Bin Xu cb25622331 It is for provision log enhancement and partial address #4582 (#4648) ...

- clear logs in the key components during provisioning (not only debug mode, but debug mode will have more logs)
 - now only cover rhel7 stateful and stateless
 - make more syslogs into cluster.log (tag = xcat or xcat.*)
 - the changes will not impact other distro

2018-01-23 03:20:42 -06:00

..

upflag

Rework upflag.cpp to have a less Visual Studio oriented snippet for more straightforward compile.

2011-11-30 20:37:45 +00:00

addcudakey

cuda installation supporting for ubuntu14.04.2 ppc64el

2015-04-03 04:05:38 -04:00

addsiteyum

fix bug#4366 change /bin/sh to /bin/bash

2014-11-19 09:42:19 -05:00

aixlitesetup

add mntopts to litetree mount command

2012-07-16 17:07:35 +00:00

aixremoteshell

perltidy all perl files, part 2

2016-07-21 13:27:40 -04:00

aixswupdate

perltidy all perl files, part 2

2016-07-21 13:27:40 -04:00

aixvgsetup

Fix sourceforge bug #4691 Use a consistent log tag for xCAT log

2015-07-01 18:03:36 +08:00

allowcred.awk

Postscript logging - removed logging from awk scripts that broke postscript processing

2010-04-06 16:58:05 +00:00

check_mlnx_firmware

Create some sample postscripts that users can run to check

2017-10-03 12:00:54 -04:00

chef-client

fix bug#4366 change /bin/sh to /bin/bash

2014-11-19 09:42:19 -05:00

cleanup_nvm.sh

fix issue 1828: xCAT not start from hard disk after provsioned statefull node

2016-09-27 04:45:02 -04:00

confGang

Fix sourceforge bug #4691 Use a consistent log tag for xCAT log

2015-07-02 14:58:53 +08:00

config_bootnicsea

perltidy all perl files, part 2

2016-07-21 13:27:40 -04:00

config_chef_client

fix bug#4366 change /bin/sh to /bin/bash

2014-11-19 09:42:19 -05:00

config_chef_server

fix bug#4366 change /bin/sh to /bin/bash

2014-11-19 09:42:19 -05:00

config_chef_workstation

fix bug#4366 change /bin/sh to /bin/bash

2014-11-19 09:42:19 -05:00

config_cuda

use cudaruntime-8-0 as default

2016-08-15 08:50:49 -04:00

config_puppet_client

fix bug#4366 change /bin/sh to /bin/bash

2014-11-19 09:42:19 -05:00

config_puppet_server

fix bug#4366 change /bin/sh to /bin/bash

2014-11-19 09:42:19 -05:00

configbond

fix salve/slave typo

2017-02-23 13:46:44 -08:00

configefi

revert: use df instead of mount, and check for the disk that /boot is on, rather than /

2017-02-24 01:54:19 +00:00

configeth

fix confignetwork_static_installnic failure on ubuntu (#3846)

2017-09-05 17:05:04 +08:00

configeth_aix

perltidy all perl files, part 2

2016-07-21 13:27:40 -04:00

configfirewall

perltidy all perl files, part 2

2016-07-21 13:27:40 -04:00

confighfi

fixing the typo error in last commit for master

2013-12-03 00:55:56 +08:00

configib

Add support for a default MTU on a network

2016-10-01 16:01:28 -04:00

configinterface

issues for install license file on accton switches (#4460)

2017-12-07 00:53:32 -06:00

confignetwork

ignore bmc interfaces defined in the nics table (don't generate an error)

2017-12-15 10:04:02 -08:00

confignics

enhance exit code for configeth (#3451)

2017-07-14 14:24:05 +08:00

confignimsh

perltidy all perl files, part 2

2016-07-21 13:27:40 -04:00

createFS

roll back to the previous version

2012-11-23 02:53:53 +00:00

cumulusztp

Update setupntp and call it from cumulusztp

2017-10-05 11:03:30 -04:00

cvs_template.pl

perltidy all perl files

2016-07-20 11:40:27 -04:00

cvs_template.sh

Example of booted image versioning using CVS.

2008-09-10 21:44:55 +00:00

db2install

perltidy all perl files, part 2

2016-07-21 13:27:40 -04:00

disableconsistentNICrename

enhance the script to support various bootmgr

2014-11-20 01:57:27 -08:00

documulusdiscovery

refine cumulus discovery procedure to handle the different response from the MN

2017-09-11 05:26:37 -04:00

efibootmgr

use genesis kernel/initrd for sysclone.

