Sixteen assertions on this branch matched a regular expression against the
source of the code they test. Such an assertion passes when the code is moved
somewhere it never runs, and fails when the file is reformatted and nothing
has changed: a perltidy respace of updatenode.pm:1606 turned
updatenode_ipv6_endpoint.t red with the behaviour unchanged.
updatenode_ipv6_endpoint.t now runs updatenoderunps and updatenodesoftware
and reads the xdsh command each one dispatched. It also covers the service
node name that has no usable endpoint, which the regular expressions could
not reach.
anaconda.pm built the debug syslog kernel arguments inline inside two large
subs. Move each to its own sub, _netboot_syslog_kcmdline_args and
_install_syslog_kcmdline_args, and render them in the test. An unusable
server name now gives no syslog arguments, where it gave "syslog.server="
with nothing after it.
pping is a program with no sub API, so the nmap and fping command building
moves to xCAT::DSHCore as nmap_ping_command and fping_ping_command, and pping
stays the caller that forks and execs the list.
credentials_ipv6_callback.t read allowcred.awk as text, and ran gawk from a
.t. The awk program is covered by xCAT-test/bats/ipv6_allowcred_awk.bats,
which starts it and speaks the credential protocol to it over both families.
Stubbing Socket6 and IO::Socket::INET6 in %INC also unskips the four
_open_callback_socket assertions, which skipped where the suite runs.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
An IPv6-only provisioning network cannot deploy a node. The discovery and
credential callbacks open IPv4 sockets, the kickstart and boot templates
render an IPv4 address into every endpoint, and makehosts drops an IPv6
value because hosts.pm gates on isIpv4addr.
NetworkUtils gains the address helpers the rest of the change uses:
format_host_port, parse_host_port and format_uri_host bracket an IPv6
literal, getNodeNetworkCfg6 reads the static IPv6 configuration of a node,
my_ip_facing_family selects the management-node address of one family,
getIPv6ReverseZone builds a nibble-aligned reverse zone, and
node_is_ipv6_only and ipv6_server_for_node answer the two questions the
plugins used to answer for themselves. credentials.pm opens the callback
socket through IO::Socket::INET6 when the modules are present and keeps the
IPv4 path when they are not. Template.pm and anaconda.pm render an IPv6
kickstart network line and bracketed endpoints. The postscripts and the
stateless xcatroot format every endpoint through the bracketing helpers.
xCAT-server requires perl-IO-Socket-INET6 and perl-Socket6 on EL, and
libio-socket-inet6-perl and libsocket6-perl on Debian.
(cherry picked from commits c0a69bb5a and caa8ca790)
Ported onto upstream master ee6b4f532. The two commits are folded because the
second refactors the first. Master is kept where it has a newer form of the
same thing: the getipaddr cache guard, the Kea control_socket_path helper, the
netboot method list, install_device_params, the modern_installer test and the
isValidIp validator, which replaces the isValidIPAddress this branch added.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
(cherry picked from commit 3928c04507)
The candidate list of comment_bind_address was assigned by a top-level
statement below the main flow's exit, so the statement never ran. The list
was empty, the fallback index read undef, and mysqlsetup -i failed with
"cannot read : No such file or directory" on every MySQL cluster. The
service node install stops there.
A BEGIN block now fills the list at compile time.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
mysqlsetup commented the bind-address line by writing the result to
/tmp/my.cnf and renaming it over the configuration file. A file created in
/tmp takes user_tmp_t, and a rename keeps the type of the file it moves, so
the management node was left with a MySQL configuration that mysqld is denied
read of. The denial survives the command and was seen in three rounds of the
SELinux campaign. The temporary path is also a fixed name in a world writable
directory, written as root.
comment_bind_address now reads the file, substitutes the line and writes the
result back through the same file. Truncating in place keeps the inode, which
is what carries the label, so no relabel is needed afterwards. The candidate
list moves to @BIND_FILES and the resolution order does not change: the
Ubuntu mariadb.conf.d file, then /etc/mysql/my.cnf, then /etc/my.cnf.
mysqlsetup_bind_address_label.t drives the sub against a scratch tree and
asserts the inode survives, that only a line starting with bind is commented,
and that no temporary file is left beside the target. With the rewrite put back
through a renamed file in /tmp, the inode check is the one check of the
thirteen that fails.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
pasu strips OneCLI's banner and status lines so only the requested settings are
shown, but OneCLI has grown several status lines over the years that were not
filtered and leaked into the output. Add the missing patterns.
