mirror of
https://github.com/xcat2/xcat-core.git
synced 2026-09-05 04:27:55 +00:00
Vinícius Ferrão
2487faa678
xcat.conf was installed as an ordinary payload file and then deleted and recreated from the Apache-version template in %post. rpm therefore held no record of what was on disk, and an upgrade replaced an edited file silently, leaving neither .rpmnew nor .rpmsave. A site that had added Indexes to the /install block lost it on upgrade and directory listings began returning 403. Select the Apache 2.2 or 2.4 configuration at build time, using the same distribution macros the rest of the spec already relies on, and mark both /etc/httpd/conf.d/xcat.conf and /etc/apache2/conf.d/xcat.conf as %config(noreplace). rpm then keeps a modified file and installs the new vendor version alongside it as xcat.conf.rpmnew. The old payload recorded the 2.2 file while %post wrote the 2.4 one, so rpm cannot distinguish a stock file from an edited one across the transition. A migration compares the active file with the templates the outgoing package saved under conf.orig and removes it only when it is a regular file still byte-for-byte identical to one of them. A stock upgrade then completes without an unnecessary .rpmnew, and anything that differs is left untouched. That migration runs in %pretrans, not %pre. rpm fixes each config file's fate before %pre, so removing the active file there can happen after rpm has already resolved to write only xcat.conf.rpmnew, leaving the system with no active configuration at all. %pretrans runs before that decision. It is an embedded Lua scriptlet because a pre-transaction scriptlet cannot rely on any dependency being unpacked yet, which also means the comparison needs no external tool. bc was needed only by the version check the service-node package no longer performs. The Apache directives are unchanged. Document a later-loading conf.d file as the place for site rules, since that survives upgrades without a merge.
248 lines
8.8 KiB
ReStructuredText
248 lines
8.8 KiB
ReStructuredText
Apache Hardening
|
|
================
|
|
|
|
xCAT uses Apache HTTP Server to serve install media, postscripts, and boot
|
|
files to nodes during provisioning. The default configuration prioritizes
|
|
ease of deployment, but administrators should apply the hardening measures
|
|
below to reduce the attack surface.
|
|
|
|
Directory Indexing Disabled by Default
|
|
--------------------------------------
|
|
|
|
Starting with xCAT 2.18, directory indexing (``Options Indexes``) is disabled
|
|
by default for the ``/install`` and ``/tftpboot`` directories. This prevents
|
|
unauthenticated users from browsing directory listings and discovering file
|
|
paths. All provisioning workflows continue to work because nodes fetch files
|
|
by their known paths.
|
|
|
|
If you are upgrading from an earlier version of xCAT, update your Apache
|
|
configuration manually. Remove ``Indexes`` from the ``/install`` and
|
|
``/tftpboot`` blocks, but add explicit exceptions for the directories that
|
|
provisioning scripts crawl recursively.
|
|
|
|
**Apache 2.4** (RHEL 7+, SLES 12+, Ubuntu 16.04+)::
|
|
|
|
# /etc/httpd/conf.d/xcat.conf
|
|
ServerTokens Prod
|
|
|
|
<Directory "/tftpboot">
|
|
Options FollowSymLinks
|
|
<IfModule mod_headers.c>
|
|
Header always set X-Frame-Options SAMEORIGIN
|
|
Header always set X-Content-Type-Options nosniff
|
|
Header always set Content-Security-Policy "script-src 'self' 'unsafe-eval'"
|
|
Header always set X-Permitted-Cross-Domain-Policies none
|
|
</IfModule>
|
|
AllowOverride None
|
|
Require all granted
|
|
</Directory>
|
|
<Directory "/install">
|
|
Options FollowSymLinks
|
|
<IfModule mod_headers.c>
|
|
Header always set X-Frame-Options SAMEORIGIN
|
|
Header always set X-Content-Type-Options nosniff
|
|
Header always set Content-Security-Policy "script-src 'self' 'unsafe-eval'"
