2
0
mirror of https://github.com/xcat2/xcat-core.git synced 2026-11-19 17:02:15 +00:00
Files
xcat-core/xCATsn/debian/control
T
Daniel Hilst 12e1deb45a fix(xcat-core): nothing installs radvd, so the IPv6 networks announce nothing
makedhcp writes /etc/radvd.conf for every IPv6 network in the networks table
and starts the service, and no package declared radvd. On a management node
that did not happen to carry it the file was written and nothing read it. A
client that follows RFC 4861 starts DHCPv6 only when an advertisement sets the
managed flag, and takes its on-link prefix and default route from the
advertisement rather than from the lease, so an IPv6-only node received one
address with a prefix length of 128 and no route to its server.

Measured on an Ubuntu management node: radvd.service answered "not-found"
while /etc/radvd.conf held the right configuration, the compute node held a
/128 DHCPv6 lease, and its installer answered "wget: can't connect to remote
host: Cannot assign requested address" when it tried to fetch its root over
HTTP. Installing radvd made the service active and makedhcp kept it that way.

xCAT and xCATsn now require it, in the rpm specs and in the Debian control
files. A service node answers DHCP for its own subnet and writes the same
file, so it needs the daemon too.

Depends rather than Recommends on Ubuntu, because the apt 3.0 solver drops a
Recommends: that is what took bind9 out of the 26.04 install and left makedns
with no named.

radvd_packaging.t reads the four manifests, which are the artifact. Removing
any one declaration fails its own check, and moving the Debian one to
Recommends fails the check that names the difference.

Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
2026-10-30 13:45:04 -03:00

17 lines
1.2 KiB
Plaintext

Source: xcatsn
Section: admin
Priority: extra
Maintainer: xCAT <xcat-user@lists.sourceforge.net>
Build-Depends: debhelper (>= 9)
Standards-Version: 3.9.4
Homepage: https://xcat.org/
Package: xcatsn
Architecture: amd64 ppc64el riscv64
Depends: ${perl:Depends}, goconserver (>=0.3.3-snap000000000000), xcat-server (>= 2.13-snap000000000000), xcat-client (>= 2.13-snap000000000000), libdbd-sqlite3-perl, libxml-parser-perl, tftpd-hpa, libnet-telnet-perl, isc-dhcp-server | kea, bind9, radvd, apache2, nfs-kernel-server, nmap, ipmitool-xcat (>= 1.8.18-4), ipxe-xcat, xcat-genesis-scripts-amd64 (>= 2.13-snap000000000000) [amd64], xcat-genesis-scripts-ppc64el (>= 2.13-snap000000000000) [ppc64el]
Recommends: net-tools, kea, tftp-hpa, syslinux[any-amd64], libsys-virt-perl, syslinux-xcat, xnba-undi, elilo-xcat, xcat-buildkit (>= 2.13-snap000000000000), xcat-probe (>= 2.13-snap000000000000), xcat-genesis-openembedded-x86-64, xcat-genesis-openembedded-ppc64le, xcat-genesis-openembedded-riscv64, xcat-genesis-openembedded-s390x
Suggests: yaboot-xcat
Description: Metapackage for a common, default xCAT service node setup
xCATsn is a service node management package intended for at-scale
management, including hardware management and software management.