Recovered from the unmerged lenovobuild branch (229533cb, a6932bb4), which added
"Connected to BMC at IP address" (master only matched "by"), "Succeed in running
the command:" and "start to convert cmd.". Extended after testing a current
OneCLI 5.3.0 on a Lenovo ThinkSystem SR635, which also emits "Start to connect
...", "Connected to the node(N) by KCS" and a trailing "Succeed." -- now
filtered too.
Validated by running a real OneCLI 5.3.0 "config show" through the filter:
every banner/footer line is removed and all 756 setting lines pass unchanged.
Co-authored-by: Jarrod Johnson <10814490+jjohnson42@users.noreply.github.com>
tcons opens an rcons console per node in a tiled tmux session. On tmux 3.x
(shipped by all currently supported platforms) it no longer works:
* The session was named "tcons.$$". Modern tmux treats "." as the
session:window.pane target separator, so "tmux attach -t tcons.$$" is
parsed as session "tcons", pane "$$" and fails with "can't find
session"/"can't find pane" -- tcons cannot attach to the session it
just created. Rename it to "tcons_$$".
* The per-node "tmux select-pane", "tmux split" and "tmux select-layout"
commands had no target. When tcons is run from inside an existing tmux
session (the common case) they act on the caller's current session
instead of the detached tcons session, splitting the operator's own
window. Target every command explicitly at the tcons session.
* Move the pane-border-status option inside the loop so the console title
is set on each pane as it is created.
Validated on tmux next-3.4: the reworked script builds a 3-pane tiled
session with no errors, whereas the previous version's dotted session name
is unaddressable ("can't find pane").
Recovered from the unmerged lenovobuild branch (originals 5107b6ba1,
cefefa7d1, 6c72a2707, e040d24bb).
Co-authored-by: Jarrod Johnson <10814490+jjohnson42@users.noreply.github.com>
When nodehm.conserver is a hostname, rcons compared that name directly against
the management node's local IP addresses, so the "conserver is this host"
check never matched and rcons connected via `-s` (a remote confluent session)
even when the conserver was the local host. Resolve the name to an address
with getent first so the comparison works.
Recovered from the unmerged lenovobuild branch (original faa767e5).
Co-authored-by: Jarrod Johnson <10814490+jjohnson42@users.noreply.github.com>
There's a typo on genimage thats easy to fix, also the explanation for
Fedora is extremely outdated, on modern Fedora releases statelite is
generated automatically:
[root@headnode ~]# lsdef -t osimage
fedora35-x86_64-install-compute (osimage)
fedora35-x86_64-install-service (osimage)
fedora35-x86_64-netboot-compute (osimage)
fedora35-x86_64-statelite-compute (osimage)
Also theres a typo on OpenStack setup that grep caught, so we added
it too the commit, for cosmetic reasons.
* * osimage table schema change: add a "environvar" col in osimage table to hold environment variables used in osimage customized files
* osimage object schema change: add a environvar attribute, which refers to osimage.environvar
* the environment variables specified in "environvar" attribute will be exported during invocation of postinstall scripts in genimage
* support variables in synclists
* support environment variables in genimage,mkinstall,getpostscript
* support environment variables for xdcp -i -F in packimage
* add support for syncfiles with scp
* refine logic of EXECTUTE support message non rsync filesync
* refine syncfiles
* add startsyncfile script for cumulus
* refine format, fix updatenode without options causes command to crash #5142