cb2133e871
Change strategy for pam.d entry
...
The symbolic link did not stay a symbolic link.
Use %post in rpm instead.
2018-11-14 15:11:05 -05:00
c56c1948a9
Add confluent pam to packaging
...
This enables PAM passwords to work by default,
rather than requiring user to perform more
configuration.
2018-11-14 14:55:26 -05:00
34b30a1bd8
Rework password authentication
...
Have the cache operate against the sha256 of the passphrase rather
than the passhprase directly (mitigate presence of password in memory).
Pull PAM into the cache behavior to accelerate PAM based usage.
Rearrange things so that both built in confluent and PAM passwords
can be used.
2018-11-14 14:52:03 -05:00
0e7bfe4f40
Use scanning status to control rescan behaviors
...
This causes the manual assignment to sleep less and for the rescan
command to meaningfully slow down shell requests to provide better sense
of when scan completes.
2018-11-14 14:17:12 -05:00
a93a759b72
Make /networking/macs data available through nodediscover
...
This will help combine the data together more easily.
2018-11-14 14:11:03 -05:00
cba514692c
Bring the XCC check fix to IMM
...
The same check that works for XCC should be applied to IMM
2018-11-13 16:17:39 -05:00
2bb0a70a24
Provide an xid if one is not preserved
...
The SLP xid may be gone in a recheck, default to 42 in such a case.
2018-11-13 16:09:37 -05:00
1b84cd43fe
Fix the auto-healing support
...
There was a mismatch between the handlers signature and expectation by
the discovery core.
2018-11-13 15:55:24 -05:00
39839a9f2a
Add auto-healing of incomplete SLP data
...
If a device handler indicates an SLP data as incomplete, schedule a
attempt to fixup that specific one.
2018-11-13 15:37:41 -05:00
8473cb1cf8
Survive SLP values with =
...
If the slp parsing produces = in the value, ignore it and do best
effort to get the viable data out.
2018-11-09 15:38:40 -05:00
1a10b5d747
Have confluent2lxca use current config for address
...
In a confluent2lxca scenario, it is highly probably that confluent's
attribute is not viable for LXCA usage (link local address).
Give the current configuration the opportunity to replace the
confluent reference with the current IPv4 of the host.
2018-11-09 08:53:10 -05:00
82a7012527
Add a command to generate xClarity Administrator import
...
This will generate a bulk import file for use with the xClarity
Administrator appliance.
2018-11-09 08:33:04 -05:00
199a948b33
Fix ordering without custom field list
...
The order argument only had any meaning when used in custom fields.
Add a loop in the custom field agnostic section of the code to correct
the behavior.
2018-11-09 08:32:28 -05:00
6fc305d6a0
Add ordering by field to nodediscover list
...
This provides single column sort for more managable listing of
nodediscover items.
2018-11-06 16:34:22 -05:00
75b6221dcf
Allow requesting custom columns
...
This allows for more data to be presented and some useless data
to be pruned.
2018-11-06 15:52:20 -05:00
bd5032268e
Fix csv output mode of nodediscover list
...
The changes made for tabulator broke csv output, fix that back.
2018-11-06 15:33:04 -05:00
0aa0289b06
Clean out dead code
...
There is some dead and commented code to be cleaned out.
2018-11-06 15:30:18 -05:00
96df7871cb
Convert nodediscover to use Tabulator
...
This opens the path to more customized output and have the appropriate
formatting. Also revise the Tabulator code to more closely match
the original nodediscover list output.
2018-11-06 15:28:27 -05:00
82ee69b56c
Age out macmap on node database changes
...
This mitigates problems where automation fails to quickly
react to changes/fixes in the net attributes.
2018-11-06 08:18:37 -05:00
37899ad39e
Do not inject 'None' into builddesc
...
If such data came from remote system, do not cause a stack trace.
2018-11-05 10:43:36 -05:00
43fb4467b7
Add error if chain goes off into non-existent nodes
...
Various behaviors break if the administrator declares a chain goes
to nowhere, throw up an error and hopefully see it caught to detect
this misconfiguration.
2018-11-02 15:56:34 -04:00
f5f9403eff
Fix incorrect variable name in nodediscover
...
The field name was incorrectly referencing the last field
rather than the current.
2018-11-02 15:50:02 -04:00
78e7381442
Add implicit rescan on unmatched csv data
...
If the csv file contains criteria we can't match, implicitly
try a rescan automatically to try to catch it.
