For one, ensure a unique machine-id. Broadly should be done, but critical for bonds to have unique mac
addressses in event of booting a captured image.
Fix ubuntu slow boot due to waiting forever for a network config. Have the transient network config bake into netplan for
a first pass before confignet comes along to do full configuration.
Clean up spurious error messages about grep true: and device busy on mounting overlay.
Try to find various layers of network config and normalize.
Ultimately, after post subiquity will do some things and easiest to fix in firstboot instead.
IB VFs have the following "ip l" output:
4: ibp129s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc mq state UP mode DEFAULT group default qlen 1000
link/infiniband 00:00:00:8d:fe:80:00:00:00:00:00:00:60:5e:65:03:00:2c:43:c8 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 link/infiniband 00:00:00:8d:fe:80:00:00:00:00:00:00:60:5e:65:03:00:2c:43:c8 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof checking off, NODE_GUID 00:00:00:00:00:00:00:00, PORT_GUID 00:00:00:00:00:00:00:00, link-state enable, trust off, query_rss off
5: eno1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether 30:56:0f:17:c0:b4 brd ff:ff:ff:ff:ff:ff
altname enp196s0
altname enx30560f17c0b4
This breaks the detection script because index 0 of the "vf 0 ..." line is not link/<type> anymore.
This commit improves the detection logic to fix this.
In confluent_osdeploy-aarch64.spec.tmpl, el10 was created as a symlink
to el8, so the subsequent `mv el10/initramfs/usr el10/initramfs/var`
inadvertently renamed el8's usr directory, leaving el8 and el9 (also
symlinked to el8) with hooks at var/lib/dracut/hooks/ instead of
usr/lib/dracut/hooks/. Rocky 9 dracut never found the hooks and dropped
to the emergency shell on all aarch64 nodes.
Use `cp -a el8 el10` as the x86_64 spec already does, so the rename
only affects the el10 copy.
Co-authored-by: Claude <noreply@anthropic.com>
Signed-off-by: Timothy Middelkoop <tmiddelkoop@internet2.edu>
This allows better redirection.
In python3, must write to sys.stdout.buffer. AttributeError for the unlikely event of a python2 based node being deployed.
Add support for a confluent=<host> kernel argument in init-premount: configure networking, flush interfaces, autodetect the primary NIC (saved to /tmp/autodetectnic), verify TLS connectivity to the provided server, call the whoami endpoint over TLS to obtain the node name, and write results to /custom-installation/confluent/confluent.info (with fallback to copernicus on failure).
Also update casper-bottom logic to handle IPv4 manager addresses: for IPv6 the manager is still bracketed and scoped interface resolved as before; for IPv4 the script now uses the previously detected NIC (/tmp/autodetectnic) or falls back to an `ip route get <mgr>` lookup to determine DEVICE. This ensures routed IPv4 deployments work correctly.
If the networking didn't come up well, the 'functions' routines would not be able to handle.
Switch to using apiclient which is designed specifically to handle less cooperative
initial network conditions.
Jarrod Johnson
Jarrod Johnson
Markus Hilger
Timothy Middelkoop
xu_ren_xian