mirror of
https://github.com/xcat2/xcat-core.git
synced 2026-11-20 17:32:15 +00:00
b195fea1a7
yaboot links its configuration file to one name for each address of the node in
the mac table. The name is sprintf("%02x%02x%02x%02x", split(/\./, $ip)), and an
IPv6 address has no four octets: sprintf reads the first field as a number and
fills the rest with zeroes, so 2001:db8:156::10 gives 7d1000000. A dual-stack
node got one correct link and one link to a name no firmware requests, with no
warning. getipaddr returns the IPv6 address first on such a node, so this is
reachable without an IPv6-only network.
yaboot_config_name returns a name only for an address with four octets in range,
and the loop passes over anything else. A node that produced no name at all is
reported with what to use instead, rather than reporting success.
The error for a node with no facing address and no service node interpolated
$myname, which is declared in the branch above it and not in that one. The file
has no "use strict", so the message read ": " and the name of the management node
was lost. It now determines the name where it uses it.
This commit no longer routes the facing address by family. yaboot is reachable
only at osarch=ppc64 with RHEL earlier than 7 or SLES earlier than 11.4, and the
support matrix carries no ppc64 column, so there is no supported configuration
whose yaboot node could be IPv6-only. petitboot keeps that work, because
nodediscover selects it for PowerNV and noderes.5 documents it for bare-metal
ppc64le.
yaboot_config_name.t covers the guard. Removing it fails the four name checks and
leaves the two IPv4 checks passing, which tells the defect apart from a test that
dies.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
961 lines
35 KiB
Perl
961 lines
35 KiB
Perl
# IBM(c) 2007 EPL license http://www.eclipse.org/legal/epl-v10.html
|
|
package xCAT_plugin::yaboot;
|
|
use Data::Dumper;
|
|
use Sys::Syslog;
|
|
use xCAT::Scope;
|
|
use xCAT::Utils;
|
|
use xCAT::TableUtils;
|
|
use xCAT::ServiceNodeUtils;
|
|
use xCAT::NetworkUtils;
|
|
use xCAT::MsgUtils;
|
|
use File::Path;
|
|
use Socket;
|
|
use Getopt::Long;
|
|
use xCAT::Table;
|
|
use xCAT::Usage;
|
|
|
|
my %breaknetbootnodes;
|
|
our %normalnodes;
|
|
my $dhcpconf = "/etc/dhcpd.conf";
|
|
my $globaltftpdir = xCAT::TableUtils->getTftpDir();
|
|
|
|
#my $dhcpver = 3;
|
|
|
|
my %usage = (
|
|
"nodeset" => "Usage: nodeset <noderange> [shell|boot|runcmd=bmcsetup|iscsiboot|osimage[=<imagename>]|offline]",
|
|
);
|
|
|
|
#-----------------------------------------------------------------------------
|
|
|
|
=head3 yaboot_config_name
|
|
|
|
Builds the name of the configuration file that yaboot asks for.
|
|
|
|
Arguments:
|
|
$ip - one address of the node
|
|
Returns:
|
|
the name, or undef when the address is not IPv4.
|
|
|
|
The name is the four octets of the IPv4 address in hexadecimal. An IPv6
|
|
address has no four octets, and sprintf then reads the first field as a
|
|
number and fills the rest with zeroes. The node has one name for each
|
|
address in the mac table, so a dual-stack node got a correct name and a
|
|
name that no firmware asks for.
|
|
|
|
=cut
|
|
|
|
#-----------------------------------------------------------------------------
|
|
sub yaboot_config_name {
|
|
my ($ip) = @_;
|
|
|
|
return unless defined($ip);
|
|
my @octets = split(/\./, $ip);
|
|
return unless scalar(@octets) == 4;
|
|
return unless grep({ /\A\d+\z/ && $_ <= 255 } @octets) == 4;
|
|
return sprintf("%02x%02x%02x%02x", @octets);
|
|
}
|
|
|
|
sub handled_commands {
|
|
return {
|
|
nodeset => "noderes:netboot"
|
|
}
|
|
}
|
|
|
|
sub check_dhcp {
|
|
return 1;
|
|
|
|
#TODO: omapi magic to do things right
|
|
my $node = shift;
|
|
my $dhcpfile;
|
|
open($dhcpfile, $dhcpconf);
|
|
while (<$dhcpfile>) {
|
|
if (/host $node\b/) {
|
|
close $dhcpfile;
|
|
return 1;
|
|
}
|
|
}
|
|
close $dhcpfile;
|
|
return 0;
|
|
}
|
|
|
|
sub _slow_get_tftpdir { #make up for paths where tftpdir is not passed in
|
|
my $node = shift;
|
|
my $nrtab = xCAT::Table->new('noderes', -create => 0); #in order to detect per-node tftp directories
|
|
unless ($nrtab) { return $globaltftpdir; }
|
|
my $ent = $nrtab->getNodeAttribs($node, ["tftpdir"]);
|
|
if ($ent and $ent->{tftpdir}) {
|
|
return $ent->{tftpdir};
|
|
} else {
|
|
return $globaltftpdir;
|
|
}
|
|
}
|
|
|
|
sub getstate {
|
|
my $node = shift;
|
|
my $tftpdir = shift;
|
|
unless ($tftpdir) { $tftpdir = _slow_get_tftpdir($node); }
|
|
if (check_dhcp($node)) {
|
|
if (-r $tftpdir . "/etc/" . $node) {
|
|
my $fhand;
|
|
open($fhand, $tftpdir . "/etc/" . $node);
|
|
my $headline = <$fhand>;
|
|
close $fhand;
|
|
$headline =~ s/^#//;
|
|
chomp($headline);
|
|
return $headline;
|
|
} else {
|
|
return "boot";
|
|
}
|
|
} else {
|
|
return "discover";
|
|
}
|
|
}
|
|
|
|
sub setstate {
|
|
|
|
=pod
|
|
|
|
This function will manipulate the yaboot structure to match what the noderes/chain tables indicate the node should be booting.
