mirror of
https://github.com/xcat2/xcat-core.git
synced 2026-10-21 23:28:19 +00:00
Daniel Hilst
b1d3190298
xcat_persist_nic_extra_param only appended a key that was absent. When the profile already held CONNECTED_MODE=no, a request for yes left no. It appended after the last line, so a profile with no final newline got NAME=xcat-ens4CONNECTED_MODE=yes. In a keyfile it appended at the end of the file, which is not the [user] section when another section follows it. The function now rewrites the profile with awk. It replaces the line of the exact key, or inserts the key at the end of [user] for a keyfile and at the end of an ifcfg file. It adds [user] when the keyfile has none. The repair block of configeth moves into xcat_nm_persist_nic_extra_params, so a test can reach the store decision. configeth calls it after the last nmcli con up. xcat_uses_nm_keyfile now calls xcat_nm_conn_file instead of repeating its two nmcli calls. Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
1734 lines
70 KiB
Bash
Executable File
1734 lines
70 KiB
Bash
Executable File
#!/bin/bash
|
|
# IBM(c) 2014 EPL license http://www.eclipse.org/legal/epl-v10.html
|
|
# Internal script used by confignics only.
|
|
# It configs the Ethernet adpaters on the node
|
|
|
|
if [ "$(uname -s|tr 'A-Z' 'a-z')" = "linux" ];then
|
|
str_dir_name=`dirname $0`
|
|
. $str_dir_name/xcatlib.sh
|
|
. $str_dir_name/nicutils.sh
|
|
fi
|
|
error_code=0
|
|
if [ -n "$LOGLABEL" ]; then
|
|
log_label=$LOGLABEL
|
|
else
|
|
log_label="xcat"
|
|
fi
|
|
#########################################################################
|
|
# ifdown/ifup will not be executed in diskful provision postscripts stage
|
|
#########################################################################
|
|
reboot_nic_bool=1
|
|
if [ -z "$UPDATENODE" ] || [ $UPDATENODE -ne 1 ] ; then
|
|
if [ "$NODESETSTATE" = "install" ] && ! grep "REBOOT=TRUE" /opt/xcat/xcatinfo >/dev/null 2>&1; then
|
|
reboot_nic_bool=0
|
|
fi
|
|
fi
|
|
########################################################################
|
|
# networkmanager_active=0: use network.service
|
|
# networkmanager_active=1: use NetworkManager
|
|
# networkmanager_active=2: RH8 postscripts stage, NetworkManager is active but nmcli cannot modify NIC configure file
|
|
########################################################################
|
|
networkmanager_active=0
|
|
if [ -n "$NMCLI_USED" ] ; then
|
|
if [ "$NMCLI_USED" = "1" ]; then
|
|
networkmanager_active=1
|
|
elif [ "$NMCLI_USED" = "2" ]; then
|
|
networkmanager_active=2
|
|
fi
|
|
fi
|
|
|
|
str_conf_file=""
|
|
str_conf_file_xcatbak=""
|
|
tmp_con_name=""
|
|
|
|
# ---------------------------------------------------------------------------
|
|
# netplan support (Ubuntu 18.04+, issue #7454)
|
|
#
|
|
# On a netplan-rendered Debian/Ubuntu node ifupdown is not installed and
|
|
# /etc/network/interfaces.d/* is ignored entirely, so writing there configures nothing.
|
|
# Write /etc/netplan/*.yaml and `netplan apply` instead.
|
|
#
|
|
# The drop-in this owns is regenerated in full on every change rather than edited in place,
|
|
# because inserting into the middle of a YAML list with sed reverses multi-address order and
|
|
# cannot tell one route's fields from another's. The inputs are kept in "# xcat-state:" comment
|
|
# lines at the top of the same file: netplan ignores comments, the file stays the single source
|
|
# of truth, and re-rendering is idempotent.
|
|
#
|
|
# netplan parses every file under /etc/netplan as one document, so a single rejected key takes
|
|
# the whole node's network with it -- not just the interface being configured. That is why the
|
|
# writers below validate rather than pass values through.
|
|
# ---------------------------------------------------------------------------
|
|
|
|
netplan_active=0
|
|
if command -v netplan >/dev/null 2>&1 && [ -d /etc/netplan ]; then
|
|
netplan_active=1
|
|
# netplan.io is Priority:important and a dependency of cloud-init, so its presence says
|
|
# nothing about what actually renders this node. Only ifupdown both installed AND running
|
|
# means /etc/network/interfaces is still the live configuration, in which case writing YAML
|
|
# would orphan it. (checkservicestatus is no help here: servicemap has no entry for
|
|
# "networking", so it returns 127 whatever the service is doing.)
|
|
if command -v ifup >/dev/null 2>&1 && systemctl is-active networking >/dev/null 2>&1; then
|
|
netplan_active=0
|
|
fi
|
|
fi
|
|
|
|
# netplan_file <nic> -- the per-NIC drop-in this script owns. NETPLAN_DIR overrides the
|
|
# directory so the writers can be unit tested without touching the real configuration.
|
|
netplan_file(){
|
|
echo "${NETPLAN_DIR:-/etc/netplan}/90-xcat-${1}.yaml"
|
|
}
|
|
|
|
_netplan_touch(){ # <file> -- create the drop-in already unreadable to other users
|
|
[ -f "$1" ] || ( umask 077; : > "$1" )
|
|
}
|
|
|
|
_netplan_state(){ # <nic> <kind> -- emit the recorded values of one kind, in insertion order
|
|
local f
|
|
f="$(netplan_file "$1")"
|
|
[ -f "$f" ] || return 0
|
|
sed -n "s/^# xcat-state: $2 //p" "$f"
|
|
}
|
|
|
|
_netplan_record(){ # <nic> <kind> <value> -- record once, preserving order
|
|
local nic="$1" kind="$2" value="$3" f
|
|
f="$(netplan_file "$nic")"
|
|
if [ -f "$f" ] && grep -qxF "# xcat-state: $kind $value" "$f"; then
|
|
return 0
|
|
fi
|
|
printf '# xcat-state: %s %s\n' "$kind" "$value" >> "$f"
|
|
}
|
|
|
|
# _netplan_forget <file> <prefix> -- drop the recorded lines whose value starts with <prefix>.
|
|
# awk index() is a literal string match: a nicextraparams key is admin-supplied and a '/' or a
|
|
# regex metacharacter in a sed address would either error out or delete unrelated state.
|
|
_netplan_forget(){
|
|
local f="$1" pfx="$2" tmp
|
|
[ -f "$f" ] || return 0
|
|
tmp="${f}.forget.$$"
|
|
if awk -v p="# xcat-state: $pfx" 'index($0, p) != 1' "$f" > "$tmp"; then
|
|
mv -f "$tmp" "$f"
|
|
else
|
|
rm -f "$tmp"
|
|
fi
|
|
}
|
|
|
|
# _netplan_param_key <name> -- the netplan key a nicextraparams name maps to, or non-zero if it
|
|
# has none. nicextraparams are ifcfg/ifupdown names -- the documented examples are
|
|
# "MTU=1456 ONBOOT=no" -- and netplan rejects the entire configuration for one unknown key, so
|
|
# anything without a netplan meaning has to be dropped rather than passed through.
|
|
_netplan_param_key(){
|
|
local k
|
|
k=$(echo "$1" | tr 'A-Z' 'a-z')
|
|
case "$k" in
|
|
mtu|optional|critical|wakeonlan|dhcp4|dhcp6|accept-ra|ipv6-privacy) echo "$k"; return 0 ;;
|
|
dhcp-identifier|activation-mode|ipv6-mtu|macaddress) echo "$k"; return 0 ;;
|
|
esac
|
|
return 1
|
|
}
|
|
|
|
# _netplan_yaml_scalar <value> -- a value safe to paste into the generated YAML. Integers and
|
|
# booleans keep their type (netplan wants mtu as an int, optional as a bool); anything else is
|
|
# quoted so that a ':' or '#' in a value cannot invent a key or comment out the rest of a line.
|
|
_netplan_yaml_scalar(){
|
|
case "$1" in
|
|
true|false) echo "$1"; return 0 ;;
|
|
esac
|
|
case "$1" in
|
|
''|*[!0-9]*) ;;
|
|
*) echo "$1"; return 0 ;;
|
|
esac
|
|
printf '"%s"\n' "$(echo "$1" | sed -e 's/\\/\\\\/g' -e 's/"/\\"/g')"
|
|
}
|
|
|
|
# _netplan_route_dest <via> -- the explicit default-route destination for the gateway's family.
|
|
# "to: default" is only understood from netplan 0.103 onwards; Ubuntu 18.04 never ships past
|
|
# 0.99 and a stock 20.04 ships 0.99 too, where it fails the whole file. The CIDR works on all.
|
|
_netplan_route_dest(){
|
|
case "$1" in
|
|
*:*) echo "::/0" ;;
|
|
*) echo "0.0.0.0/0" ;;
|
|
esac
|
|
}
|
|
|
|
# _netplan_render <nic> -- rebuild the whole drop-in from its recorded state.
|
|
# A NIC named <parent>.<vid> is a VLAN and MUST be declared under vlans: with id and link, or
|
|
# netplan will not recreate it after a reboot; anything else is a plain ethernet.
|
|
_netplan_render(){
|
|
local nic="$1" f tmp section parent vid addr route to via mtu param name value key
|
|
local has_dhcp4=0 has_dhcp6=0
|
|
f="$(netplan_file "$nic")"
|
|
tmp="${f}.tmp.$$"
|
|
|
|
section="ethernets"
|
|
parent=""
|
|
vid=""
|
|
case "$nic" in
|
|
*.*)
|
|
parent="${nic%.*}"
|
|
vid="${nic##*.}"
|
|
case "$vid" in
|
|
''|*[!0-9]*) parent=""; vid="" ;; # not <parent>.<numeric vid>
|
|
*) section="vlans" ;;
|
|
esac
|
|
;;
|
|
esac
|
|
|
|
# a nicextraparams key may set dhcp4/dhcp6 itself; do not then emit the default as well,
|
|
# which would be a duplicate mapping key in the same stanza
|
|
while read -r param; do
|
|
key=$(_netplan_param_key "${param%% *}") || continue
|
|
[ "$key" = "dhcp4" ] && has_dhcp4=1
|
|
[ "$key" = "dhcp6" ] && has_dhcp6=1
|
|
done <<EOF
|
|
$(_netplan_state "$nic" param)
|
|
EOF
|
|
|
|
( umask 077
|
|
{
|
|
# keep the recorded state at the top so the next call can read it back
|
|
[ -f "$f" ] && grep '^# xcat-state: ' "$f"
|
|
echo "network:"
|
|
echo " version: 2"
