#!/usr/bin/env perl
# IBM(c) 2010 EPL license http://www.eclipse.org/legal/epl-v10.html
#
#############################################################################################################################################
#
#   This script will be used to run xCAT daily regression
#
#   Usage:xCATreg - Run xCAT daily regression
#   xCATreg [-?|-h]
#   xCATreg [-b branch][-m MN][-f configure file][-a][-V]
#
#   -?/-h:  help information for the xCATreg usage.
#   -b: when -b is specified, the regression will be done against the specified branch. You can use 2.7, 2.8,master.The default value is master.
#   -m: when -m is specified, the regression will be done the specified mn. The default value is all the mn in configuration file.
#   -f :specify the configuration file,default value is /xCATreg/regresson.conf
#   -a: when -a is specified, run the regression even there is no code updates
#   -V: log and message in verbose mode
#
#   Example usage:
#   ./xCATreg   Run regressoins on master branch and on all platforms in configuration file
#   ./xCATreg -b 2.8 -m slesmn -f /root/regressoin.conf -a    Run regression on 2.8 branch on slesmn even when there is no code updates.
#
#############################################################################################################################################


use strict;
use warnings;
use Getopt::Long;
use Data::Dumper;
use Term::ANSIColor;
use Time::Local;

BEGIN
{
    $::XCATROOT = $ENV{'XCATROOT'} ? $ENV{'XCATROOT'} : -d '/opt/xcat' ? '/opt/xcat' : '/usr';
}
use lib "$::XCATROOT/lib/perl";

#######################################
# usage for arguments
#######################################
sub usage
{
    print "Usage:xCATreg - Run xcat autotest  test cases.\n
           Explanation for the options:
                                    -b: when -b is specified, the regression will be done against the specified branch. The default value is master.\n
                                    -m: when -m is specified, run regression on the specified mn. The default value is all the mn in configuration file.\n
                                    -f: specify the configuration file location.\n
                                    -U: when -U is specified, only code updates can trigger the regression.\n
                                    -V: log and message in verbose mode.\n
                                    -e: <email_addr>   send the test result to email_addr\n";
    print "  xCATreg [-?|-h]\n";
    print "  xCATreg [-f configure file] [-b branch] [-m mangement node][-V][-e] install mn \n";
    print "  xCATreg [-f configure file] [-b branch] [-m mangement node ] [-U][-V][-e] if code updates there will be regression.\n";
    print "\n";
    return;
}

#######################################
# config for rhppc64env
#######################################
sub config_rhppc64 {
    send_msg("******************************");
    send_msg("Reading Configure");
    send_msg("******************************");
if(!(-e $configfile)){
    send_msg("Warning: The xCAT test Configure file doesn't exist!");
    send_msg("Warning: The xCAT test Configure file doesn't exist!");
    return 0;
    }
  my $sub_type = undef; # The string after $type_
    # Script-->
    #       Script_Prev
    #       Script_Post
    # Table--->
    #       Table_xxxxx
    # Object-->
    #       Object_xxxx
    # System---->
    # Custom---->

    my $name = undef;
    my $attr = undef;
    my $value = undef;
    my $c = 0;
    my $cmd = undef;

    my $mgt_name = undef;
    open(FILE, "$configfile") or die "can't to open $configfile";
    while(my $line = <FILE>) {
        $line = &trim($line);
        next if(length($line) == 0);
        #Table name can not contain "_"
        if($line =~ /\[\s*(\w+)\_(\w+)\s*\]/) {
            $type = $1;
            $sub_type = $2;
            $name = undef;
            $c = 0;
        }elsif($line =~ /\[\s*rhppc64System|Custom\s*\]/){

