mirror of
https://github.com/xcat2/xcat-dep.git
synced 2026-10-20 06:35:32 +00:00
Daniel Hilst
7b450d7c08
t/aarch64_target.t was added with the aarch64 build target and no workflow step ran it. Adding the step alone is not enough: the four checks that run the spec's own grub2-mkimage command skip unless the arm64-efi grub modules are installed and the tool is on PATH, and both were missing on the runner. Debian and Ubuntu name the tool grub-mkimage, so looking only for the EL name skips exactly where the suite runs. The test now resolves either name and substitutes it into the spec's command. grub-efi-arm64-bin is Architecture: arm64 and cannot be installed on the amd64 runner, but the modules in it are target code, so the workflow extracts the deb from ports.ubuntu.com instead of enabling a foreign architecture, and fails when the extraction yields no modules. Measured in an ubuntu:24.04 container with the workflow's own steps: the upstream test reports 4 skips, `# skip grub2-mkimage or the arm64-efi grub modules are not installed`, and this one reports 0 with all four image checks passing. The workflow also runs t/aarch64_cross_build.t. Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
121 lines
4.9 KiB
YAML
121 lines
4.9 KiB
YAML
name: Genesis OpenEmbedded packages
|
|
|
|
on:
|
|
pull_request:
|
|
push:
|
|
branches:
|
|
- master
|
|
|
|
permissions:
|
|
contents: read
|
|
|
|
jobs:
|
|
package-tests:
|
|
runs-on: ubuntu-24.04
|
|
env:
|
|
XCAT_GENESIS_CI: 1
|
|
steps:
|
|
- uses: actions/checkout@v4
|
|
|
|
- name: Install build tools
|
|
run: |
|
|
sudo apt-get update
|
|
sudo apt-get install -y --no-install-recommends \
|
|
apt-utils bats createrepo-c dpkg-dev gnupg \
|
|
libfile-slurper-perl \
|
|
libparallel-forkmanager-perl libperl-critic-perl rpm rpm2cpio cpio \
|
|
grub-common curl ca-certificates
|
|
|
|
- name: Install the arm64-efi grub modules
|
|
# t/aarch64_target.t runs the spec's own grub2-mkimage command, and it skips when the
|
|
# arm64-efi modules are absent -- which is a skip exactly where the suite runs, so it
|
|
# measures nothing. grub-efi-arm64-bin is Architecture: arm64 and cannot be installed on
|
|
# the amd64 runner, but the modules inside it are target code, not host code, so
|
|
# extracting the deb puts them in place without enabling a foreign architecture.
|
|
run: |
|
|
set -euo pipefail
|
|
base=http://ports.ubuntu.com/ubuntu-ports/pool/main/g/grub2-unsigned
|
|
deb=$(curl -sS "$base/" | grep -oE 'grub-efi-arm64-bin_[^"]*_arm64\.deb' | sort -u | tail -1)
|
|
[ -n "$deb" ] || { echo "no grub-efi-arm64-bin deb found under $base" >&2; exit 1; }
|
|
curl -sSO "$base/$deb"
|
|
sudo dpkg -x "$deb" /
|
|
# The modules are what the test needs; say so on the branch that earned it.
|
|
n=$(ls /usr/lib/grub/arm64-efi 2>/dev/null | wc -l)
|
|
[ "$n" -gt 0 ] || { echo "the deb extracted no arm64-efi modules" >&2; exit 1; }
|
|
echo "installed $n arm64-efi grub modules from $deb"
|
|
|
|
- name: Run static checks
|
|
run: |
|
|
perl -c genesis-openembedded/build
|
|
perl -c genesis-openembedded/package
|
|
perl -c genesis-openembedded/verify-release
|
|
perl -Ilib -c lib/XCAT/BuildUtils.pm
|
|
perl -Ilib -c lib/XCAT/GenesisRelease.pm
|
|
perl -c mockbuild-all.pl
|
|
perl -c BuildUtils.pm
|
|
perl -c sbuild-all.pl
|
|
perl -c ipxe-xcat/mockbuild.pl
|
|
perl -c ipxe-xcat/sbuild.pl
|
|
perl -c ipxe-xcat/verify-payload.pl
|
|
rpmspec -P ipxe-xcat/ipxe-xcat.spec >/dev/null
|
|
rpmspec -P \
|
|
-D 'genesis_arch x86_64' \
|
|
-D 'version 2.19.0' \
|
|
-D 'release snap202608210726' \
|
|
genesis-openembedded/rpm/xCAT-genesis-openembedded.spec >/dev/null
|
|
perlcritic \
|
|
genesis-openembedded/build \
|
|
genesis-openembedded/package \
|
|
genesis-openembedded/verify-release \
|
|
ipxe-xcat/mockbuild.pl \
|
|
ipxe-xcat/sbuild.pl \
|
|
ipxe-xcat/verify-payload.pl \
|
|
lib/XCAT/BuildUtils.pm \
|
|
lib/XCAT/GenesisRelease.pm \
|
|
mockbuild-all.pl \
|
|
t/build_utils.t \
|
|
t/common-repo-gate.t \
|
|
t/genesis_openembedded_release.t \
|
|
t/genesis_openembedded_consumer.t \
|
|
t/ipxe_xcat_payload.t \
|
|
t/lib/XCAT/GenesisReleaseTest.pm
|
|
|
|
- name: Run package tests
|
|
run: |
|
|
prove -v t/build_utils.t
|
|
prove -v t/build_timeout.t
|
|
prove -v t/sbuild-all.t
|
|
prove -v t/goconserver_cross_build.t
|
|
prove -v t/ipxe_xcat_payload.t
|
|
prove -v t/mockbuild-all.t
|
|
prove -v t/net_dns_rr_types.t
|
|
prove -v t/repo-lock-race.t
|
|
prove -v t/nfslock.t
|
|
prove -v -It/lib t/genesis_openembedded_release.t
|
|
sudo -E prove -v -It/lib t/genesis_openembedded_consumer.t
|
|
prove -v t/riscv64_perl_cell.t
|
|
prove -v t/aarch64_target.t
|
|
prove -v t/aarch64_cross_build.t
|
|
sudo -E prove -v -It/lib t/common-repo-gate.t
|
|
prove -v t/openeuler.t
|
|
prove -v t/openeuler_mock_template_include.t
|
|
prove -v t/openeuler_native_result_permissions.t
|
|
prove -v -Ilib t/openeuler_native_procenv_plugin.t
|
|
prove -v -Ilib t/openeuler_native_trust_dbpath.t
|
|
prove -v -Ilib t/openeuler_native_cpio_scan.t
|
|
bats t/verify-xcatsn-install.bats
|
|
|
|
# Ubuntu's AppArmor policy blocks these unprivileged test namespaces.
|
|
- name: Run native packaging tests
|
|
run: |
|
|
set -o pipefail
|
|
sudo sysctl -w kernel.apparmor_restrict_unprivileged_userns=0
|
|
prove -v native/buildinfo_provenance.t native/goconserver-openeuler.t \
|
|
native/openeuler-power-inputs.t native/openeuler-srpm.t \
|
|
native/xnba-release-suffix.t 2>&1 | tee native.tap
|
|
# prove returns success when a test file skips all its checks.
|
|
if grep -E '^1\.\.0 # SKIP|^native/[^ ]+\.t \.+ skipped' native.tap; then
|
|
echo 'a native test file was skipped' >&2
|
|
exit 1
|
|
fi
|