Every compute and service node was provisioned with SELinux disabled.
mknetboot added selinux=0, the kickstart templates said selinux
--disable, and the genimage postinstall and the dracut hooks wrote
SELINUX=disabled into the image. noderes.selinux and site.selinux had no
consumer on the node side.
The mode that xCAT::SELinux->node_modes resolves now reaches the node:
- Kernel command line: mknetboot appends kcmdline_selinux(): selinux=0
for disabled, enforcing=0 for permissive, nothing for enforcing. An
image built without the relabel hook (EL7 and older), and a squashfs
image without labels, boot with selinux=0 and nodeset says why.
Test: selinux_netboot_kcmdline.t.
- Kickstart: #SELINUXMODE# and #SELINUXRELABEL# in xCAT::Template. The
rh el8/9/10, riscv64 and openEuler templates use them; the %post ends
with restorecon -RF over the paths the xCAT scripts write. mkinstall
warns when a template cannot express the mode of the node.
Test: selinux_kickstart_template.t.
- genimage: the el8-10 postinstalls no longer write SELINUX=disabled, and
the stateless xcatroot no longer writes /etc/sysconfig/selinux. genimage
sets SELINUX=enforcing in the image, adds dracut 98selinux, and installs
a pre-pivot hook that runs setfiles with the image file_contexts unless
selinux=0 is set. Tests: selinux_image_config.t, selinux_relabel_hook.bats.
- packimage -m squashfs stores the labels of the image policy through
mksquashfs pseudo xattr definitions (squashfs-tools 4.6 or later), and
writes rootimg.sfs.selinux beside the image. Test:
selinux_squashfs_labels.t.
- Service nodes mount /install and /tftpboot from the management node with
context=public_content_t and tftpdir_t when SELinux is on.
Test: selinux_sn_mount_options.t.
- makedns no longer warns about SELinux. xcatprobe xcatmn checks the xcat
module and the labels of installdir and tftpdir instead of failing on
enforcing. Test: probe_utils_selinux_policy.t.
The selinux/cases1 xcattest cases provision a diskful, a stateless and a
squashfs node enforcing, and a stateless node with site.selinux=disabled.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
An unknown x86 client now fetches its Genesis script from
xcat/ipxe/nets. xcatprobe discovery checked the scripts of each network
under xcat/xnba/nets, and marked the boot loader stage only for a
download from there. It now checks xcat/ipxe/nets, and marks the stage
for a download from either directory.
osdeploy marked a node as loading its boot loader only when it fetched a
file under xcat/xnba, the POWER grub2 image, or yaboot. A node on the
upstream loader fetches xcat/ipxe/..., so osdeploy missed that stage.
Move the match into probe_utils and add xcat/ipxe/.
Both copies wrote the capture to /tmp/dhcpdumpfile.log, so a file left by
another user or an earlier root run blocked the probe and two runs
overwrote each other. tcpdump ran behind a shell, so the script killed it
by searching the process table for any tcpdump on the interface, and a
tcpdump that failed to start left an empty file that read as zero DHCP
servers. An interrupt left the capture running.
The capture file is now a private temporary file removed on every exit.
The child execs tcpdump itself, so the script stops and reaps exactly that
pid, and a tcpdump that ended before the window did fails the run. A
failed send and an INT or TERM stop the capture and exit 1 as well.
Signed-off-by: Vinícius Ferrão <2031761+viniciusferrao@users.noreply.github.com>
Both copies refused to run unless /usr/sbin/tcpdump existed. Debian and Ubuntu
install it as /usr/bin/tcpdump, so the rogue DHCP detector never ran there and
the probe reported its tcpdump check as failed.
Resolve tcpdump through PATH and the standard system directories with
CommandUtils::find_executable, run the resolved path, and match that path when
the capture process is killed at the end.