         $type = "rhppc64Varible";
        }elsif ($type eq "rhppc64Table") {
            ##TABLE BLOCK##
            if($line =~ /(\w+)\s*=\s*([\w\.\-]+)/) {
                $attr = $1;
                $value = $2;
                if($name&&($rhppc64config{table}{$sub_type}{$name}{__KEY__} ne $attr)){
                    $rhppc64config{table}{$sub_type}{$name}{$attr}=$value;
                } else {
                    $name = $value;
                    $rhppc64config{table}{$sub_type}{$name}{__KEY__}=$attr;
                }
   }
        }elsif ($type eq "rhppc64Object") {
            ##OBJECT BLOCK##
            if($line =~ /(\w+)\s*=\s*([\w\.\-]+)/) {
               $attr = $1;
               $value = $2;
               #print "rhppc64node attr is $attr\n";
               #print "rhppc64node value is $value\n";
               if($attr eq "Name"){
                   $name = $value;
               } elsif(!defined($name)){
                   print "Please give name for Object\n";
                   close FILE;
                   return 1;
               } else {
                   $rhppc64config{object}{$sub_type}{$name}{$attr}=$value;
               }
            }
        }elsif ($type eq "rhppc64Script") {
            ##SCRIPT_BLOCK##
            if($sub_type eq "Prev") {
                $rhppc64config{script_prev}->[$c] = $line;
                $c = $c + 1;
            }
            elsif ($sub_type eq "rhppc64Post") {
                $rhppc64config{script_post}->[$c] = $line;
                $c = $c + 1;
            }
        } elsif ($type eq "rhppc64Varible") {
            ##NODE_BLOCK##
            if($line =~ /(\w+)\s*=\s*([\w\.\-\/]+)/) {
                $rhppc64config{var}{$1} = $2;
                print "var $1,$2\n";
            }
        }
}
 if(exists $rhppc64config{object}){
        foreach my $type (keys %{$rhppc64config{object}}){
            foreach my $name (keys %{$rhppc64config{object}{$type}}){
                send_msg("OBJECT:$name,TYPE:$type");
                #print "$name,TYPE:$type \n";
                foreach my $attr (keys %{$rhppc64config{object}{$type}{$name}}){
                    send_msg("    $attr = $config{object}{$type}{$name}{$attr};");
                }
            }
        }
    }
 if(exists $rhppc64config{table}){
    foreach my $type (keys %{$rhppc64config{table}}){
            send_msg("TABLE:$type");
            foreach my $name (keys %{$rhppc64config{table}{$type}}){
                send_msg("    $rhppc64config{table}{$type}{$name}{__KEY__} = $name");
                foreach my $attr (keys %{$rhppc64config{table}{$type}{$name}}){
                    if($attr ne '__KEY__'){
                        send_msg("    $attr = $rhppc64config{table}{$type}{$name}{$attr}");
                    }
                }
               rhppc64 send_msg("\n");
            }
        }
    }
    if(exists $rhppc64config{script_prev}){
         send_msg("Script_Prev:");
         foreach $cmd (@{$config{script_prev}}){
            send_msg("    $cmd");
         }
    }

 if(exists $rhppc64config{script_post}){
         send_msg("Script_Post:");
        foreach $cmd (@{$config{script_post}}){
            send_msg("    $cmd");
        }
    }
if (exists $rhppc64config{var}){
#my $MN=$rhppc64config{var}{MN};
#my $MNIP=$rhppc64config{var}{MNIP};
#&runcmd( "echo $MN $MN.$DOMAIN $MNIP>>/etc/hosts");
#print "MN is $MN\n";}
    send_msg("Varible:");
    foreach my $varname (keys %{$rhppc64config{var}}){
        send_msg("    $varname = $config{var}{$varname}");
#print "var is $rhppc64config{var}\n";
        }
}

 close FILE;
    return 0;

