6af6ed227e
Merge tag '2.15.0' into lenovobuild
2020-01-24 10:39:24 -05:00
943905724e
Enable IPMI over IPv6 for SR635/SR655
2019-12-05 09:58:14 -05:00
9786c542f1
Extend duration of the TSM restart
...
The TSM restart seemed inadequate in testing
2019-12-03 17:01:47 -05:00
5b98b4c7b6
Confirmed that there is another deeper problem
...
Extend and retry bringup attempt
2019-12-03 12:12:17 -05:00
70c13189cd
Revert "Remove TSM networking restart"
...
This reverts commit 87df6c9ab6
2019-12-03 12:03:35 -05:00
87df6c9ab6
Remove TSM networking restart
...
The cause of the problems was likely a NCSI failover
behavior.
2019-12-03 11:49:54 -05:00
6d17223f25
Fix bmcsetup syntax mistake
2019-11-22 14:08:36 -05:00
1da1c23d40
Attempt another strategy for TSM network config
2019-11-21 08:31:21 -05:00
8128989802
Abandon trying to run the dedicated in ipv6 mode.
...
The network stack on the TSM is unable to handle this
situation well.
2019-11-20 10:03:14 -05:00
55472c8654
Try another strategy for bmcsetup
...
Try to disable the channel and re-enable.
2019-11-19 16:34:31 -05:00
408cf2b353
Adapt channel number dynamically
...
SR635/SR655 lan channel identity may swap.
Use the oem command to determine the correct
port.
2019-11-19 15:35:48 -05:00
765e2ad358
Force only one path in SR635/SR655
...
In some scenarios, it can cause confusion for both interfaces
to be enabled. Leave the dedicated port with ipv6 only and
disable the shared otherwise.
2019-11-18 14:33:59 -05:00
02da8a6b4f
Enable IPMI on SR635/SR655
2019-11-15 14:51:14 -05:00
42357f9d67
Fix SR635/SR655
...
First, have to preclude the generic thinksystem treatment.
Also, IPMI 1.5 is no longer supported and we don't need it
so stop enabling it.
2019-11-12 11:59:11 -05:00
922dfe18c4
Enable bmcsetup for Lenovo SR635/SR655
...
The SR635/SR655 has a particular scheme for dedicated/shared
and hard coded correlated lan channels. Implement
support for those scenarios.
2019-11-12 11:17:35 -05:00
949532f362
Add sleep after port change
...
The BMC net configuration was not yet ready in the wake
of having had the port changed immediately. Put in an
opportunity for net cfg to catch up.
2019-10-23 08:46:32 -04:00
aaaa5755df
Revert "Rearrange bmcsetup"
...
This reverts commit ff3e6c9557
2019-10-23 08:45:12 -04:00
2d706b9c75
bmcsetup Other LAN and 802.3 LAN for Channel Medium Type
2019-10-22 11:51:23 -04:00
ff3e6c9557
Rearrange bmcsetup
...
The password must be set first in some platforms.
2019-10-17 11:11:28 -04:00
bdaf5b80db
Accept the probability that the route is already added
2019-08-22 09:21:33 -04:00
afc999c43c
Fix incorrect interpreter
...
The incorrect interpreter was indicated
2019-08-22 09:20:22 -04:00
1b4af4fee0
Add new file to rpm manifest
2019-08-22 08:38:43 -04:00
4a459177e1
Implement IPMI enablement through redfish
...
Newer firmware will disable IPMI by default.
If a user is using bmcsetup, they are preparing explictly
to use with IPMI, so use redfish to turn on the IPMI.
2019-08-21 16:23:49 -04:00
5f92abd078
Have autocons auto-react to SOL connect
...
When connecting, DCD indicates the activity. Use DCD
to commence/discontinue the SOL console.
2019-03-14 13:03:47 -04:00
15866feb45
Revise the autoconsole dracut hook
...
It was trying to run before there was a screen to attach.
2019-03-13 16:30:52 -04:00
50298b5d92
Add new contents to rpm spec file
...
The autocons components were missing.
2019-03-13 15:04:09 -04:00
bff2877061
Add autocons to Genesis
...
This permits genesis to use ACPI to determine console
after boot. This isn't as good as console=, but it's
close for most scenarios.