|
|
|
|
=cut
|
|
|
|
my $node = shift;
|
|
my %bphash = %{ shift() };
|
|
my %chainhash = %{ shift() };
|
|
my %machash = %{ shift() };
|
|
my $tftpdir = shift;
|
|
my %nrhash = %{ shift() };
|
|
my $linuximghash = shift();
|
|
my $kern = $bphash{$node}->[0];
|
|
if ($kern->{kcmdline} =~ /!myipfn!/) {
|
|
my $ipfn;
|
|
my @ipfnd = xCAT::NetworkUtils->my_ip_facing($node);
|
|
|
|
if ($ipfnd[0] == 1) {
|
|
$::YABOOT_callback->(
|
|
{
|
|
error => [ $ipfnd[1] ],
|
|
errorcode => [1]
|
|
});
|
|
return;
|
|
}
|
|
elsif ($ipfnd[0] == 2) {
|
|
my $servicenodes = $nrhash{$node}->[0];
|
|
if ($servicenodes and $servicenodes->{servicenode}) {
|
|
my @sns = split /,/, $servicenodes->{servicenode};
|
|
foreach my $sn (@sns) {
|
|
|
|
# We are in the service node pools, print error if no facing ip.
|
|
if (xCAT::InstUtils->is_me($sn)) {
|
|
my @myself = xCAT::NetworkUtils->determinehostname();
|
|
my $myname = $myself[ (scalar @myself) - 1 ];
|
|
$::YABOOT_callback->(
|
|
{
|
|
error => [
|
|
"$myname: $ipfnd[1] on service node $sn"
|
|
],
|
|
errorcode => [1]
|
|
}
|
|
);
|
|
return;
|
|
}
|
|
}
|
|
} else {
|
|
my @myself = xCAT::NetworkUtils->determinehostname();
|
|
my $myname = $myself[ (scalar @myself) - 1 ];
|
|
$::YABOOT_callback->(
|
|
{
|
|
error => [
|
|
"$myname: $ipfnd[1]"
|
|
],
|
|
errorcode => [1]
|
|
}
|
|
);
|
|
return;
|
|
}
|
|
} else {
|
|
$ipfn = $ipfnd[1];
|
|
$kern->{kcmdline} =~ s/!myipfn!/$ipfn/g;
|
|
}
|
|
}
|
|
|
|
|
|
my $addkcmdline;
|
|
if ($kern->{addkcmdline}) {
|
|
$addkcmdline .= $kern->{addkcmdline} . " ";
|
|
}
|
|
|
|
if ($linuximghash and $linuximghash->{'addkcmdline'})
|
|
{
|
|
unless ($linuximghash->{'boottarget'})
|
|
{
|
|
$addkcmdline .= $linuximghash->{'addkcmdline'} . " ";
|
|
}
|
|
}
|
|
|
|
|
|
my $cmdhashref;
|
|
if ($addkcmdline) {
|
|
$cmdhashref = xCAT::Utils->splitkcmdline($addkcmdline);
|
|
}
|
|
|
|
if ($cmdhashref and $cmdhashref->{volatile})
|
|
{
|
|
$kern->{kcmdline} .= " " . $cmdhashref->{volatile};
|
|
}
|
|
|
|
|
|
my $pcfg;
|
|
unless (-d "$tftpdir/etc") {
|
|
mkpath("$tftpdir/etc");
|
|
}
|
|
my $nodemac;
|
|
my %client_nethash = xCAT::DBobjUtils->getNetwkInfo([$node]);
|
|
if ($client_nethash{$node}{mgtifname} =~ /hf/) {
|
|
my $mactab = xCAT::Table->new('mac');
|
|
if ($mactab) {
|
|
my $ment = $machash{$node}->[0]; #$mactab->getNodeAttribs($node,['mac']);
|
|
if ($ment and $ment->{mac}) {
|
|
my @macs = split(/\|/, $ment->{mac});
|
|
my $count = 0;
|
|
foreach my $mac (@macs) {
|
|
if ($mac !~ /!(.*)/) {
|
|
my $hostname;
|
|
if ($node !~ /^(.*)-hf(.*)$/) {
|
|
$hostname = $node . "-hf" . $count;
|
|
} else {
|
|
$hostname = $1 . "-hf" . $count;
|
|
}
|
|
open($pcfg, '>', $tftpdir . "/etc/" . $hostname);
|
|
my $cref = $chainhash{$node}->[0]; #$chaintab->getNodeAttribs($node,['currstate']);
|
|
if ($cref->{currstate}) {
|
|
print $pcfg "#" . $cref->{currstate} . "\n";
|
|
}
|
|
|
|
print $pcfg "timeout=5\n";
|
|
$normalnodes{$node} = 1;
|
|
if ($cref and $cref->{currstate} eq "boot") {
|
|
$breaknetbootnodes{$node} = 1;
|
|
delete $normalnodes{$node}; #Signify to omit this from one makedhcp command
|
|
#$sub_req->({command=>['makedhcp'], #batched elsewhere, this code is stale, hopefully
|
|
# node=>[$node],
|
|
# arg=>['-s','filename = \"xcat/nonexistant_file_to_intentionally_break_netboot_for_localboot_to_work\";']},$::YABOOT_callback);
|
|
print $pcfg "bye\n";
|
|
close($pcfg);
|
|
} elsif ($kern and $kern->{kernel}) {
|
|
|
|
#It's time to set yaboot for this node to boot the kernel..