|
|
if [ "$section" = "vlans" ]; then
|
|
# netplan resolves link: at parse time and does not look ahead to files that sort
|
|
# later, and 90-xcat-<parent>.<vid>.yaml always sorts before 90-xcat-<parent>.yaml
|
|
# ('1' < 'y'). The parent may also carry no address of its own, in which case xCAT
|
|
# never writes a file for it at all. Declaring it here as an empty netdef resolves
|
|
# the reference without overriding any key the parent's own netdef sets.
|
|
echo " ethernets:"
|
|
echo " ${parent}: {}"
|
|
fi
|
|
echo " ${section}:"
|
|
echo " ${nic}:"
|
|
if [ "$section" = "vlans" ]; then
|
|
echo " id: ${vid}"
|
|
echo " link: ${parent}"
|
|
fi
|
|
# netplan merges netdefs of the same name across files key by key rather than replacing
|
|
# them, so without these an earlier-sorting dhcp4:true -- cloud-init's
|
|
# 50-cloud-init.yaml, or xCAT's own netboot drop-in -- survives and the node runs a DHCP
|
|
# lease alongside the static address xCAT just assigned.
|
|
[ $has_dhcp4 -eq 0 ] && echo " dhcp4: false"
|
|
[ $has_dhcp6 -eq 0 ] && echo " dhcp6: false"
|
|
|
|
if [ -n "$(_netplan_state "$nic" addr)" ]; then
|
|
echo " addresses:"
|
|
_netplan_state "$nic" addr | while read -r addr; do
|
|
[ -n "$addr" ] && echo " - ${addr}"
|
|
done
|
|
fi
|
|
|
|
mtu="$(_netplan_state "$nic" mtu | tail -1)"
|
|
[ -n "$mtu" ] && echo " mtu: ${mtu}"
|
|
|
|
if [ -n "$(_netplan_state "$nic" route)" ]; then
|
|
echo " routes:"
|
|
_netplan_state "$nic" route | while read -r route; do
|
|
to="${route%% *}"
|
|
via="${route#* }"
|
|
[ -n "$to" ] || continue
|
|
[ "$to" = "default" ] && to="$(_netplan_route_dest "$via")"
|
|
printf ' - to: %s\n via: %s\n' "$to" "$via"
|
|
done
|
|
fi
|
|
|
|
# nicextraparams, already normalised and filtered to keys netplan understands by
|
|
# write_netplan_param below
|
|
_netplan_state "$nic" param | while read -r param; do
|
|
name="${param%% *}"
|
|
value="${param#* }"
|
|
[ -n "$name" ] && echo " ${name}: $(_netplan_yaml_scalar "$value")"
|
|
done
|
|
} > "$tmp" )
|
|
|
|
mv -f "$tmp" "$f"
|
|
chmod 600 "$f" 2>/dev/null
|
|
}
|
|
|
|
# netplan_reset_nic <nic> -- forget everything recorded for this NIC. Called for the first
|
|
# address of a NIC, mirroring the truncating '>' of the ifupdown branch: without it an address
|
|
# that was removed from the nics table is never dropped and the node keeps it forever.
|
|
netplan_reset_nic(){
|
|
rm -f "$(netplan_file "$1")" 2>/dev/null
|
|
return 0
|
|
}
|
|
|
|
# _netplan_can_reconfigure -- can one device be re-applied without disturbing the others?
|
|
# Only when systemd-networkd is the renderer and networkctl carries the verbs (systemd 244+;
|
|
# Ubuntu 18.04 ships 237 and does not). Probed rather than version-gated, so this follows the
|
|
# node's actual backend -- under the NetworkManager renderer it is correctly false.
|
|
_netplan_can_reconfigure(){
|
|
command -v networkctl >/dev/null 2>&1 || return 1
|
|
networkctl --help 2>&1 | grep -qw reconfigure || return 1
|
|
systemctl is-active systemd-networkd >/dev/null 2>&1 || return 1
|
|
return 0
|
|
}
|
|
|
|
# netplan_apply [nic] -- make the drop-in live, and verify the link actually came up.
|
|
#
|
|
# `netplan apply` takes no interface argument: it re-applies every netdef on the node, so
|
|
# configuring one secondary NIC would also bounce the install NIC the postscripts are still
|
|
# running over. Where the backend can scope it, generate the backend configuration and
|
|
# reconfigure only <nic>. Anything that cannot be scoped -- a device netplan has yet to create,
|
|
# the NetworkManager renderer, a systemd without the verbs -- falls back to the node-wide apply.
|
|
#
|
|
# `netplan apply` returns 0 even when it changed nothing, so its exit status alone cannot stand
|
|
# in for the interface state the ifup path used to check.
|
|
netplan_apply(){
|
|
local nic="$1"
|
|
if [ -n "$nic" ] && _netplan_can_reconfigure; then
|
|
netplan generate
|
|
if [ $? -ne 0 ]; then
|
|
log_error "netplan generate failed."
|
|
return 1
|
|
fi
|
|
networkctl reload >/dev/null 2>&1
|
|
networkctl reconfigure "$nic" >/dev/null 2>&1
|
|
if [ $? -eq 0 ]; then
|
|
wait_for_ifstate "$nic" UP 20 5 >/dev/null
|
|
if [ $? -ne 0 ]; then
|
|
log_error "bring $nic up failed."
|
|
return 1
|
|
fi
|
|
return 0
|
|
fi
|
|
log_info "configeth on $NODE: networkctl could not reconfigure $nic alone, applying all."
|
|
fi
|
|
netplan apply
|
|
if [ $? -ne 0 ]; then
|
|
log_error "netplan apply failed."
|
|
return 1
|
|
fi
|
|
[ -n "$nic" ] || return 0
|
|
wait_for_ifstate "$nic" UP 20 5 >/dev/null
|
|
if [ $? -ne 0 ]; then
|
|
log_error "bring $nic up failed."
|
|
return 1
|
|
fi
|
|
return 0
|
|
}
|
|
|
|
# write_netplan_addr <nic> <addr/prefix> [mtu] -- add an address (IPv4 or IPv6). Idempotent per
|
|
# address, and preserves the order in which addresses were added.
|
|
write_netplan_addr(){
|
|
local nic="$1" cidr="$2" mtu="$3" f
|
|
f="$(netplan_file "$nic")"
|
|
_netplan_touch "$f"
|
|
_netplan_record "$nic" addr "$cidr"
|
|
if [ -n "$mtu" ] && [ "$mtu" != "$str_default_token" ]; then
|
|
# last mtu wins; drop any previously recorded one so the state stays single-valued
|
|
_netplan_forget "$f" "mtu "
|
|
_netplan_record "$nic" mtu "$mtu"
|
|
fi
|
|
_netplan_render "$nic"
|
|
}
|
|
|
|
# write_netplan_route <nic> <to> <via> -- add a route. Idempotent on the (to, via) pair.
|
|
write_netplan_route(){
|
|
local nic="$1" to="$2" via="$3" f
|
|
f="$(netplan_file "$nic")"
|
|
[ -f "$f" ] || return 0
|
|
_netplan_record "$nic" route "$to $via"
|
|
_netplan_render "$nic"
|
|
}
|
|
|
|
# write_netplan_param <nic> <name> <value> -- record a nicextraparams key for this interface.
|
|
write_netplan_param(){
|
|
local nic="$1" name="$2" value="$3" f key
|
|
key=$(_netplan_param_key "$name")
|
|
if [ $? -ne 0 ]; then
|
|
log_warn "configeth on $NODE: nicextraparams key '$name' has no netplan equivalent, ignored for $nic."
|
|
return 0
|
|
fi
|
|
f="$(netplan_file "$nic")"
|
|
_netplan_touch "$f"
|
|
if [ "$key" = "mtu" ]; then
|
|
# the same knob write_netplan_addr records; keeping one source avoids a duplicate key
|
|
_netplan_forget "$f" "mtu "
|
|
_netplan_record "$nic" mtu "$value"
|
|
else
|
|
_netplan_forget "$f" "param $key "
|
|
_netplan_record "$nic" param "$key $value"
|
|
fi
|
|
_netplan_render "$nic"
|
|
}
|
|
function configipv4(){
|
|
str_if_name=$1
|
|
str_v4ip=$2
|
|
str_v4net=$3
|
|
str_v4mask=$4
|
|
num_v4num=$5 #If NIC has multiple IPs, the ordinal number of IP is num_v4num
|
|
str_extra_params=$6
|
|
str_nic_mtu=$7
|
|
|
|
#parse the extra parameters
|
|
if [ "$str_extra_params" != "$str_default_token" ]; then
|
|
parse_nic_extra_params "$str_extra_params"
|
|
fi
|
|
|
|
if [ "$str_os_type" = "sles" ];then
|
|
str_conf_file="/etc/sysconfig/network/ifcfg-${str_if_name}"
|
|
if [ $num_v4num -eq 0 ];then
|
|
echo "DEVICE=${str_if_name}" > $str_conf_file
|
|
echo "BOOTPROTO=static" >> $str_conf_file
|
|
echo "IPADDR=${str_v4ip}" >> $str_conf_file
|
|
echo "NETMASK=${str_v4mask}" >> $str_conf_file
|
|
echo "NETWORK=${str_v4net}" >> $str_conf_file
|
|
echo "STARTMODE=onboot" >> $str_conf_file
|
|
echo "USERCONTROL=no" >> $str_conf_file
|
|
echo "_nm_name=static-0" >> $str_conf_file
|
|
if [ "$str_nic_mtu" != "$str_default_token" ]; then
|
|
echo "MTU=${str_nic_mtu}" >> $str_conf_file
|
|
fi
|
|
#add extra params
|
|
i=0
|
|
while [ $i -lt ${#array_extra_param_names[@]} ]
|
|
do
|
|
name="${array_extra_param_names[$i]}"
|
|
value="${array_extra_param_values[$i]}"
|
|
echo " $i: name=$name value=$value"
|
|
grep -i "${name}" $str_conf_file
|
|
if [ $? -eq 0 ];then
|
|
sed -i "s/.*${name}.*/${name}=${value}/i" $str_conf_file
|
|
else
|
|
echo "${name}=${value}" >> $str_conf_file
|
|
fi
|
|
i=$((i+1))
|
|
done
|
|
else
|
|
echo "IPADDR_${num_v4num}=${str_v4ip}" >> $str_conf_file
|
|
echo "NETMASK_${num_v4num}=${str_v4mask}" >> $str_conf_file
|
|
