Add a new pdutype (genpdu) for PDUs implementing the Raritan PDU2-MIB.
A single MIB covers the Raritan PX2/PX3/PX4/PXC/SRC/PXO/BCM series, the
Server Technology PRO3X/PRO4X series, the Legrand intelligent PDUs, and
all PDUs following the PDU2-MIB.
Supports rpower (whole-PDU and per-outlet), rinv and rvitals over SNMP
v1, v2c or v3, with credentials read from the pdu table).
Unlike the existing types, sensor units and decimal precision are read
from the MIB per sensor rather than hardcoded, so readings are correct
across models that report differing precision for the same sensor.
Outlet switching capability is probed at connect time, so metered-only
models report a single "unsupported" message instead of a per-outlet error.
rspconfig is not supported for genpdu; PDU linking and BCM2/PMC power
meters are out of scope.
Tested on Raritan PX4-5851-E7V2 (fw 4.2.10.5-50400, switched),
PX3-1901U-N1 and PX3-1901U-N1A6 (fw 4.0.20.5-49038, metered), and
PX2-1901U-N1A6 (fw 4.0.20.5-49038, metered).
Signed-off-by: Kilian Cavalotti <kilian@stanford.edu>
The ^ noderange operator reads node names from a file. NodeRange opened
that file with a two-argument open. A two-argument open reads shell
metacharacters in the path, so a noderange such as ^"id|" ran a command.
xcatd expands a noderange while it processes a request, so the command
ran on the management node.
Use a three-argument open with an explicit read mode. The value is then
only ever a file name. The ^ operator keeps working: ^/tmp/nodes still
reads the file.
This fix was recovered from the lenovobuild branch. The original there
(commit for "Remove load from file in noderange support") removed the ^
operator. This keeps the documented operator and closes the command path
instead.
Boot URLs handed to nodes always carried an explicit :80 even when the HTTP
server listens on the default port. grub2.pm already omits the port when it is
80; make the xNBA, genesis and DHCP boot URLs consistent with it.
$portsuffix is empty when site.httpport is unset or 80 and ":<port>" otherwise,
so a non-default port is unchanged. Covers the ISC and Kea paths in dhcp.pm,
xnba.pm, mknb.pm, and the Kea xNBA client classes in BootPolicy.pm.
dhcp_boot_policy.t and mknb_xcatd_address.t follow the new URLs and gain cases
for a non-default and an unset port. The floating-address guard in
mknb_xcatd_address.t also drops :80 so that it keeps matching.
Recovered from the unmerged lenovobuild branch (cd61fd9d, a2f77ea9, 1035841b,
b7db0e2, 792fe6d).
Co-authored-by: Jarrod Johnson <10814490+jjohnson42@users.noreply.github.com>
Cumulus switch MAC discovery matched the fdb port with a regex that only
accepted a plain numeric swp name (dev swp([0-9]+)), then guessed among
swp5/05/swp05 formats. A node on a breakout port (swp1s0, swp1s1, ...) never
matched, so it was silently not discovered. Match any swp name (dev (swp[^ ]+))
and use it directly, dropping the format-guessing.
Gated: this whole block runs only for switchtype eq 'onie' (Cumulus/ONIE
switches); SNMP switches use a separate path and are unaffected.
Validated against real 'bridge fdb show' output (the stock iproute2 command
Cumulus runs over SSH): the old regex parses only 'dev swp1' and drops
'dev swp1s0'; the new regex parses both. Confirmed the environment on a booted
NVIDIA Cumulus VX 5.10.
Recovered from the unmerged lenovobuild branch (72d68bc7).
Recover several man-page clarifications that never merged from the lenovobuild
branch. All are documentation-only -- the man .pod sources with their
generated .rst, plus the networks-table description in Schema.pm:
* makedhcp / nodeset: note that UEFI boot directives are intentionally
omitted when nodetype.os names an OS without UEFI support, even for
'nodeset shell'.
* networks table dhcpserver: warn that it should be set only for service
node operation and that <xcatmaster> is not a valid value.
* noderange: clarify that the syntax is for xCAT.
* reventlog: note that unimplemented sensor types yield 'No Mappings Found'
and point to confluent's nodeeventlog facility.
* rcons: document confluent console auto-reconnect (a randomized 2-4 minute
retry, or 'ctrl-e o a' to force one); the original's stray backtick markup
is corrected.
Recovered from the unmerged lenovobuild branch (originals 2d4f12f4, 760f2f8b,
23d63d59, 44b47c44, c63d780f, db4dc42b).
Co-authored-by: Jarrod Johnson <10814490+jjohnson42@users.noreply.github.com>
formatNetmask() uses its first argument immediately (inet_aton($mask),
2**$mask, hex $mask) with no check that it is defined. Callers that pass an
undefined mask trigger "Use of uninitialized value" warnings and a
meaningless result instead of a clean failure.
Return undef up front when $mask is not defined.
Recovered from the unmerged lenovobuild branch (original acbbeb86).
Co-authored-by: Jarrod Johnson <10814490+jjohnson42@users.noreply.github.com>
Add a shared OMAPI policy helper for ISC DHCP and DDNS so administrators can select the key name, signing algorithm, and omshell path from the site table while preserving the existing xcat_key hmac-md5 default.
Keep local ISC updates from hanging indefinitely when omshell does not exit, and use a static host-declaration fallback for local Ubuntu ISC releases where omshell is unstable for xCAT host updates.
Co-authored-by: gskouson <1507929+gskouson@users.noreply.github.com>
Vinícius Ferrão
Vinícius Ferrão
Daniel Hilst
Kilian Cavalotti
Markus Hilger