xcat-core/xCATsn/xCATsn.spec

Summary: Metapackage for a common, default xCAT service node setup
Name: xCATsn
Version: %{?version:%{version}}%{!?version:%(cat Version)}
Release: %{?release:%{release}}%{!?release:%(cat Release)}
Epoch: 4
License: EPL
Group: Applications/System
Vendor: IBM Corp.
Packager: IBM Corp.
Distribution: %{?_distribution:%{_distribution}}%{!?_distribution:%{_vendor}}
Prefix: /opt/xcat
BuildRoot: /var/tmp/%{name}-%{version}-%{release}-root
#BuildArch: noarch
Source1: xcat.conf
Source2: license.tar.gz
Source3: xCATSN
Source4: etc.tar.gz
Source5: templates.tar.gz
Source6: xcat.conf.apach24
Requires: perl-DBD-SQLite
Requires: xCAT-client = 4:%{version}-%{release}
Requires: xCAT-server = 4:%{version}-%{release}
Requires: xCAT-probe  = 4:%{version}-%{release}
# RPM 4.11 does not recognize weak dependency tags.
%if 0%{?fedora} || 0%{?rhel} >= 8 || 0%{?suse_version} >= 1500
Recommends: xCAT-genesis-openembedded-x86_64
Recommends: xCAT-genesis-openembedded-ppc64le
%endif

# Match xCAT-genesis-scripts package naming by build architecture.
%ifarch i386 i586 i686 x86
Requires: xCAT-genesis-scripts-x86 = 1:%{version}-%{release}
%endif
%ifarch x86_64
Requires: xCAT-genesis-scripts-x86_64 = 1:%{version}-%{release}
%endif
%ifarch ppc ppc64 ppc64le
Requires: xCAT-genesis-scripts-ppc64 = 1:%{version}-%{release}
%endif
%ifarch aarch64
Requires: xCAT-genesis-scripts-aarch64 = 1:%{version}-%{release}
%endif

Conflicts: xCAT

%define pcm %(if [ "$pcm" = "1" ];then echo 1; else echo 0; fi)
%define notpcm %(if [ "$pcm" = "1" ];then echo 0; else echo 1; fi)

%ifos linux
# on RHEL7, need to specify it explicitly
Requires: net-tools
Requires: /usr/bin/killall
# yaboot-xcat is pulled in so any SN can manage ppc nodes
Requires: httpd nfs-utils nmap bind
# DHCP backend resolved at INSTALL time (not build time) via an RPM rich
# dependency, so a single flat xcat-core build is correct on every EL: el10+
# dropped ISC dhcp from its distro and uses Kea; el8/el9 use ISC dhcpd. SLES
# has no "system-release" provide, so the condition is false there and it
# falls to dhcp-server (/usr/sbin/dhcpd), preserving prior behavior.
# system-release is versioned per release package (el10=10.x, el9=9.x, el8=8.x).
Requires: (kea if (system-release >= 10) else /usr/sbin/dhcpd)
Requires: (kea-hooks if (system-release >= 10))
# On RHEL this pulls in openssh-server, on SLES it pulls in openssh
Requires: /usr/bin/ssh
%ifnarch s390x
Requires: /usr/sbin/in.tftpd
# Stty is only needed for rcons on ppc64 nodes, but for mixed clusters require it on both x and p
Requires: perl-IO-Stty
%endif
%endif

%ifos linux
Requires: goconserver >= 0.3.3
%endif

%ifarch i386 i586 i686 x86 x86_64
Requires: xnba-undi
Requires: syslinux-xcat
Requires: ipmitool-xcat >= 1.8.17-1
%endif
%ifos linux
%ifarch ppc ppc64 ppc64le
Requires: ipmitool-xcat >= 1.8.17-1
%endif
%endif
%ifos linux
%ifarch riscv64
Requires: ipmitool-xcat >= 1.8.17-1
%endif
%endif

%description
xCAT supports management of very large sized cluster by creating a Hierarchical
Cluster and the concept of xCAT Service Nodes. The xCAT Management Node can
delegate all management operational needs to the Service Node responsible for a
set of compute node. xCATsn package provides xCAT service node support.

%prep
%ifos linux
tar zxf %{SOURCE2}
tar zxf %{SOURCE4}
%else
cp %{SOURCE2} /opt/freeware/src/packages/BUILD
gunzip -f license.tar.gz
tar -xf license.tar
%endif

