Try to find various layers of network config and normalize.
Ultimately, after post subiquity will do some things and easiest to fix in firstboot instead.
IB VFs have the following "ip l" output:
4: ibp129s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc mq state UP mode DEFAULT group default qlen 1000
link/infiniband 00:00:00:8d:fe:80:00:00:00:00:00:00:60:5e:65:03:00:2c:43:c8 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 link/infiniband 00:00:00:8d:fe:80:00:00:00:00:00:00:60:5e:65:03:00:2c:43:c8 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof checking off, NODE_GUID 00:00:00:00:00:00:00:00, PORT_GUID 00:00:00:00:00:00:00:00, link-state enable, trust off, query_rss off
5: eno1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether 30:56:0f:17:c0:b4 brd ff:ff:ff:ff:ff:ff
altname enp196s0
altname enx30560f17c0b4
This breaks the detection script because index 0 of the "vf 0 ..." line is not link/<type> anymore.
This commit improves the detection logic to fix this.
This allows better redirection.
In python3, must write to sys.stdout.buffer. AttributeError for the unlikely event of a python2 based node being deployed.
When network configuration is applied, wait until we
can reach the deployment server again before exiting.
This should make us more robust against various potential delays after
changing the nature of network interfaces.
Provide a totally 'clortho' and 'copernicus' free behavior.
This allows some flows to skip the cpio addons to go straight to python.
Some scenarios demand the utilities (initramfs) and others are more awkward with the utilities,
so we enable both.
Add missing pre.d directory to let user know they can use such scripts
Preserve console directievs from kernelargs into installed system
Retry umount during image2disk, if processes have the filesystem busy.
Fix DNS behavior during post phase of installtodisk
Invoke confignet properly during firstboot to set up additional interfaces.
Have sshd run during the install from '/sysroot', for convenience
Fix some cosmetic error output for setupssh
If a confluent collective member is stopped, then the
HTTPS check passes. If we end up with a 503 indicating
the other end has a missing confluent, fall back to the loop
to check for other living collective members.
RedHat makes grub redundantly handle serial output that firmware
already handles. If we detect EFI firmware and SPCR ACPI table and
connected serial port, that suggests that firmware will handle.
Ubuntu hates serial console by default, amend it so it can actually
work for serial users.
When the team modes were defined in attributes, it was based on the
teamd names. Since the ecosystem abandoned teamd, we went back to
bond.
However, we neglected to map all the names to the closest bond type equivalent.
Change confignet to do the mapping.
The 'team-slave/bond-slove' type is unneccesary, and
messes up with infiniband.
NetworkManager gets the idea if the 'ethernet' is a bond member without being told explicitly.
In routed deployments, the scan mechanism
will not be available. Fall back to routed
access to the deploy server as indicated
by deploycfg from install time.
Jarrod Johnson
Jarrod Johnson
Markus Hilger
Tinashe
Sorin Toderica