Two ways the Subiquity install could fail without saying anything useful.
The boot flip read from the install monitor with no timeout. A monitor that accepts the
connection and then never answers -- which #7759 shows is a state it gets into -- blocked the read
forever, and with it the Subiquity late-command and the install. The retry loop could not help:
it never reached the retry. Both reads now take -t 10, so five attempts are bounded at roughly two
minutes and end in the failure that is already logged. The regression test stands up a listener
that accepts and holds the connection; removing the timeouts fails it.
mkinstall resolved the install server for nfsroot and fell back to the name when that failed:
"getipaddr($instserver) || $instserver". The name is the original defect -- klibc's nfsmount
cannot resolve one -- so the node panicked "can't parse IP address" at boot, on the node, with
nothing reported on the management node. The management node knows at template time, so it says
so there and skips the node, as the other unrecoverable per-node conditions in this routine do.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
toram copies the live filesystem into RAM, so the node needs memory for it on top of the
installer -- about 1.5G on 24.04 and growing per release. Nothing enforced or documented that.
A node with too little fails part-way and reboots into the installer, which looks like a
boot-flip failure rather than an out-of-memory condition, so the troubleshooting page says
where to look and how to raise vmmemory.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
Three passes of the same reasoning had accumulated: in the code, in the POD of the routines the
previous commit extracted, and again in the test headers. Say each once, where the reader needs it.
The POD blocks were the worst of it -- extracting subiquity_kcmdline() and
defer_syncfiles_to_postboot() moved the essays out of the routines but did not shorten them. The
toram paragraph ran eleven lines for one kernel argument; the exact systemd-shutdown message and
the size of the 24.04 layers are colour, not reasoning.
The template's two comments and the apt-sources pair are trimmed the same way: the sources.list
explanation lives in Template.pm, and the test says which case it is checking and points there.
That the tests still pass after rewriting the template is the point of the previous commit -- a
test matching its text would have broken here.
47 comment and POD lines removed, no behaviour change.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
The tests added with this fix matched regexes against the text of debian.pm, Postage.pm and
compute.subiquity.tmpl. A source match cannot tell whether the code it found ever runs: moving
the Subiquity command line into its own routine leaves every one of those assertions passing,
and reformatting a line fails them while the behaviour is untouched. One of them pinned Perl
syntax outright, qr/\$kcmdline\s*\.=\s*" ---";/, and another matched the text of a substitution.
Run the code instead.
Two decisions were lifted out of the routines that had grown around them, so a test can call
them: subiquity_kcmdline() in debian.pm builds the installer command line from its inputs, and
defer_syncfiles_to_postboot() in Postage.pm returns the adjusted postscript lists. Both are pure
and carry the reasoning that used to sit inline. The callers keep their behaviour exactly.
The template's two shell fragments are extracted and executed: the boot flip runs against a
stand-in for xcatd on the install-monitor port, and the resolv.conf step runs with a getent that
answers as the case requires.
Every assertion now fails when the behaviour it describes is removed, which is what the source
matches only appeared to do:
boot=casper dropped from the command line 1 assertion fails
toram dropped 1 assertion fails
nfsroot given the host name instead of the IP 2 assertions fail
the deferral made a no-op 7 assertions fail
the wrong token sent to xcatd 1 assertion fails
the failed-flip log line removed 3 assertions fail
the retry loop reduced to one attempt 2 assertions fail
resolv.conf given the host name 3 assertions fail
the resolution fallback removed 2 assertions fail
ubuntu_subiquity_bootparams.t is removed. Its three matches are covered by execution in
debian_subiquity_netboot.t, and it demonstrated the problem: it still passed after the command
line moved into another routine.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
Boot the live installer correctly. Add boot=casper so casper actually processes
netboot=nfs instead of scanning local disks and panicking, resolve the install server
to a literal IP because casper mounts the live filesystem with klibc's nfsmount which
has no resolver, and add toram so casper copies the squashfs into RAM and unmounts the
NFS source. That last one is what lets the node reboot at all: with the NFS root still
mounted, systemd-shutdown waits forever on an lvm/pvscan wedged in uninterruptible I/O
on it and the node never power-cycles into the disk it just installed. casper has no
cmdline knob for NFS mount options -- it parses only nfsroot= and takes the whole value
as the path -- so toram is its supported way to avoid a network root.
Write the installer's resolv.conf nameserver as an IP. glibc's resolver discards a
hostname given on a nameserver line, so the xcatmaster name left the installer, and
the in-target apt that inherits the file, with no DNS at all.
Add the online archive through apt `sources:` on classic-sources releases, where
Subiquity renders the target sources.list from the install media alone and in-target
apt cannot find packages the ISO does not carry. Deb822 releases are excluded: their
primary mirror already lands in ubuntu.sources, so legacy .list files would configure
the same suites twice.
Flip the node to local-disk boot from the live installer over bash's /dev/tcp instead
of relying on updateflag.awk, which needs gawk's |& coprocess while Ubuntu's
/usr/bin/awk is mawk. The exchange is checked, and a failure is recorded in the
install log rather than silently PXE-looping into another install.
Defer syncfiles to the postbootscripts on the diskful install path, so it runs on the
booted node with sshd up rather than inside the in-target chroot where the MN cannot
reach it.
Make the test harness's provision wait overridable through WAIT_FOR_PROVISION; the
default stays short so a boot loop still fails fast.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
This configures automated installation using the subiquity installer, as
documented at
https://ubuntu.com/server/docs/install/autoinstall-quickstart and other
locations on the Internet.
Installation uses the NFS export of /install, and configures the
installer to use the nocloud-net datasource, creating a per-node
directory containing the processed template file as the user-data file,
and an empty meta-data file.
Kernel and initrd files are pulled from the casper/ directory under the
package dir.
Unnecessary elements of the kernel command line have been removed in the
subiquity installer path.
Support has been added for selecting a subiquity specific default
template, as well as an updated pre-install script and some minor POSIX
shell compliance fixes for the getinstdisk script.
- URL for kernel/initrd, get the value from below value tftpserver -> xcatmaster -> myipfn
- URL for image, get the value from below value nfsserver -> tftpserver -> xcatmaster -> myipfn
This patch refactor the interface to get xcatmaster and tftpserver
attributes in the subvars subroutine to improve the performance.
partial-issue: #3958
With the nytprof tool, the buttleneck is the time to update the bootparams
table.To optimize the performance on large scale nodes, this patch tranfer
the bootparams hash through variable reference.
posible impact: getdestiny can not get the information about bootparams.
partial-issue: #2024
directories, the last one was being used. However, the first one
on the list should be used per man page:
"The first path in the value of osimage.pkgdir must be
the OS base pkg dir path,..."
Fixing to use the first directory specified.
Also fixed a bunch for formatting, space, tab issues...
Daniel Hilst
Vinícius Ferrão
Samveen
Mark Gurevich
Simon Fowler
yangsbj
yangsong
bybai
GONG Jie
Jarrod Johnson
Bin Xu
Bin Xu
chenglch
penguhyang
zet809
huweihua
ligc
Victor Hu