+memtot=$(grep ^MemTotal: /proc/meminfo|awk '{print $2}')
+memtot=$((memtot/2))$(grep ^MemTotal: /proc/meminfo | awk '{print $3'})
+echo $memtot > /sys/block/zram0/disksize
+mkfs.xfs /dev/zram0 > /dev/null
+mount -o discard /dev/zram0 /mnt/overlay
+if [ ! -f /tmp/mountparts.sh ]; then
+    mkdir -p /mnt/overlay/upper /mnt/overlay/work
+    mount -t overlay -o upperdir=/mnt/overlay/upper,workdir=/mnt/overlay/work,lowerdir=/mnt/remote disklessroot /sysroot
+else
+    for srcmount in $(cat /tmp/mountparts.sh | awk '{print $3}'); do
+        mkdir -p /mnt/overlay${srcmount}/upper /mnt/overlay${srcmount}/work
+        mount -t overlay -o upperdir=/mnt/overlay${srcmount}/upper,workdir=/mnt/overlay${srcmount}/work,lowerdir=${srcmount} disklesspart /sysroot${srcmount#/mnt/remote}
+    done
+fi
+mkdir -p /sysroot/etc/ssh
+mkdir -p /sysroot/etc/confluent
+mkdir -p /sysroot/root/.ssh
+cp /root/.ssh/* /sysroot/root/.ssh
+chmod 700 /sysroot/root/.ssh
+cp /etc/confluent/* /sysroot/etc/confluent/
+cp /etc/ssh/*key* /sysroot/etc/ssh/
+for pubkey in /etc/ssh/ssh_host*key.pub; do
+    certfile=${pubkey/.pub/-cert.pub}
+    privfile=${pubkey%.pub}
+    if [ -s $certfile ]; then
+        echo HostCertificate $certfile >> /sysroot/etc/ssh/sshd_config
+    fi
+    echo HostKey $privfile >> /sysroot/etc/ssh/sshd_config
+done
+
+mkdir -p /sysroot/dev /sysroot/sys /sysroot/proc /sysroot/run
+if [ ! -z "$autocons" ]; then
+    autocons=${autocons%,*}
+    mkdir -p /run/systemd/generator/getty.target.wants
+    ln -s /usr/lib/systemd/system/serial-getty@.service /run/systemd/generator/getty.target.wants/serial-getty@${autocons}.service
+fi
+while [ ! -e /sysroot/sbin/init ]; do
+    echo "Failed to access root filesystem or it is missing /sbin/init"
+    echo "System should be accessible through ssh at port 2222 with the appropriate key"
+    while [ ! -e /sysroot/sbin/init ]; do
+        sleep 1
+    done
+done
+rootpassword=$(grep ^rootpassword: /etc/confluent/confluent.deploycfg)
+rootpassword=${rootpassword#rootpassword: }
+if [ "$rootpassword" = "null" ]; then
+    rootpassword=""
+fi
+
+if [ ! -z "$rootpassword" ]; then
+    sed -i "s@root:[^:]*:@root:$rootpassword:@" /sysroot/etc/shadow
+fi
+for i in /ssh/*.ca; do
+    echo '@cert-authority *' $(cat $i) >> /sysroot/etc/ssh/ssh_known_hosts
+done
+echo HostbasedAuthentication yes >> /sysroot/etc/ssh/sshd_config
+echo HostbasedUsesNameFromPacketOnly yes >> /sysroot/etc/ssh/sshd_config
+echo IgnoreRhosts no >> /sysroot/etc/ssh/sshd_config
+sshconf=/sysroot/etc/ssh/ssh_config
+if [ -d /sysroot/etc/ssh/ssh_config.d/ ]; then
+    sshconf=/sysroot/etc/ssh/ssh_config.d/01-confluent.conf
+fi
+echo 'Host *' >> $sshconf
+echo '    HostbasedAuthentication yes' >> $sshconf
+echo '    EnableSSHKeysign yes' >> $sshconf
+echo '    HostbasedKeyTypes *ed25519*' >> $sshconf
+curl -sf -H "CONFLUENT_NODENAME: $nodename" -H "CONFLUENT_APIKEY: $(cat /etc/confluent/confluent.apikey)" https://$confluent_mgr/confluent-api/self/nodelist > /sysroot/etc/ssh/shosts.equiv
+cp /sysroot/etc/ssh/shosts.equiv /sysroot/root/.shosts
+chmod 640 /sysroot/etc/ssh/*_key
+chroot /sysroot chgrp ssh_keys /etc/ssh/*_key
+cp /tls/*.pem /sysroot/etc/pki/ca-trust/source/anchors/
+chroot /sysroot/ update-ca-trust
+curl -sf https://$confluent_mgr/confluent-public/os/$confluent_profile/scripts/onboot.service > /sysroot/etc/systemd/system/onboot.service
+mkdir -p /sysroot/opt/confluent/bin
+curl -sf https://$confluent_mgr/confluent-public/os/$confluent_profile/scripts/onboot.sh > /sysroot/opt/confluent/bin/onboot.sh
+chmod +x /sysroot/opt/confluent/bin/onboot.sh
+cp /opt/confluent/bin/apiclient /sysroot/opt/confluent/bin
+ln -s /etc/systemd/system/onboot.service /sysroot/etc/systemd/system/multi-user.target.wants/onboot.service
+cp /etc/confluent/functions /sysroot/etc/confluent/functions
+if grep installtodisk /proc/cmdline > /dev/null; then
+    . /etc/confluent/functions
+    run_remote installimage
+    exec reboot -f
+fi
+mv /lib/modules/$(uname -r) /lib/modules/$(uname -r)-ramfs
+ln -s /sysroot/lib/modules/$(uname -r) /lib/modules/
+exec /opt/confluent/bin/start_root

confluent_osdeploy/el7-diskless/profiles/default/scripts/installimage

@@ -0,0 +1,43 @@
+#!/bin/bash
+. /etc/confluent/functions
+# the image will be used to deploy itself
+# provide both access to image (for parsing metadata)
+# and existing mounts of image (to take advantage of caching)
+mount -o bind /sys /sysroot/sys
+mount -o bind /dev /sysroot/dev
+mount -o bind /proc /sysroot/proc
+mount -o bind /run /sysroot/run
+
+
+if [ ! -f /tmp/mountparts.sh ]; then
+    mkdir -p /sysroot/run/imginst/sources/_
+    mount -o bind /mnt/remote /sysroot/run/imginst/sources/_
+else
+    for srcmount in $(cat /tmp/mountparts.sh | awk '{print $2}'); do
+        srcname=${srcmount#/dev/mapper/mproot}
+        srcdir=$(echo $srcmount | sed -e 's!/dev/mapper/mproot!/mnt/remote!' -e 's!_!/!g')
+        mkdir -p /sysroot/run/imginst/sources/$srcname
+        mount -o bind $srcdir /sysroot/run/imginst/sources/$srcname
+    done
+fi
+cd /sysroot/run
+chroot /sysroot/ bash -c "source /etc/confluent/functions; run_remote_python getinstalldisk"
+chroot /sysroot/ bash -c "source /etc/confluent/functions; run_remote_parts pre.d"
+if [ ! -f /sysroot/tmp/installdisk ]; then
+    echo 'Unable to find a suitable installation target device, ssh to port 2222 to investigate'
+    while [ ! -f /sysroot/tmp/installdisk ]; do
+        sleep 1
+    done
+fi
+lvm vgchange -a n
+udevadm control -e
+chroot /sysroot /usr/lib/systemd/systemd-udevd --daemon
+chroot /sysroot bash -c "source /etc/confluent/functions; run_remote_python image2disk.py"
+echo "Port 22" >> /etc/ssh/sshd_config
+echo 'Match LocalPort 22' >> /etc/ssh/sshd_config
+echo '    ChrootDirectory /sysroot/run/imginst/targ' >> /etc/ssh/sshd_config
+kill -HUP $(cat /run/sshd.pid)
+
+chroot /sysroot/run/imginst/targ bash -c "source /etc/confluent/functions; run_remote post.sh"
+chroot /sysroot bash -c "umount \$(tac /proc/mounts|awk '{print \$2}'|grep ^/run/imginst/targ)"
+