}

#######################################
# install xcat and init rhppc64 env
#######################################
sub init
{
    if (exists $rhppc64config{var}){
        my $MN=$rhppc64config{var}{MN};
        my $MNIP=$rhppc64config{var}{MNIP};
        my $CN=$rhppc64config{var}{CN};
        my $CNIP=$rhppc64config{var}{CNIP};
        my $SN=$rhppc64config{var}{SN};
        my $SNIP=$rhppc64config{var}{SNIP};
        my $SNCN=$rhppc64config{var}{SNCN};
        my $SNCNIP=$rhppc64config{var}{SNCNIP};
        my $HMC=$rhppc64config{var}{HMC};
        my $HMCIP=$rhppc64config{var}{HMCIP};
        my $MOUNTIP=$rhppc64config{var}{MOUNTIP};
        my $DOMAIN=$rhppc64config{var}{DOMAIN};
        my $nodedir=$rhppc64config{var}{nodedir};
        system("xdsh $MN mkdir -p /iso/mountpoint");
        print "--prepareing redhat iso file.......\n";
        print "--mount NF .......";
        system ("scp -r /iso/RHEL6.4-20130130.0-Server-ppc64-DVD1.iso $MNIP:/iso/mountpoint");
        system("xdsh $MN mount -o loop /iso/mountpoint/RHEL6.4-20130130.0-Server-ppc64-DVD1.iso /iso");
       &runcmd( "  echo $HMCIP $HMC.$DOMAIN $HMC>>/etc/hosts.rhppc64");
       &runcmd( "  echo $MNIP $MN.$DOMAIN $MN>>/etc/hosts.rhppc64");
       &runcmd( "  echo $CNIP $CN.$DOMAIN $CN>>/etc/hosts.rhppc64");
       &runcmd( "  echo $SNCNIP $SNCN.$DOMAIN $SNCN>>/etc/hosts.rhppc64");
       system ("scp -r /etc/hosts.rhppc64 $MN:/etc/hosts");
       &runcmd(" cp /etc/resolve.conf /etc/resolve.config.rhppc64");
       &runcmd(" echo nameserver $MNIP >>/etc/resolve.config.rhppc64");
       system ("scp -r /etc/resolve.conf.rhppc64 $MOUNTIP:/etc/resolve.conf");
       print "[OK]\n";
       print "--get the latest XCAT tarball.......\n";
       system("xdsh $MN  rm -rf /etc/yum.repos.d/*");
       system("scp -r  rhel6.4.repo $MN:/etc/yum.repos.d/rhel6.4.repo");        ########  redhat 6.4
       system("xdsh $MN perl $nodedir/xcatbuild/xcat-core/mklocalrepo.sh");
       system("xdsh $MN perl $nodedir/xcatbuild/xcat-dep/rh6/ppc64/mklocalrepo.sh");
       print "--install XCAT .......\n";
       system("xdsh $MN yum clean metadata");
       system("xdsh $MN rpm --import /iso/mountpoint/RPM-GPG-KEY-redhat-release");
       system("xdsh $MN yum -y install xCAT");
       print "--install XCATTEST .......\n";
       system("xdsh $MN yum -y install xCAT-test");

        print "--install createrepo .......\n";
        system("xdsh $MN yum -y install createrepo");
        system("xdsh $MN yum -y install screen");
        system("xdsh $MN yum -y install mysql-server mysql mysql-bench mysql-devel mysql-connector-odbc");
        system("xdsh $MN rm -rf ./result");
        system("xdsh $MN mkdir result");
        system("xdsh $MN sysctl -n net.ipv4.ip_forward=1");
        send_msg( " rhppc64 env is ready\n");
}
  # if($restore){
    #    send_msg("******************************");
     #   send_msg("Backup current xCAT database");
      #  sned_msg("******************************");
      #  &runcmd("mkdir -p /tmp/xCATdbbackup");
      #  &runcmd("dumpxCATdb -p /tmp/xCATdbbackup");
       # if($::RUNCMD_RC != 0){
        #    &send_msg("Fail to backup xCAT database");
         #   &runcmd("rm -rf /tmp/xCATdbbackup");
          #  $restore = 0;
           # return 1;
        #}

  #}
#    send_msg("******************************");
 #   send_msg("Initialize xCAT test evironment");
  #  send_msg("******************************");
     my $cmd = undef;
     foreach $cmd (@{$rhppc64config{script_prev}}){
         send_msg("$cmd");
   #     &runcmd($cmd);
         system("xdsh $MN $cmd");
        if($::RUNCMD_RC != 0){
            &send_msg("Fail to run $cmd");
            return 1;
         }
    }

  if(exists $rhppc64config{object}){
        foreach my $type (keys %{$rhppc64config{object}}){
            foreach my $name (keys %{$rhppc64config{object}{$type}}){
                $cmd = "chdef -t $type -o $name";
                foreach my $attr (keys %{$rhppc64config{object}{$type}{$name}}){
                    $cmd = $cmd." $attr=$rhppc64config{object}{$type}{$name}{$attr}";
                }
                send_msg($cmd);
                my $MN=$rhppc64config{var}{MN};
    #         xdsh $MN  &runcmd($cmd);
                system("xdsh $MN $cmd");
                if($::RUNCMD_RC != 0){
                send_msg("Fail to run var $cmd");
                    return 1;
                }
            }
        }
    }
 if(exists $rhppc64config{table}){
        foreach my $type (keys %{$rhppc64config{table}}){
            foreach my $name (keys %{$rhppc64config{table}{$type}}){
                $cmd = "chtab $rhppc64config{table}{$type}{$name}{__KEY__}=$name";
                foreach my $attr (keys %{$rhppc64config{table}{$type}{$name}}){
                    if($attr ne '__KEY__'){
  $cmd = $cmd." $type.$attr=$rhppc64config{table}{$type}{$name}{$attr}";
                    }
                }
                send_msg($cmd);
#                &runcmd($cmd);
                 system("xdsh $MN $cmd");
                if($::RUNCMD_RC != 0){
                    &send_msg("Fail to run table $cmd");
                    return 1;
                }
            }
        }
    }


    return 0;


