mirror of
https://github.com/xcat2/xcat-dep.git
synced 2026-09-09 22:46:44 +00:00
Daniel Hilst
c4c9492e57
Master gained the EL10 riscv64 forcearch target (PR #66) and the Perl Ubuntu build (PR #63). Both touch the files this branch rewrites, so the merge is resolved per file: mockbuild-all.pl, mockbuild-perl-packages.pl keep the forcearch target profile, the noarch chroot and --epel-gap from master, and this branch's manifest gate, atomic per-cell deploy and per-package chroot scrub. assert_required_deps is dropped: verify_target_repo replaced it. The post-join bootstrap scrub now reads the uniqueext and the config recorded when the chroot was made, because the wave loop of master no longer numbers packages in @packages order. packages-manifest.conf gains a [rocky-10-riscv64-xcat] section. A target with no section is fatal, so without it the riscv64 target cannot run. goconserver/mockbuild.pl builds in the mock chroot for the host arch and cross- compiles on the host for a foreign --target-arch. A forcearch chroot would run the Go toolchain under qemu. Both paths overlay the pinned go.mod/go.sum and ship server.conf as YAML. The host-install smoke stays removed (it corrupts the build host rpm database). The checks that do not install on the host are kept: the chroot install of a cross-built ipmitool-xcat and XS perl module, and the binfmt run of the cross- built goconserver binaries. goconserver/gomod/ takes the pin of master, whose `go` directive is the lower of the two, so both the EL10 chroot and the Ubuntu sbuild toolchain accept it. t/genesis_openembedded_consumer.t: the skip count of the RPM block is 64, the number of tests it runs. Both sides carried a stale number. Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
Get latest ipxe source from git.ipxe.org
----------------------------------------
Current ipxe version is 1.21.1 (released Dec 31,2020), the tar command below will generate xnba-1.21.1.tar.bz2
1. Clone ipxe from github - git clone git://git.ipxe.org/ipxe.git
2. Verify version number - git describe --tags --always --long --abbrev=1 --match "v*"
3. Rename ipxe directory to xnba-<version> - mv ipxe xnba-1.21.1
4. Tar xnba-<version> directory - tar Jcvf xnba-1.21.1.tar.bz2 --exclude-vcs xnba-1.21.1
5. Optionally, if building is needed - cd src; make
Patch ipxe source
-----------------
1. Clone xcat-dep/xnba and create a new branch: git clone git@github.com:xcat2/xcat-dep.git; cd xcat-dep; git checkout -b <new branch>
2. Checkin the generated xnba-<version>.tar.bz2 file from above into git
3. If needed, modify existing or create additional patch files and checkin into git. The patch files will automatically be applied during build step below.
The following patches currently contain modification for xCAT Network Boot Agent
ipxe-xnbaclass.patch
ipxe-machyp.patch
ipxe-dhcp.patch
ipxe-branding.patch
ipxe-verbump.patch
3.a To modify existing or create additional patch file:
i. git clone git://git.ipxe.org/ipxe.git
ii. Make changes to the files under ipxe/src directory
iii. git diff <changed file> > my.patch
iv. If creating a new patch, rename my.patch to something like ipxe-<xxx>.patch
v. If modifying existing patch, replace the contents of that .patch file with the my.patch
vi. Be carefull of spaces vs. tabs. If original source file contained tabs, the .patch file should also have tabs for the patched lines.
vii. Checkin the new or modified patch files into the same git branch.
Build xNBA rpm for xcat-dep
---------------------------
1. On x86 RHEL machine, install required package: git, xz-devel and gcc
2. Checkout the branch created above: git clone https://github.com/xcat2/xcat-dep.git; cd xcat-dep; git checkout <new branch>
3. Copy 5 patch files listed above and xnba-<version>.tar.bz2 from cloned git directory into /root/rpmbuild/SOURCES/. Create that directory if one does not already exist.
4. RPM build: cd xcat-dep/xnba; rpmbuild -ba xnba-undi.spec
5. Copy generated rpm /root/rpmbuild/RPMS/noarch/xnba-undi-<version>.noarch.rpm into /gsa/pokgsa/projects/x/xcat/build/linux/xcat-dep/
6. Create links from <os/arch> subdirs to the /root/rpmbuild/RPMS/noarch/xnba-undi-<version>.noarch.rpm
Build xNBA deb for xcat-dep
---------------------------
1. On x86 Ubuntu machine, install required packages: git, liblzma-dev, dpkg-dev, debhelper, and quilt
2. Checkout the branch created above: git clone https://github.com/xcat2/xcat-dep.git; cd xcat-dep; git checkout <new branch>
3. DEB build: the Ubuntu/Debian build is now driven by the top-level sbuild-all.pl orchestrator
(builds inside the matching <codename>-<arch>-sbuild chroot). Build this package with
./sbuild-all.pl --arch amd64 --dists noble (or ./xnba/sbuild.pl --codename noble --arch amd64
--result-dir <dir> for this package alone). The former ./make_deb.sh has been removed.
4. ./rebuild.sh : build the package from source code, this should only run on amd64/x86_64 platform, it will update the files under "binary" directory after compilation
5. Copy generated deb file xcat-dep/xnba-undi_<version>_all.deb into /gsa/pokgsa/projects/x/xcat/build/ubuntu/xcat-dep/xcat-dep/pool/main/x/xnba-undi/
and /gsa/pokgsa/projects/x/xcat/build/ubuntu/xcat-dep/debs