confluent_osdeploy/el7-diskless/profiles/default/scripts/onboot.service

@@ -0,0 +1,11 @@
+[Unit]
+Description=Confluent onboot hook
+Requires=network-online.target
+After=network-online.target
+
+[Service]
+ExecStart=/opt/confluent/bin/onboot.sh
+
+[Install]
+WantedBy=multi-user.target
+

confluent_osdeploy/el7-diskless/profiles/default/scripts/onboot.sh

@@ -0,0 +1,33 @@
+#!/bin/sh
+
+# This script is executed on each boot as it is
+# completed. It is best to edit the middle of the file as
+# noted below so custom commands are executed before
+# the script notifies confluent that install is fully complete.
+
+nodename=$(grep ^NODENAME /etc/confluent/confluent.info|awk '{print $2}')
+confluent_apikey=$(cat /etc/confluent/confluent.apikey)
+confluent_mgr=$(grep ^deploy_server: /etc/confluent/confluent.deploycfg|awk '{print $2}')
+confluent_profile=$(grep ^profile: /etc/confluent/confluent.deploycfg|awk '{print $2}')
+export nodename confluent_mgr confluent_profile
+. /etc/confluent/functions
+mkdir -p /var/log/confluent
+chmod 700 /var/log/confluent
+exec >> /var/log/confluent/confluent-onboot.log
+exec 2>> /var/log/confluent/confluent-onboot.log
+chmod 600 /var/log/confluent/confluent-onboot.log
+tail -f /var/log/confluent/confluent-onboot.log > /dev/console &
+logshowpid=$!
+
+run_remote_python syncfileclient
+run_remote_python confignet
+
+run_remote onboot.custom
+# onboot scripts may be placed into onboot.d, e.g. onboot.d/01-firstaction.sh, onboot.d/02-secondaction.sh
+run_remote_parts onboot.d
+
+# Induce execution of remote configuration, e.g. ansible plays in ansible/onboot.d/
+run_remote_config onboot.d
+
+#curl -X POST -d 'status: booted' -H "CONFLUENT_NODENAME: $nodename" -H "CONFLUENT_APIKEY: $confluent_apikey" https://$confluent_mgr/confluent-api/self/updatestatus
+kill $logshowpid

confluent_osdeploy/el7-diskless/profiles/default/scripts/post.sh

@@ -0,0 +1,39 @@
+#!/bin/sh
+
+# This script is executed 'chrooted' into a cloned disk target before rebooting
+#
+
+nodename=$(grep ^NODENAME /etc/confluent/confluent.info|awk '{print $2}')
+confluent_apikey=$(cat /etc/confluent/confluent.apikey)
+confluent_mgr=$(grep ^deploy_server: /etc/confluent/confluent.deploycfg|awk '{print $2}')
+confluent_profile=$(grep ^profile: /etc/confluent/confluent.deploycfg|awk '{print $2}')
+export nodename confluent_mgr confluent_profile
+. /etc/confluent/functions
+mkdir -p /var/log/confluent
+chmod 700 /var/log/confluent
+exec >> /var/log/confluent/confluent-post.log
+exec 2>> /var/log/confluent/confluent-post.log
+chmod 600 /var/log/confluent/confluent-post.log
+tail -f /var/log/confluent/confluent-post.log > /dev/console &
+logshowpid=$!
+curl -f https://$confluent_mgr/confluent-public/os/$confluent_profile/scripts/firstboot.service > /etc/systemd/system/firstboot.service
+mkdir -p /opt/confluent/bin
+curl -f https://$confluent_mgr/confluent-public/os/$confluent_profile/scripts/firstboot.sh > /opt/confluent/bin/firstboot.sh
+chmod +x /opt/confluent/bin/firstboot.sh
+systemctl enable firstboot
+selinuxpolicy=$(grep ^SELINUXTYPE /etc/selinux/config |awk -F= '{print $2}')
+if [ ! -z "$selinuxpolicy" ]; then
+    setfiles /etc/selinux/${selinuxpolicy}/contexts/files/file_contexts /etc/
+fi
+run_remote_python syncfileclient
+run_remote post.custom
+# post scripts may be placed into post.d, e.g. post.d/01-firstaction.sh, post.d/02-secondaction.sh
+run_remote_parts post.d
+
+# Induce execution of remote configuration, e.g. ansible plays in ansible/post.d/
+run_remote_config post.d
+
+curl -sf -X POST -d 'status: staged' -H "CONFLUENT_NODENAME: $nodename" -H "CONFLUENT_APIKEY: $confluent_apikey" https://$confluent_mgr/confluent-api/self/updatestatus
+
+kill $logshowpid
+