echo "NETWORK_${num_v4num}=${str_v4net}" >> $str_conf_file
|
|
echo "LABEL_${num_v4num}=${num_v4num}" >> $str_conf_file
|
|
if [ "$str_nic_mtu" != "$str_default_token" ]; then
|
|
echo "MTU_${num_v4num}=${str_nic_mtu}" >> $str_conf_file
|
|
fi
|
|
#add extra params
|
|
i=0
|
|
while [ $i -lt ${#array_extra_param_names[@]} ]
|
|
do
|
|
name="${array_extra_param_names[$i]}"
|
|
value="${array_extra_param_values[$i]}"
|
|
echo " $i: name=$name value=$value"
|
|
grep -i "${name}" $str_conf_file
|
|
if [ $? -eq 0 ];then
|
|
sed -i "s/.*${name}.*/${name}=${value}/i" $str_conf_file
|
|
else
|
|
echo "${name}=${value}" >> $str_conf_file
|
|
fi
|
|
i=$((i+1))
|
|
done
|
|
fi
|
|
|
|
if [[ ${str_if_name} == [a-zA-Z0-9]*.[0-9]* ]]; then
|
|
echo "VLAN=yes" >> $str_conf_file
|
|
fi
|
|
#ubuntu/debian rendered by netplan (18.04+): ifupdown is absent and interfaces.d is
|
|
#ignored, so write /etc/netplan/*.yaml instead (issue #7454)
|
|
elif [ "$str_os_type" = "debian" ] && [ "$netplan_active" = "1" ];then
|
|
#the first address of a NIC starts a fresh drop-in, the way the ifupdown branch below
|
|
#truncates with '>' -- otherwise an address dropped from the nics table is never removed
|
|
if [ $num_v4num -eq 0 ];then
|
|
netplan_reset_nic "${str_if_name}"
|
|
fi
|
|
str_prefix=$(v4mask2prefix $str_v4mask)
|
|
write_netplan_addr "${str_if_name}" "${str_v4ip}/${str_prefix}" "${str_nic_mtu}"
|
|
i=0
|
|
while [ $i -lt ${#array_extra_param_names[@]} ]
|
|
do
|
|
write_netplan_param "${str_if_name}" "${array_extra_param_names[$i]}" "${array_extra_param_values[$i]}"
|
|
i=$((i+1))
|
|
done
|
|
#debian ubuntu (legacy ifupdown)
|
|
elif [ "$str_os_type" = "debian" ];then
|
|
str_conf_file="/etc/network/interfaces.d/${str_if_name}"
|
|
if [ $num_v4num -eq 0 ];then
|
|
echo "auto ${str_if_name}" > $str_conf_file
|
|
echo "iface ${str_if_name} inet static" >> $str_conf_file
|
|
else
|
|
echo "auto ${str_if_name}:${num_v4num}" >> $str_conf_file
|
|
echo "iface ${str_if_name}:${num_v4num} inet static" >> $str_conf_file
|
|
fi
|
|
echo " address ${str_v4ip}" >> $str_conf_file
|
|
echo " netmask ${str_v4mask}" >> $str_conf_file
|
|
echo " network ${str_v4net}" >> $str_conf_file
|
|
if [ "$str_nic_mtu" != "$str_default_token" ]; then
|
|
echo " mtu ${str_nic_mtu}" >> $str_conf_file
|
|
fi
|
|
#add extra params
|
|
i=0
|
|
while [ $i -lt ${#array_extra_param_names[@]} ]
|
|
do
|
|
name="${array_extra_param_names[$i]}"
|
|
value="${array_extra_param_values[$i]}"
|
|
echo " $i: name=$name value=$value"
|
|
grep -i "${name}" $str_conf_file
|
|
if [ $? -eq 0 ];then
|
|
sed -i "s/.*${name}.*/${name} ${value}/i" $str_conf_file
|
|
else
|
|
echo "${name} ${value}" >> $str_conf_file
|
|
fi
|
|
i=$((i+1))
|
|
done
|
|
if [[ ${str_if_name} == [a-zA-Z0-9]*.[0-9]* ]]; then
|
|
parent_device=`echo ${str_if_name} | sed -e 's/\([a-zA-Z0-9]*\)\.[0-9]*/\1/g'`
|
|
echo " vlan-raw-device ${parent_device}" >> $str_conf_file
|
|
fi
|
|
else
|
|
#redhat
|
|
str_prefix=$(v4mask2prefix $str_v4mask)
|
|
# Write the info to the ifcfg file for redhat
|
|
con_name="xcat-"${str_if_name}
|
|
str_conf_file=""
|
|
if [ $networkmanager_active -eq 1 ]; then
|
|
if [ $num_v4num -eq 0 ]; then
|
|
is_nmcli_connection_exist $con_name
|
|
if [ $? -eq 0 ]; then
|
|
tmp_con_name=$con_name"-tmp"
|
|
nmcli con modify $con_name connection.id $tmp_con_name
|
|
fi
|
|
nmcli con add type ethernet con-name $con_name ifname ${str_if_name} ipv4.method manual ipv4.addresses ${str_v4ip}/${str_prefix} connection.autoconnect-priority 9
|
|
else
|
|
nmcli con modify $con_name +ipv4.addresses ${str_v4ip}/${str_prefix}
|
|
fi
|
|
str_conf_file="/etc/sysconfig/network-scripts/ifcfg-xcat-${str_if_name}"
|
|
str_conf_file_1="/etc/sysconfig/network-scripts/ifcfg-xcat-${str_if_name}-1"
|
|
if [ -f $str_conf_file_1 ]; then
|
|
grep -x "NAME=$con_name" $str_conf_file_1 >/dev/null 2>/dev/null
|
|
if [ $? -eq 0 ]; then
|
|
str_conf_file=$str_conf_file_1
|
|
fi
|
|
fi
|
|
elif [ $networkmanager_active -eq 2 ]; then
|
|
# TODO does not work for EL9 yet
|
|
str_conf_file="/etc/sysconfig/network-scripts/ifcfg-xcat-${str_if_name}"
|
|
if [ $num_v4num -eq 0 ]; then
|
|
echo "DEVICE=${str_if_name}" > $str_conf_file
|
|
echo "BOOTPROTO=none" >> $str_conf_file
|
|
echo "IPADDR=${str_v4ip}" >> $str_conf_file
|
|
echo "NETMASK=${str_v4mask}" >> $str_conf_file
|
|
echo "NAME=xcat-${str_if_name}" >> $str_conf_file
|
|
echo "ONBOOT=yes" >> $str_conf_file
|
|
echo "AUTOCONNECT_PRIORITY=9" >> $str_conf_file
|
|
else
|
|
echo "IPADDR$num_v4num=${str_v4ip}" >> $str_conf_file
|
|
echo "NETMASK$num_v4num=${str_v4mask}" >> $str_conf_file
|
|
fi
|
|
else
|
|
#If using network service, the NIC alias device format is <NIC>:<num_v4num> like eth0:1
|
|
if [ $num_v4num -ne 0 ]; then
|
|
str_if_name=${str_if_name}:${num_v4num}
|
|
fi
|
|
str_conf_file="/etc/sysconfig/network-scripts/ifcfg-${str_if_name}"
|
|
echo "DEVICE=${str_if_name}" > $str_conf_file
|
|
echo "BOOTPROTO=none" >> $str_conf_file
|
|
echo "NM_CONTROLLED=no" >> $str_conf_file
|
|
echo "IPADDR=${str_v4ip}" >> $str_conf_file
|
|
echo "NETMASK=${str_v4mask}" >> $str_conf_file
|
|
echo "ONBOOT=yes" >> $str_conf_file
|
|
fi
|
|
if [ "$str_nic_mtu" != "$str_default_token" ]; then
|
|
if [ $networkmanager_active -eq 1 ]; then
|
|
nmcli con modify $con_name mtu $str_nic_mtu
|
|
else
|
|
echo "MTU=${str_nic_mtu}" >> $str_conf_file
|
|
fi
|
|
fi
|
|
if [[ ${str_if_name} == [a-zA-Z0-9]*.[0-9]* ]]; then
|
|
echo "VLAN=yes" >> $str_conf_file
|
|
fi
|
|
#add extra params
|
|
i=0
|
|
while [ $i -lt ${#array_extra_param_names[@]} ]
|
|
do
|
|
name="${array_extra_param_names[$i]}"
|
|
value="${array_extra_param_values[$i]}"
|
|
if xcat_uses_nm_keyfile "$OSVER" "$con_name"; then
|
|
# Best-effort: apply as a native NetworkManager property if one exists.
|
|
# Arbitrary ifcfg-style keys (e.g. CONNECTED_MODE) have no NM setting and
|
|
# are (re)persisted into the keyfile [user] section after ALL IPs are
|
|
# configured (post-loop block below), because the per-IP nmcli modify used
|
|
# for additional addresses re-serializes the keyfile and would otherwise
|
|
# drop anything appended here.
|
|
nmcli con modify $con_name $name $value 2>/dev/null || true
|
|
else
|
|
grep -i "${name}" $str_conf_file
|
|
if [ $? -eq 0 ];then
|
|
sed -i "s/.*${name}.*/${name}=${value}/i" $str_conf_file
|
|
else
|
|
echo "${name}=${value}" >> $str_conf_file
|
|
fi
|
|
fi
|
|
i=$((i+1))
|
|
done
|
|
fi
|
|
}
|
|
|
|
configipv6(){
|
|
str_if_name=$1
|
|
str_v6ip=$2
|
|
str_v6net=$3
|
|
str_v6prefix=$4
|
|
num_v6num=$5
|
|
num_v4num=$6
|
|
str_v6gateway=$7
|
|
str_extra_params=$8
|
|
|
|
#parse the extra parameters
|
|
if [ "$str_extra_params" != "$str_default_token" ]; then
|
|
parse_nic_extra_params "$str_extra_params"
|
|
fi
|
|
|
|
#remove the prefix length from the subnet
|
|
str_v6net=`echo $str_v6net | cut -d"/" -f 1`
|
|
|
|
#remove the "/" from mask
|
|
str_v6prefix=`echo $str_v6prefix | sed 's/\///'`
|
|
|
|
if [ "$str_os_type" = "sles" ];then
|
|
str_conf_file="/etc/sysconfig/network/ifcfg-${str_if_name}"
|
|
if [ $num_v4num -eq 0 -a $num_v6num -eq 0 ];then
|
|
echo "DEVICE=$str_if_name" > $str_conf_file
|
|
echo "BOOTPROTO=static" >> $str_conf_file
|
|
echo "NM_CONTROLLED=no" >> $str_conf_file
|
|
echo "STARTMODE=onboot" >> $str_conf_file
|
|
fi
|
|
echo "LABEL_ipv6${num_v6num}=ipv6$num_v6num" >> $str_conf_file
|
|
echo "IPADDR_ipv6${num_v6num}=${str_v6ip}" >> $str_conf_file
|
|
echo "PREFIXLEN_ipv6${num_v6num}=${str_v6prefix}" >> $str_conf_file
|
|
if [ "$str_v6gateway" != "$str_default_token" ] -a [ `echo $str_v6gateway | grep -v 'xcatmaster'` ];then
|
|
grep -E "default[:space:]+${str_v6gateway}[:space:]+" /etc/sysconfig/network/routes 2>&1 1>/dev/null
|
|
if [ $? -ne 0 ];then
|
|
echo "default $str_v6gateway - -" >> /etc/sysconfig/network/routes
|
|
fi
|
|
fi
|
|
|
|
#add extra params
|
|
i=0
|
|
while [ $i -lt ${#array_extra_param_names[@]} ]