2019-03-13 14:51:39 -04:00
dad3f26b9c
Merge tag '2.14.3' into lenovobuild2.14
...
xCAT 2.14.3 release
2018-08-24 09:05:24 -04:00
aeeebd5fc7
Add IB support to genesis
2018-07-27 10:06:20 -04:00
9ece12e4ea
Do not keep doing ethtool after net inits
...
This can interfere with other programs.
2018-07-20 15:36:24 -04:00
292de9deb3
Correct wrong port in sshd config
2018-06-28 11:05:41 -04:00
34bffaa8e4
Add 3389 ssh port
...
It just so happens that 3389 (RDP) is forwarded by default
by Lenovo IMMs. Take advantage of this to offer a way to
ssh in through IMM/XCC.
2018-06-28 09:55:41 -04:00
3bbfafad4d
Merge tag '2.14.1' into lenovobuild2.14
...
xCAT 2.14.1 release
2018-06-01 09:51:20 -04:00
4fa468920d
Merge branch '2.14.0' into lenovobuild2.14
2018-05-16 15:41:38 -04:00
9d5dede0d1
update node status when enter shell/standby
2018-04-25 04:46:12 -04:00
8f61ee5ace
Add ondiscover support for chain table ( #4903 )
...
* Add ondiscover support for chain table
* For ondiscover, run nextdestiny after the current operation is done
* Don't set OpenPower server boot from network if boot
2018-03-29 17:50:04 +08:00
e16cea2688
Merge tag '2.13.11' into lenovobuild2.13
...
xCAT 2.13.11 release
2018-03-26 10:49:04 -04:00
7d3c3c41b9
Merge pull request #4863 from robin2008/nodediscover
...
Failed to discover nodes as the discovery method is set to undef by wrong
2018-03-01 15:59:45 +08:00
b962479353
Fix the issue: Failed to discover nodes as the discovery method is set to udef by wrong ( #4860 )
...
- zvmdiscovery plugin will not handle findme
- not change request if no temp discovered bmc nodes, to avoid the confusing error message
- add more logs, and ignore the `ipmitool sol info` error output
2018-03-01 15:20:25 +08:00
721d77b6bc
Remove "dynamic" checking in the doxcat scripts
2018-02-27 16:42:14 -05:00
4af7ba619b
Merge pull request #4781 from stanford-rc/dodiscovery_syntax
...
dodiscovery: fix syntax error in case flag_serial is not defined
2018-02-02 14:05:37 +08:00
ea9b20e1fe
dodiscovery: fix syntax error in case flag_serial is not defined
2018-02-01 17:34:29 -08:00
c6d0cbb094
Merge pull request #4760 from stanford-rc/MTM_fixes
...
dodiscovery: fallaback to DMI if FRU is incomplete
2018-02-01 09:41:48 +08:00
49b8f0cf44
dodiscovery: FRU info may be present may incomplete. Check the contents
...
of MTM obtained from FRU and fallback to DMI if it's empty.
2018-01-31 16:47:28 -08:00
e32d37e625
bmcsetup: add missing / in /dev/null
2018-01-24 11:20:23 -08:00
179b1cdf6c
modify directory to copy bmcsetup/getipmi scripts ( #4649 )
2018-01-17 23:48:13 -06:00
a2d2ed1d34
From 2.13.10, the genesis scripts is moved to usr/bin or usr/sbin
2018-01-17 03:41:35 -05:00
63a3efe8bb
move /*bin to /usr/ to fix path conflict of genesis base and scripts
...
RH7/Centos7 and recent versions of fedora relocate `/*bin/*` into `/usr/*bin/`. This causes
conflicts for upgrades against xCAT-genesis-scripts-* packages which expect the `/bin` a to be
a directory while `xCAT-genesis-base-*` packages provide a link. Relocating all files into `/usr`
fixes that conflict and allows a clean upgrade from all old versions.
2018-01-12 06:06:25 +00:00
6dac9ae943
Remove trailing spaces in file xCAT-genesis-scripts/usr/bin/updateflag.awk
2017-12-31 23:59:59 +00:00
815d4a5653
Remove trailing spaces in file xCAT-genesis-scripts/usr/bin/update_flash
2017-12-31 23:59:59 +00:00
Jarrod Johnson
Mark Gurevich
XuWei
cxhong
zet809
Bin Xu
Casandra Qiu
Kilian Cavalotti
Samveen Gulati
GONG Jie