%build

%install
%ifos linux
mkdir -p $RPM_BUILD_ROOT/etc/xcat/conf.orig
mkdir -p $RPM_BUILD_ROOT/etc/xcat/rsyslog.conf
mkdir -p $RPM_BUILD_ROOT/etc/xcat/logrotate.conf
mkdir -p $RPM_BUILD_ROOT/etc/apache2/conf.d
mkdir -p $RPM_BUILD_ROOT/etc/httpd/conf.d/
mkdir -p $RPM_BUILD_ROOT/%{prefix}/share/xcat/
# cd -
# Pick the Apache generation at build time.  Selecting it in the post scriptlet
# instead rewrites a file rpm has already checksummed, defeating noreplace.
%if 0%{?fedora} || 0%{?rhel} >= 7 || 0%{?suse_version} >= 1200
cp %{SOURCE6} $RPM_BUILD_ROOT/etc/apache2/conf.d/xcat.conf
cp %{SOURCE6} $RPM_BUILD_ROOT/etc/httpd/conf.d/xcat.conf
%else
cp %{SOURCE1} $RPM_BUILD_ROOT/etc/apache2/conf.d/xcat.conf
cp %{SOURCE1} $RPM_BUILD_ROOT/etc/httpd/conf.d/xcat.conf
%endif
cp %{SOURCE3} $RPM_BUILD_ROOT/etc/xCATSN
cp %{SOURCE1} $RPM_BUILD_ROOT/etc/xcat/conf.orig/xcat.conf.apach22
cp %{SOURCE6} $RPM_BUILD_ROOT/etc/xcat/conf.orig/xcat.conf.apach24
cp -a  etc/rsyslog.d/* $RPM_BUILD_ROOT/etc/xcat/rsyslog.conf/
cp -a  etc/logrotate.d/* $RPM_BUILD_ROOT/etc/xcat/logrotate.conf/

mkdir -p $RPM_BUILD_ROOT/%{prefix}/share/doc/packages/xCAT
cp LICENSE.html $RPM_BUILD_ROOT/%{prefix}/share/doc/packages/xCAT

mkdir -p $RPM_BUILD_ROOT/%{prefix}/share/xcat/
cd $RPM_BUILD_ROOT/%{prefix}/share/xcat/
tar zxf %{SOURCE5}

%else
mkdir -p $RPM_BUILD_ROOT/etc/
mkdir -p $RPM_BUILD_ROOT/opt/xcat/
cp %{SOURCE3} $RPM_BUILD_ROOT/etc/xCATSN

mkdir -p $RPM_BUILD_ROOT/%{prefix}/share/xcat/
cd $RPM_BUILD_ROOT/%{prefix}/share/xcat/
cp %{SOURCE5} $RPM_BUILD_ROOT/%{prefix}/share/xcat
gunzip -f templates.tar.gz
tar -xf templates.tar
rm templates.tar

%endif

%ifos linux
# rpm fixes each config file's fate before %pre runs, so a migration there can
# delete an active file rpm has already decided to leave as xcat.conf.rpmnew.
# %pretrans runs before that decision.  It is Lua because a pre-transaction
# scriptlet cannot rely on any dependency being unpacked yet.
%pretrans -p <lua>
-- Older packages shipped xcat.conf as ordinary payload and then rewrote it
-- from conf.orig in %post, so rpm's recorded digest cannot tell a stock file
-- from a customised one.  Compare against the outgoing package's templates,
-- still on disk at this point, and drop only a file that still matches one.
if arg[2] and tonumber(arg[2]) == 1 then return end

local function contents(path)
    local handle = io.open(path, "rb")
    if not handle then return nil end
    local data = handle:read("*a")
    handle:close()
    return data
end

local templates = { contents("/etc/xcat/conf.orig/xcat.conf.apach24"),
                    contents("/etc/xcat/conf.orig/xcat.conf.apach22") }

for _, active in ipairs({ "/etc/httpd/conf.d/xcat.conf",
                          "/etc/apache2/conf.d/xcat.conf" }) do
    -- A symlink or any other non-regular path is treated as locally managed.
    if posix.stat(active, "type") == "regular" then
        local current = contents(active)
        for _, template in ipairs(templates) do
            if current and current == template then
                os.remove(active)
                break
            end
        end
    end
end
%endif

%pre
# only need to check on AIX
%ifnos linux
if [ -x /usr/sbin/emgr ]; then          # Check for emgr cmd
	/usr/sbin/emgr -l 2>&1 |  grep -i xCAT   # Test for any xcat ifixes -  msg and exit if found
	if [ $? = 0 ]; then
		echo "Error: One or more xCAT emgr ifixes are installed. You must use the /usr/sbin/emgr command to uninstall each xCAT emgr ifix prior to RPM installation."
		exit 2
	fi
fi
%endif

%post
%ifos linux
# On SUSE apache2, mod_headers is not loaded by default; enable it so the
# security response headers in xcat.conf take effect (a no-op where a2enmod
# is absent, e.g. httpd on EL where mod_headers is already loaded).
if [ -e /etc/apache2/conf.d/xcat.conf ] && command -v a2enmod >/dev/null 2>&1; then
    a2enmod headers >/dev/null 2>&1 || :
fi


# Let rsyslogd perform close of any open files
if [ -e /var/run/rsyslogd.pid ]; then
    kill -HUP $(</var/run/rsyslogd.pid) >/dev/null 2>&1 || :
elif [ -e /var/run/syslogd.pid ]; then
    kill -HUP $(</var/run/syslogd.pid) >/dev/null 2>&1 || :
fi

%endif

# create dir for the current pid and move the original ones from /tmp/xcat to /var/run/xcat
mkdir -p /var/run/xcat
if [ -r "/tmp/xcat/installservice.pid" ]; then
  mv /tmp/xcat/installservice.pid /var/run/xcat/installservice.pid
fi
if [ -r "/tmp/xcat/udpservice.pid" ]; then
  mv /tmp/xcat/udpservice.pid /var/run/xcat/udpservice.pid
fi
if [ -r "/tmp/xcat/mainservice.pid" ]; then
  mv /tmp/xcat/mainservice.pid /var/run/xcat/mainservice.pid
fi

if [ "$1" = "1" ]; then #Only if installing for the first time..