|
|
do
|
|
name="${array_extra_param_names[$i]}"
|
|
value="${array_extra_param_values[$i]}"
|
|
echo " $i: name=$name value=$value"
|
|
grep -i "${name}" $str_conf_file
|
|
if [ $? -eq 0 ];then
|
|
sed -i "s/.*${name}.*/${name}=${value}/i" $str_conf_file
|
|
else
|
|
echo "${name}=${value}" >> $str_conf_file
|
|
fi
|
|
i=$((i+1))
|
|
done
|
|
#ubuntu/debian rendered by netplan (18.04+) -- see configipv4 (issue #7454)
|
|
elif [ "$str_os_type" = "debian" ] && [ "$netplan_active" = "1" ];then
|
|
if [ $num_v4num -eq 0 -a $num_v6num -eq 0 ];then
|
|
netplan_reset_nic "${str_if_name}"
|
|
fi
|
|
#configipv6 takes no mtu argument: $str_nic_mtu here would be whatever configipv4 last
|
|
#assigned for this NIC, and the ifupdown v6 branch below writes no mtu at all
|
|
write_netplan_addr "${str_if_name}" "${str_v6ip}/${str_v6prefix}" ""
|
|
if [ "$str_v6gateway" != "$str_default_token" ] && [ -n "$str_v6gateway" ] \
|
|
&& echo "$str_v6gateway" | grep -qv 'xcatmaster'; then
|
|
write_netplan_route "${str_if_name}" "default" "${str_v6gateway}"
|
|
fi
|
|
#the ifupdown v6 branch below writes these into the stanza; dropping them here would
|
|
#silently discard configuration on a v6-only NIC
|
|
i=0
|
|
while [ $i -lt ${#array_extra_param_names[@]} ]
|
|
do
|
|
write_netplan_param "${str_if_name}" "${array_extra_param_names[$i]}" "${array_extra_param_values[$i]}"
|
|
i=$((i+1))
|
|
done
|
|
elif [ "$str_os_type" = "debian" ];then
|
|
#debian or ubuntu
|
|
str_conf_file="/etc/network/interfaces.d/${str_if_name}"
|
|
if [ $num_v4num -eq 0 -a $num_v6num -eq 0 ];then
|
|
echo "auto ${str_if_name}" > $str_conf_file
|
|
fi
|
|
if [ $num_v6num -eq 0 ];then
|
|
echo "pre-up modprobe ipv6" >> $str_conf_file
|
|
echo "iface ${str_if_name} inet6 static" >> $str_conf_file
|
|
echo " address ${str_v6ip}" >> $str_conf_file
|
|
echo " netmask ${str_v6prefix}" >> $str_conf_file
|
|
if [ "$str_v6gateway" != "$str_default_token" ]; then
|
|
echo " gateway ${str_v6gateway}" >> $str_conf_file
|
|
fi
|
|
|
|
#add extra params
|
|
i=0
|
|
while [ $i -lt ${#array_extra_param_names[@]} ]
|
|
do
|
|
name="${array_extra_param_names[$i]}"
|
|
value="${array_extra_param_values[$i]}"
|
|
echo " $i: name=$name value=$value"
|
|
grep -i "${name}" $str_conf_file
|
|
if [ $? -eq 0 ];then
|
|
sed -i "s/.*${name}.*/${name} ${value}/i" $str_conf_file
|
|
else
|
|
echo "${name} ${value}" >> $str_conf_file
|
|
fi
|
|
i=$((i+1))
|
|
done
|
|
else
|
|
echo " post-up /sbin/ifconfig ${str_if_name} inet6 add ${str_v6ip}/${str_v6prefix}" >> $str_conf_file
|
|
echo " pre-down /sbin/ifconfig ${str_if_name} inet6 del ${str_v6ip}/${str_v6prefix}" >> $str_conf_file
|
|
fi
|
|
else
|
|
#redhat
|
|
con_name="xcat-"${str_if_name}
|
|
if [ $networkmanager_active -eq 1 ]; then
|
|
if [ $num_v4num -eq 0 -a $num_v6num -eq 0 ];then
|
|
is_nmcli_connection_exist $con_name
|
|
if [ $? -eq 0 ]; then
|
|
tmp_con_name=$con_name"-tmp"
|
|
nmcli con modify $con_name connection.id $tmp_con_name
|
|
fi
|
|
nmcli con add type ethernet con-name $con_name ifname ${str_if_name} ipv6.method manual ipv6.addresses ${str_v6ip}/${str_v6prefix} connection.autoconnect-priority 9
|
|
fi
|
|
if [ $num_v6num -eq 0 ];then
|
|
nmcli con modify $con_name ipv6.method manual ipv6.addresses ${str_v6ip}/${str_v6prefix}
|
|
else
|
|
nmcli con modify $con_name ipv6.method manual +ipv6.addresses ${str_v6ip}/${str_v6prefix}
|
|
fi
|
|
if [[ "$str_v6gateway" != "$str_default_token" && ! "$str_v6gateway" =~ xcatmaster ]];then
|
|
nmcli con modify $con_name ipv6.gateway $str_v6gateway
|
|
fi
|
|
# TODO add networkmanager_active -eq 2 case
|
|
else
|
|
str_conf_file="/etc/sysconfig/network-scripts/ifcfg-xcat-${str_if_name}"
|
|
str_conf_file_1="/etc/sysconfig/network-scripts/ifcfg-xcat-${str_if_name}-1"
|
|
if [ -f $str_conf_file_1 ]; then
|
|
grep -x "NAME=$con_name" $str_conf_file_1 >/dev/null 2>/dev/null
|
|
if [ $? -eq 0 ]; then
|
|
str_conf_file=$str_conf_file_1
|
|
fi
|
|
fi
|
|
if [ $num_v4num -eq 0 -a $num_v6num -eq 0 ];then
|
|
echo "DEVICE=$str_if_name" > $str_conf_file
|
|
echo "BOOTPROTO=static" >> $str_conf_file
|
|
echo "NM_CONTROLLED=no" >> $str_conf_file
|
|
echo "ONBOOT=yes" >> $str_conf_file
|
|
fi
|
|
if [ $num_v6num -eq 0 ];then
|
|
echo "IPV6INIT=yes" >> $str_conf_file
|
|
echo "IPV6ADDR=${str_v6ip}/${str_v6prefix}" >> $str_conf_file
|
|
else
|
|
echo "IPV6ADDR_SECONDARIES=${str_v6ip}/${str_v6prefix}" >> $str_conf_file
|
|
fi
|
|
if [[ "$str_v6gateway" != "$str_default_token" && ! "$str_v6gateway" =~ xcatmaster ]];then
|
|
echo "IPV6_DEFAULTGW=$str_v6gateway" >> $str_conf_file
|
|
fi
|
|
fi
|
|
#add extra params
|
|
i=0
|
|
while [ $i -lt ${#array_extra_param_names[@]} ]
|
|
do
|
|
name="${array_extra_param_names[$i]}"
|
|
value="${array_extra_param_values[$i]}"
|
|
echo " $i: name=$name value=$value"
|
|
grep -i "${name}" $str_conf_file
|
|
if [ $? -eq 0 ];then
|
|
sed -i "s/.*${name}.*/${name}=${value}/i" $str_conf_file
|
|
else
|
|
echo "${name}=${value}" >> $str_conf_file
|
|
fi
|
|
i=$((i+1))
|
|
done
|
|
fi
|
|
}
|
|
|
|
#delete all configuration file(s) on linux
|
|
function delete_nic_config_files(){
|
|
str_temp_name=$1
|
|
#delete the configuration files
|
|
#delete the configuration history
|
|
if [ "$str_os_type" = "debian" ] && [ "$netplan_active" = "1" ];then
|
|
rm -f "$(netplan_file "$str_temp_name")" 2>/dev/null
|
|
sed -i "/${str_temp_name}/d" "${str_cfg_dir}xcat_history_important" 2>/dev/null
|
|
elif [ "$str_os_type" = "debian" ];then
|
|
rm -f /etc/network/interfaces.d/$str_temp_name 2>/dev/null
|
|
sed -i "/${str_temp_name}/d" /etc/network/xcat_history_important
|
|
elif [ "$str_os_type" = "sles" ];then
|
|
rm -f /etc/sysconfig/network/ifcfg-${str_temp_name} 2>/dev/null
|
|
sed -i "/${str_temp_name}/d" /etc/sysconfig/network/xcat_history_important
|
|
else
|
|
rm -f /etc/sysconfig/network-scripts/ifcfg-${str_temp_name} 2>/dev/null
|
|
rm -f /etc/sysconfig/network-scripts/ifcfg-${str_temp_name}:* 2>/dev/null
|
|
sed -i "/${str_temp_name}/d" /etc/sysconfig/network-scripts/xcat_history_important
|
|
fi
|
|
}
|
|
|
|
function add_ip_temporary(){
|
|
local str_ip_prefix=$1
|
|
local str_temp_name=$2
|
|
local str_ip=`echo $str_ip_prefix | awk -F'_' '{print $1}'`
|
|
local str_mask=`echo $str_ip_prefix | awk -F'_' '{print $2}'`
|
|
|
|
if [ "$str_os_type" = "aix" ];then
|
|
echo $str_ip | grep ":" > /dev/null
|
|
#ipv6
|
|
if [ $? -eq 0 ];then
|
|
lsattr -El $str_temp_name | grep netaddr6 | awk '{print $2}' | grep ":"
|
|
if [ $? -ne 0 ];then
|
|
chdev -l $str_temp_name -a netaddr6=$str_ip -a prefixlen=$str_mask
|
|
else
|
|
chdev -l $str_temp_name -a alias6=${str_ip}/${str_mask}
|
|
fi
|
|
#ipv4
|
|
else
|
|
lsattr -El $str_temp_name | grep netaddr | awk '{print $2}' | grep '\.'
|
|
if [ $? -ne 0 ];then
|
|
chdev -l $str_temp_name -a netaddr=${str_ip} -a netmask=${str_mask}
|
|
else
|
|
chdev -l $str_temp_name -a alias4=${str_ip},${str_mask}
|
|
fi
|
|
fi
|
|
else
|
|
echo $str_ip | grep ":" > /dev/null
|
|
#ipv6
|
|
if [ $? = 0 ];then
|
|
lsmod |grep -w 'ipv6'
|
|
if [ $? -ne 0 ];then
|
|
modprobe ipv6
|
|
fi
|
|
ip addr add ${str_ip}/${str_mask} dev $str_temp_name
|
|
#ipv4
|
|
else
|
|
str_label=''
|
|
ip addr show dev $str_temp_name | grep inet | grep "global" | grep -v ':' | grep "${str_temp_name}"
|
|
if [ $? -eq 0 ] && [ $networkmanager_active -eq 0 ]; then
|
|
for num_i in {1..1000}
|
|
do
|
|
ip addr show dev $str_temp_name | grep inet | grep "global" | grep ":${num_i}"
|
|
if [ $? -ne 0 ];then
|
|
str_label=${str_nic_name}:${num_i}
|
|
break
|
|
fi
|
|
done
|
|
else
|
|
str_label=$str_nic_name
|
|
fi
|
|
|
|
str_bcase=$(v4calcbcase $str_ip $str_mask)
|
|
#the label is ready, add the ip address directly
|
|
ip addr add $str_ip/${str_mask} broadcast $str_bcase dev $str_nic_name scope global label $str_label
|
|
if [ $? -ne 0 ]; then
|
|
log_error "add the ip address $str_ip/${str_mask} failed."