}

#######################################
# run all test
#######################################
sub  do_test
{
my $MN=$rhppc64config{var}{MN};
$fullinst=0;
$dsklsinst=0;
$bundlerun=1;
$stateliteinst=0;
$snfullinst=0;
$dsklscnsninst=0;
$fullcnsninst=0;
$statelitecnsninst=0;
print "Start to run diskless installation ...\n";
     send_msg("******************************");
     send_msg("start diskless test");
     send_msg("******************************");
system("xdsh $MN mkdir -p /autotest/result");
if($dsklsinst){
    system("xdsh $MN rm -f /opt/xcat/share/xcat/tools/autotest/testcase/installation/linux_diskless_installation_vm");
    system("xdsh $MN /opt/xcat/bin/xcattest -t Linux_diskless_installation_flat_ppc64");
    $output = system("xdsh $MN ls /opt/xcat/share/xcat/tools/autotest/result/failedcases.*");
    if($output =~ /failedcases.(\d+)/){
        $timestamp=$1;
    }
    system("xdsh $MN mv /opt/xcat/share/xcat/tools/autotest/result/* /autotest/result/");
    $output = ("xdsh $MN tail /autotest/result/xcattest.log.$timestamp");
    if($output =~ /Failed: (\d+)/){
        if($1 != 0){
            $send_msg{linux_diskless_installation_flat}{pass} = 0;
            $send_msg{linux_diskless_installation_flat}{timestamp} = $timestamp;
        } else {
            $send_msg{linux_diskless_installation_flat}{pass} = 1;
        }
    }
}
if($bundlerun){
      print "Start to run the automation test bucket ....\n";
      system("xdsh $MN mkdir -p /autotest/result");
      system("xdsh $MN /opt/xcat/bin/xcattest -b /opt/xcat/share/xcat/tools/autotest/bundle/bat.bundle");
      $output = system("xdsh $MN ls /opt/xcat/share/xcat/tools/autotest/result/xcattest.log.*");
      if($output =~ /xcattest\.log\.(\d+)/){
          $timestamp = $1;
         }
      system("xdsh $MN mv /opt/xcat/share/xcat/tools/autotest/result/* /autotest/result/");
      system("xdsh $MN cp /autotest/result/xcattest.log.$timestamp /autotest/result/log/xcattest.log.$timestamp.current");
      $output = ("xdsh $MN tail /autotest/result/xcattest.log.$timestamp");
if($output =~ /Total: (\d+) , Failed: (\d+)/){
    $send_msg{command}{total} = $1;
    $send_msg{command}{fail} = $2;
    $send_msg{command}{timestamp} = $timestamp;
    if($send_msg{command}{fail} != 0){
        $send_msg{command}{failcase} = "|                         |        |  Failed cases:"."\n";
        $output = (xdsh $MN cat /autotest/result/failedcases.$timestamp | grep END);
        while($output =~ /END::(\w+)/g){
            $send_msg{command}{failcase} = $send_msg{command}{failcase}."|                         |        |    ".$1."\n";
#           print "$msg{command}{failcase}";

       }
            print "$send_msg{command}{failcase}";
   }
}
}
if($stateliteinst){
    system("xdsh $MN /opt/xcat/bin/xcattest -t Linux_statelite_installation_flat_ppc64");
    $output = (xdsh $MN ls /opt/xcat/share/xcat/tools/autotest/result/failedcases.*");
    if($output =~ /failedcases\.(\d+)/){
         $timestamp = $1;
    }
    system(xdsh $MN mv /opt/xcat/share/xcat/tools/autotest/result/* /autotest/result/");
    system(xdsh $MN cp /autotest/result/xcattest.log.$timestamp /autotest/result/log/xcattest.log.$timestamp.current");
    $output = xdsh $MN tail /autotest/result/xcattest.log.$timestamp;
    if($output =~ /Failed: (\d+)/){
        if($1 != 0){
            $send_msg{linux_statelite_installation_flat}{pass} = 0;
            $send_msg{linux_statelite_installation_flat}{timestamp} = $timestamp;
        } else {
            $send_msg{linux_statelite_installation_flat}{pass} = 1;
        }
    }