|
|
print $pcfg "image=" . $kern->{kernel} . "\n\tlabel=xcat\n";
|
|
if ($kern and $kern->{initrd}) {
|
|
print $pcfg "\tinitrd=" . $kern->{initrd} . "\n";
|
|
}
|
|
if ($kern and $kern->{kcmdline}) {
|
|
my $kcmdline = $kern->{kcmdline};
|
|
$kcmdline =~ s/(.*ifname=.*):@macs[0].*( netdev.*)/$1:$mac$2/g;
|
|
print $pcfg "\tappend=\"" . $kcmdline . "\"\n";
|
|
}
|
|
close($pcfg);
|
|
my $inetn = xCAT::NetworkUtils->getipaddr($node);
|
|
unless ($inetn) {
|
|
syslog("local1|err", "xCAT unable to resolve IP for $node in yaboot plugin");
|
|
return;
|
|
}
|
|
} else { #TODO: actually, should possibly default to xCAT image?
|
|
print $pcfg "bye\n";
|
|
close($pcfg);
|
|
}
|
|
|
|
if ($mac =~ /:/) {
|
|
$nodemac = $mac;
|
|
my $tmp = $mac;
|
|
$tmp =~ s/(..):(..):(..):(..):(..):(..)/$1-$2-$3-$4-$5-$6/g;
|
|
my $pname = "25-" . $tmp;
|
|
unlink($tftpdir . "/etc/" . $pname);
|
|
link($tftpdir . "/etc/" . $hostname, $tftpdir . "/etc/" . $pname);
|
|
}
|
|
}
|
|
$count = $count + 2;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
} else {
|
|
|
|
open($pcfg, '>', $tftpdir . "/etc/" . $node);
|
|
my $cref = $chainhash{$node}->[0]; #$chaintab->getNodeAttribs($node,['currstate']);
|
|
if ($cref->{currstate}) {
|
|
print $pcfg "#" . $cref->{currstate} . "\n";
|
|
}
|
|
print $pcfg "timeout=5\n";
|
|
$normalnodes{$node} = 1; #Assume a normal netboot (well, normal dhcp,
|
|
#which is normally with a valid 'filename' field,
|
|
#but the typical ppc case will be 'special' makedhcp
|
|
#to clear the filename field, so the logic is a little
|
|
#opposite
|
|
# $sub_req->({command=>['makedhcp'], #This is currently batched elswhere
|
|
# node=>[$node]},$::YABOOT_callback); #It hopefully will perform correctly
|
|
|
|
if ($cref and $cref->{currstate} eq "boot") {
|
|
$breaknetbootnodes{$node} = 1;
|
|
delete $normalnodes{$node}; #Signify to omit this from one makedhcp command
|
|
#$sub_req->({command=>['makedhcp'], #batched elsewhere, this code is stale, hopefully
|
|
# node=>[$node],
|
|
# arg=>['-s','filename = \"xcat/nonexistant_file_to_intentionally_break_netboot_for_localboot_to_work\";']},$::YABOOT_callback);
|
|
print $pcfg "bye\n";
|
|
close($pcfg);
|
|
} elsif ($kern and $kern->{kernel}) {
|
|
|
|
#It's time to set yaboot for this node to boot the kernel..
|
|
print $pcfg "image=" . $kern->{kernel} . "\n\tlabel=xcat\n";
|
|
if ($kern and $kern->{initrd}) {
|
|
print $pcfg "\tinitrd=" . $kern->{initrd} . "\n";
|
|
}
|
|
if ($kern and $kern->{kcmdline}) {
|
|
print $pcfg "\tappend=\"" . $kern->{kcmdline} . "\"\n";
|
|
}
|
|
close($pcfg);
|
|
my $inetn = xCAT::NetworkUtils->getipaddr($node);
|
|
unless ($inetn) {
|
|
syslog("local1|err", "xCAT unable to resolve IP for $node in yaboot plugin");
|
|
return;
|
|
}
|
|
} else { #TODO: actually, should possibly default to xCAT image?