|
|
error_code=1
|
|
fi
|
|
fi
|
|
fi
|
|
}
|
|
|
|
|
|
|
|
# This token is used for the value of an attributes that has not been assigned any value.
|
|
str_default_token="default"
|
|
|
|
|
|
str_nic_name=''
|
|
str_os_type=`uname | tr 'A-Z' 'a-z'`
|
|
str_cfg_dir=''
|
|
str_temp=''
|
|
if [ "$str_os_type" = "linux" ];then
|
|
str_temp=`echo $OSVER | grep -E '(sles|suse)'`
|
|
if [ -f "/etc/debian_version" ];then
|
|
debianpreconf
|
|
str_os_type="debian"
|
|
str_cfg_dir="/etc/network/"
|
|
elif [ -f "/etc/SuSE-release" -o -n "$str_temp" ];then
|
|
str_os_type="sles"
|
|
str_cfg_dir="/etc/sysconfig/network/"
|
|
elif [ -f /etc/os-release ] && cat /etc/os-release |grep NAME|grep -i SLE >/dev/null; then
|
|
str_os_type="sles"
|
|
str_cfg_dir="/etc/sysconfig/network"
|
|
else
|
|
str_os_type="redhat"
|
|
str_cfg_dir="/etc/sysconfig/network-scripts/"
|
|
fi
|
|
else
|
|
echo "configeth dose not support AIX in this build"
|
|
exit 1
|
|
|
|
fi
|
|
|
|
|
|
log_info "configeth on $NODE: os type: $str_os_type"
|
|
if [ "$1" = "-r" ];then
|
|
if [ $# -ne 2 ];then
|
|
log_error "configeth on $NODE: remove nic, but the nic name is missed"
|
|
exit 1
|
|
fi
|
|
str_nic_name=$2
|
|
log_info "configeth on $NODE: remove nic $str_nic_name"
|
|
|
|
if [ "$str_os_type" = "aix" ];then
|
|
old_ifs=$IFS
|
|
IFS=$'\n'
|
|
str_temp=`lsattr -El $str_nic_name | grep alias4 | awk '{print $2}'`
|
|
array_alias4_temp=($str_temp)
|
|
IFS=$old_ifs
|
|
for str_ip_alias4 in $str_temp
|
|
do
|
|
#the alias format should be ipaddr,netmask
|
|
echo $str_ip_alias4 | grep -E ,
|
|
if [ $? -eq 0 ];then
|
|
chdev -l $str_nic_name -a delalias4=$str_ip_alias4
|
|
fi
|
|
done
|
|
str_temp=`lsattr -El $str_nic_name | grep alias6 | awk '{print $2}'`
|
|
old_ifs=$IFS
|
|
IFS=$'\n'
|
|
array_alias6_temp=($str_temp)
|
|
IFS=$old_ifs
|
|
for str_ip_alias6 in ${array_alias6_temp[@]}
|
|
do
|
|
echo $str_ip_alias6 | grep -E /
|
|
if [ $? -eq 0 ];then
|
|
chdev -l $str_nic_name -a delalias6=$str_ip_alias6
|
|
fi
|
|
done
|
|
log_info "configeth on $NODE run command: chdev -l $str_nic_name -a netaddr='' -a netmask='' -a netaddr6='' -a prefixlen='' -a state=down"
|
|
chdev -l $str_nic_name -a netaddr='' -a netmask='' -a netaddr6='' -a prefixlen='' -a state=down
|
|
else
|
|
#shut down the nic if it is on
|
|
ip link show $str_nic_name | grep -i ',up'
|
|
if [ $? -eq 0 ];then
|
|
if [ "$str_os_type" = "debian" ] && [ "$netplan_active" = "1" ];then
|
|
#ifdown belongs to ifupdown and does not exist on a netplan-rendered node
|
|
ip link set dev $str_nic_name down
|
|
elif [ "$str_os_type" = "debian" ];then
|
|
ifdown --force $str_nic_name
|
|
else
|
|
ip link set dev $str_nic_name down
|
|
fi
|
|
fi
|
|
|
|
#delete the configuration files
|
|
delete_nic_config_files $str_nic_name
|
|
#the drop-in just removed WAS the live configuration; without applying, the address
|
|
#stays on the link until the next reboot
|
|
if [ "$str_os_type" = "debian" ] && [ "$netplan_active" = "1" ];then
|
|
netplan_apply
|
|
if [ $? -ne 0 ]; then
|
|
error_code=1
|
|
fi
|
|
fi
|
|
fi
|
|
exit $error_code
|
|
elif [ "$1" = "-s" ];then
|
|
if [ $# -lt 2 ];then
|
|
log_error "configeth on $NODE: config install nic, but the nic name is missed"
|
|
exit 1
|
|
fi
|
|
str_inst_nic=$2
|
|
str_inst_ip=''
|
|
str_inst_mask=''
|
|
str_inst_gateway=''
|
|
str_inst_mtu=''
|
|
str_inst_dns=''
|
|
if [ "$str_os_type" = "aix" ];then
|
|
log_error "configeth on $NODE: aix does not support -s flag"
|
|
exit 1
|
|
elif [ -f "/etc/debian_version" ];then
|
|
str_lease_file="/var/lib/dhcp/dhclient."$str_inst_nic".leases"
|
|
if [ -e "$str_lease_file" ];then
|
|
str_inst_ip=`grep fixed-address $str_lease_file | tail -n 1 | awk '{print $2}' | sed 's/;$//'`
|
|
str_inst_mask=`grep subnet-mask $str_lease_file | tail -n 1 | awk '{print $3}' | sed 's/;$//'`
|
|
str_inst_gateway=`grep routers $str_lease_file | tail -n 1 | awk '{print $3}' | sed 's/;$//'`
|
|
else
|
|
if [ -n "$MACADDRESS" ];then
|
|
str_inst_mac=$MACADDRESS
|
|
inst_nic=`ip -o link |grep -i ${str_inst_mac} |awk '{print $2}'|sed 's/://g'`
|
|
if [ ! -z "${inst_nic}" ];then
|
|
str_inst_ip=`ip -4 -o addr|grep -i ${inst_nic} |awk '{print $4}'|awk -F/ '{print $1}'`
|
|
if [ ! -z "$str_inst_ip" ];then
|
|
inst_prefix=`ip ro ls|grep -i ${str_inst_ip}|awk '{print $1}'|awk -F/ '{print $2}'`
|
|
if [ ! -z "$inst_prefix" ];then
|
|
str_inst_mask=`v4prefix2mask $inst_prefix`
|
|
fi
|
|
fi
|
|
fi
|
|
str_inst_gateway=`ip ro ls|grep default|awk '{print $3}'|head -1`
|
|
fi
|
|
fi
|
|
elif [ "$str_os_type" = "sles" ];then
|
|
str_lease_file="/var/lib/dhcpcd/dhcpcd-"$str_inst_nic".info"
|
|
if [ -e "$str_lease_file" ];then
|
|
str_inst_ip=`grep IPADDR $str_lease_file | tail -n 1 | awk -F'=' '{print $2}' | sed "s/'//g"`
|
|
str_inst_mask=`grep NETMASK $str_lease_file | tail -n 1 | awk -F'=' '{print $2}' | sed "s/'//g"`
|
|
str_inst_gateway=`grep GATEWAYS $str_lease_file | tail -n 1 | awk -F'=' '{print $2}' | sed "s/'//g"`
|
|
else
|
|
if [ -n "$MACADDRESS" ];then
|
|
str_inst_mac=$MACADDRESS
|
|
inst_nic=`ip -o link |grep -i ${str_inst_mac} |awk '{print $2}'|sed 's/://g'`
|
|
if [ ! -z "${inst_nic}" ];then
|
|
str_inst_ip=`ip -4 -o addr|grep -i ${inst_nic} |awk '{print $4}'|awk -F/ '{print $1}'`
|
|
if [ ! -z "$str_inst_ip" ];then
|
|
inst_prefix=`ip ro ls|grep -i ${str_inst_ip}|awk '{print $1}'|awk -F/ '{print $2}'`
|
|
if [ ! -z "$inst_prefix" ];then
|
|
str_inst_mask=`v4prefix2mask $inst_prefix`
|
|
fi
|
|
fi
|
|
fi
|
|
str_inst_gateway=`ip ro ls|grep default|awk '{print $3}'|head -1`
|
|
echo "str_inst_gateway is $str_inst_gateway"
|
|
fi
|
|
fi
|
|
else
|
|
str_lease_file=`ls /var/lib/dhclient/*$str_inst_nic* | grep lease`
|
|
if [ -e "$str_lease_file" ];then
|
|
str_inst_ip=`grep fixed-address $str_lease_file | tail -n 1 | awk '{print $2}' | sed 's/;$//'`
|
|
str_inst_mask=`grep subnet-mask $str_lease_file | tail -n 1 | awk '{print $3}' | sed 's/;$//'`
|
|
str_inst_gateway=`grep routers $str_lease_file | tail -n 1 | awk '{print $3}' | sed 's/;$//'`
|
|
str_inst_dns=`grep domain-name-servers $str_lease_file | tail -n 1 | awk '{print $3}' | sed 's/;$//'`
|
|
str_inst_dns_search=`grep domain-search $str_lease_file | tail -n 1 | awk '{print $3}' | sed 's/;$//'`
|
|
else
|
|
if [ -n "$MACADDRESS" ];then
|
|
str_inst_mac=$MACADDRESS
|
|
inst_nic=`ip -o link |grep -i ${str_inst_mac} |awk '{print $2}'|sed 's/://g'`
|
|
if [ ! -z "${inst_nic}" ];then
|
|
str_inst_ip=`ip -4 -o addr|grep -i ${inst_nic} |awk '{print $4}'|awk -F/ '{print $1}'`
|
|
if [ ! -z "$str_inst_ip" ];then
|
|
inst_prefix=`ip ro ls|grep -i ${str_inst_ip}|awk '{print $1}'|awk -F/ '{print $2}'`
|
|
if [ ! -z "$inst_prefix" ];then
|
|
str_inst_mask=`v4prefix2mask $inst_prefix`
|
|
fi
|
|
fi
|
|
fi
|
|
str_inst_gateway=`ip ro ls|grep default|awk '{print $3}'|head -1`
|
|
str_resolv_file=/var/run/NetworkManager/resolv.conf
|
|
if [ -f $str_resolv_file ];then
|
|
str_inst_dns=`grep ^nameserver $str_resolv_file | sed 's/^nameserver //g' | sed ':a;N;$!ba;s/\n/,/g'`
|
|
str_inst_dns_search=`grep ^search $str_resolv_file | sed 's/^search //g'`
|
|
fi
|
|
fi
|
|
fi
|
|
fi
|
|
if [ -n "$IPADDR" ];then
|
|
str_inst_ip=$IPADDR
|
|
fi
|
|
|
|
if [ -n "$MACADDRESS" ];then
|
|
str_inst_mac=$MACADDRESS
|
|
else
|
|
#str_inst_mac=`ifconfig $str_inst_nic | grep HWaddr | awk -F'HWaddr' '{print $2}' | sed 's/\s*//'`
|
|
str_inst_mac=`ip link show $netdev | grep ether | awk '{print $2}'`
|
|
fi
|
|
if [ -z "$str_inst_ip" -o -z "$str_inst_mask" ];then
|
|
log_info "configeth on $NODE: config install nic, can not find information from dhcp lease file, return."
