Promote bind9 from Recommends to Depends on the xcat and xcatsn metapackages. bind9 is
required by makedns, so it must be a hard dependency regardless of the system's APT
recommendation policy -- xCAT manages the cluster DNS through makedns/named, which
makes a DNS server as essential to a management or a service node as the DHCP backend
already declared beside it ("isc-dhcp-server | kea"). As a Recommends it was installed
only while that policy asked for it: an Ubuntu 26.04 management node came up with no
/usr/sbin/named and makedns failing with "failed to start named".
Strip only a trailing third component when deriving the debootstrap suite in the
Ubuntu netboot genimage. The previous s/\.\d+$// also removed the minor from a
two-part osvers, so an initial release with no point-release ISO -- ubuntu26.04, but
equally an initial-release 18.04/20.04/22.04 -- reached debootstrap as a bare major.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
The service node runs mknb directly rather than through xcatconfig, and nothing
looks at what it returned, so a failure leaves the node without a current
Genesis image and says nothing at all.
Check it and say so.
The security response headers added to xcat.conf are wrapped in
<IfModule mod_headers.c>, so they only take effect where mod_headers is loaded.
EL loads it by default and the Debian postinst enables it with a2enmod, but SUSE
apache2 does not load it by default, so the headers stayed inactive there. Enable
it in the RPM %post for the apache2 case, guarded so it is a no-op on EL (where
a2enmod is absent and mod_headers is already loaded).
Verified on openSUSE Leap 15.6: mod_headers is off by default, the hardened
config still starts, and after a2enmod the served response carries all four
security headers. The need to load mod_headers on SUSE was identified in the
lenovobuild branch (660df81379 / xcat.conf.apach24.sles), here done via
a2enmod rather than a separate config file.
Co-authored-by: Jarrod Johnson <10814490+jjohnson42@users.noreply.github.com>
Add standard security response headers (X-Frame-Options, X-Content-Type-
Options, Content-Security-Policy, X-Permitted-Cross-Domain-Policies) to the
/install and /tftpboot directories, mask the server banner with
"ServerTokens Prod", and drop the Includes (SSI) and MultiViews options from
those file-serving directories. Indexes on /install/postscripts, /install/post
and the doc directory are left intact so directory browsing still works where
xCAT relies on it.
The Header directives are wrapped in <IfModule mod_headers.c> so a server
whose mod_headers is not loaded still starts cleanly instead of failing on an
unknown directive. On Debian/Ubuntu, where mod_headers is not enabled by
default, the xCAT and xCATsn package postinst scripts run "a2enmod headers"
before restarting Apache so the headers take effect there as well; on
RHEL/SLES the module is loaded by default and needs no action.
Recovered from the unmerged lenovobuild branch (originals 7ee0c129, 85c8bc09,
d4d1783a), adapted: the deprecated X-XSS-Protection header and the
mod_allowmethods-dependent AllowMethods directive are omitted, and the Header
directives use "set" rather than "append".
Co-authored-by: Jarrod Johnson <10814490+jjohnson42@users.noreply.github.com>
xCAT and xCATsn hard-required elilo-xcat on every non-s390x install. elilo only
provides the ia64 (Itanium) UEFI loader; modern x86-64 UEFI netboot uses
xnba.efi and aarch64 uses grub2, so the dependency pulls a loader no current
platform needs. Drop the Requires (xnba-undi, which the UEFI path does use, is
kept). elilo-xcat can still be installed by hand for legacy ia64.
An OVMF x86-64 UEFI client netboots through xnba.efi with no elilo involved.
Recovered from the unmerged lenovobuild branch (e53b62e0).
Co-authored-by: Jarrod Johnson <10814490+jjohnson42@users.noreply.github.com>
The single flat xcat-core repo serves el8/el9/el10 from one build, but two spec
decisions were resolved at BUILD time and so were wrong for the other ELs that
share the same repo.
1. DHCP backend. xCAT.spec and xCATsn.spec selected the dhcp provider with a
build-time %if (rhel >= 10 -> kea, else dhcpd), so an el10 build wrongly
required kea on el8/el9 (and an el8/el9 build wrongly required dhcpd on
el10). Replace it with an install-time RPM rich dependency:
Requires: (kea if (system-release >= 10) else /usr/sbin/dhcpd)
Requires: (kea-hooks if (system-release >= 10))
dnf now resolves it per client: kea on el10+ (which dropped ISC dhcp from the
distro), dhcpd on el8/el9. SLES has no "system-release" provide, so the
condition is false there and it falls back to /usr/sbin/dhcpd, preserving
prior behavior. system-release is versioned per release package
(el10=10.x, el9=9.x, el8=8.x).
2. openssl. Make the xCAT-server openssl Requires uniform across EL (non-SUSE)
instead of el10-only, so the produced package set does not depend on which EL
the build host happened to be.
Also drop xCAT-genesis-base from the default @PACKAGES set in buildrpms.pl: its
initramfs bundles the build-chroot kernel/glibc and is therefore OS- and
arch-dependent, so it cannot ship in the single flat core. It is now built per
target by the xcat-dep pipeline (mockbuild-all.pl, via
`buildrpms.pl --package xCAT-genesis-base`) and ships in xcat-dep/rh<N>. The
explicit `--package xCAT-genesis-base` build path is retained.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
xcat and xcatsn declared a hard dependency on xcat-genesis-scripts-ppc64. In
an amd64-only build that package is never produced, so apt could not satisfy
the dependency and refused to install xcat. Depend only on the amd64
genesis-scripts package.
Signed-off-by: Daniel Hilst <392820+dhilst@users.noreply.github.com>
The default xCAT Apache configuration shipped with Options Indexes
enabled for the /install and /tftpboot directories. This allowed
unauthenticated users to browse directory listings, disclosing the
full tree of postscripts, boot files, and (in production deployments)
potentially kickstart files with password hashes, custom scripts with
embedded credentials, and cluster topology details.
Replace Options Indexes with -Indexes in all four shipped Apache config
files (MN and SN, Apache 2.2 and 2.4 variants). Direct file access
by known path continues to work, so all provisioning workflows are
unaffected. Directory browsing for /xcat-doc is preserved as it
contains only public documentation.
Additionally, add an Apache hardening guide documenting recommended
permissions for sensitive directories under /install, network binding
best practices, and IP-based access control options.
Addresses #7450
Daniel Hilst
Vinícius Ferrão
Mark Gurevich
cxhong
GONG Jie
Victor Hu
zet809
bybai
Bin Xu
Chuck Brazie
yangsong
Chuck Brazie
GONG Jie
chenglch
Patrick Lundgren
Jarrod Johnson
immarvin
hu-weihua