confluent_osdeploy/el7-diskless/profiles/default/scripts/syncfileclient

@@ -0,0 +1,279 @@
+#!/usr/bin/python
+import importlib
+import tempfile
+import json
+import os
+import shutil
+import pwd
+import grp
+try:
+    from importlib.machinery import SourceFileLoader
+    def load_source(mod, path):
+        return SourceFileLoader(mod, path).load_module()
+except ImportError:
+    from imp import load_source
+
+try:
+    apiclient = load_source('apiclient', '/opt/confluent/bin/apiclient')
+except IOError:
+    apiclient = load_source('apiclient', '/etc/confluent/apiclient')
+
+
+
+def partitionhostsline(line):
+    comment = ''
+    try:
+        cmdidx = line.index('#')
+        comment = line[cmdidx:]
+        line = line[:cmdidx].strip()
+    except ValueError:
+        pass
+    if not line:
+        return '', [], comment
+    ipaddr, names = line.split(maxsplit=1)
+    names = names.split()
+    return ipaddr, names, comment
+
+class HostMerger(object):
+    def __init__(self):
+        self.byip = {}
+        self.byname = {}
+        self.sourcelines = []
+        self.targlines = []
+
+    def read_source(self, sourcefile):
+        with open(sourcefile, 'r') as hfile:
+            self.sourcelines = hfile.read().split('\n')
+        while not self.sourcelines[-1]:
+            self.sourcelines = self.sourcelines[:-1]
+        for x in range(len(self.sourcelines)):
+            line = self.sourcelines[x]
+            currip, names, comment = partitionhostsline(line)
+            if currip:
+                self.byip[currip] = x
+            for name in names:
+                self.byname[name] = x
+
+    def read_target(self, targetfile):
+        with open(targetfile, 'r') as hfile:
+            lines = hfile.read().split('\n')
+            if not lines[-1]:
+                lines = lines[:-1]
+            for y in range(len(lines)):
+                line = lines[y]
+                currip, names, comment = partitionhostsline(line)
+                if currip in self.byip:
+                    x = self.byip[currip]
+                    if self.sourcelines[x] is None:
+                        # have already consumed this enntry
+                        continue
+                    self.targlines.append(self.sourcelines[x])
+                    self.sourcelines[x] = None
+                    continue
+                for name in names:
+                    if name in self.byname:
+                        x = self.byname[name]
+                        if self.sourcelines[x] is None:
+                            break
+                        self.targlines.append(self.sourcelines[x])
+                        self.sourcelines[x] = None
+                        break
+                else:
+                    self.targlines.append(line)
+
+    def write_out(self, targetfile):
+        while not self.targlines[-1]:
+            self.targlines = self.targlines[:-1]
+            if not self.targlines:
+                break
+        while not self.sourcelines[-1]:
+            self.sourcelines = self.sourcelines[:-1]
+            if not self.sourcelines:
+                break
+        with open(targetfile, 'w') as hosts:
+            for line in self.targlines:
+                hosts.write(line + '\n')
+            for line in self.sourcelines:
+                if line is not None:
+                    hosts.write(line + '\n')
+
+
+class CredMerger:
+    def __init__(self):
+        try:
+            with open('/etc/login.defs', 'r') as ldefs:
+                defs = ldefs.read().split('\n')
+        except FileNotFoundError:
+            defs = []
+        lkup = {}
+        self.discardnames = {}
+        self.shadowednames = {}
+        for line in defs:
+            try:
+                line = line[:line.index('#')]
+            except ValueError:
+                pass
+            keyval = line.split()
+            if len(keyval) < 2:
+                continue
+            lkup[keyval[0]] = keyval[1]
+        self.uidmin = int(lkup.get('UID_MIN', 1000))
+        self.uidmax = int(lkup.get('UID_MAX', 60000))
+        self.gidmin = int(lkup.get('GID_MIN', 1000))
+        self.gidmax = int(lkup.get('GID_MAX', 60000))
+        self.shadowlines = None
+
+    def read_passwd(self, source, targfile=False):
+        self.read_generic(source, self.uidmin, self.uidmax, targfile)
+
+    def read_group(self, source, targfile=False):
+        self.read_generic(source, self.gidmin, self.gidmax, targfile)
+
+    def read_generic(self, source, minid, maxid, targfile):
+        if targfile:
+            self.targdata = []
+        else:
+            self.sourcedata = []
+        with open(source, 'r') as inputfile:
+            for line in inputfile.read().split('\n'):
+                try:
+                    name, _, uid, _ = line.split(':', 3)
+                    uid = int(uid)
+                except ValueError:
+                    continue
+                if targfile:
+                    if uid < minid or uid > maxid:
+                        self.targdata.append(line)
+                    else:
+                        self.discardnames[name] = 1
+                else:
+                    if name[0] in ('+', '#', '@'):
+                        self.sourcedata.append(line)
+                    elif uid >= minid and uid <= maxid:
+                        self.sourcedata.append(line)
+
+    def read_shadow(self, source):
+        self.shadowlines = []
+        try:
+            with open(source, 'r') as inshadow:
+                for line in inshadow.read().split('\n'):
+                    try:
+                        name, _ = line.split(':' , 1)
+                    except ValueError:
+                        continue
+                    if name in self.discardnames:
+                        continue
+                    self.shadowednames[name] = 1
+                    self.shadowlines.append(line)
+        except FileNotFoundError:
+            return
+
+    def write_out(self, outfile):
+        with open(outfile, 'w') as targ:
+            for line in self.targdata:
+                targ.write(line + '\n')
+            for line in self.sourcedata:
+                targ.write(line + '\n')
+        if outfile == '/etc/passwd':
+            if self.shadowlines is None:
+                self.read_shadow('/etc/shadow')
+            with open('/etc/shadow', 'w') as shadout:
+                for line in self.shadowlines:
+                    shadout.write(line + '\n')
+                for line in self.sourcedata:
+                    name, _ = line.split(':', 1)
+                    if name[0] in ('+', '#', '@'):
+                        continue
+                    if name in self.shadowednames:
+                        continue
+                    shadout.write(name + ':!:::::::\n')
+        if outfile == '/etc/group':
+            if self.shadowlines is None:
+                self.read_shadow('/etc/gshadow')
+            with open('/etc/gshadow', 'w') as shadout:
+                for line in self.shadowlines:
+                    shadout.write(line + '\n')
+                for line in self.sourcedata:
+                    name, _ = line.split(':' , 1)
+                    if name in self.shadowednames:
+                        continue
+                    shadout.write(name + ':!::\n')
+
+def appendonce(basepath, filename):
+    with open(filename, 'rb') as filehdl:
+        thedata = filehdl.read()
+    targname = filename.replace(basepath, '')
+    try:
+        with open(targname, 'rb') as filehdl:
+            targdata = filehdl.read()
+    except IOError:
+        targdata = b''
+    if thedata in targdata:
+        return
+    with open(targname, 'ab') as targhdl:
+        targhdl.write(thedata)
+
+def synchronize():
+    tmpdir = tempfile.mkdtemp()
+    appendoncedir = tempfile.mkdtemp()
+    try:
+        ac = apiclient.HTTPSClient()
+        data = json.dumps({'merge': tmpdir, 'appendonce': appendoncedir})
+        status, rsp = ac.grab_url_with_status('/confluent-api/self/remotesyncfiles', data)
+        if status == 202:
+            lastrsp = ''
+            while status != 204:
+                status, rsp = ac.grab_url_with_status('/confluent-api/self/remotesyncfiles')
+                if not isinstance(rsp, str):
+                    rsp = rsp.decode('utf8')
+                if status == 200:
+                    lastrsp = rsp
+            pendpasswd = os.path.join(tmpdir, 'etc/passwd')
+            if os.path.exists(pendpasswd):
+                cm = CredMerger()
+                cm.read_passwd(pendpasswd, targfile=False)
+                cm.read_passwd('/etc/passwd', targfile=True)
+                cm.write_out('/etc/passwd')
+            pendgroup = os.path.join(tmpdir, 'etc/group')
+            if os.path.exists(pendgroup):
+                cm = CredMerger()
+                cm.read_group(pendgroup, targfile=False)
+                cm.read_group('/etc/group', targfile=True)
+                cm.write_out('/etc/group')
+            pendhosts = os.path.join(tmpdir, 'etc/hosts')
+            if os.path.exists(pendhosts):
+                cm = HostMerger()
+                cm.read_source(pendhosts)
+                cm.read_target('/etc/hosts')
+                cm.write_out('/etc/hosts')
+            for dirn in os.walk(appendoncedir):
+                for filen in dirn[2]:
+                    appendonce(appendoncedir, os.path.join(dirn[0], filen))
+            if lastrsp:
+                lastrsp = json.loads(lastrsp)
+                opts = lastrsp.get('options', {})
+                for fname in opts:
+                    uid = -1
+                    gid = -1
+                    for opt in opts[fname]:
+                        if opt == 'owner':
+                            try:
+                                uid = pwd.getpwnam(opts[fname][opt]['name']).pw_uid
+                            except KeyError:
+                                uid = opts[fname][opt]['id']
+                        elif opt == 'group':
+                            try:
+                                gid = grp.getgrnam(opts[fname][opt]['name']).gr_gid
+                            except KeyError:
+                                gid = opts[fname][opt]['id']
+                        elif opt == 'permissions':
+                            os.chmod(fname, int(opts[fname][opt], 8))
+                    if uid != -1 or gid != -1:
+                        os.chown(fname, uid, gid)
+    finally:
+        shutil.rmtree(tmpdir)
+        shutil.rmtree(appendoncedir)
+
+
+if __name__ == '__main__':
+    synchronize()

confluent_osdeploy/el7-diskless/profiles/default/syncfiles

@@ -0,0 +1,29 @@
+# It is advised to avoid /var/lib/confluent/public as a source for syncing.  /var/lib/confluent/public
+# is served without authentication and thus any sensitive content would be a risk. If wanting to host
+# syncfiles on a common share, it is suggested to have /var/lib/confluent be the share and use some other
+# subdirectory other than public.
+#
+# Syncing is performed as the 'confluent' user, so all source files must be accessible by the confluent user.
+#
+# This file lists files to synchronize or merge to the deployed systems from the deployment server
+# To specify taking /some/path/hosts on the deployment server and duplicating it to /etc/hosts:
+# Note particularly the use of '->' to delineate source from target.
+# /some/path/hosts -> /etc/hosts
+
+# If wanting to simply use the same path for source and destinaiton, the -> may be skipped:
+# /etc/hosts
+
+# More function is available, for example to limit the entry to run only on n1 through n8, and to set
+# owner, group, and permissions in octal notation:
+# /example/source -> n1-n8:/etc/target (owner=root,group=root,permissions=600)
+
+# Entries under APPENDONCE: will be added to specified target, only if the target does not already
+# contain the data in the source already in its entirety. This allows append in a fashion that
+# is friendly to being run repeatedly
+
+# Entries under MERGE: will attempt to be intelligently merged. This supports /etc/group and /etc/passwd
+# Any supporting entries in /etc/shadow or /etc/gshadow are added automatically, with password disabled
+# It also will not inject 'system' ids (under 1,000 usually) as those tend to be local and rpm managed.
+MERGE:
+# /etc/passwd
+# /etc/group