|
|
print $pcfg "bye\n";
|
|
close($pcfg);
|
|
}
|
|
my $ip = xCAT::NetworkUtils->getipaddr($node);
|
|
unless ($ip) {
|
|
syslog("local1|err", "xCAT unable to resolve IP in yaboot plugin");
|
|
return;
|
|
}
|
|
my $mactab = xCAT::Table->new('mac');
|
|
my %ipaddrs;
|
|
my $macstring;
|
|
$ipaddrs{$ip} = 1;
|
|
if ($mactab) {
|
|
my $ment = $machash{$node}->[0]; #$mactab->getNodeAttribs($node,['mac']);
|
|
if ($ment and $ment->{mac}) {
|
|
$macstring = $ment->{mac};
|
|
my @macs = split(/\|/, $ment->{mac});
|
|
foreach (@macs) {
|
|
$nodemac = $_;
|
|
if (/!(.*)/) {
|
|
my $ipaddr = xCAT::NetworkUtils->getipaddr($1);
|
|
if ($ipaddr) {
|
|
$ipaddrs{$ipaddr} = 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
# Do not use symbolic link, p5 does not support symbolic link in /tftpboot
|
|
# my $hassymlink = eval { symlink("",""); 1 };
|
|
my $linked = 0;
|
|
foreach $ip (keys %ipaddrs) {
|
|
my $pname = yaboot_config_name($ip);
|
|
next unless defined $pname;
|
|
unlink($tftpdir . "/etc/" . $pname);
|
|
link($tftpdir . "/etc/" . $node, $tftpdir . "/etc/" . $pname);
|
|
$linked++;
|
|
}
|
|
unless ($linked) {
|
|
$::YABOOT_callback->(
|
|
{
|
|
error => ["yaboot names its configuration file after the IPv4 address of $node, so an IPv6-only node has no name to use. Give the node an IPv4 address, or use netboot=grub2."],
|
|
errorcode => [1]
|
|
});
|
|
return;
|
|
}
|
|
|
|
if ($macstring) {
|
|
$nodemac = xCAT::Utils->parseMacTabEntry($macstring, $node);
|
|
}
|
|
|
|
if ($nodemac =~ /:/) {
|
|
my $tmp = lc($nodemac);
|
|
$tmp =~ s/(..):(..):(..):(..):(..):(..)/$1-$2-$3-$4-$5-$6/g;
|
|
my $pname = "yaboot.conf-" . $tmp;
|
|
unlink($tftpdir . "/" . $pname);
|
|
link($tftpdir . "/etc/" . $node, $tftpdir . "/" . $pname);
|
|
}
|
|
|
|
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
|
|
my $errored = 0;
|
|
|
|
sub pass_along {
|
|
my $resp = shift;
|
|
|
|
# print Dumper($resp);
|
|
|
|
$::YABOOT_callback->($resp);
|
|
if ($resp and ($resp->{errorcode} and $resp->{errorcode}->[0]) or ($resp->{error} and $resp->{error}->[0])) {
|
|
$errored = 1;
|
|
}
|
|
foreach (@{ $resp->{node} }) {
|
|
if ($_->{error} or $_->{errorcode}) {
|
|
$errored = 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
sub preprocess_request {
|
|
my $req = shift;
|
|
if ($req->{_xcatpreprocessed}->[0] == 1) { return [$req]; }
|
|
|
|
my $callback1 = shift;
|
|
my $command = $req->{command}->[0];
|
|
my $sub_req = shift;
|
|
my @args = ();
|
|
if (ref($req->{arg})) {
|
|
@args = @{ $req->{arg} };
|
|
} else {
|
|
@args = ($req->{arg});
|
|
}
|
|
@ARGV = @args;
|
|
my $nodes = $req->{node};
|
|
|
|
#use Getopt::Long;
|
|
my $HELP;
|
|
my $VERSION;
|
|
my $VERBOSE;
|
|
Getopt::Long::Configure("bundling");
|
|
Getopt::Long::Configure("pass_through");
|
|
if (!GetOptions('h|?|help' => \$HELP,
|
|
'v|version' => \$VERSION,
|
|
'V' => \$VERBOSE #>>>>>>>used for trace log>>>>>>>
|
|
)) {
|
|
if ($usage{$command}) {
|
|
my %rsp;
|
|
$rsp{data}->[0] = $usage{$command};
|
|
$callback1->(\%rsp);
|
|
}
|
|
return;
|
|
}
|
|
|
|
#>>>>>>>used for trace log start>>>>>>
|
|
my $verbose_on_off = 0;
|
|
if ($VERBOSE) { $verbose_on_off = 1; }
|
|
|
|
#>>>>>>>used for trace log end>>>>>>>
|
|
|
|
if ($HELP) {
|
|
if ($usage{$command}) {
|
|
my %rsp;
|
|
$rsp{data}->[0] = $usage{$command};
|
|
$callback1->(\%rsp);
|
|
}
|
|
return;
|
|
}
|
|
|
|
if ($VERSION) {
|
|
my $ver = xCAT::Utils->Version();
|
|
my %rsp;
|
|
$rsp{data}->[0] = "$ver";
|
|
$callback1->(\%rsp);
|
|
return;
|
|
}
|
|
|
|
|
|
my $ret=xCAT::Usage->validateArgs($command,@ARGV);
|
|
if ($ret->[0]!=0) {
|
|
if ($usage{$command}) {
|
|
my %rsp;
|
|
$rsp{error}->[0] = $ret->[1];
|
|
$rsp{data}->[1] = $usage{$command};
|
|
$rsp{errorcode}->[0] = $ret->[0];
|
|
$callback1->(\%rsp);
|
|
}
|
|
return;
|
|
}
|
|
|
|
#Assume shared tftp directory for boring people, but for cool people, help sync up tftpdirectory contents when
|
|
#if they specify no sharedtftp in site table
|
|
my @entries = xCAT::TableUtils->get_site_attribute("sharedtftp");
|
|
my $t_entry = $entries[0];
|
|
|
|
xCAT::MsgUtils->trace($verbose_on_off, "d", "yaboot: sharedtftp=$t_entry");
|
|
|
|
if (defined($t_entry) and ($t_entry eq "0" or $t_entry eq "no" or $t_entry eq "NO")) {
|
|
|
|
# check for computenodes and servicenodes from the noderange, if so error out
|
|
my @SN;
|
|
my @CN;
|
|
xCAT::ServiceNodeUtils->getSNandCPnodes(\@$nodes, \@SN, \@CN);
|
|
unless (($args[0] eq 'stat') or ($args[0] eq 'enact')) {
|
|
if ((@SN > 0) && (@CN > 0)) { # there are both SN and CN
|
|
my $rsp;
|
|
$rsp->{data}->[0] =
|
|