|
|
Header always set X-Permitted-Cross-Domain-Policies none
|
|
</IfModule>
|
|
AllowOverride None
|
|
Require all granted
|
|
</Directory>
|
|
<Directory "/install/postscripts">
|
|
Options Indexes FollowSymLinks
|
|
AllowOverride None
|
|
Require all granted
|
|
</Directory>
|
|
<Directory "/install/post">
|
|
Options Indexes FollowSymLinks
|
|
AllowOverride None
|
|
Require all granted
|
|
</Directory>
|
|
|
|
**Apache 2.2** (RHEL 6, SLES 11)::
|
|
|
|
# /etc/httpd/conf.d/xcat.conf
|
|
ServerTokens Prod
|
|
|
|
<Directory "/tftpboot">
|
|
Options FollowSymLinks
|
|
<IfModule mod_headers.c>
|
|
Header always set X-Frame-Options SAMEORIGIN
|
|
Header always set X-Content-Type-Options nosniff
|
|
Header always set Content-Security-Policy "script-src 'self' 'unsafe-eval'"
|
|
Header always set X-Permitted-Cross-Domain-Policies none
|
|
</IfModule>
|
|
AllowOverride None
|
|
Order allow,deny
|
|
Allow from all
|
|
</Directory>
|
|
<Directory "/install">
|
|
Options FollowSymLinks
|
|
<IfModule mod_headers.c>
|
|
Header always set X-Frame-Options SAMEORIGIN
|
|
Header always set X-Content-Type-Options nosniff
|
|
Header always set Content-Security-Policy "script-src 'self' 'unsafe-eval'"
|
|
Header always set X-Permitted-Cross-Domain-Policies none
|
|
</IfModule>
|
|
AllowOverride None
|
|
Order allow,deny
|
|
Allow from all
|
|
</Directory>
|
|
<Directory "/install/postscripts">
|
|
Options Indexes FollowSymLinks
|
|
AllowOverride None
|
|
Order allow,deny
|
|
Allow from all
|
|
</Directory>
|
|
<Directory "/install/post">
|
|
Options Indexes FollowSymLinks
|
|
AllowOverride None
|
|
Order allow,deny
|
|
Allow from all
|
|
</Directory>
|
|
|
|
.. warning::
|
|
|
|
Do not remove ``Indexes`` from ``/install/postscripts`` or
|
|
``/install/post``. xCAT provisioning scripts use recursive ``wget`` to
|
|
download all files from these directories and depend on Apache directory
|
|
listings to discover file paths.
|
|
|
|
Local Customizations
|
|
--------------------
|
|
|
|
``xcat.conf`` belongs to the xCAT package. Keep site-specific rules in a
|
|
separate file that Apache reads after it:
|
|
|
|
* EL: ``/etc/httpd/conf.d/zz-xcat-local.conf``
|
|
* SUSE: ``/etc/apache2/conf.d/zz-xcat-local.conf``
|
|
|
|
Apache reads ``conf.d`` in alphabetical order, so the ``zz-`` prefix puts the
|
|
file after ``xcat.conf`` and its directives take precedence. Use the relative
|
|
form of ``Options`` (``+`` or ``-``): it adjusts the options inherited from the
|
|
xCAT block, where the absolute form replaces all of them. For example, to allow
|
|
browsing of one site directory::
|
|
|
|
# /etc/httpd/conf.d/zz-xcat-local.conf
|
|
<Directory "/install/custom/mypkgs">
|
|
Options +Indexes
|
|
</Directory>
|
|
|
|
Editing ``xcat.conf`` in place still works: an upgrade keeps the modified file.
|
|
If the packaged configuration changed too, the new version is written alongside
|
|
it as ``xcat.conf.rpmnew`` and has to be merged by hand.
|
|
|
|
Security Response Headers and Server Banner
|
|
-------------------------------------------
|
|
|
|
xCAT configures ``ServerTokens Prod`` to omit the Apache version and operating
|
|
system from the HTTP ``Server`` header. It also applies the following response
|
|
headers to ``/install`` and ``/tftpboot``:
|
|
|
|
* ``X-Frame-Options: SAMEORIGIN``
|
|
* ``X-Content-Type-Options: nosniff``
|
|
* ``Content-Security-Policy: script-src 'self' 'unsafe-eval'``
|
|
* ``X-Permitted-Cross-Domain-Policies: none``
|
|
|
|
These directives require ``mod_headers``. The xCAT packages enable that module
|
|
on distributions where it is not loaded by default and activate the updated
|
|
configuration during installation or upgrade. Keep the ``Header always set``
|
|
directives when adding local access-control rules to either directory.