}
if($fullinst){
    system("xdsh $MN /opt/xcat/bin/xcattest -t Linux_full_installation_flat_ppc64");
    $output = xdsh $MN ls /opt/xcat/share/xcat/tools/autotest/result/failedcases.*;
    if($output =~ /failedcases\.(\d+)/){
         $timestamp = $1;
    }

    system(xdsh $MN mv /opt/xcat/share/xcat/tools/autotest/result/* /autotest/result/");
    system(xdsh $MN cp /autotest/result/xcattest.log.$timestamp /autotest/result/log/xcattest.log.$timestamp.current");
 $output = xdsh $MN tail /autotest/result/xcattest.log.$timestamp;
    if($output =~ /Failed: (\d+)/){
        if($1 != 0){
            $send_msg{linux_full_installation_flat}{pass} = 0;
            $send_msg{linux_full_installation_flat}{timestamp} = $timestamp;
        } else {
            $send_msg{linux_full_installation_flat}{pass} = 1;
        }
    }

}
if($snfullinst){
    system("xdsh $MN /opt/xcat/bin/xcattest -t Linux_sn_installation_flat_x86_vm");
    $output = xdsh $MN ls /opt/xcat/share/xcat/tools/autotest/result/failedcases.*;
    if($output =~ /failedcases\.(\d+)/){
         $timestamp = $1;
    }
    xdsh $MN mv /opt/xcat/share/xcat/tools/autotest/result/* /autotest/result/;
    xdsh $MN cp /autotest/result/xcattest.log.$timestamp /autotest/result/log/xcattest.log.$timestamp.current`;
    $output = xdsh $MN tail /autotest/result/xcattest.log.$timestamp;
    if($output =~ /Failed: (\d+)/){
        if($1 != 0){
            $send_msg{linux_sn_installation_flat}{pass} = 0;
            $send_msg{linux_sn_installation_flat}{timestamp} = $timestamp;
        } else {
            $send_msg{linux_sn_installation_flat}{pass} = 1;
        }
    }

}
if($dsklscnsninst){
    system("xdsh $MN /opt/xcat/bin/xcattest -t Linux_cn_with_sn_diskless_installation_flat_x86_vm");
    $output = xdsh $MN ls /opt/xcat/share/xcat/tools/autotest/result/failedcases.*;
    if($output =~ /failedcases\.(\d+)/){
         $timestamp = $1;
    }
    xdsh $MN mv /opt/xcat/share/xcat/tools/autotest/result/* /autotest/result/;
    xdsh $MN cp /autotest/result/xcattest.log.$timestamp /autotest/result/log/xcattest.log.$timestamp.current;
    $output = xdsh $MN tail /autotest/result/xcattest.log.$timestamp;
    if($output =~ /Failed: (\d+)/){
        if($1 != 0){
            $send_msg{linux_cn_with_sn_diskless_installation_flat}{pass} = 0;
            $send_msg{linux_cn_with_sn_diskless_installation_flat}{timestamp} = $timestamp;
        } else {
            $send_msg{linux_cn_with_sn_diskless_installation_flat}{pass} = 1;
        }
    }

}
if($statelitecnsninst){
    system("xdsh $MN /opt/xcat/bin/xcattest -t Linux_cn_with_sn_statelite_installation_flat_x86_vm");
    $output = xdsh $MN ls /opt/xcat/share/xcat/tools/autotest/result/failedcases.*;
    if($output =~ /failedcases\.(\d+)/){
         $timestamp = $1;
    }
    xdsh $MN mv /opt/xcat/share/xcat/tools/autotest/result/* /autotest/result/;
    xdsh $MN cp /autotest/result/xcattest.log.$timestamp /autotest/result/log/xcattest.log.$timestamp.current;
    $output = xdsh $MN tail /autotest/result/xcattest.log.$timestamp;
    if($output =~ /Failed: (\d+)/){
        if($1 != 0){
            $send_msg{linux_cn_with_sn_statelite_installation_flat}{pass} = 0;
            $send_msg{linux_cn_with_sn_statelite_installation_flat}{timestamp} = $timestamp;
        } else {
            $send_msg{linux_cn_with_sn_statelite_installation_flat}{pass} = 1;