"Nodeset was run with a noderange containing both service nodes and compute nodes. This is not valid. You must submit with either compute nodes in the noderange or service nodes. \n";
|
|
xCAT::MsgUtils->message("E", $rsp, $callback1);
|
|
return;
|
|
|
|
}
|
|
}
|
|
|
|
$req->{'_disparatetftp'} = [1];
|
|
if ($req->{inittime}->[0]) {
|
|
return [$req];
|
|
}
|
|
if (@CN > 0) { # if compute nodes broadcast to all servicenodes
|
|
return xCAT::Scope->get_broadcast_scope($req, @_);
|
|
}
|
|
}
|
|
return [$req];
|
|
}
|
|
|
|
|
|
sub process_request {
|
|
$::YABOOT_request = shift;
|
|
$::YABOOT_callback = shift;
|
|
my $sub_req = shift;
|
|
my $command = $::YABOOT_request->{command}->[0];
|
|
%breaknetbootnodes = ();
|
|
%normalnodes = ();
|
|
|
|
my @args;
|
|
|
|
#>>>>>>>used for trace log start>>>>>>>
|
|
my @args = ();
|
|
my %opt;
|
|
my $verbose_on_off = 0;
|
|
if (ref($::YABOOT_request->{arg})) {
|
|
@args = @{ $::YABOOT_request->{arg} };
|
|
} else {
|
|
@args = ($::YABOOT_request->{arg});
|
|
}
|
|
@ARGV = @args;
|
|
GetOptions('V' => \$opt{V});
|
|
if ($opt{V}) { $verbose_on_off = 1; }
|
|
|
|
#>>>>>>>used for trace log end>>>>>>>
|
|
|
|
|
|
my @nodes;
|
|
my @rnodes;
|
|
if (ref($::YABOOT_request->{node})) {
|
|
@rnodes = @{ $::YABOOT_request->{node} };
|
|
} else {
|
|
if ($::YABOOT_request->{node}) { @rnodes = ($::YABOOT_request->{node}); }
|
|
}
|
|
unless (@rnodes) {
|
|
if ($usage{ $::YABOOT_request->{command}->[0] }) {
|
|
$::YABOOT_callback->({ data => $usage{ $::YABOOT_request->{command}->[0] } });
|
|
}
|
|
return;
|
|
}
|
|
|
|
#if not shared tftpdir, then filter, otherwise, set up everything
|
|
if ($::YABOOT_request->{'_disparatetftp'}->[0]) { #reading hint from preprocess_command
|
|
@nodes = ();
|
|
foreach (@rnodes) {
|
|
if (xCAT::NetworkUtils->nodeonmynet($_)) {
|
|
push @nodes, $_;
|
|
} else {
|
|
xCAT::MsgUtils->message("S", "$_: yaboot netboot: stop configuration because of none sharedtftp and not on same network with its xcatmaster.");
|
|
}
|
|
}
|
|
} else {
|
|
@nodes = @rnodes;
|
|
}
|
|
|
|
#>>>>>>>used for trace log>>>>>>>
|
|
my $str_node = join(" ", @nodes);
|
|
xCAT::MsgUtils->trace($verbose_on_off, "d", "yaboot: nodes are $str_node");
|
|
|
|
# return directly if no nodes in the same network
|
|
unless (@nodes) {
|
|
xCAT::MsgUtils->message("S", "xCAT: yaboot netboot: no valid nodes. Stop the operation on this server.");
|
|
return;
|
|
}
|
|
|
|
if (ref($::YABOOT_request->{arg})) {
|
|
@args = @{ $::YABOOT_request->{arg} };
|
|
} else {
|
|
@args = ($::YABOOT_request->{arg});
|
|
}
|
|
|
|
#now run the begin part of the prescripts
|
|
unless ($args[0] eq 'stat') { # or $args[0] eq 'enact') {
|
|
$errored = 0;
|
|
if ($::YABOOT_request->{'_disparatetftp'}->[0]) { #the call is distrubuted to the service node already, so only need to handles my own children
|
|
xCAT::MsgUtils->trace($verbose_on_off, "d", "yaboot: the call is distrubuted to the service node already, so only need to handles my own children");
|
|
xCAT::MsgUtils->trace($verbose_on_off, "d", "yaboot: issue runbeginpre request");
|
|
$sub_req->({ command => ['runbeginpre'],
|
|
node => \@nodes,
|
|
arg => [ $args[0], '-l' ] }, \&pass_along);
|
|
} else { #nodeset did not distribute to the service node, here we need to let runednpre to distribute the nodes to their masters
|
|
xCAT::MsgUtils->trace($verbose_on_off, "d", "yaboot: nodeset did not distribute to the service node");
|
|
xCAT::MsgUtils->trace($verbose_on_off, "d", "yaboot: issue runbeginpre request");
|
|
$sub_req->({ command => ['runbeginpre'],
|
|
node => \@rnodes,
|
|
arg => [ $args[0] ] }, \&pass_along);
|
|
}
|
|
if ($errored) {
|
|
my $rsp;
|
|
$rsp->{errorcode}->[0] = 1;
|
|
$rsp->{error}->[0] = "Failed in running begin prescripts. Processing will still continue.\n";
|
|
$::YABOOT_callback->($rsp);
|
|
}
|
|
}
|
|
|
|
#back to normal business
|
|
my $inittime = 0;
|
|
if (exists($::YABOOT_request->{inittime})) { $inittime = $::YABOOT_request->{inittime}->[0]; }
|
|
if (!$inittime) { $inittime = 0; }
|
|
$errored = 0;
|
|
my %bphash;
|
|
unless ($args[0] eq 'stat') { # or $args[0] eq 'enact') {
|
|
xCAT::MsgUtils->trace($verbose_on_off, "d", "yaboot: issue setdestiny request");
|
|
$sub_req->({ command => ['setdestiny'],
|
|
node => \@nodes,
|
|
inittime => [$inittime],
|
|
arg => \@args,
|
|
bootparams => \%bphash},
|
|
\&pass_along);
|
|
}
|
|
if ($errored) { return; }
|
|
|
|
my $chaintab = xCAT::Table->new('chain', -create => 1);
|
|
my $chainhash = $chaintab->getNodesAttribs(\@nodes, ['currstate']);
|
|
my $noderestab = xCAT::Table->new('noderes', -create => 1);
|
|