2013-04-10 06:35:36 +00:00

enabledebug

add return value

2012-11-23 02:29:54 +00:00

enablekdump

fix issue Enable Kdump can not work on diskless image for rh7.3 snapshot1 #1805;add support for kdump on rh7.x

2016-09-12 01:32:34 -04:00

enablesnmp

Support config snmpv1/2 community string for Mellanox switches during discovery phase (#4030)

2017-09-28 22:07:55 -05:00

enablesysreq

add return value

2012-11-23 02:31:37 +00:00

getcredentials.awk

Remove the mess info '<xcatdsource>' from the content when call getcredentials.awk (#3881)

2017-09-08 14:19:34 +08:00

getmypostscript.cumulus

Ensure mypostscript has permission 700 (#3847)

2017-09-07 09:18:35 +08:00

getpostscript.awk

Remove the mess info '<xcatdsource>' from the content when call getcredentials.awk (#3881)

2017-09-08 14:19:34 +08:00

hardeths

Add netmask to configonie script for change ip

2017-09-14 16:43:31 -04:00

HPCbootstatus

support xcatmon push model for HPC software.

2010-11-24 07:04:00 +00:00

HPCbootstatus.aix

perltidy all perl files, part 2

2016-07-21 13:27:40 -04:00

HPCbootstatus.linux

add return value

2012-11-23 03:23:14 +00:00

HPCbootstatus.linuxinit

Double check with design, Add /etc/init.d/HPCbootstatus.linuxinit on Linux for diskful node reboot.

2010-12-08 03:26:14 +00:00

install_chef_client

fix bug#4366 change /bin/sh to /bin/bash

2014-11-19 09:42:19 -05:00

install_chef_server

fix bug#4366 change /bin/sh to /bin/bash

2014-11-19 09:42:19 -05:00

install_chef_workstation

fix bug#4366 change /bin/sh to /bin/bash

2014-11-19 09:42:19 -05:00

install_lsf

fix [fvt]2.12.3 install_lsf need to modify the lsb.hosts script #1910

2016-09-28 17:39:38 +08:00

install_puppet_client

fix bug#4366 change /bin/sh to /bin/bash

2014-11-19 09:42:19 -05:00

install_puppet_server

fix bug#4366 change /bin/sh to /bin/bash

2014-11-19 09:42:19 -05:00

joindomain

Fix bugs in joindomain postscript

2010-08-24 15:51:31 +00:00

killsyslog

sysclone: fix some bug in Softlayer environment

2014-06-23 05:06:20 -04:00

locktftpdir.awk

fix defect :change all logger calls to put xcat msgs into local4 - ID: 3513525

2012-05-15 08:17:57 +00:00

lsf_startup

polish lsf_startup

2016-03-28 03:10:43 -04:00

make_sn_fs

fix typo

2011-10-20 18:58:52 +00:00

makeinitrd

fix the bug when use dracut to rebuild initrd

2014-11-04 21:45:44 -05:00

mkhyperv

fix defect :change all logger calls to put xcat msgs into local4 - ID: 3513525

2012-05-15 08:05:28 +00:00

mkresolvconf

Use IP address of xcatmaster instead of hostname in resolv.conf (#4537)

2017-12-16 10:00:34 +08:00

mountinstall

remove the -vx flag

2013-11-11 14:46:37 -05:00

nicutils.sh

Support multiple bonds on bring-up

2017-12-06 12:17:27 -05:00

odbcsetup

perltidy all perl files, part 2

2016-07-21 13:27:40 -04:00

ospkgs

fixed issue #360, updatenode -P ospkgs failed to install cuda

2015-11-05 10:07:49 -05:00

otherpkgs

Support http repos for otherpkgs #4042

2017-11-13 00:47:50 -05:00

reboot

take egans email address out of the comments

2012-10-31 11:22:00 +00:00

redirectps

perltidy all perl files, part 2

2016-07-21 13:27:40 -04:00

remoteshell

disable the 'sshd enablement' for diskless and statelite (#3027)

2017-05-11 00:44:11 -05:00

replace_byid_device

fix defect 4295, sysclone can't clone a SLES11.3 golden client

2014-10-26 22:38:25 -04:00

resyslog

take egans email address out of the comments

2012-10-31 11:22:00 +00:00

routeop

fix setroute failed during updatenode (#3598)

2017-08-02 05:09:34 -05:00

runxcatpost

Turn off xcatpost at beginning rather than end (#2968)

2017-05-02 21:35:31 -05:00

serialconsole

fix defect :change all logger calls to put xcat msgs into local4 - ID: 3513525

2012-05-15 03:22:15 +00:00

servicenode

Not restart xcatd in 'servicenode' when the node is not stateless and statelite as it will fail in postscript stage. (#3872)

2017-09-07 15:52:53 +08:00

setbootfromdisk

fix bug#4366 change /bin/sh to /bin/bash

2014-11-19 09:42:19 -05:00

setbootfromnet

fix issue The line 71 of postbootscript setbootfromnet is wrong in rhels7.4GA #3562

2017-07-31 04:59:41 -04:00

setiscsiparms.awk

fix defect :change all logger calls to put xcat msgs into local4 - ID: 3513525

2012-05-15 07:14:41 +00:00

setroute

enhance setroute error check and return code. (#4217)