confluent_osdeploy/el7/initramfs/usr/lib/dracut/hooks/pre-pivot/01-confluent.sh

@@ -12,10 +12,11 @@ sed -i 's/install::/install:*:/' /sysroot/etc/shadow
 sed -i 's/root::/root:*:/' /sysroot/etc/shadow
 mkdir -p /sysroot/root/.ssh
 #chmod 700 /sysroot/root/.ssh
-cat /ssh/*.rootpubkey > /sysroot/root/.ssh/authorized_keys
+cat /ssh/*pubkey > /sysroot/root/.ssh/authorized_keys
 #chmod 600 /sysroot/root/.ssh/authorized_keys
 mkdir -p /sysroot/etc/ssh/
 for i in /ssh/*.ca; do
     echo '@cert-authority *' $(cat $i) >> /sysroot/etc/ssh/ssh_known_hosts
 done
-cp /opt/confluent/bin/apiclient /sysroot/etc/confluent
+mkdir -p /sysroot/opt/confluent/bin
+cp /opt/confluent/bin/apiclient /sysroot/opt/confluent/bin

confluent_osdeploy/el7/profiles/default/ansible/firstboot.d/README.txt

@@ -0,0 +1,25 @@
+Ansible playbooks ending in .yml or .yaml that are placed into this directory will be executed at the
+appropriate phase of the install process.
+
+The 'hosts' may be omitted, and if included will be ignored, replaced with the host that is specifically
+requesting the playbooks be executed.
+
+Also, the playbooks will be executed on the deployment server. Hence it may be slower in aggregate than
+running content under scripts/ which ask much less of the deployment server
+
+Here is an example of what a playbook would look like broadly:
+
+- name: Example
+  gather_facts: no
+  tasks:
+       - name: Example1
+         lineinfile:
+           path: /etc/hosts
+           line: 1.2.3.4 test1
+           create: yes
+       - name: Example2
+         lineinfile:
+           path: /etc/hosts
+           line: 1.2.3.5 test2
+           create: yes
+

confluent_osdeploy/el7/profiles/default/ansible/post.d/README.txt

@@ -0,0 +1,25 @@
+Ansible playbooks ending in .yml or .yaml that are placed into this directory will be executed at the
+appropriate phase of the install process.
+
+The 'hosts' may be omitted, and if included will be ignored, replaced with the host that is specifically
+requesting the playbooks be executed.
+
+Also, the playbooks will be executed on the deployment server. Hence it may be slower in aggregate than
+running content under scripts/ which ask much less of the deployment server
+
+Here is an example of what a playbook would look like broadly:
+
+- name: Example
+  gather_facts: no
+  tasks:
+       - name: Example1
+         lineinfile:
+           path: /etc/hosts
+           line: 1.2.3.4 test1
+           create: yes
+       - name: Example2
+         lineinfile:
+           path: /etc/hosts
+           line: 1.2.3.5 test2
+           create: yes
+

confluent_osdeploy/el7/profiles/default/initprofile.sh

@@ -1,5 +1,5 @@
 #!/bin/sh
-sed -i 's/centos/CentOS/; s/rhel/Red Hat Enterprise Linux/' $2/profile.yaml
+sed -i 's/centos/CentOS/; s/rhel/Red Hat Enterprise Linux/; s/oraclelinux/Oracle Linux/; s/alma/AlmaLinux/' $2/profile.yaml
 ln -s $1/images/pxeboot/vmlinuz $2/boot/kernel && \
 ln -s $1/images/pxeboot/initrd.img $2/boot/initramfs/distribution
 mkdir -p $2/boot/efi/boot && \

confluent_osdeploy/el7/profiles/default/kickstart

@@ -33,12 +33,16 @@
 reboot
 
 %packages
+#-kernel-uek # This can opt out of the UEK for the relevant distribution
 chrony
-rsync
+pciutils
 python
+rsync
+tar
+-iwl*-firmware
+%include /tmp/addonpackages
 %end
 
-
 # A kickstart.custom file is provided to enable easily adding
 # kickstart content without modifying the stock file.
 # While the stock file may be safely modified, using the .custom
@@ -47,32 +51,33 @@ python
 %include /tmp/kickstart.custom
 
 %pre
-profile=$(grep ^profile: /etc/confluent/confluent.deploycfg |awk '{print $2}')
-mgr=$(grep deploy_server /etc/confluent/confluent.deploycfg |awk '{print $2}')
-curl -f https://$mgr/confluent-public/os/$profile/scripts/pre.sh > /tmp/preinst.sh
+confluent_profile=$(grep ^profile: /etc/confluent/confluent.deploycfg |awk '{print $2}')
+confluent_mgr=$(grep ^deploy_server: /etc/confluent/confluent.deploycfg |awk '{print $2}')
+curl -f https://$confluent_mgr/confluent-public/os/$confluent_profile/scripts/pre.sh > /tmp/preinst.sh
 . /tmp/preinst.sh
 %end
 
 %post --nochroot
 mkdir -p /mnt/sysimage/etc/confluent
-profile=$(grep ^profile: /etc/confluent/confluent.deploycfg |awk '{print $2}')
-mgr=$(grep deploy_server /etc/confluent/confluent.deploycfg |awk '{print $2}')
-curl -f https://$mgr/confluent-public/os/$profile/scripts/prechroot.sh > /tmp/postinst.sh
+confluent_profile=$(grep ^profile: /etc/confluent/confluent.deploycfg |awk '{print $2}')
+confluent_mgr=$(grep ^deploy_server: /etc/confluent/confluent.deploycfg |awk '{print $2}')
+curl -f https://$confluent_mgr/confluent-public/os/$confluent_profile/scripts/prechroot.sh > /tmp/postinst.sh
 . /tmp/postinst.sh
 
 # Hook firstboot.sh
-curl -f https://$mgr/confluent-public/os/$profile/scripts/firstboot.service > /mnt/sysimage/etc/systemd/system/firstboot.service
-curl -f https://$mgr/confluent-public/os/$profile/scripts/firstboot.sh > /mnt/sysimage/etc/confluent/firstboot.sh
-chmod +x /mnt/sysimage/etc/confluent/firstboot.sh
+curl -f https://$confluent_mgr/confluent-public/os/$confluent_profile/scripts/firstboot.service > /mnt/sysimage/etc/systemd/system/firstboot.service
+mkdir -p /mnt/sysimage/opt/confluent/bin
+curl -f https://$confluent_mgr/confluent-public/os/$confluent_profile/scripts/firstboot.sh > /mnt/sysimage/opt/confluent/bin/firstboot.sh
+chmod +x /mnt/sysimage/opt/confluent/bin/firstboot.sh
 %end
 