2018-11-02 15:18:55 -04:00
005cefc914
Add volume creation and deletion to nodestorage
2018-11-01 16:59:42 -04:00
5f38cce51e
Finish nodestorage show
...
It now shows the pertinent details of storage on a node.
2018-11-01 10:43:28 -04:00
5d358eaeb0
Switch to output format more like nodeinventory
...
Other confluent commands (apart from nodediscovery) set a particular
convention. Go by that convention (at least by default)
2018-10-30 16:28:59 -04:00
115a6e9dd1
Add helper for tabular output
...
Provide a quick class for auto-sizing tabular output.
2018-10-30 16:23:34 -04:00
a034d05cc8
Draft tabular output of disk information
...
Print out roughly the data that will be desired in the storage show.
2018-10-30 16:10:37 -04:00
6378f823f3
Add resource name to the storage messages
...
The storage messages need to have the references preserved
for CLI consumption.
2018-10-30 15:46:54 -04:00
079dfed11e
Add type to storage messages
...
Storage messages are likely to be grouped together and need
more to disambiguate them.
2018-10-30 15:28:03 -04:00
d836bf7298
Map health to nagios compatible codes
...
nodehealth adds granularity and health to the return code.
Rather than only reflecting failure running command, also
have nodehealth assign exit code according to the expectations
of nagios.
2018-10-30 13:56:09 -04:00
25b969a4db
Add 'all' element to configuration/storage
...
Provide a way to provide all the data about storage configuration
in a single call.
2018-10-30 10:25:41 -04:00
950abde20e
Remove 'all' from storage subelements
...
This concept is potentially problematic, as a volume named 'all' is
valid. Additionally, if really wanting all, the caller probably wants
the full storage configuration, better provide that up a level to
avoid requiring many calls to do that.
2018-10-30 10:05:48 -04:00
37be696f23
Merge branch 'master' of github.com:jjohnson42/confluent
2018-10-29 14:56:37 -04:00
73cab3774d
Add support for volume creation
2018-10-26 14:31:28 -04:00
c2d52d4f83
Add functionality to delete volumes
...
Further enriching the storage api by adding the ability to delete
a volume.
2018-10-25 16:31:32 -04:00
fd17559a73
Show result of changing disk state.
...
When changing disk state, let the caller know the result explicitly.
2018-10-25 16:11:54 -04:00
3945ccd5c3
Advance storage configuration API
...
Enumerate disks in an array in disks list.
Add array associated with disk to disk data.
Show detailed data on arrays and volumes.
2018-10-25 16:07:07 -04:00
7c006b33bc
Implement functionality to configure disks
...
Disks may now have their state changed between hotspare, unconfigured,
and jbod.
2018-10-25 14:48:58 -04:00
c96b5f0270
Fix spurious trace on immediate exit confetty
...
When confetty exits without doing anything, it causes
sockapi to reference an empty request. Check for that before
checking if it is a collective request.
2018-10-25 14:12:15 -04:00
7e72240d98
Add protection against duplicate import data
...
nodediscover assign from csv will now guard against human error
in putting the same data in multiple times.
2018-10-25 11:07:56 -04:00
c150a848fd
Normalize drive state
...
Since drive state is a key api feature, make sure it is normalized
to a set vocabulary.
2018-10-24 16:36:38 -04:00
bc7a197a8c
Merge branch '18csi'
2018-10-23 09:16:32 -04:00
6973736c6a
Set password before setting username
...
The BMC is at much higher risk for rejecting the password
(e.g. the password does not pass complexity requirements). If the
username changes, but the password is still default, it is very
confusing. Give the password change the chance to break the
configuration process first.
2018-10-23 09:16:15 -04:00
d70c3dcad7
Merge branch '18csi'
2018-10-23 09:10:01 -04:00
f9055a258e
Provide specific completion behavior for noderun/nodeshell
2018-10-23 09:09:03 -04:00
76a96fa054
Merge branch '18csi'
2018-10-18 15:44:13 -04:00
c784a4ec9b
Fix noderun output of continuing commands
...
noderun always only output at the end, fix the
mistake in the select statement.
2018-10-18 15:43:57 -04:00
2ff47b886d
Fix noderun output of continuing commands
...
noderun always only output at the end, fix the
mistake in the select statement.
2018-10-18 15:43:36 -04:00
51037e2487
Change 'status' to 'state'
...
This is more consistent with several other confluent messages.
2018-10-17 09:37:31 -04:00
Jarrod Johnson