my $nodereshash = $noderestab->getNodesAttribs(\@nodes, ['tftpdir']);
|
|
my $mactab = xCAT::Table->new('mac', -create => 1);
|
|
my $machash = $mactab->getNodesAttribs(\@nodes, ['mac']);
|
|
my $nrtab = xCAT::Table->new('noderes', -create => 1);
|
|
my $nrhash = $nrtab->getNodesAttribs(\@nodes, ['servicenode']);
|
|
my $typetab = xCAT::Table->new('nodetype', -create => 1);
|
|
my $typehash = $typetab->getNodesAttribs(\@nodes, [ 'os', 'provmethod', 'arch', 'profile' ]);
|
|
my $linuximgtab = xCAT::Table->new('linuximage', -create => 1);
|
|
my $osimagetab = xCAT::Table->new('osimage', -create => 1);
|
|
|
|
my $rc;
|
|
my $errstr;
|
|
|
|
my $tftpdir;
|
|
foreach (@nodes) {
|
|
my %response;
|
|
if ($nodereshash->{$_} and $nodereshash->{$_}->[0] and $nodereshash->{$_}->[0]->{tftpdir}) {
|
|
$tftpdir = $nodereshash->{$_}->[0]->{tftpdir};
|
|
} else {
|
|
$tftpdir = $globaltftpdir;
|
|
}
|
|
$response{node}->[0]->{name}->[0] = $_;
|
|
if ($args[0] eq 'stat') {
|
|
$response{node}->[0]->{data}->[0] = getstate($_, $tftpdir);
|
|
$::YABOOT_callback->(\%response);
|
|
} elsif ($args[0]) { #If anything else, send it on to the destiny plugin, then setstate
|
|
my $ent = $typehash->{$_}->[0];
|
|
my $osimgname = $ent->{'provmethod'};
|
|
my $linuximghash = undef;
|
|
unless ($osimgname =~ /^(install|netboot|statelite)$/) {
|
|
$linuximghash = $linuximgtab->getAttribs({ imagename => $osimgname }, 'boottarget', 'addkcmdline');
|
|
}
|
|
|
|
($rc, $errstr) = setstate($_, \%bphash, $chainhash, $machash, $tftpdir, $nrhash, $linuximghash);
|
|
if ($rc) {
|
|
$response{node}->[0]->{errorcode}->[0] = $rc;
|
|
$response{node}->[0]->{errorc}->[0] = $errstr;
|
|
$::YABOOT_callback->(\%response);
|
|
}
|
|
}
|
|
} # end of foreach node
|
|
|
|
my @normalnodeset = keys %normalnodes;
|
|
my @breaknetboot = keys %breaknetbootnodes;
|
|
|
|
#print "yaboot:inittime=$inittime; normalnodeset=@normalnodeset; breaknetboot=@breaknetboot\n";
|
|
my %osimagenodehash;
|
|
for my $nn (@normalnodeset) {
|
|
|
|
#record the os version for node
|
|
my $ent = $typehash->{$nn}->[0];
|
|
my $osimage = $ent->{'provmethod'};
|
|
if ($osimage =~ /^(install|netboot|statelite)$/) {
|
|
$osimage = ($ent->{'os'}) . '-' . ($ent->{'arch'}) . '-' . ($ent->{'provmethod'}) . '-' . ($ent->{'profile'});
|
|
}
|
|
push @{ $osimagenodehash{$osimage} }, $nn;
|
|
|
|
}
|
|
|
|
foreach my $osimage (keys %osimagenodehash) {
|
|
my $osimgent = $osimagetab->getAttribs({ imagename => $osimage }, 'osvers');
|
|
my $os = $osimgent->{'osvers'};
|
|
|
|
my $osv;
|
|
my $osn;
|
|
my $osm;
|
|
if ($os =~ /(\D+)(\d+)\.(\d+)/) {
|
|
$osv = $1;
|
|
$osn = $2;
|
|
$osm = $3;
|
|
|
|
} elsif ($os =~ /(\D+)(\d+)/) {
|
|
$osv = $1;
|
|
$osn = $2;
|
|
$osm = 0;
|
|
}
|
|
|
|
#Redhat recommend to use grub2 instead of yaboot for rhels7 provision
|
|
if ($osv =~ /rh/ and int($osn) == 7) {
|
|
my $rsp;
|
|
push @{ $rsp->{data} },
|
|
"stop configuration because yaboot DOES NOT work for $os provision, please change noderes.netboot=grub2 instead.\n";
|
|
xCAT::MsgUtils->message("E", $rsp, $::YABOOT_callback);
|
|
return;
|
|
}
|
|
|
|
if (($osv =~ /rh/ and int($osn) < 6) or
|
|
($osv =~ /sles/ and int($osn) < 11)) {
|
|
|
|
# check if yaboot-xcat installed
|
|
my $yf = $tftpdir . "/yaboot";
|
|
unless (-e $yf) {
|
|
my $rsp;
|
|
push @{ $rsp->{data} },
|
|
"stop configuration because yaboot-xcat need to be installed for $os.\n";
|
|
xCAT::MsgUtils->message("E", $rsp, $::YABOOT_callback);
|
|
return;
|
|
}
|
|
} elsif (($osv =~ /rh/ and int($osn) >= 6) or
|
|
($osv =~ /sles/ and int($osn) >= 11)) {
|
|
|
|
# copy yaboot from cn's repository
|
|
my $cmd = '/usr/bin/rsync';
|
|
if (!-f $cmd || !-x $cmd) {
|
|
my $rsp;
|
|
push @{ $rsp->{data} },
|
|
"stop configuration because rsync does not exist or is not executable.\n";
|
|
xCAT::MsgUtils->message("E", $rsp, $::YABOOT_callback);
|
|
return;
|
|
}
|
|
my $yabootpath = $tftpdir . "/yb/" . $os;
|
|
mkpath $yabootpath;
|
|
|
|
my $linuximgent = $linuximgtab->getAttribs({ imagename => $osimage }, 'pkgdir');
|
|
my @pkgdirlist = split /,/, $linuximgent->{'pkgdir'};
|
|
my $pkgdir = $pkgdirlist[0];
|
|
$pkgdir =~ s/\/+$//;
|
|
|
|
|
|
my $yabootfile;
|
|
if ($os =~ /sles/) {
|
|
$yabootfile = $pkgdir . "/1/suseboot/yaboot";
|
|
} elsif ($os =~ /rh/) {
|
|
$yabootfile = $pkgdir . "/ppc/chrp/yaboot";
|
|
}
|
|
unless (-e "$yabootfile") {
|
|
my $rsp;
|
|
push @{ $rsp->{data} },
|
|
"stop configuration because Unable to find the os shipped yaboot file.\n";
|
|
xCAT::MsgUtils->message("E", $rsp, $::YABOOT_callback);
|
|
return;
|
|
}
|
|
|
|
$cmd = $cmd . " " . $yabootfile . " " . $yabootpath; #???