 %post
 cat /etc/confluent/tls/*.pem >> /etc/pki/tls/certs/ca-bundle.crt
 systemctl enable firstboot
 chgrp ssh_keys /etc/ssh/ssh*key
-restorecon /etc/ssh/ssh*key /root/.shosts /etc/ssh/shosts.equiv /etc/ssh/ssh_config.d/* /etc/confluent/firstboot.sh
-profile=$(grep ^profile: /etc/confluent/confluent.deploycfg |awk '{print $2}')
-mgr=$(grep deploy_server /etc/confluent/confluent.deploycfg |awk '{print $2}')
-curl -f https://$mgr/confluent-public/os/$profile/scripts/post.sh > /tmp/postinst.sh
+restorecon /etc/ssh/ssh*key /root/.shosts /etc/ssh/shosts.equiv /etc/ssh/ssh_config.d/* /opt/confluent/bin/firstboot.sh
+confluent_profile=$(grep ^profile: /etc/confluent/confluent.deploycfg |awk '{print $2}')
+confluent_mgr=$(grep ^deploy_server: /etc/confluent/confluent.deploycfg |awk '{print $2}')
+curl -f https://$confluent_mgr/confluent-public/os/$confluent_profile/scripts/post.sh > /tmp/postinst.sh
 . /tmp/postinst.sh
 %end

confluent_osdeploy/el7/profiles/default/profile.yaml

@@ -1,2 +1,3 @@
 label: %%DISTRO%% %%VERSION%% %%ARCH%% (Default Profile)
-kernelargs: quiet
+kernelargs: quiet  # These arguments are passed to the installer
+#installedargs: example # These arguments would be added to the installed system

