dd6c9d0837
Have bmcsetup apply dual-byte bmcport right
...
bmcport can have a space in it. At least work somewhat
with that by removing the special IFS to allow it
2016-05-09 14:24:50 -04:00
4ca5938c4a
Fix issue 437, go to next state when exit shell
2016-04-28 03:33:34 -04:00
04dd30211f
mini refine for genesis script doxcat to have it run into bash if no NIC with IP facing xcat MN found
2016-04-15 03:56:53 -04:00
9869d148ac
Change to recognize newer Lenovo mfg id
2016-04-11 16:06:48 -04:00
322f769271
Merge pull request #891 from bybai/lsf
...
I don't have test environment now. Will merge this and add a comment in defect 445 @bybai
2016-04-07 10:53:15 +08:00
2f7b48f120
fix issue445 deleteraid/configraid enhancement
2016-04-05 03:21:29 -04:00
2dc8cf330d
Eliminate some Genesis boot errors
2016-04-04 15:21:21 -04:00
e47447bc1e
Make genesis to include bmc ip in the findme package
2016-04-01 02:15:43 -04:00
f0d96b30ca
For IBM Power 822LC and 812LC, it seems there is something wrong with
...
the firmware that causes the BMC to stop replying to ping a few seconds
after the changes are made. To work around this issue, sleep 30 before
doing the cold reset. Once the firmware is fixed, this reset is NOT
needed
2016-01-26 09:09:47 -05:00
709a6cb8ad
Fix the formatting of the bmcsetup script.
...
- replace the tabs wiht 4 spaces
- change the if statements to multiple lines to improve readability
2016-01-26 09:00:57 -05:00
c6e663d1fd
Use fifo pipe to enhance getadapter
...
Currently the getadapter implementation store the nics information
in multiple files. This implementaion will store the records in the
database and add the following changes:
1. Add taskstate table to record the getadapter request.
2. Add route_request hook in xcatd to avoid of too much process.
3. Add adapterinfo column to keep the adapter information.
4. Use fifo pipe to send/recv the adapter message and wake up the waiting process.
5. Use alarm signal to handle the timeout event.
2016-01-25 01:53:54 -05:00
c15027d4bb
Merge pull request #452 from hu-weihua/getadapters
...
Cool. Will merge it, eventually.
2015-12-15 12:44:26 +08:00
b0bf7931ac
modify depending on samveen 's comment
2015-11-27 03:02:02 -05:00
1aab9c6227
modify depending on gongjie's comment
2015-11-25 05:25:24 -05:00
acd8570324
modify depending on gongjie's comment
2015-11-24 03:20:10 -05:00
b5717ba88b
fix issue 457: xCAT 2.11 / S822LC: Node Discovery failed due to MTM with spaces
2015-11-24 02:19:34 -05:00
0c74d06835
remove debug info
2015-11-24 01:47:24 -05:00
a381f2ee06
modify depending on gongjie's new comment
2015-11-24 01:44:59 -05:00
cb01dac7ae
modify depending on the comment
2015-11-23 23:18:07 -05:00
2729ec1ec9
used for support getadapters command
2015-11-22 03:37:10 -05:00
eac16d9ce2
Merge pull request #356 from zet809/fs_bmcsetup
...
IBM Power S822LC machine support bmcsetup, build genesis based on Fedora 22 ppc64
2015-11-06 16:36:20 +08:00
307f7958e1
support bmcsetup on Firestone machine, build genesis on Fedora 22 ppc64
2015-11-05 02:07:02 -05:00
ed6427da31
fix xdsh p8euh configraid delete_raid=all hangs when delete raid 0
2015-10-23 08:18:42 -04:00
97ce3ff5c7
fix delete raild failed with wait_for_ipr_device_status: command not found
2015-10-19 04:40:23 -04:00
837552f31a
configraid support scripts
2015-09-29 03:52:33 -04:00
5a98bf491a
restuct diskdiscover as raidutils,raidcmd,diskdiscover
2015-09-25 02:29:37 -04:00
5e92c1762e
add diskdiscover
2015-09-11 03:38:23 -04:00
465fc18b2a
fix bug 4600: p8LE hardware discovery will hung when the first LINK UP nic is not in Management Network
2015-03-19 03:10:47 -04:00
053225fb26
fix bug 4296 :p8le hw discovery error info about syslog and dmidecode
2014-10-15 00:21:48 -07:00
dd636f8108
support firmware update for p8LE
2014-10-10 03:14:52 -07:00
ac34247aba
defect 4726: cold reset bmc for specific firmware in the end of bmcsetup to make bmc take effect.
2014-09-24 03:14:32 -04:00
5576b8b1f4
enhance for finding bootnic in genesis
2014-09-22 20:37:29 -07:00
088ee8e9cd
add an attribute for findme used to check it is running powerNV model
2014-09-10 01:51:06 -07:00
0f4a674527
modify genesis to support system P hardware discovery
2014-09-05 02:10:54 -07:00
7ae7479c3a
support xcat genesis on ppc64: check if the dmidecode exists before run dmidecode
2014-08-21 03:42:12 -04:00
27d8ca563b
Fix BMCPORT specification working with spaces
2014-05-30 11:05:05 -04:00
29457d1177
softlayer install and sysclone working for strangely ordered nics and cross vlan
2014-05-24 05:46:14 -04:00
dbfd2a8909
Merge branch 'master' of ssh://git.code.sf.net/p/xcat/xcat-core
...
sysclone working in softlayer
2014-04-26 18:29:37 -04:00
4cb37a0a7d
sysclone working in softlayer
2014-04-26 18:29:01 -04:00
e2a3db7844
Fix mistakes in bmcsetup
2014-04-25 13:18:39 -04:00
5d13cf0d36
added table put and delete calls to rest api
2014-04-20 18:56:24 -04:00
9d6318d70e
update doxcat to optionally use static ip, but still one problem
2014-04-14 15:56:35 -04:00
4d262b0db4
doxcat: the ntp -c rv 0 offset may return negative number
2014-03-26 16:02:16 -05:00
fe545184b5
gensis-scripts: doxcat - ntpq -c rv state does not work any more, use the ntpq -c rv offset instead
2014-03-26 14:23:28 -05:00
35376641b4
To make bmcsetup cmd to update node status to be [bmcready] in genesis; And make chain mechanism to support [shutdown] key word which is used to poweroff the node
2014-01-13 07:55:03 -05:00
2f17a10f92
added capacity table to store cpu, memory and disk sizes for nodes
2013-12-19 08:25:41 -05:00
2275e87b6f
Try to suppress scary warning at time of checking for bmc port activity
2013-08-20 16:31:53 -04:00
7ac9dae5af
Attempt to fix bmcsetup problem where service processor changes after request to change too late
2013-08-20 15:59:42 -04:00
fa1b9f924b
Correct spelling mistake in xCAT-genesis that got in the way of interface bring up
2013-08-14 08:58:01 -04:00
c6608120cb
Try to bring up extra interfaces for discovery
2013-08-13 13:28:34 -04:00
Jarrod Johnson
XuWei
ertaozh
tingtli
bybai
Mark Gurevich
Victor Hu
chenglch
neo954
huweihua
Xiaopeng Wang
daniceexi
mellor
ligc
Jarrod Johnson
Bruce Potter
ligc
linggao