|
|
($rc, $errstr) = xCAT::Utils->runcmd($cmd, 0);
|
|
if ($rc)
|
|
{
|
|
my $rsp;
|
|
push @{ $rsp->{data} },
|
|
"stop configuration because $synccmd failed.\n";
|
|
xCAT::MsgUtils->message("E", $rsp, $::YABOOT_callback);
|
|
return;
|
|
}
|
|
} elsif ($osv !~ /fedora/i) {
|
|
my $rsp;
|
|
push @{ $rsp->{data} },
|
|
"stop configuration because yaboot DOES NOT work for $os provision, please change noderes.netboot=grub2 instead.\n";
|
|
xCAT::MsgUtils->message("E", $rsp, $::YABOOT_callback);
|
|
return;
|
|
}
|
|
} #end of foreach osimagenodehash
|
|
|
|
#Don't bother to try dhcp binding changes if sub_req not passed, i.e. service node build time
|
|
unless (($args[0] eq 'stat') || ($inittime) || ($args[0] eq 'offline')) {
|
|
|
|
#dhcp stuff
|
|
my $do_dhcpsetup = 1;
|
|
|
|
#my $sitetab = xCAT::Table->new('site');
|
|
#if ($sitetab) {
|
|
#(my $ref) = $sitetab->getAttribs({key => 'dhcpsetup'}, 'value');
|
|
my @entries = xCAT::TableUtils->get_site_attribute("dhcpsetup");
|
|
my $t_entry = $entries[0];
|
|
if (defined($t_entry)) {
|
|
if ($t_entry =~ /0|n|N/) { $do_dhcpsetup = 0; }
|
|
}
|
|
|
|
#}
|
|
if ($do_dhcpsetup) {
|
|
if (%osimagenodehash) {
|
|
unless (-e "$tftpdir/yb/node") {
|
|
system("mkdir -p $tftpdir/yb/node");
|
|
}
|
|
chdir("$tftpdir/yb/node");
|
|
foreach my $osimage (keys %osimagenodehash) {
|
|
|
|
my $osimgent = $osimagetab->getAttribs({ imagename => $osimage }, 'osvers');
|
|
my $osentry = $osimgent->{'osvers'};
|
|
|
|
my $osv;
|
|
my $osn;
|
|
my $osm;
|
|
if ($osentry =~ /(\D+)(\d+)\.(\d+)/) {
|
|
$osv = $1;
|
|
$osn = $2;
|
|
$osm = $3;
|
|
|
|
} elsif ($osentry =~ /(\D+)(\d+)/) {
|
|
$osv = $1;
|
|
$osn = $2;
|
|
$osm = 0;
|
|
}
|
|
if (($osv =~ /rh/ and int($osn) >= 6) or
|
|
($osv =~ /sles/ and int($osn) >= 11)) {
|
|
foreach my $tmp_node (@{ $osimagenodehash{$osimage} }) {
|
|
unless (-e "yaboot-$tmp_node") {
|
|
symlink("../$osentry/yaboot", "yaboot-$tmp_node");
|
|
|
|
#symlink("/tftpboot/yb/$osentry/yaboot", "yb/node/yaboot-$tmp_node");
|
|
}
|
|
}
|
|
if ($::YABOOT_request->{'_disparatetftp'}->[0]) { #reading hint from preprocess_command
|
|
xCAT::MsgUtils->trace($verbose_on_off, "d", "yaboot: issue makedhcp request");
|
|
$sub_req->({ command => ['makedhcp'],
|
|
node => \@{ $osimagenodehash{$osimage} },
|
|
arg => ['-l'] }, $::YABOOT_callback);
|
|
} else {
|
|
xCAT::MsgUtils->trace($verbose_on_off, "d", "yaboot: issue makedhcp request");
|
|
$sub_req->({ command => ['makedhcp'],
|
|
node => \@{ $osimagenodehash{$osimage} } }, $::YABOOT_callback);
|
|
}
|
|
} else {
|
|
foreach my $tmp_node (@{ $osimagenodehash{$osimage} }) {
|
|
unless (-e "yaboot-$tmp_node") {
|
|
symlink("../../yaboot", "yb/node/yaboot-$tmp_node");
|
|
}
|
|
}
|
|
|
|
if ($::YABOOT_request->{'_disparatetftp'}->[0]) { #reading hint from preprocess_command, only change local settings if already farmed
|
|
xCAT::MsgUtils->trace($verbose_on_off, "d", "yaboot: issue makedhcp request");
|
|
$sub_req->({ command => ['makedhcp'], arg => ['-l'],
|
|
node => \@{ $osimagenodehash{$osimage} } }, $::YABOOT_callback);
|
|
} else {
|
|
xCAT::MsgUtils->trace($verbose_on_off, "d", "yaboot: issue makedhcp request");
|
|
$sub_req->({ command => ['makedhcp'],
|
|
node => \@{ $osimagenodehash{$osimage} } }, $::YABOOT_callback);
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
if ($::YABOOT_request->{'_disparatetftp'}->[0]) { #reading hint from preprocess_command, only change local settings if already farmed
|
|