|
|
exit 1
|
|
fi
|
|
str_inst_net=$(v4calcnet $str_inst_ip $str_inst_mask)
|
|
num_index=1
|
|
while [ $num_index -le $NETWORKS_LINES ];do
|
|
eval str_tmp=\$NETWORKS_LINE$num_index
|
|
str_tmp_name=`echo $str_tmp | awk -F'net=' '{print $2}' | awk -F'|' '{print $1}'`
|
|
if [ "$str_tmp_name" = "$str_inst_net" ];then
|
|
str_inst_mtu=`echo $str_tmp | awk -F'mtu=' '{print $2}' | awk -F'|' '{print $1}'`
|
|
break
|
|
fi
|
|
num_index=$((num_index+1))
|
|
done
|
|
|
|
|
|
#get extra configration parameters for each nic
|
|
#echo "str_inst_nic=$str_inst_nic, str_inst_ip=$str_inst_ip"
|
|
get_nic_extra_params $str_inst_nic "$NICEXTRAPARAMS"
|
|
if [ ${#array_nic_params[@]} -gt 0 ]; then
|
|
str_extra_params=${array_nic_params[0]}
|
|
parse_nic_extra_params "$str_extra_params"
|
|
fi
|
|
|
|
# cofniguring the interface
|
|
|
|
#ubuntu/debian rendered by netplan (18.04+): interfaces.d is ignored, so the install NIC
|
|
#has to be written as a netplan drop-in too -- this is the path confignetwork takes for
|
|
#every provisioned node, and leaving it on interfaces.d configured nothing (issue #7454)
|
|
if [ -f "/etc/debian_version" ] && [ "$netplan_active" = "1" ];then
|
|
netplan_reset_nic "${str_inst_nic}"
|
|
str_inst_prefix=$(v4mask2prefix ${str_inst_mask})
|
|
write_netplan_addr "${str_inst_nic}" "${str_inst_ip}/${str_inst_prefix}" "${str_inst_mtu}"
|
|
if [ -n "$str_inst_gateway" ];then
|
|
write_netplan_route "${str_inst_nic}" "default" "${str_inst_gateway}"
|
|
fi
|
|
i=0
|
|
while [ $i -lt ${#array_extra_param_names[@]} ]
|
|
do
|
|
write_netplan_param "${str_inst_nic}" "${array_extra_param_names[$i]}" "${array_extra_param_values[$i]}"
|
|
i=$((i+1))
|
|
done
|
|
hostname $NODE
|
|
echo $NODE > /etc/hostname
|
|
elif [ -f "/etc/debian_version" ];then
|
|
str_conf_file="/etc/network/interfaces.d/${str_inst_nic}"
|
|
echo "auto ${str_inst_nic}" > $str_conf_file
|
|
echo "iface ${str_inst_nic} inet static" >> $str_conf_file
|
|
echo " address ${str_inst_ip}" >> $str_conf_file
|
|
echo " netmask ${str_inst_mask}" >> $str_conf_file
|
|
echo " hwaddress ether ${str_inst_mac}" >> $str_conf_file
|
|
if [ -n "${str_inst_mtu}" ];then
|
|
echo " mtu ${str_inst_mtu}" >> $str_conf_file
|
|
fi
|
|
if [ -n "$str_inst_gateway" ];then
|
|
echo " gateway $str_inst_gateway" >> $str_conf_file
|
|
fi
|
|
#add extra params
|
|
i=0
|
|
while [ $i -lt ${#array_extra_param_names[@]} ]
|
|
do
|
|
name="${array_extra_param_names[$i]}"
|
|
value="${array_extra_param_values[$i]}"
|
|
echo " $i: name=$name value=$value"
|
|
grep -i "${name}" $str_conf_file
|
|
if [ $? -eq 0 ];then
|
|
sed -i "s/.*${name}.*/${name} ${value}/i" $str_conf_file
|
|
else
|
|
echo "${name} ${value}" >> $str_conf_file
|
|
fi
|
|
i=$((i+1))
|
|
done
|
|
hostname $NODE
|
|
echo $NODE > /etc/hostname
|
|
elif [ "$str_os_type" = "sles" ];then
|
|
str_conf_file="/etc/sysconfig/network/ifcfg-${str_inst_nic}"
|
|
echo "DEVICE=${str_inst_nic}" > $str_conf_file
|
|
echo "BOOTPROTO=static" >> $str_conf_file
|
|
echo "IPADDR=${str_inst_ip}" >> $str_conf_file
|
|
echo "NETMASK=${str_inst_mask}" >> $str_conf_file
|
|
echo "HWADDR=${str_inst_mac}" >> $str_conf_file
|
|
if [ -n "${str_inst_mtu}" ];then
|
|
echo "MTU=${str_inst_mtu}" >> $str_conf_file
|
|
fi
|
|
echo "STARTMODE=onboot" >> $str_conf_file
|
|
if [ -n "$str_inst_gateway" ];then
|
|
grep -i "default" /etc/sysconfig/network/routes
|
|
if [ $? -eq 0 ];then
|
|
sed -i "s/.*default.*/default ${str_inst_gateway} - -/i" /etc/sysconfig/network/routes
|
|
else
|
|
echo "default ${str_inst_gateway} - -" >> /etc/sysconfig/network/routes
|
|
fi
|
|
fi
|
|
|
|
#add extra params
|
|
i=0
|
|
while [ $i -lt ${#array_extra_param_names[@]} ]
|
|
do
|
|
name="${array_extra_param_names[$i]}"
|
|
value="${array_extra_param_values[$i]}"
|
|
echo " $i: name=$name value=$value"
|
|
grep -i "${name}" $str_conf_file
|
|
if [ $? -eq 0 ];then
|
|
sed -i "s/.*${name}.*/${name}=${value}/i" $str_conf_file
|
|
else
|
|
echo "${name}=${value}" >> $str_conf_file
|
|
fi
|
|
i=$((i+1))
|
|
done
|
|
hostname $NODE
|
|
echo $NODE > /etc/HOSTNAME
|
|
else
|
|
# Extract the first numeric part of the VERSION_ID, ignoring any non-numeric characters.
|
|
os_major_version=`cat /etc/os* | grep VERSION_ID | cut -d '=' -f2 | sed s/\"//g | cut -d "." -f1`
|
|
|
|
if [[ -z "${os_major_version}" ]] ; then
|
|
logger -t xcat -p local4.err "configeth: Could not determine the OS version, defaulting to the RHEL 7 behavior"
|
|
log_warn "configeth on $NODE: Could not determine the OS version, defaulting to the RHEL 7 behavior"
|
|
os_major_version=7
|
|
fi
|
|
|
|
#write ifcfg-* file for redhat
|
|
con_name="xcat-"${str_inst_nic}
|
|
str_inst_prefix=$(v4mask2prefix ${str_inst_mask})
|
|
str_conf_file="/etc/sysconfig/network-scripts/ifcfg-${str_inst_nic}"
|
|
if [ $networkmanager_active -eq 2 ]; then
|
|
str_conf_file="/etc/sysconfig/network-scripts/ifcfg-$con_name"
|
|
fi
|
|
if [ $networkmanager_active -eq 1 ]; then
|
|
is_nmcli_connection_exist "$con_name"
|
|
if [ $? -eq 0 ]; then
|
|
tmp_con_name=${str_inst_nic}"-tmp"
|
|
nmcli con modify $con_name connection.id $tmp_con_name
|
|
fi
|
|
if [ -z "$str_inst_gateway" ]; then
|
|
# EL10/NM: during updatenode the dhclient lease and MACADDRESS may be
|
|
# absent, leaving the gateway empty. Recover it from the live default
|
|
# route so the install NIC keeps its default route.
|
|
str_inst_gateway=`ip route show default | awk '{print $3}' | head -1`
|
|
fi
|
|
gw4_arg=""
|
|
# Never pass an empty gw4: nmcli rejects "value for 'gw4' is missing", the
|
|
# connection is not created, and the later down+reload leaves the NIC down.
|
|
[ -n "$str_inst_gateway" ] && gw4_arg="gw4 $str_inst_gateway"
|
|
nmcli con add type ethernet con-name $con_name ifname ${str_inst_nic} ipv4.method manual ipv4.addresses ${str_inst_ip}/${str_inst_prefix} connection.autoconnect-priority 9 $gw4_arg
|
|
str_conf_file_1="/etc/sysconfig/network-scripts/ifcfg-xcat-${str_inst_nic}-1"
|
|
if [ -f $str_conf_file_1 ]; then
|
|
grep $con_name $str_conf_file_1 >/dev/null 2>/dev/null
|
|
if [ $? -eq 0 ]; then
|
|
$str_conf_file=$str_conf_file_1
|
|
#mv -f $str_conf_file_1 $str_conf_file
|
|
fi
|
|
fi
|
|
else
|
|
echo "DEVICE=${str_inst_nic}" > $str_conf_file
|
|
echo "IPADDR=${str_inst_ip}" >> $str_conf_file
|
|
echo "NETMASK=${str_inst_mask}" >> $str_conf_file
|
|
echo "BOOTPROTO=none" >> $str_conf_file
|
|
echo "ONBOOT=yes" >> $str_conf_file
|
|
echo "NAME=${con_name}" >> $str_conf_file
|
|
echo "HWADDR=${str_inst_mac}" >> $str_conf_file
|
|
|
|
# Add GATEWAY to $str_conf_file only if the OS version is above RHEL 7.x.
|
|
if (( $os_major_version > 7 )) ; then
|
|
echo "GATEWAY=${str_inst_gateway}" >> $str_conf_file
|
|
fi
|
|
fi
|
|
if [ $networkmanager_active -eq 2 ]; then
|
|
echo "AUTOCONNECT_PRIORITY=9" >> $str_conf_file
|
|
fi
|
|
if [ -n "${str_inst_dns}" ];then
|
|
if [ $networkmanager_active -eq 1 ]; then
|
|
nmcli con modify $con_name ipv4.dns ${str_inst_dns}
|
|
fi
|
|
fi
|
|
if [ -n "${str_inst_dns_search}" ];then
|
|
if [ $networkmanager_active -eq 1 ]; then
|
|
nmcli con modify $con_name ipv4.dns-search "${str_inst_dns_search}"
|
|
fi
|
|
fi
|
|
if [ -n "${str_inst_mtu}" ];then
|
|
if [ $networkmanager_active -eq 1 ]; then
|
|
nmcli con modify $con_name mtu ${str_inst_mtu}
|
|
else
|
|
echo "MTU=${str_inst_mtu}" >> $str_conf_file
|
|
fi
|
|
fi
|
|
|
|
# Add GATEWAY to the network file only if the OS version is RHEL 7.x or below.
|
|
if (( $os_major_version < 8 )) ; then
|
|
if [ -n "$str_inst_gateway" ];then
|
|
grep -i "GATEWAY" /etc/sysconfig/network
|
|
if [ $? -eq 0 ];then
|
|
sed -i "s/.*GATEWAY.*/GATEWAY=${str_inst_gateway}/i" /etc/sysconfig/network
|
|
else
|
|
echo "GATEWAY=${str_inst_gateway}" >> /etc/sysconfig/network
|
|
fi
|
|
fi
|
|
fi
|
|
#add extra params
|
|
i=0
|
|
while [ $i -lt ${#array_extra_param_names[@]} ]
|
|
do
|
|
name="${array_extra_param_names[$i]}"
|
|
value="${array_extra_param_values[$i]}"
|
|
if xcat_uses_nm_keyfile "$OSVER" "$con_name"; then
|
|
nmcli con modify $con_name $name $value
|
|
else
|
|
echo "$i: name=$name value=$value"
|
|
grep -i "${name}" $str_conf_file
|
|
if [ $? -eq 0 ];then
|
|
sed -i "s/.*${name}.*/${name}=${value}/i" $str_conf_file
|
|
else
|
|
echo "${name}=${value}" >> $str_conf_file
|
|
fi
|
|
fi
|
|
i=$((i+1))
|
|
done
|
|
|
|
hostname $NODE
|
|
if [ -f "/etc/hostname" ]; then
|
|
echo $NODE > /etc/hostname
|
|
else
|
|
grep -i "HOSTNAME" /etc/sysconfig/network
|
|
if [ $? -eq 0 ];then
|
|
sed -i "s/.*HOSTNAME.*/HOSTNAME=${NODE}/i" /etc/sysconfig/network
|
|
else
|
|
echo "HOSTNAME=${NODE}" >> /etc/sysconfig/network
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
if [ "$UPDATENODE" = "1" ] || [ "$NODESETSTATE" = "netboot" ] || [ "$NODESETSTATE" = "statelite" ] || grep "REBOOT=TRUE" /opt/xcat/xcatinfo >/dev/null 2>&1; then
|
|
if_state=0
|
|
if [ "$str_os_type" = "debian" ] && [ "$netplan_active" = "1" ];then
|
|
: # netplan apply below reconfigures the interface; no ifdown needed
|
|
elif [ "$str_os_type" = "debian" ];then
|
|
ifdown --force $str_inst_nic
|
|
else
|
|
ip link set dev $str_inst_nic down
|
|
fi
|
|
#tested before NetworkManager: on an NM-rendered netplan node this is the correct arm,
|
|
#and as an elif after it, it was dead code that fell through to an nmcli call with an
|
|
#unset connection name
|
|
if [ "$str_os_type" = "debian" ] && [ "$netplan_active" = "1" ]; then
|
|
netplan_apply "$str_inst_nic" || error_code=1
|
|
elif [ $networkmanager_active -eq 1 ]; then
|
|
nmcli con modify $con_name ipv4.dns "${NAMESERVERS}"
|
|
nmcli con reload
|
|
nmcli con up $con_name
|
|
else
|
|
ifup $str_inst_nic
|
|
fi
|
|
if [ $? -ne 0 ]; then
|
|
if_state=$(wait_for_ifstate $str_inst_nic UP 20 5)
|
|
fi
|
|
if [ $if_state -ne 0 ]; then
|
|
log_error "bring $str_inst_nic up failed."