|
|
|
|
Sensitive Directories
|
|
---------------------
|
|
|
|
The following directories under ``/install`` may contain sensitive data and
|
|
should be protected with restrictive filesystem permissions:
|
|
|
|
``/install/custom/``
|
|
Custom postscripts, templates, and package lists. May contain hardcoded
|
|
credentials or internal configuration details.
|
|
|
|
``/install/syncfiles/``
|
|
Files synchronized to nodes. May include password files, SSL certificates,
|
|
or application secrets.
|
|
|
|
``/install/autoinst/``
|
|
Generated kickstart and preseed files. Contains root password hashes and
|
|
full network configuration for each node. Nodes fetch these over HTTP
|
|
during installation, so filesystem permissions cannot be restricted without
|
|
breaking provisioning. Use IP-based access control (see below) to limit
|
|
access to the management network instead.
|
|
|
|
Set restrictive permissions where possible::
|
|
|
|
chmod 750 /install/custom
|
|
chmod 750 /install/syncfiles
|
|
|
|
.. note::
|
|
|
|
Do not restrict filesystem permissions on ``/install/postscripts``,
|
|
``/install/autoinst``, or the OS media directories (e.g.,
|
|
``/install/rhels9/``), as nodes require HTTP access to these during
|
|
provisioning. Protect these paths with network-level controls instead.
|
|
|
|
Database Backups
|
|
----------------
|
|
|
|
Never store xCAT database backups under ``/install``. The database contains
|
|
BMC credentials, password table entries, and full cluster topology. Store
|
|
backups in a directory not served by Apache, for example::
|
|
|
|
dumpxCATdb -p /root/xcat-backups
|
|
|
|
Network Binding
|
|
---------------
|
|
|
|
By default, Apache listens on all interfaces. In environments where the
|
|
management network is separate from other networks, bind Apache to the
|
|
management interface only::
|
|
|
|
# /etc/httpd/conf/httpd.conf
|
|
Listen 10.0.0.1:80
|
|
|
|
Replace ``10.0.0.1`` with the management node's IP on the provisioning
|
|
network.
|
|
|
|
IP-Based Access Control
|
|
-----------------------
|
|
|
|
For additional protection, restrict access to the provisioning subnet::
|
|
|
|
# Apache 2.4+
|
|
<Directory "/install">
|
|
Options FollowSymLinks
|
|
<IfModule mod_headers.c>
|
|
Header always set X-Frame-Options SAMEORIGIN
|
|
Header always set X-Content-Type-Options nosniff
|
|
Header always set Content-Security-Policy "script-src 'self' 'unsafe-eval'"
|
|
Header always set X-Permitted-Cross-Domain-Policies none
|
|
</IfModule>
|
|
AllowOverride None
|
|
Require ip 10.0.0.0/16
|
|
</Directory>
|
|
<Directory "/install/postscripts">
|
|
Options Indexes FollowSymLinks
|
|
AllowOverride None
|
|
Require ip 10.0.0.0/16
|
|
</Directory>
|
|
<Directory "/install/post">
|
|
Options Indexes FollowSymLinks
|
|
AllowOverride None
|
|
Require ip 10.0.0.0/16
|
|
</Directory>
|
|
|
|
Replace ``10.0.0.0/16`` with your management network CIDR in all blocks.
|
|
This ensures only nodes on the provisioning network can access install media.
|
|
|
|
.. note::
|
|
|
|
If ``linuximage.otherpkgdir`` points to a custom path under ``/install``
|
|
outside of ``/install/post`` (e.g., ``/install/custom/mypkgs``), add an
|
|
additional ``<Directory>`` block for that path with ``Options Indexes``
|
|
to allow recursive package downloads.
|
|
|
|
.. warning::
|
|
|
|
If service nodes or hierarchical xCAT setups are in use, ensure all service
|
|
node IPs are included in the allowed range.
|