xCAT::MsgUtils->trace($verbose_on_off, "d", "yaboot: issue makedhcp request");
|
|
$sub_req->({ command => ['makedhcp'], arg => ['-l'],
|
|
node => \@normalnodeset }, $::YABOOT_callback);
|
|
} else {
|
|
xCAT::MsgUtils->trace($verbose_on_off, "d", "yaboot: issue makedhcp request");
|
|
$sub_req->({ command => ['makedhcp'],
|
|
node => \@normalnodeset }, $::YABOOT_callback);
|
|
}
|
|
}
|
|
foreach my $tmp_node (@breaknetboot) {
|
|
if (-e "$tftpdir/yb/node/yaboot-$tmp_node") {
|
|
unlink("$tftpdir/yb/node/yaboot-$tmp_node");
|
|
}
|
|
}
|
|
if ($::YABOOT_request->{'_disparatetftp'}->[0]) { #reading hint from preprocess_command
|
|
xCAT::MsgUtils->trace($verbose_on_off, "d", "yaboot: issue makedhcp request");
|
|
$sub_req->({ command => ['makedhcp'],
|
|
node => \@breaknetboot,
|
|
arg => ['-l'] }, $::YABOOT_callback);
|
|
} else {
|
|
xCAT::MsgUtils->trace($verbose_on_off, "d", "yaboot: issue makedhcp request");
|
|
$sub_req->({ command => ['makedhcp'],
|
|
node => \@breaknetboot }, $::YABOOT_callback);
|
|
}
|
|
}
|
|
}
|
|
|
|
#now run the end part of the prescripts
|
|
unless ($args[0] eq 'stat') { # or $args[0] eq 'enact')
|
|
$errored = 0;
|
|
if ($::YABOOT_request->{'_disparatetftp'}->[0]) { #the call is distrubuted to the service node already, so only need to handles my own children
|
|
xCAT::MsgUtils->trace($verbose_on_off, "d", "yaboot: issue runendpre request");
|
|
$sub_req->({ command => ['runendpre'],
|
|
node => \@nodes,
|
|
arg => [ $args[0], '-l' ] }, \&pass_along);
|
|
} else { #nodeset did not distribute to the service node, here we need to let runednpre to distribute the nodes to their masters
|
|
xCAT::MsgUtils->trace($verbose_on_off, "d", "yaboot: issue runendpre request");
|
|
$sub_req->({ command => ['runendpre'],
|
|
node => \@rnodes,
|
|
arg => [ $args[0] ] }, \&pass_along);
|
|
}
|
|
if ($errored) {
|
|
my $rsp;
|
|
$rsp->{errorcode}->[0] = 1;
|
|
$rsp->{error}->[0] = "Failed in running end prescripts. Processing will still continue.\n";
|
|
$::YABOOT_callback->($rsp);
|
|
}
|
|
}
|
|
}
|
|
|
|
#----------------------------------------------------------------------------
|
|
|
|
=head3 getNodesetStates
|
|
returns the nodeset state for the given nodes. The possible nodeset
|
|
states are: netboot, install, boot and discover.
|
|
Arguments:
|
|
nodes --- a pointer to an array of nodes
|
|
states -- a pointer to a hash table. This hash will be filled by this
|
|
function.The key is the nodeset status and the value is a pointer
|
|
to an array of nodes.
|
|
Returns:
|
|
(return code, error message)
|
|
=cut
|
|
|
|
#-----------------------------------------------------------------------------
|
|
sub getNodesetStates {
|
|
my $noderef = shift;
|
|
if ($noderef =~ /xCAT_plugin::yaboot/) {
|
|
$noderef = shift;
|
|
}
|
|
my @nodes = @$noderef;
|
|
my $hashref = shift;
|
|
my $noderestab = xCAT::Table->new('noderes'); #in order to detect per-node tftp directories
|
|
my %nrhash = %{ $noderestab->getNodesAttribs(\@nodes, [qw(tftpdir)]) };
|
|
|
|
if (@nodes > 0) {
|
|
foreach my $node (@nodes) {
|
|
my $tftpdir;
|
|
if ($nrhash{$node}->[0] and $nrhash{$node}->[0]->{tftpdir}) {
|
|
$tftpdir = $nrhash{$node}->[0]->{tftpdir};
|
|
} else {
|
|
$tftpdir = $globaltftpdir;
|
|
}
|
|
my $tmp = getstate($node, $tftpdir);
|
|
my @a = split(' ', $tmp);
|
|
$stat = $a[0];
|
|
if (exists($hashref->{$stat})) {
|
|
my $pa = $hashref->{$stat};
|
|
push(@$pa, $node);
|
|
}
|
|
else {
|
|
$hashref->{$stat} = [$node];
|
|
}
|
|
}
|
|
}
|
|
return (0, "");
|
|
}
|
|
|
|
1;
|