     }
    }
}
if($fullcnsninst){
    system("xdsh $MN /opt/xcat/bin/xcattest -t Linux_cn_with_sn_full_installation_flat_x86_vm");
    $output = xdsh $MN ls /opt/xcat/share/xcat/tools/autotest/result/failedcases.*;
    if($output =~ /failedcases\.(\d+)/){
         $timestamp = $1;
    }
    xdsh $MN mv /opt/xcat/share/xcat/tools/autotest/result/* /autotest/result/;
    xdsh $MN cp /autotest/result/xcattest.log.$timestamp /autotest/result/log/xcattest.log.$timestamp.current;
    $output = xdsh $MN tail /autotest/result/xcattest.log.$timestamp;
    if($output =~ /Failed: (\d+)/){
        if($1 != 0){
            $send_msg{linux_cn_with_sn_full_installation_flat}{pass} = 0;
            $send_msg{linux_cn_with_sn_full_installation_flat}{timestamp} = $timestamp;
        } else {
            $send_msg{linux_cn_with_sn_full_installation_flat}{pass} = 1;
        }
    }

}
system("mkdir -p $nodedir/result");
system("scp -r $MN:/autotest/result $nodedir/result");

}

#######################################
# mn_install to install all mn 
#######################################
sub mn_install {
    my osimage="management_1408a";
    my mn="the_name_of_mn";

    `nodeset $mn osimage=$osimage`;

    $output = system("rpower $mn off");
    do {
         sleep 5;
         $output = system("rpower $mn state");
    } while ($output =~ /off/);

    $output = system("rpower $mn on");
    do {
         sleep 5;
         $output = system("rpower $mn state");
    } while ($output =~ /on/);

    do (
         sleep 5 * 60;
         $output = system("xdsh $mn date");
    } while ($output =~ /$mn/);
}

#######################################
# runcmd
#######################################
sub runcmd {

    my ($cmd) = @_;
    my $rc = 0;
    $::RUNCMD_RC = 0;
    my $outref = [];
    @$outref = `$cmd 2>&1`;
    if ($?)
    {
        $rc = $? ;
    $::RUNCMD_RC = $rc;
    }
    chomp(@$outref);
    return @$outref;

}

#######################################
# trim
#######################################
sub trim {

   my $str = shift @_;
   if($str){
#       $str =~ s/\#/__wellnumber__/g;
       $str =~ s/^\s+|#.+|\s+$//g;
 #      $str =~ s/__wellnumber__/#/g;
   }
   return $str;
}

#######################################
# send messages
#######################################
sub send_msg {
    my $msg = shift;
        print "xcatreg message: $msg.\n";
}
#######################################
# read_conf
#######################################
sub read_conf{
    my %confkeys;
        my $keys;
        if (!open($keys, "<$confile")) {
            send_msg("Open configuration file error");
        }
        my $line;
        while ($line = <$keys>) {
            if ($line =~ /end/) {
                    last;
                }
                if ($line =~ /^\s*log\s*=\s*(\S*)\s*/) {
                    $confkeys{log} = $1;
                }
                if ($line =~ /^\s*mailgroup\s*=\s*(\S*)\s*/) {
                    $confkeys{mailgroup} = $1;
                }
                if ($line =~ /^\s*srcdir\s*=\s*(\S*)\s*/) {
                    $confkeys{srcdir} = $1;
                }
                if ($line =~ /^\s*rhpdir\s*=\s*(\S*)\s*/) {
                    $confkeys{rhpdir} = $1;
                }
                if ($line =~ /^\s*slespdir\s*=\s*(\S*)\s*/) {
                    $confkeys{slespdir} = $1;
                }
                if ($line =~ /^\s*aixdir\s*=\s*(\S*)\s*/) {
                    $confkeys{aixdir} = $1;
                }
                if ($line =~ /^\s*rhxdir\s*=\s*(\S*)\s*/) {
                    $confkeys{rhxdir} = $1;
                }
                if ($line =~ /^\s*slesxdir\s*=\s*(\S*)\s*/) {
                    $confkeys{slesxdir} = $1;
                }
                if ($line =~ /^\s*ubuntudir\s*=\s*(\S*)\s*/) {
                    $confkeys{ubuntudir} = $1;
                }
                if ($line =~ /^\s*xcattestconf\s*=\s*(\S*)\s*/) {
                    $confkeys{xcattestconf} = $1;
                }