confluent_osdeploy/el7/profiles/default/scripts/configbmc

@@ -0,0 +1,414 @@
+# Copyright 2017 Lenovo
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import argparse
+import ctypes
+import fcntl
+import json
+from select import select
+import socket
+import struct
+import os
+import subprocess
+import sys
+import time
+
+if os.path.exists('/opt/confluent/bin/apiclient'):
+    apiclient = '/opt/confluent/bin/apiclient'
+elif os.path.exists('/etc/confluent/apiclient'):
+    apiclient = '/etc/confluent/apiclient'
+
+class IpmiMsg(ctypes.Structure):
+    _fields_ = [('netfn', ctypes.c_ubyte),
+                ('cmd', ctypes.c_ubyte),
+                ('data_len', ctypes.c_short),
+                ('data', ctypes.POINTER(ctypes.c_ubyte))]
+
+
+class IpmiSystemInterfaceAddr(ctypes.Structure):
+    _fields_ = [('addr_type', ctypes.c_int),
+                ('channel', ctypes.c_short),
+                ('lun', ctypes.c_ubyte)]
+
+
+class IpmiRecv(ctypes.Structure):
+    _fields_ = [('recv_type', ctypes.c_int),
+                ('addr', ctypes.POINTER(IpmiSystemInterfaceAddr)),
+                ('addr_len', ctypes.c_uint),
+                ('msgid', ctypes.c_long),
+                ('msg', IpmiMsg)]
+
+
+class IpmiReq(ctypes.Structure):
+    _fields_ = [('addr', ctypes.POINTER(IpmiSystemInterfaceAddr)),
+                ('addr_len', ctypes.c_uint),
+                ('msgid', ctypes.c_long),
+                ('msg', IpmiMsg)]
+
+
+_IONONE = 0
+_IOWRITE = 1
+_IOREAD = 2
+IPMICTL_SET_MY_ADDRESS_CMD = (
+    _IOREAD << 30 | ctypes.sizeof(ctypes.c_uint) << 16
+    | ord('i') << 8 | 17)  # from ipmi.h
+IPMICTL_SEND_COMMAND = (
+    _IOREAD << 30 | ctypes.sizeof(IpmiReq) << 16
+    | ord('i') << 8 | 13)  # from ipmi.h
+# next is really IPMICTL_RECEIVE_MSG_TRUNC, but will only use that
+IPMICTL_RECV = (
+    (_IOWRITE | _IOREAD) << 30 | ctypes.sizeof(IpmiRecv) << 16
+    | ord('i') << 8 | 11)  # from ipmi.h
+BMC_SLAVE_ADDR = ctypes.c_uint(0x20)
+CURRCHAN = 0xf
+ADDRTYPE = 0xc
+
+
+class Session(object):
+    def __init__(self, devnode='/dev/ipmi0'):
+        """Create a local session inband
+
+        :param: devnode: The path to the ipmi device
+        """
+        self.ipmidev = open(devnode, 'r+')
+        fcntl.ioctl(self.ipmidev, IPMICTL_SET_MY_ADDRESS_CMD, BMC_SLAVE_ADDR)
+        # the interface is initted, create some reusable memory for our session
+        self.databuffer = ctypes.create_string_buffer(4096)
+        self.req = IpmiReq()
+        self.rsp = IpmiRecv()
+        self.addr = IpmiSystemInterfaceAddr()
+        self.req.msg.data = ctypes.cast(
+            ctypes.addressof(self.databuffer),
+            ctypes.POINTER(ctypes.c_ubyte))
+        self.rsp.msg.data = self.req.msg.data
+        self.userid = None
+        self.password = None
+
+    def await_reply(self):
+        rd, _, _ = select((self.ipmidev,), (), (), 1)
+        while not rd:
+            rd, _, _ = select((self.ipmidev,), (), (), 1)
+
+    def pause(self, seconds):
+        time.sleep(seconds)
+
+    @property
+    def parsed_rsp(self):
+        response = {'netfn': self.rsp.msg.netfn, 'command': self.rsp.msg.cmd,
+                    'code': bytearray(self.databuffer.raw)[0],
+                    'data': bytearray(
+                        self.databuffer.raw[1:self.rsp.msg.data_len])}
+        return response
+
+    def await_config(s, bmccfg, channel):
+        vlan = bmccfg.get('bmcvlan', None)
+        ipv4 = bmccfg.get('bmcipv4', None)
+        prefix = bmccfg.get('prefixv4', None)
+        gw = bmccfg.get('bmcgw', None)
+
+
+
+    def raw_command(self,
+                    netfn,
+                    command,
+                    data=(),
+                    bridge_request=None,
+                    retry=True,
+                    delay_xmit=None,
+                    timeout=None,
+                    waitall=False, rslun=0):
+        self.addr.channel = CURRCHAN
+        self.addr.addr_type = ADDRTYPE
+        self.addr.lun = rslun
+        self.req.addr_len = ctypes.sizeof(IpmiSystemInterfaceAddr)
+        self.req.addr = ctypes.pointer(self.addr)
+        self.req.msg.netfn = netfn
+        self.req.msg.cmd = command
+        if data:
+            data = memoryview(bytearray(data))
+            try:
+                self.databuffer[:len(data)] = data[:len(data)]
+            except ValueError:
+                self.databuffer[:len(data)] = data[:len(data)].tobytes()
+        self.req.msg.data_len = len(data)
+        fcntl.ioctl(self.ipmidev, IPMICTL_SEND_COMMAND, self.req)
+        self.await_reply()
+        self.rsp.msg.data_len = 4096
+        self.rsp.addr = ctypes.pointer(self.addr)
+        self.rsp.addr_len = ctypes.sizeof(IpmiSystemInterfaceAddr)
+        fcntl.ioctl(self.ipmidev, IPMICTL_RECV, self.rsp)
+        return self.parsed_rsp
+
+
+def _is_tsm(model):
+    return model in ('7y00', '7z01', '7y98', '7y99')
+
+def set_port(s, port, vendor, model):
+    oport = port
+    if vendor not in ('IBM', 'Lenovo'):
+        raise Exception('{0} not implemented'.format(vendor))
+    if _is_tsm(model):
+        return set_port_tsm(s, port, model)
+    else:
+        set_port_xcc(s, port, model)
+        return 1
+
+
+def set_port_tsm(s, port, model):
+    oport = port
+    sys.stdout.write('Setting TSM port to "{}"...'.format(oport))
+    sys.stdout.flush()
+    if port == 'ocp':
+        s.raw_command(0x32, 0x71, b'\x00\x01\x00')
+    elif port == 'dedicated':
+        s.raw_command(0x32, 0x71, b'\x00\x00\x00')
+    else:
+        raise Exception("Unsupported port for TSM")
+    timer = 15
+    while timer:
+        timer = timer - 1
+        time.sleep(1.0)
+        sys.stdout.write('.')
+        sys.stdout.flush()
+    if port == 'ocp':
+        iface = 0
+        s.raw_command(0x32, 0x71, b'\x00\x00\x03')
+    elif port == 'dedicated':
+        iface = 1
+        s.raw_command(0x32, 0x71, b'\x00\x01\x03')
+    rsp = s.raw_command(0x32, 0x72, bytearray([4, iface, 0]))
+    print('Complete')
+    return int(rsp['data'][0])
+
+
+def set_port_xcc(s, port, model):
+    oport = port
+    if port.lower() == 'dedicated':
+        port = b'\x01'
+    elif port.lower() in ('ml2', 'ocp'):
+        port = b'\x02\x00'
+    elif port.lower() == 'lom':
+        if model == '7x58':
+            port = b'\x00\x02'
+        else:
+            port = b'\x00\x00'
+    else:
+        port = port.split(' ')
+        port = bytes(bytearray([int(x) for x in port]))
+    currport = bytes(s.raw_command(0xc, 2, b'\x01\xc0\x00\x00')['data'][1:])
+    if port == currport:
+        sys.stdout.write('XCC port already set to "{}"\n'.format(oport))
+        return
+    sys.stdout.write('Setting XCC port to "{}"...'.format(oport))
+    sys.stdout.flush()
+    s.raw_command(0xc, 1, b'\x01\xc0' + port)
+    tries = 60
+    while currport != port and tries:
+        tries -= 1
+        time.sleep(0.5)
+        sys.stdout.write('.')
+        sys.stdout.flush()
+        currport = bytes(s.raw_command(0xc, 2, b'\x01\xc0\x00\x00')['data'][1:])
+    if not tries:
+        raise Exception('Timeout attempting to set port')
+    sys.stdout.write('Complete\n')
+
+
+def check_vlan(s, vlan, channel):
+    if vlan == 'off':
+        vlan = b'\x00\x00'
+    else:
+        vlan = int(vlan)
+        if vlan:
+            vlan = vlan | 32768
+        vlan = struct.pack('<H', vlan)
+    currvlan = bytes(s.raw_command(0xc, 2, bytearray([channel, 0x14 ,0, 0]))['data'][1:])
+    if bytearray(currvlan)[1] & 0b10000000 == 0:
+        currvlan = b'\x00\x00'
+    return currvlan == vlan
+
+
+def set_vlan(s, vlan, channel):
+    ovlan = vlan
+    if vlan == 'off':
+        vlan = b'\x00\x00'
+    else:
+        vlan = int(vlan)
+        if vlan:
+            vlan = vlan | 32768
+        vlan = struct.pack('<H', vlan)
+    if check_vlan(s, ovlan, channel):
+        sys.stdout.write('VLAN already configured to "{0}"\n'.format(ovlan))
+        return False
+    rsp = s.raw_command(0xc, 1, bytearray([channel, 0x14]) + vlan)
+    if rsp.get('code', 1) == 0:
+        print('VLAN configured to "{}"'.format(ovlan))
+    else:
+        print('Error setting vlan: ' + repr(rsp))
+    return True
+
+
+def get_lan_channel(s):
+    for chan in range(1, 16):
+        rsp = s.raw_command(6, 0x42, bytearray([chan]))['data']
+        if not rsp:
+            continue
+        medtype = int(rsp[1]) & 0b1111111
+        if medtype not in (4, 6):
+            continue
+        rsp = s.raw_command(0xc, 2, bytearray([chan, 5, 0, 0]))
+        if rsp.get('code', 1) == 0:
+            return chan
+    return 1
+
+
+def check_ipv4(s, ipaddr, channel):
+    ipaddr = bytearray(socket.inet_aton(ipaddr))
+    rsp = s.raw_command(0xc, 2, bytearray([channel, 3, 0, 0]))['data'][-4:]
+    return rsp == ipaddr
+
+def set_ipv4(s, ipaddr, channel):
+    oipaddr = ipaddr
+    ipaddr = bytearray(socket.inet_aton(ipaddr))
+    if check_ipv4(s, oipaddr, channel):
+        print('IP Address already set to {}'.format(oipaddr))
+        return False
+    rsp = int(s.raw_command(0xc, 2, bytearray([channel, 4, 0, 0]))['data'][1]) & 0b1111
+    if rsp != 1:
+        sys.stdout.write("Changing configuration to static...")
+        sys.stdout.flush()
+        resp = s.raw_command(0xc, 1, bytearray([channel, 4, 1]))
+        tries = 0
+        while rsp != 1 and tries < 30:
+            sys.stdout.write('.')
+            sys.stdout.flush()
+            tries += 1
+            time.sleep(0.5)
+            rsp = int(s.raw_command(0xc, 2, bytearray([channel, 4, 0, 0]))['data'][1]) & 0b1111
+        sys.stdout.write('Complete\n')
+        sys.stdout.flush()
+    print('Setting IP to {}'.format(oipaddr))
+    s.raw_command(0xc, 1, bytearray([channel, 3]) + ipaddr)
+    return True
+
+
+def check_subnet(s, prefix, channel):
+    prefix = int(prefix)
+    mask = bytearray(struct.pack('!I', (2**32 - 1) ^ (2**(32 - prefix) - 1)))
+    rsp = s.raw_command(0xc, 2, bytearray([channel, 6, 0, 0]))['data'][-4:]
+    return rsp == mask
+
+def set_subnet(s, prefix, channel):
+    oprefix = prefix
+    prefix = int(prefix)
+    mask = bytearray(struct.pack('!I', (2**32 - 1) ^ (2**(32 - prefix) - 1)))
+    if check_subnet(s, prefix, channel):
+        print('Subnet Mask already set to /{}'.format(oprefix))
+        return False
+    print('Setting subnet mask to /{}'.format(oprefix))
+    s.raw_command(0xc, 1, bytearray([channel, 6]) + mask)
+    return True
+
+
+def check_gateway(s, gw, channel):
+    gw = bytearray(socket.inet_aton(gw))
+    rsp = s.raw_command(0xc, 2, bytearray([channel, 12, 0, 0]))['data'][-4:]
+    return rsp == gw
+
+def set_gateway(s, gw, channel):
+    ogw = gw
+    gw = bytearray(socket.inet_aton(gw))
+    rsp = s.raw_command(0xc, 2, bytearray([channel, 12, 0, 0]))['data'][-4:]
+    if check_gateway(s, ogw, channel):
+        print('Gateway already set to {}'.format(ogw))
+        return False
+    print('Setting gateway to {}'.format(ogw))
+    s.raw_command(0xc, 1, bytearray([channel, 12]) + gw)
+    return True
+
+def dotwait():
+    sys.stdout.write('.')
+    sys.stdout.flush()
+    time.sleep(0.5)
+
+def main():
+    a = argparse.ArgumentParser(description='Locally configure a BMC device')
+    a.add_argument('-v', help='vlan id or off to disable vlan tagging')
+    a.add_argument('-p', help='Which port to use (dedicated, lom, ocp, ml2)')
+    a.add_argument('-i', help='JSON configuration file to read for '
+                   'configuration')
+    a.add_argument('-c', help='Use Confluent API to direct BMC configuration',
+                   action='store_true')
+    args = a.parse_args()
+    if args.i:
+        bmccfg = json.load(open(args.i))
+    elif args.c:
+        bmccfgsrc = subprocess.check_output(
+            [sys.executable, apiclient, '/confluent-api/self/bmcconfig', '-j'])
+        bmccfg = json.loads(bmccfgsrc)
+    else:
+        bmccfg = {}
+    if args.p is not None:
+        bmccfg['bmcport'] = args.p
+    if args.v is not None:
+        bmccfg['bmcvlan'] = args.v
+    vendor = open('/sys/devices/virtual/dmi/id/sys_vendor').read()
+    vendor = vendor.strip()
+    try:
+        model = open('/sys/devices/virtual/dmi/id/product_sku').read().strip()
+        if model == 'none':
+            raise Exception('No SKU')
+    except Exception:
+        model = open('/sys/devices/virtual/dmi/id/product_name').read()
+    if vendor in ('Lenovo', 'IBM'):
+        if '[' in model and ']' in model:
+            model = model.split('[')[1].split(']')[0]
+        model = model[:4].lower()
+    s = Session('/dev/ipmi0')
+    if not bmccfg:
+        print("No BMC configuration specified, exiting.")
+        return
+    if bmccfg.get('bmcport', None):
+        channel = set_port(s, bmccfg['bmcport'], vendor, model)
+    else:
+        channel = get_lan_channel(s)
+    awaitvlan = False
+    awaitip = False
+    awaitprefix = False
+    awaitgw = False
+    if bmccfg.get('bmcvlan', None):
+        awaitvlan = set_vlan(s, bmccfg['bmcvlan'], channel)
+    if bmccfg.get('bmcipv4', None):
+        awaitip = set_ipv4(s, bmccfg['bmcipv4'], channel)
+    if bmccfg.get('prefixv4', None):
+        awaitprefix = set_subnet(s, bmccfg['prefixv4'], channel)
+    if bmccfg.get('bmcgw', None):
+        awaitgw = set_gateway(s, bmccfg['bmcgw'], channel)
+    sys.stdout.write('Waiting for changes to take effect...')
+    sys.stdout.flush()
+    while awaitvlan and not check_vlan(s, bmccfg['bmcvlan'], channel):
+        dotwait()
+    while awaitip and not check_ipv4(s, bmccfg['bmcipv4'], channel):
+        dotwait()
+    while awaitprefix and not check_subnet(s, bmccfg['prefixv4'], channel):
+        dotwait()
+    while awaitprefix and not check_gateway(s, bmccfg['bmcgw'], channel):
+        dotwait()
+    sys.stdout.write('done\n')
+    sys.stdout.flush()
+    #await_config(s, bmccfg, channel)
+
+
+if __name__ == '__main__':
+    main()