|
|
error_code=1
|
|
fi
|
|
fi
|
|
if [ $networkmanager_active -eq 1 ] && [ -n "$tmp_con_name" ]; then
|
|
if [ $error_code -eq 1 ]; then
|
|
nmcli con modify $tmp_con_name connection.id $con_name
|
|
else
|
|
nmcli con delete $tmp_con_name
|
|
fi
|
|
fi
|
|
exit $error_code
|
|
fi
|
|
|
|
#main prcess
|
|
#1. get all ip,netmask,subnet,gateway for the nic
|
|
#2. get current configurations
|
|
#3. delete the undefined ips
|
|
#4. add the new defined ips
|
|
#5. no modification, return directly
|
|
#3. on linux modify the configuration files
|
|
if [ $# -ne 3 ];then
|
|
log_error "configeth on $NODE: paramters error currently is $@"
|
|
exit 1
|
|
fi
|
|
str_nic_name=$1
|
|
old_ifs=$IFS
|
|
IFS=$'|'
|
|
array_nic_ips=($2)
|
|
array_nic_networks=($3)
|
|
IFS=$old_ifs
|
|
|
|
if [ "$str_os_type" = "aix" ];then
|
|
str_temp=`lsattr -El $str_nic_name`
|
|
else
|
|
str_temp=`ip addr show dev $str_nic_name`
|
|
fi
|
|
|
|
logger -t $log_label -p local4.err "configeth: old configuration: $str_temp"
|
|
echo "configeth on $NODE: old configuration: $str_temp"
|
|
|
|
|
|
#parse the networks tables contains
|
|
declare -a array_ip_mask
|
|
declare -a array_ip_status
|
|
declare -a array_nic_network_config
|
|
declare -a array_nic_subnet
|
|
declare -a array_nic_netmask
|
|
declare -a array_nic_gateway
|
|
declare -a array_nic_mtu
|
|
|
|
#get extra configration parameters for each nic
|
|
get_nic_extra_params $str_nic_name "$NICEXTRAPARAMS"
|
|
j=0
|
|
while [ $j -lt ${#array_nic_params[@]} ]
|
|
do
|
|
token1="${array_nic_params[$j]}"
|
|
echo "array_nic_params $j=$token1"
|
|
j=$((j+1))
|
|
done
|
|
|
|
|
|
str_ip_mask_pair=''
|
|
num_index=1
|
|
while [ $num_index -le $NETWORKS_LINES ];do
|
|
eval str_temp=\$NETWORKS_LINE$num_index
|
|
str_temp_name=`echo $str_temp | awk -F'netname=' '{print $2}' | awk -F'|' '{print $1}'`
|
|
num_i=0
|
|
while [ $num_i -lt ${#array_nic_ips[*]} ]
|
|
do
|
|
if [ "$str_temp_name" = "${array_nic_networks[$num_i]}" ];then
|
|
array_nic_network_config[$num_i]=$str_temp
|
|
break
|
|
fi
|
|
num_i=$((num_i+1))
|
|
done
|
|
num_index=$((num_index+1))
|
|
done
|
|
|
|
log_info "configeth on $NODE: new configuration"
|
|
num_index=0
|
|
str_ipv6_gateway=''
|
|
while [ $num_index -lt ${#array_nic_ips[*]} ];do
|
|
#get the ip address and network name
|
|
str_ip=${array_nic_ips[$num_index]}
|
|
str_netname=${array_nic_networks[$num_index]}
|
|
if [ ! $str_netname ];then
|
|
log_error "configeth on $NODE: Network name is not defined on $str_nic_name for $str_ip."
|
|
error_code=1
|
|
num_index=$((num_index+1))
|
|
continue
|
|
fi
|
|
|
|
#find out the network definition
|
|
str_line=${array_nic_network_config[$num_index]}
|
|
if [ ! $str_line ];then
|
|
log_error "configeth on $NODE: Network object $str_netname is not defined."
|
|
error_code=1
|
|
num_index=$((num_index+1))
|
|
continue
|
|
fi
|
|
|
|
#fetch the subnet and netmask in networks definition
|
|
str_subnet=`echo $str_line | awk -F'net=' '{print $2}' | awk -F'|' '{print $1}'`
|
|
str_netmask=`echo $str_line | awk -F'mask=' '{print $2}' | awk -F'|' '{print $1}' | sed 's:^/::'`
|
|
str_gateway=`echo $str_line | awk -F'gateway=' '{print $2}' | awk -F'|' '{print $1}'`
|
|
str_mtu=`echo $str_line | awk -F'mtu=' '{print $2}' | awk -F'|' '{print $1}'`
|
|
|
|
if [ ! $str_subnet -o ! $str_netmask ];then
|
|
log_error "configeth on $NODE: subnet or netmask is not defined in network object $str_netname."
|
|
error_code=1
|
|
num_index=$((num_index+1))
|
|
continue
|
|
fi
|
|
|
|
array_nic_subnet[$num_index]=$str_subnet
|
|
array_nic_netmask[$num_index]=$str_netmask
|
|
array_nic_gateway[$num_index]=$str_gateway
|
|
array_nic_mtu[$num_index]=$str_mtu
|
|
echo "$str_gateway" | grep ':'
|
|
if [ $? -eq 0 ];then
|
|
str_ipv6_gateway=$str_gateway
|
|
fi
|
|
logger -t $log_label -p local4.info "configeth: $str_ip, $str_subnet, $str_netmask, $str_gateway"
|
|
echo " $str_ip, $str_subnet, $str_netmask, $str_gateway"
|
|
#on linux, call sub rutine to define ipv4 or ipv6 address for the persitent configuration
|
|
if [ `echo $str_ip | grep -E '^([0-9]{1,3}\.){3}[0-9]{1,3}$'` ];then
|
|
if [ "$str_os_type" = "aix" ];then
|
|
hashset hash_new_config "${str_ip}_${str_netmask}" "new"
|
|
str_ip_mask_pair=$str_ip_mask_pair"${str_ip}_${str_netmask} "
|
|
else
|
|
str_prefix=$(v4mask2prefix $str_netmask)
|
|
hashset hash_new_config "${str_ip}_${str_prefix}" "new"
|
|
str_ip_mask_pair=$str_ip_mask_pair"${str_ip}_${str_prefix} "
|
|
fi
|
|
elif [ `echo $str_ip | grep -E ":"` ];then
|
|
num_ipv6_index=$((num_ipv6_index+1))
|
|
hashset hash_new_config "${str_ip}_${str_netmask}" "new"
|
|
str_ip_mask_pair=$str_ip_mask_pair"${str_ip}_${str_netmask} "
|
|
else
|
|
log_error "configeth on $NODE: the ipaddress( $str_ip ) for $str_nic_name is invalid."
|
|
error_code=1
|
|
fi
|
|
num_index=$((num_index+1))
|
|
done
|
|
|
|
str_ip_mask_pair=`echo "$str_ip_mask_pair" | sed -e 's/ $//'`
|
|
|
|
str_old_conf=''
|
|
if [ "$str_os_type" = "aix" ];then
|
|
#check the netaddr
|
|
str_history=`lsattr -El $str_nic_name | grep netaddr | awk '{print $2}' | grep '\.'`
|
|
if [ $? -eq 0 ];then
|
|
str_temp=`lsattr -El $str_nic_name | grep netmask | awk '{print $2}'`
|
|
str_old_ip=${str_history}"_"${str_temp}
|
|
str_ip_status=$(hashget hash_new_config $str_old_ip)
|
|
if [ -n "$str_ip_status" ];then
|
|
hashset hash_new_config $str_old_ip "old"
|
|
else
|
|
chdev -l $str_nic_name -a netaddr='' -a netmask=''
|
|
log_error "configeth on $NODE: delete undefined ip address $str_old_ip"
|
|
error_code=1
|
|
fi
|
|
fi
|
|
|
|
#check the netaddr6
|
|
str_history=`lsattr -El $str_nic_name | grep netaddr6 | awk '{print $2}' | grep ':'`
|
|
if [ $? -eq 0 ];then
|
|
str_temp=`lsattr -El $str_nic_name | grep prefixlen | awk '{print $2}'`
|
|
str_old_ip=${str_history}"_"${str_temp}
|
|
str_ip_status=$(hashget hash_new_config $str_old_ip)
|
|
if [ -n "$str_ip_status" ];then
|
|
hashset hash_new_config $str_old_ip "old"
|
|
else
|
|
chdev -l $str_nic_name -a netaddr6='' -a prefixlen=''
|
|
log_error "configeth on $NODE: delete undefined ipv6 address $str_old_ip"
|
|
fi
|
|
fi
|
|
|
|
#check the ipv4 alias
|
|
str_history=`lsattr -El $str_nic_name | grep alias4 | awk '{print $2}' | grep '\.'`
|
|
if [ $? -eq 0 ];then
|
|
old_ifs=$IFS
|
|
IFS=$'\n'
|
|
array_alias4_temp=($str_history)
|
|
IFS=$old_ifs
|
|
for str_temp in ${array_alias4_temp[@]}
|
|
do
|
|
str_old_ip=`echo $str_temp | tr ',' '_'`
|
|
str_ip_staus=$(hashget hash_new_config $str_old_ip)
|
|
if [ -n "$str_ip_staus" ];then
|
|
hashset hash_new_config $str_old_ip "old"
|
|
else
|
|
chdev -l $str_nic_name -a delalias4=$str_temp
|
|
|
|
fi
|
|
done
|
|
fi
|
|
|
|
#check the ipv6 alias
|
|
str_history=`lsattr -El $str_nic_name | grep alias6 | awk '{print $2}' | grep '\.'`
|
|
if [ $? -eq 0 ];then
|
|
old_ifs=$IFS
|
|
IFS=$'\n'
|
|
array_alias6_temp=($str_history)
|
|
IFS=$old_ifs
|
|
for str_temp in ${array_alias6_temp[@]}
|
|
do
|
|
str_old_ip=`$str_temp | tr '/' '_'`
|
|
str_ip_staus=$(hashget hash_new_config $str_old_ip)
|
|
if [ -n "$str_ip_staus" ];then
|
|
hashset hash_new_config $str_old_ip "old"
|
|
else
|
|
chdev -l $str_nic_name -a delalias6=$str_temp
|
|
fi
|
|
done
|
|
fi
|
|
|
|
#add the new configured ip address
|
|
old_ifs=$IFS
|
|
IFS=$' '
|
|
array_ip_mask_temp=($str_ip_mask_pair)
|
|
IFS=$old_ifs
|
|
for str_new_ip in ${array_ip_mask_temp[@]}
|
|
do
|
|
str_ip_status=$(hashget hash_new_config $str_new_ip)
|
|
if [ "$str_ip_status" = "new" ];then
|
|
log_info "configeth on $NODE: add $str_new_ip for $str_nic_name temporary."
