image2disk only took the boot UUID from a /boot volume. Images captured
from a system without a separate /boot left it unset, and rewriting the
EFI stub grub.cfg failed with "TypeError: sequence item 5: expected str
instance, NoneType found". Fall back to the UUID of the / filesystem,
which holds /boot in that case.
An old stateful OS on LVM was activated at diskless boot and kept the
disk busy, so repartitioning it for scratch failed. Set an empty
auto_activation_volume_list unless the image sets one. Ubuntu also
needs it in the initramfs, whose udev rules activate LVM earlier.
Captured images carried the machine-id of the source system, and images
built with imgutil carry the one generated in the build root, so every
node deployed from a profile shared it. That breaks anything keyed on it,
such as DHCP DUIDs and journal identities.
Capture now stores an empty /etc/machine-id. Diskless boot on EL and SUSE
writes a stable per-node one derived from the node name and the DMI
product UUID, as Ubuntu already does, using openssl since the initramfs
has no sha512sum. Install to disk copies that machine-id into the target
and renames the boot loader entries from the image to it. Otherwise
kernel-install in post.sh adds a second set of entries under another ID.
The installed system kept the initramfs of the image. Ubuntu 26.04
builds it with dracut in host-only mode, so a captured image's initramfs
waits for the source's volume group and filesystem UUIDs and the
installed node ends in emergency mode. Rebuild it in post.sh, as EL does
through kernel-install.
lvm is optional in the capture initramfs now, so installimage printed
'lvm: command not found' on every install of a capture taken from a host
without lvm2. Only run it when it is there.
The plain partitions were addressed by their number on the source system,
while parted numbers them in the order they are created. A source with a
gap, such as swap between filesystems (it is not captured), made
image2disk format the wrong partition and look for swap on one that does
not exist. Count the partitions as they are created instead.
Also look up filesystem UUIDs through one helper.
image2disk.py formatted the target filesystems, copied the image and
ran fixup only in the branch that sets up LVM. For an image whose
filesystems are all plain partitions it created the partitions and
returned success without writing anything, and installimage then failed
on the missing target.
Run that part for both layouts. Plain partitions also need their swap
in fstab by UUID instead of the localstorage-swap volume, and on EL9
and later root= and resume= refer to the new root and swap by UUID as
well, since partition names are not stable with several disks.
When the largest filesystem of a captured image is a plain partition,
it was sized as the disk minus the other filesystems. That ignored the
2048 sector gap before the first partition and the rounding of every
partition up to a 2048 sector boundary, so the last partition always
ran past the end of the disk. The clamp then set its end to the sector
count, one past the last sector and inside the backup GPT, and parted
refused it with 'The location ... is outside of the device'. Images
with the largest filesystem in LVM were not affected.
Reserve that overhead plus 1MiB at the end of the disk for the backup
GPT, and clamp to that last sector instead. Also round the swap
partition by its own size rather than by the previous partition's.
Their scripts run onboot.d and the others, but the profiles did not
have them like el8 and el9. el10 also lacked the syncfiles template,
now linked to el9's like its other shared files, and Ubuntu lacked the
firstboot.custom that its firstboot.sh runs.
imageboot.sh wrote /etc/netplan/10-<iface>-confluentcfg.yaml with the
default mode 0644, and netplan warns that its configuration should not
be accessible by others. confignet already writes its files 0600, but
it leaves an identical file in place, so the boot-time one stayed 0644.
extract_untethered_rootimg reports failure, for example when the image
does not fit into the memory backed root, but imageboot.sh ignored it and
booted into the partly extracted root, which then hung later on. Stop
with a message saying why instead.
An untethered or uncompressed diskless boot downloaded the root image
only from the deployment server and retried it forever when that server
failed. Try the other managers that answered discovery as well, as the
tethered urlmount already does.
urlmount limits each small range request to 10 seconds, but the single
whole-image download cannot take a total limit. Give up on a connect
after 10 seconds and on a transfer that stalls for 30 seconds instead,
so a hung server moves on to the next one.
source_remote imageboot.sh is the last thing the diskless cmdline hook
runs, so returning early on a failed extraction ended the hook and left
dracut to time out. Falling through instead reaches the existing
/sysroot/sbin/init guard, which reports the failure and holds the node so
it stays reachable over ssh, as it did before extraction was checked.
Diskless profiles had the updatestatus callback in onboot.sh commented
out because no suitable status existed: 'complete' clears
deployment.pendingprofile, which the PXE responder requires to answer
the next network boot of a diskless node.
Add a 'booted' status that records the pending profile as
deployment.profile while leaving pendingprofile armed and skipping
autolock, and enable the onboot.sh callback in all diskless profiles.
nodedeploy now shows 'pending: <profile> (booted)' for a running
stateless node.
`unsquashfs` can use multiple CPU cores during image extraction, significantly reducing boot time.
For example the whole boot time from PXE to shell on a 8-core VM, from approximately 45 seconds to 20 seconds.
This PR adds `squashfs-tools` as a dependency. Since the package is smaller than 1 MB, the additional image size is justified by the performance improvement.
For backward compatibility, the existing `cp`-based extraction method is used when `unsquashfs` is unavailable, such as with images built before this change.
The extraction logic has also been moved into the common functions and is now shared between EL9, EL10, and Ubuntu.
Both untethered `squashfs` images and `confluent_multisquash` images are supported.
Images must be rebuilt to include `unsquashfs` and benefit from the faster extraction path.
Apply ruff's safe autofixes.
The changes are mechanical and behaviour-preserving. Issues fixed:
- F401: remove unused imports.
- F841: drop unused local variables and assignments, including discarded
await/return values, unused "except ... as e" bindings, and unused
"with ... as name" targets.
- F541: remove the f prefix from f-strings that contain no placeholders.
- E711: compare against None with "is"/"is not" instead of "=="/"!=".
- E712: test truthiness directly instead of comparing to True.
- E713: use "x not in y" instead of "not x in y".
- E714: use "is not" instead of "not ... is".
- E731: convert lambdas bound to a name into def statements.
- W291/W293: trim trailing whitespace on touched lines.
For one, ensure a unique machine-id. Broadly should be done, but critical for bonds to have unique mac
addressses in event of booting a captured image.
Fix ubuntu slow boot due to waiting forever for a network config. Have the transient network config bake into netplan for
a first pass before confignet comes along to do full configuration.
Clean up spurious error messages about grep true: and device busy on mounting overlay.
Reduce obvious output about skipped devices.
Rule out any read-only device.
Amend minimum size to 2GB.
Among same priority devices, select the smallest target.
A variant of the M.2 RAID enablement kit does not manifest with nvme
driver. Address this by allowing 'nvm' subsystype. to allow blank driver.
Also, to be on the safe side, have self.driver always be a string,
so it can be 'falsey' but still work as a string.
If syncfiles fails, keep it retrying.
Also, slow down sync checking to avoid hammering the system.
Further, randomized delay to spread highly synchronized requestors.
Block attempts to do multiple concurrent syncfile runs.