confluent_osdeploy/el7/profiles/default/scripts/firstboot.service

@@ -4,7 +4,7 @@ Requires=network-online.target
 After=network-online.target
 
 [Service]
-ExecStart=/etc/confluent/firstboot.sh
+ExecStart=/opt/confluent/bin/firstboot.sh
 
 [Install]
 WantedBy=multi-user.target

confluent_osdeploy/el7/profiles/default/scripts/firstboot.sh

@@ -6,17 +6,35 @@
 # the script notifies confluent that install is fully complete.
 
 nodename=$(grep ^NODENAME /etc/confluent/confluent.info|awk '{print $2}')
-apikey=$(cat /etc/confluent/confluent.apikey)
-mgr=$(grep deploy_server /etc/confluent/confluent.deploycfg|awk '{print $2}')
-profile=$(grep ^profile: /etc/confluent/confluent.deploycfg|awk '{print $2}')
-cat /etc/confluent/tls/*.pem >> /etc/pki/tls/certs/ca-bundle.crt
-export nodename mgr profile
+confluent_apikey=$(cat /etc/confluent/confluent.apikey)
+confluent_mgr=$(grep ^deploy_server: /etc/confluent/confluent.deploycfg|awk '{print $2}')
+confluent_profile=$(grep ^profile: /etc/confluent/confluent.deploycfg|awk '{print $2}')
+export nodename confluent_mgr confluent_profile
 . /etc/confluent/functions
+while ! ping -c 1 $confluent_mgr >& /dev/null; do
+	sleep 1
+done
+exec >> /var/log/confluent/confluent-firstboot.log
+exec 2>> /var/log/confluent/confluent-firstboot.log
+chmod 600 /var/log/confluent/confluent-firstboot.log
+tail -f /var/log/confluent/confluent-firstboot.log > /dev/console &
+logshowpid=$!
 
+if [ ! -f /etc/confluent/firstboot.ran ]; then
+    touch /etc/confluent/firstboot.ran
 
-run_remote firstboot.custom
+    cat /etc/confluent/tls/*.pem >> /etc/pki/tls/certs/ca-bundle.crt
 
+    run_remote firstboot.custom
+    # Firstboot scripts may be placed into firstboot.d, e.g. firstboot.d/01-firstaction.sh, firstboot.d/02-secondaction.sh
+    run_remote_parts firstboot.d
 
-curl -X POST -d 'status: complete' -H "CONFLUENT_NODENAME: $nodename" -H "CONFLUENT_APIKEY: $apikey" https://$mgr/confluent-api/self/updatestatus
+    # Induce execution of remote configuration, e.g. ansible plays in ansible/firstboot.d/
+    run_remote_config firstboot.d
+fi
+
+curl -X POST -d 'status: complete' -H "CONFLUENT_NODENAME: $nodename" -H "CONFLUENT_APIKEY: $confluent_apikey" https://$confluent_mgr/confluent-api/self/updatestatus
 systemctl disable firstboot
 rm /etc/systemd/system/firstboot.service
+rm /etc/confluent/firstboot.ran
+kill $logshowpid