|
|
add_ip_temporary $str_new_ip $str_nic_name
|
|
fi
|
|
done
|
|
|
|
#change the nic status to up
|
|
chdev -l $str_nic_name -a state=up
|
|
if [ $? -ne 0 ]; then
|
|
log_error "chdev -l $str_nic_name -a state=up failed."
|
|
error_code=1
|
|
fi
|
|
else
|
|
str_history=''
|
|
bool_restart_flag=0
|
|
bool_modify_flag=0
|
|
str_nic_status='down'
|
|
str_his_file=${str_cfg_dir}xcat_history_important
|
|
str_history=`ip addr show dev $str_nic_name | grep inet | grep -iv dynamic | grep -iv link | grep $str_nic_name | awk '{print $2}'`
|
|
old_ifs=$IFS
|
|
IFS=$'\n'
|
|
array_ip_old_temp=($str_history)
|
|
IFS=$old_ifs
|
|
ip link show dev $str_nic_name | grep -i ,up
|
|
if [ $? -eq 0 ];then
|
|
str_nic_status='up'
|
|
if [ -f "${str_his_file}" ];then
|
|
cat ${str_his_file} | grep $str_nic_name
|
|
if [ $? -eq 0 ];then
|
|
str_nic_status='up'
|
|
for str_old_ip in ${array_ip_old_temp[@]}
|
|
do
|
|
str_old_ip=`echo $str_old_ip | tr '/' '_'`
|
|
str_ip_staus=$(hashget hash_new_config $str_old_ip)
|
|
if [ -n "$str_ip_staus" ];then
|
|
hashset hash_new_config $str_old_ip "old"
|
|
else
|
|
bool_modify_flag=1
|
|
log_info "configeth on $NODE: delete $str_old_ip for $str_nic_name temporary."
|
|
str_old_ip=`echo $str_old_ip | tr '_' '/'`
|
|
ip addr del $str_old_ip dev $str_nic_name
|
|
if [ $? -ne 0 ]; then
|
|
log_error "ip addr del $str_old_ip dev $str_nic_name failed."
|
|
error_code=1
|
|
fi
|
|
fi
|
|
done
|
|
else
|
|
bool_restart_flag=1
|
|
bool_modify_flag=1
|
|
fi
|
|
else
|
|
bool_restart_flag=1
|
|
bool_modify_flag=1
|
|
fi
|
|
else
|
|
bool_restart_flag=1
|
|
bool_modify_flag=1
|
|
fi
|
|
|
|
#check if there are extra param values have been set or not
|
|
#if set, always restart the the nic
|
|
if [ ${#array_nic_params[@]} -gt 0 ]; then
|
|
bool_restart_flag=1
|
|
bool_modify_flag=1
|
|
fi
|
|
|
|
if [ $bool_restart_flag = 0 ];then
|
|
#add the new defined ip
|
|
old_ifs=$IFS
|
|
IFS=$' '
|
|
array_ip_mask_temp=($str_ip_mask_pair)
|
|
IFS=$old_ifs
|
|
for str_new_ip in ${array_ip_mask_temp[@]}
|
|
do
|
|
str_ip_status=$(hashget hash_new_config $str_new_ip)
|
|
if [ "$str_ip_status" = "new" ];then
|
|
bool_modify_flag=1
|
|
if [ $bool_restart_flag -eq 0 ];then
|
|
log_info "configeth on $NODE: add $str_new_ip for $str_nic_name temporary."
|
|
add_ip_temporary $str_new_ip $str_nic_name
|
|
fi
|
|
fi
|
|
done
|
|
fi
|
|
#configure the ipv6 default route
|
|
if [ $bool_restart_flag -eq 0 -a -n "$str_ipv6_gateway" ];then
|
|
ip -6 route | grep default | grep $str_ipv6_gateway
|
|
if [ $? -ne 0 ];then
|
|
log_info "configeth on $NODE: the default ipv6 route changes to $str_ipv6_gateway."
|
|
ip -6 route del default
|
|
ip -6 route add default $str_ipv6_gateway dev $str_dev_name
|
|
fi
|
|
fi
|
|
|
|
#modify the configuration files
|
|
if [ $bool_modify_flag -eq 1 ];then
|
|
if [ $bool_restart_flag -eq 1 ];then
|
|
if [ "$str_nic_status" = "up" ];then
|
|
if [ "$str_os_type" = "debian" ] && [ "$netplan_active" = "1" ];then
|
|
#the netplan_apply that brings the link back is gated on reboot_nic_bool,
|
|
#so taking it down here ungated leaves the NIC down until the next reboot
|
|
#in the provision postscripts stage -- over the NIC we are talking on.
|
|
if [ $reboot_nic_bool -eq 1 ]; then
|
|
ip link set dev $str_nic_name down > /dev/null 2>/dev/null
|
|
fi
|
|
elif [ "$str_os_type" = "debian" ];then
|
|
ifdown --force $str_nic_name > /dev/null
|
|
else
|
|
if [ $reboot_nic_bool -eq 1 ]; then
|
|
ip link set dev $str_nic_name down > /dev/null 2>/dev/null
|
|
fi
|
|
fi
|
|
fi
|
|
#delete all old ip address
|
|
for str_old_ip in ${array_ip_old_temp[@]}
|
|
do
|
|
ip addr del $str_old_ip dev $str_nic_name
|
|
done
|
|
fi
|
|
log_info "configeth on $NODE: $str_nic_name changed, modify the configuration files"
|
|
num_ipv4_index=0
|
|
num_ipv6_index=0
|
|
num_index=0
|
|
if [ -e "$str_his_file" ];then
|
|
grep $str_nic_name $str_his_file
|
|
if [ $? -ne 0 ];then
|
|
echo "${str_nic_name}" >> $str_his_file
|
|
fi
|
|
else
|
|
echo "${str_nic_name}" > $str_his_file
|
|
fi
|
|
#delete the old alias configuration files on redhat
|
|
if [ "$str_os_type" = "redhat" ];then
|
|
rm -f /etc/sysconfig/network-scripts/ifcfg-${str_nic_name}:* 2>/dev/null
|
|
fi
|
|
while [ $num_index -lt ${#array_nic_ips[*]} ];do
|
|
str_ip=${array_nic_ips[$num_index]}
|
|
str_subnet=${array_nic_subnet[$num_index]}
|
|
str_netmask=${array_nic_netmask[$num_index]}
|
|
str_gateway=${array_nic_gateway[$num_index]}
|
|
str_mtu=${array_nic_mtu[$num_index]}
|
|
if [ $num_index -lt ${#array_nic_params[@]} ]; then
|
|
str_extra_params=${array_nic_params[$num_index]}
|
|
else
|
|
str_extra_params=$str_default_token
|
|
fi
|
|
|
|
# make sure each parameter has a value
|
|
if [[ -z "$str_gateway" ]]; then
|
|
str_gateway=$str_default_token
|
|
fi
|
|
|
|
if [[ -z "$str_mtu" ]]; then
|
|
str_mtu=$str_default_token
|
|
fi
|
|
|
|
if [ ! $str_subnet -o ! $str_netmask ];then
|
|
num_index=$((num_index+1))
|
|
continue
|
|
fi
|
|
|
|
|
|
if [ `echo $str_ip | grep -E '^([0-9]{1,3}\.){3}[0-9]{1,3}$'` ];then
|
|
configipv4 $str_nic_name $str_ip $str_subnet $str_netmask $num_ipv4_index "$str_extra_params" $str_mtu
|
|
num_ipv4_index=$((num_ipv4_index+1))
|
|
elif [ `echo $str_ip | grep -E ":"` ];then
|
|
configipv6 $str_nic_name $str_ip $str_subnet $str_netmask $num_ipv6_index $num_ipv4_index $str_gateway "$str_extra_params"
|
|
num_ipv6_index=$((num_ipv6_index+1))
|
|
else
|
|
num_index=$((num_index+1))
|
|
continue
|
|
fi
|
|
num_index=$((num_index+1))
|
|
done
|
|
else
|
|
log_warn "configeth on $NODE: $str_nic_name no changed, return directly."
|
|
fi
|
|
|
|
#restart the nic
|
|
if [ $bool_restart_flag -eq 1 ];then
|
|
if [ "$str_os_type" = "debian" ] && [ "$netplan_active" = "1" ];then
|
|
#`netplan apply` has no per-interface form: it re-applies every netdef on the node.
|
|
#In the diskful provision postscripts stage that would bounce the install NIC the
|
|
#postscripts are still talking over, which is what reboot_nic_bool guards against
|
|
#for the redhat arm below. The drop-in is written either way and takes effect at
|
|
#boot, so skipping the apply here costs nothing.
|
|
if [ $reboot_nic_bool -eq 1 ]; then
|
|
netplan_apply "$str_nic_name"
|
|
if [ $? -ne 0 ]; then
|
|
error_code=1
|
|
fi
|
|
fi
|
|
elif [ "$str_os_type" = "debian" ];then
|
|
ifup -a -i /etc/network/interfaces.d/$str_nic_name
|
|
if [ $? -ne 0 ]; then
|
|
log_error "ifup -a -i /etc/network/interfaces.d/$str_nic_name failed."
|
|
error_code=1
|
|
fi
|
|
else
|
|
if [ $reboot_nic_bool -eq 1 ]; then
|
|
if_state=0
|
|
echo "bring up ip"
|
|
if [ $networkmanager_active -eq 1 ]; then
|
|
nmcli con modify $con_name ipv4.dns "${NAMESERVERS}"
|
|
nmcli con reload
|
|
nmcli con up $con_name
|
|
else
|
|
ifup $str_nic_name
|
|
fi
|
|
if [ $? -ne 0 ]; then
|
|
if_state=$(wait_for_ifstate $str_nic_name UP 20 5)
|
|
fi
|
|
if [ $if_state -ne 0 ]; then
|
|
log_error "bring $str_nic_name up failed."
|
|
error_code=1
|
|
fi
|
|
fi
|
|
fi
|
|
fi
|
|
fi
|
|
if [ $networkmanager_active -eq 1 ] && [ -n "$tmp_con_name" ]; then
|
|
if [ $error_code -eq 1 ]; then
|
|
nmcli con modify $tmp_con_name connection.id $con_name
|
|
else
|
|
nmcli con delete $tmp_con_name
|
|
fi
|
|
fi
|
|
# The last nmcli con up above dropped the keys NM does not model. Do not reload after this.
|
|
if [ "$str_os_type" = "redhat" ] && [ "$networkmanager_active" = "1" ]; then
|
|
xcat_nm_persist_nic_extra_params "xcat-${str_nic_name}" "${array_nic_params[@]}"
|
|
fi
|
|
exit $error_code
|