List openEuler 24.03 LTS SP4 on riscv64 in the openEuler guide, the
riscv64 guide and the support matrix. The scope is installed and stateless
compute nodes from the RVA23 media. riscv64 management and service nodes
stay out, because xCAT publishes no openEuler riscv64 packages.
The openEuler guide also says to import the openEuler key on the genimage
build host. A new installation has no key in its RPM keyring.
openEuler stateless images use the rh genimage and dracut modules,
which add the UFTP receiver, and xcat-dep now builds uftp for the
openEuler targets. List openEuler with the supported images and the
uftp package.
Describe how genimage, nodeset, the listener and the booting node work
together, the supported images, the cases that nodeset refuses, and
what a transfer trusts. Describe the listener setup, the firewall and
multicast requirements, service nodes, and the transfer rate and jumbo
frame settings. Add the rootimgtransport attributes of the site and
the osimage to the reference pages.
Describe the .sha256 file that packimage and liteimg write, and how
nodeset has nodes check it. Describe the rootimgchecksum attributes of
the site and the osimage, the upgrade that keeps existing images
unchecked, and the nodeset warning. Describe the checksum that genimage
and nodeset write for an image packed before this release.
The man page said that packimage overwrites the root image and that nodes
cannot use it while packimage runs. Describe the replacement instead, and
the disk space that it needs.
Add the linuximage gpgcheck attribute. When it is set to 1 or yes,
genimage passes --gpgcheck to the shared RPM image builder, which
exports the builder's trusted RPM keys exactly as it does for openEuler
and writes gpgcheck=1 with that gpgkey for the pkgdir, kerneldir and
otherpkgdir repositories. Unset keeps the existing unverified
configuration, openEuler stays always verified, and builders without
the option reject the attribute instead of ignoring it.
Collect the otherpkgs repositories in imgutils so that an otherpkgdir
holding only URLs no longer adds a file:/// repository that fails to
download metadata on EL.
Signed-off-by: Timothy Middelkoop <tmiddelkoop@internet2.edu>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new page describes the ipxe and xnba netboot methods: the files of the
upstream loader, UEFI Secure Boot through the shim and its limits, the
client test, the loader of nodes without a definition, the move of
nodes to the ipxe method and back, and the known limits of the upstream
loader.
The node guide, the noderes, node, group and nodeset pages list the ipxe
method, and the value lists mark xnba deprecated. The examples that
define an x86 node use netboot=ipxe. The mixed cluster and uninstall
guides name ipxe-xcat, and the DHCP validation matrix gets the iPXE
loader rows, Secure Boot included.
Merge current master into the openEuler support branch. Keep native
kernel, DHCP, locale and timezone requirements with the upstream payload
verifier and EL10 package paths. Preserve signed openEuler installation.
Update the native fixtures to check the merged payload contract.
An administrator sets site.cleanupdiskfullxcatpost, deploys a diskfull node, and
/xcatpost is empty. The next updatenode run downloads the postscripts again and
leaves them there. /xcatpost is mode 0755 and most of what lands in it is
world-readable, so material the administrator was told is gone comes back on
every maintenance run and on every reboot.
xcatdsklspost is the script that repopulates /xcatpost on all of those paths, and
it reads only CLEANUPXCATPOST. CLEANUPDISKFULLXCATPOST reaches the node in the
same mypostscript, exported by the site table, and no code reads it. Only
xcatinstallpost does, and that runs once, at install.
Read it in append_xcatpost_cleanup with the rule xcatinstallpost uses: remove the
postscripts when the run returns 0, keep updateflag.awk, and leave everything in
place after a failed run so the node can be examined.
xCAT-test/bats/xcatdsklspost_xcatpost_cleanup.bats captures this. Three of its
six tests fail on the previous commit.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
The guides said riscv64 covered EL10 only, and the riscv64 page listed
Ubuntu as unsupported. Both support matrices now carry the architecture for
Ubuntu, and the riscv64 page describes the Ubuntu paths: the loader copycd
builds from the media, the installer needing none of the accommodations
EL10 requires, the ports archive the packages come from, and a management
node running on riscv64. The 26.04 media need the RVA23 profile, which is
recorded as a limitation.
Signed-off-by: Vinícius Ferrão <2031761+viniciusferrao@users.noreply.github.com>
makentp reads site.ntpbackend to select the NTP daemon, and setupntp takes the same value as
--backend, but no help text names the attribute. An admin who needs ntpd on a host that has
chrony has no way to find out the attribute exists. site.dhcpbackend, which selects the DHCP
implementation the same way, is documented in the site table help.
The site table description in xCAT::Schema now carries ntpbackend beside ntpservers, with its
valid values and the auto default. The makentp man page lists it with the other site attributes
the command honors, and names the setupntp --backend option that carries the value to the nodes.
ntp_backend_selection.t reads the site help from the loaded schema and the makentp pod. Five
assertions fail without this change.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
Explain why the riscv64 templates disable the installer's kdump add-on,
how to reserve memory for crash dumps on an installed node, and what
diskless images reserve by default.
Document the riscv64 kickstart templates that work around the EL10
anaconda's missing RISC-V EFI platform, where grub2.riscv64 and the
riscv64 Genesis packages come from, which dependencies a riscv64
management node takes from the riscv64 dependency repository, and why
xCAT-server only recommends perl-DB_File.
Add the riscv64 page to the cluster management guide (UEFI + grub2 boot
path, discovery through mknb's grub2 network configurations, stateful and
stateless provisioning, the dependency picture for a management node on
riscv64, limitations), list riscv64 in the node object attributes and in
the support matrices, add the architecture to the cross-build page for
stateless images, extend the grub2 install guide (and fix its swapped
x86_64/aarch64 file names), the uninstall package lists, the DHCP backend
validation matrix and the mknb/genimage man pages, and carry the riscv64
schema values into the generated nodetype, osimage, noderes, node and
group references.
Record that a node with more than one BMC is configured one BMC at a
time and that a comma separated value gives one setting per BMC, in
both the man page source and the checked-in text.
Add a new pdutype (genpdu) for PDUs implementing the Raritan PDU2-MIB.
A single MIB covers the Raritan PX2/PX3/PX4/PXC/SRC/PXO/BCM series, the
Server Technology PRO3X/PRO4X series, the Legrand intelligent PDUs, and
all PDUs following the PDU2-MIB.
Supports rpower (whole-PDU and per-outlet), rinv and rvitals over SNMP
v1, v2c or v3, with credentials read from the pdu table).
Unlike the existing types, sensor units and decimal precision are read
from the MIB per sensor rather than hardcoded, so readings are correct
across models that report differing precision for the same sensor.
Outlet switching capability is probed at connect time, so metered-only
models report a single "unsupported" message instead of a per-outlet error.
rspconfig is not supported for genpdu; PDU linking and BCM2/PMC power
meters are out of scope.
Tested on Raritan PX4-5851-E7V2 (fw 4.2.10.5-50400, switched),
PX3-1901U-N1 and PX3-1901U-N1A6 (fw 4.0.20.5-49038, metered), and
PX2-1901U-N1A6 (fw 4.0.20.5-49038, metered).
Signed-off-by: Kilian Cavalotti <kilian@stanford.edu>