confluent_osdeploy/el7/profiles/default/scripts/functions

@@ -1,12 +1,137 @@
-run_remote() {
-    requestedcmd="'$*'"
+#!/bin/bash
+function test_mgr() {
+    if curl -s https://${1}/confluent-api/ > /dev/null; then
+        return 0
+    fi
+    return 1
+}
+
+function confluentpython() {
+    if [ -x /usr/libexec/platform-python ]; then
+        /usr/libexec/platform-python $*
+    elif [ -x /usr/bin/python3 ]; then
+        /usr/bin/python3 $*
+    elif [ -x /usr/bin/python ]; then
+        /usr/bin/python $*
+    elif [ -x /usr/bin/python2 ]; then
+        /usr/bin/python2 $*
+    fi
+}
+
+function set_confluent_vars() {
+    if [ -z "$nodename" ]; then
+        nodename=$(grep ^NODENAME: /etc/confluent/confluent.info | awk '{print $2}')
+    fi
+    if [[ "$confluent_mgr" == *"%"* ]]; then
+        confluent_mgr=""
+    fi
+    if [ -z "$confluent_mgr" ]; then
+        confluent_mgr=$(grep ^deploy_server: /etc/confluent/confluent.deploycfg | sed -e 's/[^ ]*: //')
+        if ! test_mgr $confluent_mgr; then
+            confluent_mgr=$(grep ^deploy_server_v6: /etc/confluent/confluent.deploycfg | sed -e 's/[^ ]*: //')
+            if [[ "$confluent_mgr" = *":"* ]]; then
+                confluent_mgr="[$confluent_mgr]"
+            fi
+        fi
+        if ! test_mgr $confluent_mgr; then
+            BESTMGRS=$(grep ^EXTMGRINFO: /etc/confluent/confluent.info | grep '|1$' | sed -e 's/EXTMGRINFO: //' -e 's/|.*//')
+            OKMGRS=$(grep ^EXTMGRINFO: /etc/confluent/confluent.info | grep '|0$' | sed -e 's/EXTMGRINFO: //' -e 's/|.*//')
+            for confluent_mgr in $BESTMGRS $OKMGRS; do
+                if [[ $confluent_mgr == *":"* ]]; then
+                    confluent_mgr="[$confluent_mgr]"
+                fi
+                if test_mgr $confluent_mgr; then
+                    break
+                fi
+            done
+        fi
+    fi
+    if [ -z "$confluent_profile" ]; then
+        confluent_profile=$(grep ^profile: /etc/confluent/confluent.deploycfg | sed -e 's/[^ ]*: //')
+    fi
+}
+
+fetch_remote() {
+    curlargs=""
+    if [ -f /etc/confluent/ca.pem ]; then
+        curlargs=" --cacert /etc/confluent/ca.pem"
+    fi
+    set_confluent_vars
+    mkdir -p $(dirname $1)
+    curl -f -sS $curlargs https://$confluent_mgr/confluent-public/os/$confluent_profile/scripts/$1 > $1
+    if [ $? != 0 ]; then echo $1 failed to download; return 1; fi
+}
+
+source_remote_parts() {
+    confluentscripttmpdir=$(mktemp -d /tmp/confluentscripts.XXXXXXXXX)
+    apiclient=/opt/confluent/bin/apiclient
+    if [ -f /etc/confluent/apiclient ]; then
+        apiclient=/etc/confluent/apiclient
+    fi
+    scriptlist=$(confluentpython $apiclient /confluent-api/self/scriptlist/$1|sed -e 's/^- //')
+    for script in $scriptlist; do
+        source_remote $1/$script
+    done
+    rm -rf $confluentscripttmpdir
+    unset confluentscripttmpdir
+}
+
+run_remote_parts() {
+    confluentscripttmpdir=$(mktemp -d /tmp/confluentscripts.XXXXXXXXX)
+    apiclient=/opt/confluent/bin/apiclient
+    if [ -f /etc/confluent/apiclient ]; then
+        apiclient=/etc/confluent/apiclient
+    fi
+    scriptlist=$(confluentpython $apiclient /confluent-api/self/scriptlist/$1|sed -e 's/^- //')
+    for script in $scriptlist; do
+        run_remote $1/$script
+    done
+    rm -rf $confluentscripttmpdir
+    unset confluentscripttmpdir
+}
+
+source_remote() {
+    set_confluent_vars
+    unsettmpdir=0
     echo
     echo '---------------------------------------------------------------------------'
-    echo Running $requestedcmd from https://$mgr/confluent-public/os/$profile/scripts/
-    tmpdir=$(mktemp -d)
-    echo Executing in $tmpdir
-    cd $tmpdir
-    curl -f -sS https://$mgr/confluent-public/os/$profile/scripts/$1 > $1
+    echo Sourcing $1 from https://$confluent_mgr/confluent-public/os/$confluent_profile/scripts/
+    if [ -z "$confluentscripttmpdir" ]; then
+        confluentscripttmpdir=$(mktemp -d /tmp/confluentscripts.XXXXXXXXX)
+        unsettmpdir=1
+    fi
+    echo Sourcing from $confluentscripttmpdir
+    cd $confluentscripttmpdir
+    fetch_remote $1
+    if [ $? != 0 ]; then echo $1 failed to download; return 1; fi
+    chmod +x $1
+    cmd=$1
+    shift
+    source ./$cmd
+    cd - > /dev/null
+    if [ "$unsettmpdir" = 1 ]; then
+        rm -rf $confluentscripttmpdir
+        unset confluentscripttmpdir
+        unsettmpdir=0
+    fi
+    rm -rf $confluentscripttmpdir
+    return $retcode
+}
+
+run_remote() {
+    requestedcmd="'$*'"
+    unsettmpdir=0
+    set_confluent_vars
+    echo
+    echo '---------------------------------------------------------------------------'
+    echo Running $requestedcmd from https://$confluent_mgr/confluent-public/os/$confluent_profile/scripts/
+    if [ -z "$confluentscripttmpdir" ]; then
+        confluentscripttmpdir=$(mktemp -d /tmp/confluentscripts.XXXXXXXXX)
+        unsettmpdir=1
+    fi
+    echo Executing in $confluentscripttmpdir
+    cd $confluentscripttmpdir
+    fetch_remote $1
     if [ $? != 0 ]; then echo $requestedcmd failed to download; return 1; fi
     chmod +x $1
     cmd=$1
@@ -16,23 +141,56 @@ run_remote() {
     shift
     ./$cmd $*
     retcode=$?
-    echo "$requestedcmd exited with code $retcode"
+    if [ $retcode -ne 0 ]; then
+        echo "$requestedcmd exited with code $retcode"
+    fi
     cd - > /dev/null
+    if [ "$unsettmpdir" = 1 ]; then
+        rm -rf $confluentscripttmpdir
+        unset confluentscripttmpdir
+        unsettmpdir=0
+    fi
     return $retcode
 }
 
 run_remote_python() {
     echo
+    set_confluent_vars
+    if [ -f /etc/confluent/ca.pem ]; then
+        curlargs=" --cacert /etc/confluent/ca.pem"
+    fi
     echo '---------------------------------------------------------------------------'
-    echo Running python script "'$*'" from https://$mgr/confluent-public/os/$profile/scripts/
-    tmpdir=$(mktemp -d)
-    echo Executing in $tmpdir
-    cd $tmpdir
-    curl -f -sS https://$mgr/confluent-public/os/$profile/scripts/$1 > $1
+    echo Running python script "'$*'" from https://$confluent_mgr/confluent-public/os/$confluent_profile/scripts/
+    confluentscripttmpdir=$(mktemp -d /tmp/confluentscripts.XXXXXXXXX)
+    echo Executing in $confluentscripttmpdir
+    cd $confluentscripttmpdir
+    mkdir -p $(dirname $1)
+    curl -f -sS $curlargs https://$confluent_mgr/confluent-public/os/$confluent_profile/scripts/$1 > $1
     if [ $? != 0 ]; then echo "'$*'" failed to download; return 1; fi
-    /usr/libexec/platform-python $*
+    confluentpython $*
     retcode=$?
     echo "'$*' exited with code $retcode"
     cd - > /dev/null
+    rm -rf $confluentscripttmpdir
+    unset confluentscripttmpdir
     return $retcode
 }
+
+run_remote_config() {
+    echo
+    set_confluent_vars
+    apiclient=/opt/confluent/bin/apiclient
+    if [ -f /etc/confluent/apiclient ]; then
+        apiclient=/etc/confluent/apiclient
+    fi
+    echo '---------------------------------------------------------------------------'
+    echo Requesting to run remote configuration for "'$*'" from $confluent_mgr under profile $confluent_profile
+    confluentpython $apiclient /confluent-api/self/remoteconfig/"$*" -d {}
+    confluentpython $apiclient /confluent-api/self/remoteconfig/status -w 204
+    echo
+    echo 'Completed remote configuration'
+    echo '---------------------------------------------------------------------------'
+    return
+}
+#If invoked as a command, use the arguments to actually run a function
+(return 0 2>/dev/null) || $1 "${@:2}"

confluent_osdeploy/el7/profiles/default/scripts/getinstalldisk

@@ -49,7 +49,7 @@ class DiskInfo(object):
 
     @property
     def priority(self):
-        if self.model.lower() in ('thinksystem_m.2_vd', 'thinksystem m.2'):
+        if self.model.lower() in ('thinksystem_m.2_vd', 'thinksystem m.2', 'thinksystem_m.2'):
             return 0
         if 'imsm' in self.mdcontainer:
             return 1

confluent_osdeploy/el7/profiles/default/scripts/infiniband/mofed.post

@@ -0,0 +1,19 @@
+# To use this script, rename or copy the mofed image to either ofed.tgz or ofed.iso
+# and modify the script below if wanting to use the iso instead of tgz
+
+# It checks for mellanox devices and opts not to install, so this script could be added
+# to a general profile without causing mofed to install on non-mellanox systems
+. /etc/confluent/functions
+if lspci -d 15b3:: -n |grep 15b3 > /dev/null; then
+    # Uncomment the following three lines and comment out the next
+    # two lines to use the .iso instead of the tgz packaging
+    #fetch_remote infiniband/mofed.iso
+    #mkdir MLNX_OFED
+    #mount -o loop infiniband/mofed.iso MLNX_OFED
+    fetch_remote infiniband/mofed.tgz
+    tar xf infiniband/mofed.tgz
+    # The rest is common between tar and iso
+    cd MLNX_OFED*
+    ./mlnxofedinstall --force
+fi
+