2017-11-07 14:29:55 +08:00

setupdockerhost

Relocate check for /sbin/brctl

2016-05-13 10:43:20 -04:00

setupesx

fix bug#4366 change /bin/sh to /bin/bash

2014-11-19 09:42:19 -05:00

setupLDAP

fix defect :change all logger calls to put xcat msgs into local4 - ID: 3513525

2012-05-15 07:02:26 +00:00

setupnfsv4replication

perltidy all perl files, part 2

2016-07-21 13:27:40 -04:00

setupntp

do not set exit_code to 1 when the clock is not synced before the timeout (#4362)

2017-11-23 03:56:01 -06:00

setuppostbootscripts

Fix sourceforge bug #4691 Use a consistent log tag for xCAT log

2015-07-01 18:03:36 +08:00

setupscratch

Fix sourceforge bug #4691 Use a consistent log tag for xCAT log

2015-07-01 18:03:36 +08:00

startsyncfiles.aix

perltidy all perl files, part 2

2016-07-21 13:27:40 -04:00

startsyncfiles.awk

Continue the fix to avoid sslv3 in xcatd. In this commit, all the calling to [openssl s_client] in xcat code which used to connect to xcatd will add arguments [-no_ssl3 -no_ssl2] to avoid the using of sslv2/3

2015-02-12 20:19:00 -05:00

sudoer

Fix sourceforge bug #4691 Use a consistent log tag for xCAT log

2015-07-01 18:03:36 +08:00

syncfiles

checking if /etc/os-release/ file is existed

2017-03-10 15:54:32 -05:00

syscloneimgupdate

fix the bug when use dracut to rebuild initrd

2014-11-05 02:22:40 -05:00

syslog

Do not comment out rsyslog /var/log/messages on MN (#4527)

2018-01-10 21:00:59 -06:00

umountpost

add return value

2012-11-25 04:34:56 +00:00

unlocktftpdir.awk

fix defect :change all logger calls to put xcat msgs into local4 - ID: 3513525

2012-05-15 07:05:12 +00:00

update_mlnx_adapter_firmware

Create some sample postscripts that users can run to check

2017-10-03 12:00:54 -04:00

update_nvme_firmware

update script update_nvme_firmware based on Victor's comments

2017-10-30 09:15:42 -04:00

updateflag.awk

Use defined variable in updateflag.awk

2017-01-06 10:00:59 +01:00

updatenetwork

get rid of needless output

2014-11-04 21:43:02 -05:00

upflagx64.exe

-Add update flag support and source for Windows deployment

2008-09-08 21:03:38 +00:00

upflagx86.exe

-Add update flag support and source for Windows deployment

2008-09-08 21:03:38 +00:00

uploadboot

-Use curl instead of normal tftp client to upload, since Fedora only has curl

2008-04-30 15:11:04 +00:00

xcataixpost

perltidy all perl files, part 2

2016-07-21 13:27:40 -04:00

xcataixscript

perltidy all perl files, part 2

2016-07-21 13:27:40 -04:00

xcatclient

Fix sourceforge bug #4691 Use a consistent log tag for xCAT log

2015-07-01 18:03:36 +08:00

xcatdsklspost

It is for provision log enhancement and partial address #4582 (#4648)

2018-01-23 03:20:42 -06:00

xcatflowrequest

defect 3819

2013-10-21 11:28:50 -04:00

xcatinstallpost

It is for provision log enhancement and partial address #4582 (#4648)

2018-01-23 03:20:42 -06:00

xcatlib.sh

It is for provision log enhancement and partial address #4582 (#4648)

2018-01-23 03:20:42 -06:00

xcatpostinit

fix issue linux orderly shutdown not noticed by xcat. #1939;replace xcatpostinit1 sysvinit service with xcatpostinit1.service systemd service unit as the hook to run PS&PBS and report status for redhat;report node status on system <reboot/shutdown> command

2016-11-07 13:54:47 +08:00

xcatpostinit1

change the shebang of xcatpostinit1 to bash, since xcatpostinit1 used some bash features, in case that sh is not linked to bash

2016-11-29 08:16:28 -05:00

xcatpostinit1.install

Add the 'postbooting' status to indicate xCAT start to handle postboot tasks (#4346) (#4369)

2018-01-19 02:39:11 -06:00

xcatpostinit1.netboot

Add the 'postbooting' status to indicate xCAT start to handle postboot tasks (#4346) (#4369)

2018-01-19 02:39:11 -06:00

xcatpostinit1.service

fix issue linux orderly shutdown not noticed by xcat. #1939;replace xcatpostinit1 sysvinit service with xcatpostinit1.service systemd service unit as the hook to run PS&PBS and report status for redhat;report node status on system <reboot/shutdown> command

2016-11-07 13:54:47 +08:00

xcatserver

Fix sourceforge bug #4691 Use a consistent log tag for xCAT log

2015-07-01 18:03:36 +08:00