06f22e7acb
Fix unix socket dir creation
2015-10-14 09:53:14 -03:00
2245e53ff1
Fix encoded string problem in InputNTPServer
2015-10-13 15:51:37 -03:00
fbca02e262
Bump version to 1.2
2015-10-13 14:16:02 -04:00
8c4d33db92
Merge remote-tracking branch 'upstream/master'
2015-10-09 15:00:35 -04:00
b1240e327f
Fix validity of underscore in noderange
...
A group name may use underscore in name per xCAT syntax. Fix
grammar to accept _
2015-10-09 14:53:42 -04:00
9b52e276cc
Implement remote KVM command
2015-10-07 14:16:54 -03:00
fa545eeaee
Merge pull request #20 from jufm/ntpconfig
...
Implement NTP config command
2015-10-07 13:12:27 -04:00
5590b4138e
Implement NTP config command
2015-10-07 13:58:38 -03:00
57a3c6d287
Correct behavior when a node is deleted
...
When attribute notification is requested, node deletion was not
sent to the watchers. Address the limitation by notifying on all
attributes for a deleted node.
2015-10-05 09:48:27 -04:00
b88a135602
Have the config.conf autoinit if needed
...
If something makes a call out of sequence, attempt
to auto-init.
2015-09-30 14:21:01 -04:00
1f8bc635a8
Fix erroneous data injection to log replay
...
When a rollover event was detected, the offset
of the rollover event itself was being read
from the rolled file erroneously. Skip to
next loop iteration so that the metadata about
the rollover event is properly ignored in building
the text data buffer.
2015-09-30 13:48:04 -04:00
f78a4d6074
Merge pull request #26 from jjohnson42/windowssupport
...
Support Windows management server
2015-09-30 10:19:54 -04:00
d9ed98d58e
Merge pull request #28 from jjohnson42/jsonrollevent
...
Change rollover event to be JSON
2015-09-30 10:19:34 -04:00
db3320e2ec
Merge pull request #29 from jjohnson42/moveleds
...
Move 'leds' to be a hardware sensor category
2015-09-28 14:44:24 -04:00
03de545e09
Merge branch 'master' into pr/23
2015-09-28 13:40:34 -04:00
fcd0e523a0
Merge pull request #21 from jufm/add_dn
...
Implement domain name command
2015-09-28 13:17:11 -04:00
0ae2b7acc6
Move 'leds' to be a hardware sensor category
...
Rather than 'led' being distinct from 'hardware',
have 'leds' be a category of 'hardware' like 'fans'
or other things similarly hardware related.
2015-09-28 11:20:44 -04:00
c50be7c3f2
Change rollover event to be JSON
...
The log format for other pieces of data is JSON.
Change the rollover event to be consistent. Also
do not record the previous name of the log file,
as that isn't used, and the current filename is
likely to change when it too gets rolled over
so there's no practical use of knowing the
no longer valid name for the transaction.
2015-09-28 10:40:48 -04:00
45f62b5c05
Fix some issues around lock rework
...
Some scenarios were not accomodated correctly
as well as some references not set either.
2015-09-28 10:19:35 -04:00
a0e6e0b5c6
Merge branch 'windowssupport' of git://github.com/jjohnson42/confluent into jjohnson42-windowssupport
...
Additionally, rework locking back to not require any extra files
2015-09-28 09:56:03 -04:00
9975d57d5e
Implement Locking in Windows log code
...
Under windows, we can't use flock. However we can
get locking using msvcrt using different, but related
semantics. Imitate whole file locking by just locking
first byte. We have to make sure we seek() to the same
place when locking and unlocking, as Windows requires
the offset to be same for both operations.
2015-09-25 16:59:42 -04:00
ff213916b6
Handling encoded input strings
2015-09-24 12:08:17 -03:00
dc436fda74
Add log rotation support
...
Add TimedAndSizeRotatingFileHandler which mixes together
the RotatingFileHandler and TimedRotatingFileHandler from
python logging module to process the log data.
Add logrollover event to track the renamed information, so
that console session can read the log data from current log
file and last renamed file.