# setup sqlite if no other database

%ifos linux
# prevent running it during install into chroot image
if [ -f "/proc/cmdline" ] && [ "x$(stat -c '%i %d' /)" == "x$(stat -c '%i %d' /proc/1/root/. 2>/dev/null)" ]; then
 if [ ! -s /etc/xcat/cfgloc ]; then  # database is sqlite
   $RPM_INSTALL_PREFIX0/sbin/xcatconfig -d
 fi
fi
%endif

# so conserver will start
 mkdir -p /var/log/consoles

# remove any management node file
if [ -f /etc/xCATMN ]; then
  rm  /etc/xCATMN
fi
fi
# for install or upgrade restart the daemon
%ifos linux
if [ -e "/etc/redhat-release" ]; then
    apachedaemon='httpd'
    apacheserviceunit='httpd.service'
else # SuSE
    apachedaemon='apache2'
    apacheserviceunit='apache2.service'
fi
# enable and reload the web server on linux
[ -e "/etc/init.d/$apachedaemon" ] && chkconfig $apachedaemon on
[ -e "/usr/lib/systemd/system/$apacheserviceunit" ] && systemctl enable $apacheserviceunit
# prevent running it during install into chroot image
if [ -f "/proc/cmdline" ] && [ "x$(stat -c '%i %d' /)" == "x$(stat -c '%i %d' /proc/1/root/. 2>/dev/null)" ]; then
    [ -e "/etc/init.d/$apachedaemon" ] && /etc/init.d/$apachedaemon reload
    [ -e "/usr/lib/systemd/system/$apacheserviceunit" ] && systemctl reload $apacheserviceunit
fi
    echo "xCATsn is now installed"
%else
# start xcatd on  AIX
  XCATROOT=$RPM_INSTALL_PREFIX0 $RPM_INSTALL_PREFIX0/sbin/restartxcatd
    echo "xCATsn is now installed"

%endif

# Run mknb if xCAT-genesis-scripts-x86_64 changed
%ifos linux
# prevent running it during install into chroot image and only run it if xCAT-genesis-scripts-x86_64
# was recently updated.
if [ -f "/proc/cmdline" ] && [ "x$(stat -c '%i %d' /)" == "x$(stat -c '%i %d' /proc/1/root/. 2>/dev/null)" ]; then
  if [ -f "/etc/xcat/genesis-scripts-updated" ]; then
    rm -f /etc/xcat/genesis-scripts-updated
    # On the SN do not run mknb if we are sharing /tftpboot with the MN
    SHAREDTFTP=`/opt/xcat/sbin/tabdump site | grep sharedtftp | cut -d'"' -f 4`
    if [ "$SHAREDTFTP" != "1" ]; then
      . /etc/profile.d/xcat.sh
      echo Running '"'mknb `uname -m`'"', triggered by the installation/update of xCAT-genesis-scripts-x86_64 ...
      if ! mknb `uname -m`; then
        echo "WARNING: mknb did not complete, so the Genesis netboot image may be missing or out of date."
        echo "         Rerun 'mknb `uname -m`' once the cause is resolved."
      fi
    fi
  fi
fi
%endif

%ifos linux
# xCATsn is installed only on service nodes (it Conflicts: xCAT) and pulls in xCAT-server (xcatd)
# plus the credentials/cfgloc the servicenode postscript already staged -- so this is the right,
# autodeclarative place to bring xcatd up on a service node. Guard so it runs only on a real
# running system (skip the genimage/diskless chroot, where there is no systemd), and start via
# systemctl: on EL10 the SysV path (/etc/init.d/xcatd) cannot start xcatd.
if [ -f "/proc/cmdline" ] && [ "x$(stat -c '%i %d' /)" == "x$(stat -c '%i %d' /proc/1/root/. 2>/dev/null)" ]; then
  if [ -d /run/systemd/system ] && command -v systemctl >/dev/null 2>&1; then
    systemctl restart xcatd.service
  elif [ -x /etc/init.d/xcatd ]; then
    XCATROOT=$RPM_INSTALL_PREFIX0 /etc/init.d/xcatd restart
  fi
fi
%endif

%clean

%files
%{prefix}
# one for sles, one for rhel. yes, it's ugly...
%ifos linux
/etc/xcat/conf.orig/xcat.conf.apach24
/etc/xcat/conf.orig/xcat.conf.apach22
%config(noreplace) /etc/httpd/conf.d/xcat.conf
%config(noreplace) /etc/apache2/conf.d/xcat.conf
/etc/xcat/logrotate.conf/
/etc/xcat/rsyslog.conf/
%endif
/etc/xCATSN
%defattr(-,root,root)