    }
    return %confkeys;
}


################################################################Main function######################################################################################


#######################################
# step 0. Parse input arguments
#######################################
my $rootdir = "$::XCATROOT/share/xcat/tools/autotest";
my $needhelp  = 0;
my $configfile = "$::XCATROOT/share/xcat/tools/autotest";
my $branch = 0;
my $configfile = "$rootdir/default.conf";
my $management_node = undef;
my $verbose_mode = 0;
my $updates_regression = 0;
my $send_msg = 0;
my $ret = 0;
my $string1 = undef;
if (
    !GetOptions("h|?"  => \$needhelp,
                "f=s" => \$configfile,
                "b=s" => \$branch,
                "m=s" => \$management_node,
                "V" => \$verbose_mode,
                "U" => \$updates_regression,
                "e=s" => \$send_msg)
 )
{
    &usage;
    send_msg("PARSE ARGUMENTS returns error, exit");
    exit 1;
}
if ($needhelp)
{
    &usage;
    exit 0;
}

#######################################
# step 1. Read configuration files
#######################################
my %confhash = read_conf();
unless (%confhash) {
    send_msg(" returns error, exit");
    exit;
}


#######################################
# step 2. git update  
#######################################
send_msg("begin to do git update");

my $gitup;
$gitup="/tmp/gitup";

#Do checkout in git repo
$res = system(cd $confkeys{srcdir});
if ($res !=0) {
    send_msg("no source code directory,exit");
    exit;
}

$res = system("git checkout $branch");
if ($res != 0){
    send_msg("git checkout failed");
    exit 1;
#}

$res = system("git pull >$gitup");
if ($res != 0){
    send_msg("git pull failed");
    exit 1;
}

$res = system("grep 'Already up-to-date' $gitup");
if (($res == 0)&&( $updates_regression == 1)) {
  send_msg("code is already at latest version. exit regresson\n");
  exit 1;
}


#######################################
# step 3. Install MNs
#######################################
#$res = mn_install();
#if ($res) {
#    send_msg("INSTALL MNS returns error, exit");
#    exit;
#}

#######################################
# step 4. Copy code to MNs
#######################################
##will modify to $confkeys{srcdir};
my $codedir = "/regression/code";

##will modify to $rhppc64config{var}{MNIP} 
my $mn="aixmn"

#install dep for buildlocal
$res = system("xdsh $mn yum install -y rpm-build perl-Time-HiRes perl-DBI createrepo");

#need to copy /etc/hosts to mn
system("scp /etc/hosts $mn:/etc");

system("echo begin copy code");
$res = system("scp -r   root\@$mn:/");
if ($res != 0){
    send_msg("code copy failed");
    exit 1;
}


#######################################
# step 5. Build xcat code in MNs
#######################################
#for temp usage
system("echo began build xcat on mn");
#will changed /code/xcat-core to $confkeys{srcdir}  
$res = system("xdsh $mn /code/xcat-core/buildlocal.sh CURDIR=/code/xcat-core");
if ($res != 0){
          send_msg("build failed on mn");
          exit 1;
      }

system("echo build done");

sleep 20;

#######################################
# step 6. Read xCAT MN's configuration
#######################################
mkdir $resultdir unless -d $resultdir;
my $timestamp = `date +"%Y%m%d%H%M%S"`;
my %rhppc64config=();
my %slesppc64config=();
my %rhx8664config=();
my %slesx8664config=();
my @osname = &runcmd("uname -a");
if ( $osname [0]  =~ /^Linux\s*/  &&  -f "/etc/redhat-release" && $osname [0] =~ /ppc64/){
    print "ppc64 redhat env\n";
    $os="rhels6.4";
    $arch="ppc64";
    print "os is $os,arch is $arch\n";
    $res = &config_rhppc64();
if ($res) {
    send_msg("CONFIGURE MN returns error, exit");
    exit;
}
}

#######################################
# step 7. Genrate local configuration file for xcattest
#         Do test
#         Write log
#######################################
# step 7.1 Install xcat and init mn
$res = &init;
if ($res != 0){
    goto EXIT;
}

$res = &do_test();
if ($res) {
    send_msg("DO TEST returns error, exit");
    exit;
}

#######################################
# step 8. process result 
#######################################
$res = pro_result();
if ($res) {
    send_msg("PROCESS RESULT returns error, exit");
    exit;
}