Global configuration is used by the log handler. The format
of the log section in '/etc/confluent/service.cfg' is like:
[log]
when = m
backup_count = 3
max_bytes = 8192
utc = False
2015-09-23 23:36:46 -04:00
ad20193309
Make confluent and confluentsrv.py identical
...
The two files should be identical. confluentsrv.py exists
only because PyInstaller struggles unless the target is a
'py' file and does not have some namespace conflict with a
module.
2015-09-23 11:58:48 -04:00
0bd9b08be2
Remove extraneous print statements
...
Some debug output was in place, remove it.
2015-09-23 11:54:35 -04:00
a3dcf88749
Fix log path for windows
...
Under windows, the log files were not being written
as expected.
2015-09-23 11:48:29 -04:00
765c15ed5b
Revert 'confluentd' change
...
After further investigation, the rename to confluentd was not
needed (after massaging pathex and using pip to install rather
than distutils).
2015-09-23 11:48:27 -04:00
34960bff22
Add PyInstaller spec file
...
This facilitates a 'onedir' portable format for confluent server.
The 'onefile' mode couldn't be made to work, but this should suffice.
2015-09-23 11:48:23 -04:00
29417d935c
Phase 2 of Windows compatibility
...
More work to try to enable confluent to be frozen by
pyinstaller
2015-09-23 11:48:20 -04:00
b48cd8b685
Implement basic functionality under windows
...
Windows support by removing pid file, daemonizing, locking,
and other features. Goal is to have a freezeable payload.
2015-09-23 11:48:17 -04:00
11d4628458
Add shutdown to power state option
2015-09-21 16:37:32 -04:00
655a0b4d17
Implement update network configuration
2015-09-17 10:03:20 -03:00
668f1c98b6
Make init script properly indicate error conditions.
2015-09-17 08:57:08 -03:00
b1b4ee4634
Implement domain name command
2015-09-14 08:35:57 -03:00
e02dc74eb7
Fix MCI command
2015-09-09 11:47:46 -03:00
e7ff4fdd93
Implement MCI command
2015-09-08 12:24:47 -03:00
419c41e2cc
Add NMI diag command
2015-08-27 10:29:42 -03:00
c20f0dc2ae
Implement reset command
...
Added a reset bmc command in nodes/<node_name>/configuration/management_controller/reset
2015-08-27 10:29:24 -03:00
dc0c7270a4
Changing LEDs structure
2015-08-24 14:47:07 -03:00
2fb63a34ba
Add LED status retrieval.
2015-08-24 09:13:32 -03:00
55c333b198
Add get firmware information.
...
Show OEM firmware information in /nodes/[node]/inventory/firmware/.
2015-08-24 09:12:44 -03:00
87552b9f03
Add an option to disable or enable an IPMI user
2015-08-20 11:51:29 -03:00
e17b9e98a8
Merge pull request #9 from jjohnson42/nodeeventlog
...
Implement 'nodeeventlog' command
2015-08-12 09:23:33 -04:00
57bacd69c1
Prevent broken creation of nodes/groups
...
nodes and groups with '' name are invalid. Avoid
terrible things by erroring out on attempts to even
try at the deepest layer that can guard.
2015-08-11 16:41:13 -04:00
88aa696d29
Implement 'nodeeventlog' command
...
This brings rough parity with reventlog. Note that format does
change in this case, so full backwards compatibility is not retained.
2015-08-11 15:06:11 -04:00
c263c2eebb
Implement list all IPMI users.
2015-08-06 10:28:21 -03:00
cbf595df26
Treating sensors that has status = Unavailable.
2015-07-29 15:58:39 -03:00
ff52ad4740
Implement read network configuration
...
Read network configuration from the endpoint and present
under the management_controller configuration.
2015-07-29 08:17:41 -04:00
3f1d49c30b
Update IPMI user management to enable partial update.
...
Improvements in InputCredential fields validation.
Check for all fields in InputCredential when operation = 'create'.
2015-07-28 14:08:59 -03:00
6e5a7e15d9
Cleanup pid on abnormal exit
...
If unlocking the security keys or loading the
plugins experiences an error, do not leave a
stale pid file behind.
2015-07-28 10:53:15 -04:00
Juliana Motira
Jarrod Johnson
chenglch
Allan Vidal
Lucio Seki